Commit Graph

207 Commits

Author SHA1 Message Date
Vladimir Serbinenko 39bbc8cb97 Kconfig: Hide DYNAMIC_CBMEM.
Only one setting actually works (exact value depends on board). So
no need to show it.

Change-Id: I2a85719264bbac07791ef6a9279590ba768c309e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7359
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
2014-11-09 02:03:24 +01:00
Edward O'Callaghan 9b63c9bde2 src/Kconfig: Don't treat warns as errors on Clang builds yet
Currently clang/llvm builds are not fully supported. As such,
let us tone down treating errors as warnings until we actually
build the entire tree.

Change-Id: If7f90f9887e27250f5e6d73d1692505676be9d47
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7230
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
2014-10-28 23:02:28 +01:00
Isaac Christensen d2044ccdc0 reg_script: default to n for ARCH_X86
The reg_script functionality is only used by specific chipsets so have
it selected instead of defaulting to y for ARCH_X86.

Change-Id: I8fb9466e148eed7896ca8ed80755c77ba1190583
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/7006
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-10-22 03:57:51 +02:00
Vladimir Serbinenko c21e07385f i945: Consolidate FADT code
Change-Id: I076cba7d21926cabf90d485de50268ae40c435f3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7087
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-18 10:35:38 +02:00
Stefan Reinauer 6023ca4970 Kconfig: move SMBIOS related options to SMBIOS table option
Change-Id: I74943d0248f49796b9d31d6ed827c69f8cea13a5
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7090
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17 14:37:13 +02:00
Stefan Reinauer 58470e39b3 Kconfig: clean up options in top level and device menu
Move generic options to the "General Setup" menu.
Move device specific options to the "Devices" menu.

Change-Id: I514a021305d43f026b24fd3016477300700ed401
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7089
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2014-10-17 14:36:53 +02:00
Vladimir Serbinenko a9db82fbaf smbios: Mark laptops as such
Change-Id: I179a4cede2f826f72a400208748798737216c01a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7071
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
2014-10-16 17:42:25 +02:00
Vladimir Serbinenko 822bc65b0e ACPI: Remove CONFIG_GENERATE_ACPI_TABLES
As currently many systems would be barely functional without ACPI,
always generate ACPI tables if supported.

Change-Id: I372dbd03101030c904dab153552a1291f3b63518
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4609
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-16 12:01:10 +02:00
Edward O'Callaghan a296f9e3d3 Kconfig: Allow native vga init to be selectable for SeaBIOS payload
Change-Id: I1508f3d3c56cb9afbf4a23355831549552a62866
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6891
Tested-by: build bot (Jenkins)
Reviewed-by: Kevin O'Connor <kevin@koconnor.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-10-04 07:44:49 +02:00
Furquan Shaikh 2af76f4bdc coreboot arm64: Add support for arm64 into coreboot framework
Add support for enabling different coreboot stages (bootblock, romstage and
ramstage) to have arm64 architecture. Most of the files have been copied over
from arm/ or arm64-generic work.

Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://chromium-review.googlesource.com/197397
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 033ba96516805502673ac7404bc97e6ce4e2a934)

This patch is essentially a squash of aarch64 changes made by
these patches:

d955885 coreboot: Rename coreboot_ram stage to ramstage
a492761 cbmem console: Locate the preram console with a symbol instead of a sect
96e7f0e aarch64: Enable early icache and migrate SCTLR from EL3
3f854dc aarch64: Pass coreboot table in jmp_to_elf_entry
ab3ecaf aarch64/foundation-armv8: Set up RAM area and enter ramstage
25fd2e9 aarch64: Remove CAR definitions from early_variables.h
65bf77d aarch64/foundation-armv8: Enable DYNAMIC_CBMEM
9484873 aarch64: Change default exception level to EL2
7a152c3 aarch64: Fix formatting of exception registers dump
6946464 aarch64: Implement basic exception handling
c732a9d aarch64/foundation-armv8: Basic bootblock implementation
3bc412c aarch64: Comment out some parts of code to allow build
ab5be71 Add initial aarch64 support

The ramstage support is the only portion that has been tested
on actual hardware. Bootblock and romstage support may require
modifications to run on hardware.

Change-Id: Icd59bec55c963a471a50e30972a8092e4c9d2fb2
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6915
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-09-23 18:10:32 +02:00
Edward O'Callaghan aca67ed0d2 payloads/external/SeaBIOS: Bump version to 1.7.5
Change-Id: Ie4b58b739ea411035b1801348e3e73e607299846
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6900
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-09-14 21:03:19 +02:00
Martin Roth 4d7d25f38a payloads/external/SeaBIOS: Allow setting buffers below 0xC0000
Add the option to coreboot to set the SeaBIOS buffers below 0xC0000.
This is a requirement on the Intel Rangeley processor
because it is designed so that only the processor can write
the higher memory areas.  This prevents USB and SATA from bus-mastering
into the buffers when they're set in the typical 0xE0000 area.

This will be set to Y unless defaulted to N by the mainboard or
chipset.

Push the SeaBIOS buffers down to 0x90000 segment for Mohon Peak

Change-Id: I15638605d1c66a2277d4b852796db89978551a34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-12 23:16:29 +02:00
Gabe Black 51edd54738 ARM: Generalize armv7 as arm.
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.

Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>

ARM: Split out ARMv7 code and make it possible to have other arch versions.

We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.

The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.

Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)

Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.

Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
2014-09-08 18:59:23 +02:00
Vladimir Serbinenko 2d7bd8a6eb Implement ACPI in a per device way
This approach avoids having same basic tables 150-lines mantra over 100 times
in codebase.

Change-Id: I76fb2fbcb9ca0654f2e5fd5d90bd62392165777c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6801
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-05 22:53:26 +02:00
Vladimir Serbinenko f1d6e7e2cb Move baytrail-specific config to baytrail.
Stop polluting first screen of all boards.

Change-Id: I1ab88075722f7f0d63550010e7c645281603c9c3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6548
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-15 00:52:48 +02:00
Idwer Vollering ab11a6a94c payloads/external/SeaBIOS: move build directory
Move SeaBIOS' build directory out of build/
This allows the user to delete build/ in the top dir
and keep the built binary in payloads/external/SeaBIOS/seabios/out/

Change-Id: Ia7d515cd7e349beebcd9b62c9d956137acb73c82
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/6460
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-14 21:23:51 +02:00
Stefan Reinauer 7cb01e0bcf drivers: Add I2C TPM driver to coreboot
On ARM platforms the TPM is not attached through LPC but through I2C.
This patch adds an I2C TPM driver that supports the following chips:
 * Infineon SLB9635
 * Infineon SLB9645
In order to select the correct TPM implementation cleanly, CONFIG_TPM
is moved to src/Kconfig and does the correct choice.

Old-Change-Id: I2def0e0f86a869d6fcf56fc4ccab0bc935de2bf1
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/167543
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit b4049a0e96f6335a93877e1e884f9a440487c421)

i2c tpm: Remove mostly useless delay code/tables.

I assume from the code in the TPM driver that the TPM spec defines
different types of delays and timeouts which each have a particular
duration, and that the TPM can tell you how long each type is if you ask
it. There was a large table, some members of a data structure, and a
function or two which managed the timeouts and figured their value for
different operations.  The timeout values for the various "ordinals"
were never set in the vendor specific data structure, however, and
always defaulted to 2 minutes.  Similarly the timeouts a, b, c, and d
were never overridden from their defaults.  This change gets rid of all
the timeout management code and makes the "ordinal" timeout 2 minutes
and the a, b, c, and d timeouts 2 seconds, the larger of the two default
values.

This is a port from depthcharge to coreboot, original change:
https://chromium-review.googlesource.com/#/c/168363/

Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>

Old-Change-Id: I79696d6329184ca07f6a1be4f6ca85e1655a7aaf
Reviewed-on: https://chromium-review.googlesource.com/168583
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit b22395a73f361c38626911808332a3706b2334fe)

TPM: Stop requesting/releasing the TPM locality.

The locality is requested when the TPM is initialized and released when
it's cleaned up. There's no reason to set it to the same thing again and
restore it back to the same value before and after every transaction.

forward ported from https://chromium-review.googlesource.com/#/c/168400

Old-Change-Id: I291d1f86f220ef0eff6809c6cb00459bf95aa5e0
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: https://chromium-review.googlesource.com/168584
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cc866c20c6f936f349d2f1773dd492dca9bbf0c1)

Squashed three commits for the i2c tpm driver.

Change-Id: Ie7a50c50fda8ee986c02de7fe27551666998229d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6519
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10 22:25:48 +02:00
Daniele Forsi 53847a211b src/.../Kconfig: various small fixes to texts
Fixed spelling and added empty lines to separate the help
from the text automatically added during make menuconfig.

Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7
Signed-off-by: Daniele Forsi <dforsi@gmail.com>
Reviewed-on: http://review.coreboot.org/6313
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-23 09:07:47 +02:00
Kyösti Mälkki b393fa09e5 AGESA S3: Fix ACPISCRATCH in CBMEM
After commit

  2ca2afe ACPI S3 support: Add acpi_s3_resume_allowed()

ACPISCRATCH region in CBMEM was no longer allocated, causing
AGESA platforms to fail S3 resume.

IS_ENABLED() did not evaluate true here with non-zero parameter.

Also avoid multiple defined defaults for HIGH_SCRATCH_MEMORY_SIZE.

Change-Id: Id99e4bee91581b8ac3d1ec44763b2d792b721832
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/6093
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
2014-06-25 06:23:07 +02:00
Paul Menzel 18600aa1ef payloads/external/SeaBIOS: Upgrade stable from 1.7.2.1 to 1.7.4
SeaBIOS 1.7.4 was released in December 2013 [1] and, besides other
things, supports writing debug messages to CBMEM console.

The new SeaBIOS Kconfig option `DEBUG_COREBOOT` has to be added to the
SeaBIOS configuration file `.config` as otherwise the SeaBIOS build
from within coreboot (`PAYLOAD_SEABIOS`) is interrupted as it is
detected as a new option.

This option was already added and enabled in commit 7c1a49bc [1]

	SeaBIOS: have coreboot pass the choice to run optionroms in parallel

so SeaBIOS messages are now written to the CBMEM console.

Successfully tested on the Asus M2V-MX SE.

[1] http://seabios.org/Releases
[2] http://review.coreboot.org/5443

Change-Id: I675a50532735b4921a664e4b24d98be17b9a1002
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5093
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-28 22:41:59 +02:00
Patrick Georgi fadbe5f657 build: make scan-build work again
This drops the scan-build related Kconfig options
since it's now possible to simply run

    scan-build [-o outdir] make

and get coreboot built with its report.

There's also no inner make process anymore, and the way
things work should be clearer now.

Also adapt abuild to this new reality.

Change-Id: I03e03334761ec83f718b3235ebf811834cd2e3e3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5774
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-17 21:15:14 +02:00
Furquan Shaikh a3b06c99d0 Arch-level Kconfig menu cleanup
Remove arch-level Kconfig menu option as it shows all available architectures in
make menuconfig. Instead pull the bootblock options for choice and update image
to top-level Kconfig since it is already present for both x86 and arm.

Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5673
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-05-10 14:32:26 +02:00
Martin Roth a6427161c2 Intel FSP: add a shared set of functions for the FSP
- Move the non chipset-specific fsp pieces out of the chipset into a
shared area.  This is used by northbridge / southbrige / SOC code.  It
pulls in pieces from Kconfig, Makefile and FSP specific code.
- Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP"

Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-09 21:35:56 +02:00
Furquan Shaikh 99ac98f7e1 Introduce stage-specific architecture for coreboot
Make all three coreboot stages (bootblock, romstage and ramstage) aware of the
architecture specific to that stage i.e. we will have CONFIG_ARCH variables for
each of the three stages. This allows us to have an SOC with any combination of
architectures and thus every stage can be made to run on a completely different
architecture independent of others. Thus, bootblock can have an x86 arch whereas
romstage and ramstage can have arm32 and arm64 arch respectively. These stage
specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain
and compiler flags for every stage.

These options can be considered as either arch or modes eg: x86 running in
different modes or ARM having different arch types (v4, v7, v8). We have got rid
of the original CONFIG_ARCH option completely as every stage can have any
architecture of its own. Thus, almost all the components of coreboot are
identified as being part of one of the three stages (bootblock, romstage or
ramstage). The components which cannot be classified as such e.g. smm, rmodules
can have their own compiler toolset which is for now set to *_i386. Hence, all
special classes are treated in a similar way and the compiler toolset is defined
using create_class_compiler defined in Makefile.

In order to meet these requirements, changes have been made to CC, LD, OBJCOPY
and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others.
Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the
toolsets are defined using create_class_compiler.

Few additional macros have been introduced to identify the class to be used at
various points, e.g.: CC_$(class) derives the $(class) part from the name of
the stage being compiled.

We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER
as they do not make any sense for coreboot as a whole. All these attributes are
associated with each of the stages.

Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5577
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-05-06 20:23:31 +02:00
Kyösti Mälkki 5687fc9d21 Declare recovery and developer modes outside ChromeOS
Move the implementation for recovery and developer modes from
vendorcode/google/chromes to lib/.

Change-Id: I33335fb282de2c7bc613dc58d6912c47f3b5c06c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4308
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-01 15:38:41 +02:00
Furquan Shaikh 20f25dd5c8 Rename coreboot_ram stage to ramstage
Rename coreboot_ram stage to ramstage. This is done in order to provide
consistency with other stage names (bootblock, romstage) and to allow any
Makefile rule generalization, required for patches to be submitted later.

Change-Id: Ib66e43b7e17b9c48b2d099670ba7e7d857673386
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5567
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26 13:27:09 +02:00
Furquan Shaikh 817149643c Get rid of HAVE_INIT_TIMER config option
There is redundancy in terms of use of init_timer. We have a Kconfig option to
decide whether a board has init_timer as well as we use a stub for init_timer in
places where we do not have any init_timer defined. Thus, remove the Kconfig
option. Henceforth, all boards that do not have init_timer functionality can
include a stub_timer if required.

Change-Id: I35d38ec686f4dc92861cf9248f9b540323cd98ae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5569
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26 13:25:28 +02:00
Patrick Georgi 9b0de71459 buildsystem: check for coreboot toolchain by default
Other toolchains just don't cut it.

Change-Id: I7a0bdf60d89b5166c9a22c9e9f3f326b28f777b8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4584
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-04-16 08:20:06 +02:00
Idwer Vollering 7c1a49bcc0 SeaBIOS: have coreboot pass the choice to run optionroms in parallel
Introduce the tunable CONFIG_SEABIOS_THREAD_OPTIONROMS.

Change-Id: Ifd4d9fca7316eb739ff184e54bdc1cdb0262f0c6
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/5443
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-07 11:54:26 +02:00
Kyösti Mälkki deb2cb27e9 Static CBMEM / CAR: Flag boards with BROKEN_CAR_MIGRATE
Use of CAR_GLOBAL is not safe after CAR is torn down, unless the
board properly implements EARLY_CBMEM_INIT.

Flag vulnerable boards that only do cbmem_recovery() in romstage on S3
resume and implementation with Intel FSP that invalidates cache before
we have a chance to copy the contents.

Change-Id: Iecd10dee9b73ab3f1f66826950fa0945675ff39f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5419
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-04-01 11:36:00 +02:00
Duncan Laurie 7274800ea3 Add a generic register script handler
This is based on the RCBA configuration setup from haswell.
It handles PCI, BARs, IO, MMIO, and baytrail-specific IOSF.
I did not extend it to handle MSR yet but that would be another
potential register type.

There are a number of approaches to this kind of thing, but in the
end they have a lot of switch statements and a mass of #defines.
I'm not particularly set on any of the details so comments welcome.

BUG=chrome-os-partner:23635
BRANCH=rambi
TEST=emerge-rambi chromeos-coreboot-rambi

Change-Id: Ib873936ecf20fc996a8feeb72b9d04ddb523211f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175206
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Tested-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/4923
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04 16:31:14 +01:00
Vladimir Serbinenko cf6c9cc29c Kill ALT_CBFS_LOAD_PAYLOAD
Not used anymore.

Change-Id: Icf3a4a7f932776981048b805478582ad2b784182
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/5132
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-25 20:03:49 +01:00
Kyösti Mälkki 970ad70763 console: Add drivers/uart
Also move UART related Kconfig options from top-level file.

Change-Id: I4e407977cff6f6506f991600c98d6d264676d3f8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5230
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17 20:45:27 +01:00
Peter Stuge 4d77ed9d99 Kconfig: Move vendorcode menu up from the bottom to above Chipset menu
Change-Id: Ic97a497a634533f44d94df297ca6e35d94c34565
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/5160
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-11 21:37:29 +01:00
Aaron Durbin 9a7d7bcea5 baytrail: add initial support
The initial Bay Trail code is intended to support
the mobile and desktop version of Bay Trail. This support
can train memory and execute through ramstage. However,
the resource allocation is not curently handled correctly.
The MRC cache parameters are successfully saved and reused
after the initial cold boot.

BUG=chrome-os-partner:22292
BRANCH=None
TEST=Built and booted on a reference board through ramstage.

Change-Id: I238ede326802aad272c6cca39d7ad4f161d813f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/168387
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4847
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-31 16:36:59 +01:00
Aaron Durbin 75e297428f coreboot: config to cache ramstage outside CBMEM
Haswell was the original chipset to store the cache
in another area besides CBMEM. However, it was specific
to the implementation. Instead, provide a generic way
to obtain the location of the ramstage cache. This option
is selected using the CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
Kconfig option.

BUG=chrome-os-partner:23249
BRANCH=None
TEST=Built and booted with baytrail support. Also built for
     falco successfully.

Change-Id: I70d0940f7a8f73640c92a75fd22588c2c234241b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172602
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/4876
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-30 06:04:02 +01:00
Aaron Durbin 6ac3405fdf x86: include optional reference code blob in cbfs
In order to incorporate external blobs into
CBFS besides MRC have a notion of a reference code
blob. By selecting HAVE_REFCODE_BLOB and providing
the file name the refcode blob will be added to
cbfs as a stage file.

BUG=chrome-os-partner:22866
BRANCH=None
TEST=Using this option and other patches able to build,
     boot, and run blob code.

Change-Id: I472604d77f4cb48f286b5a76b25d8b5bfb0c7780
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174423
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/4895
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-01-30 05:49:47 +01:00
Vladimir Serbinenko 2657e84109 Multiboot: remove multiboot tables generation.
GRUB2-as-payload doesn't use them. Libpayload can live with just coreboot tables
if loaded as payload. memtest86+ can use them but is buggy with them. Solaris
needs a huge boot archive not supported by coreboot and too big to fit in
flash (dozens of megabytes). All-in-all looks like no users are left for this.

Change-Id: Id92f73be5a397db80f5b0132ee57c37ee6eeb563
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4628
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-01-23 20:37:48 +01:00
Kyösti Mälkki 107f72e674 Re-declare CACHE_ROM_SIZE as aligned ROM_SIZE for MTRR
This change allows Kconfig options ROM_SIZE and CBFS_SIZE to be
set with values that are not power of 2. The region programmed
as WB cacheable will include all of ROM_SIZE.

Side-effects to consider:

Memory region below flash may be tagged WRPROT cacheable. As an
example, with ROM_SIZE of 12 MB, CACHE_ROM_SIZE would be 16 MB.
Since this can overlap CAR, we add an explicit test and fail
on compile should this happen. To work around this problem, one
needs to use CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig and
define a smaller region for WB cache.

With this change flash regions outside CBFS are also tagged WRPROT
cacheable. This covers IFD and ME and sections ChromeOS may use.

Change-Id: I5e577900ff7e91606bef6d80033caaed721ce4bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4625
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-01-15 15:26:48 +01:00
Kyösti Mälkki 0946190e15 AMD K8 (rev-F): Always have RAMINIT_SYSINFO
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO,
so have the option enabled together with K8_REV_F_SUPPORT.
Also move the option under AMD K8.

Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4582
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-29 19:45:50 +01:00
Vladimir Serbinenko 113a366848 Add GRUB2 payload to build system
Since a long time GRUB 2 is a viable payload alternative to SeaBIOS and
FILO. So make it easy for coreboot users to use GRUB 2 as a payload by
integrating it into coreboot’s build system, so it can be selected in
Kconfig.

As the last GRUB 2 release 2.00 is too old and has several bugs when
used as a coreboot payload only allow to build GRUB 2 master until a new
GRUB release is done. The downside is, that accidental breakage in
GRUB’s upstream does not affect coreboot users.

Currently the GRUB 2 payload is built with the default modules which
results in an uncompressed size of around 730 kB. Compressed it has a
size of 340 kB, so it should be useable with 512 kB flash ROMs.

Tested with QEMU.

Change-Id: Ie75d5a2cb230390cd5a063d5f6a5d5e3fab6b354
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4058
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-11-19 01:07:25 +01:00
Kyösti Mälkki 2644793ef4 Have option of timestamps, CBMEM console and usbdebug for most boards
As boards without EARLY_CBMEM_INIT do not initialize CBMEM in romstage,
and have no CAR migration, these features are available for ramstage only.

Change-Id: Ic3f77ccdedd4e71ba693619c02c9b98b328a0882
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3970
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-15 13:15:18 +02:00
Kyösti Mälkki f8bf5a10c5 Revert "CBMEM: Always have early initialisation"
This reverts commit de1fe7f655.

While things appeared to work, there were actually invalid references
to CAR storage after CAR was torn down on boards without
EARLY_CBMEM_INIT. It was discussed use of CAR_GLOBAL should be
restricted to boards that handle CAR migration properly.

Change-Id: I9969d2ea79c334a7f95a0dbb7c78065720e6ccae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3968
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-10-14 17:16:22 +02:00
Kyösti Mälkki de1fe7f655 CBMEM: Always have early initialisation
Assume EARLY_CBMEM_INIT=y everywhere and remove option from Kconfig.

If romstage does not make the cbmem_initialize() call, features like
COLLECT_TIMESTAMPS and early CBMEM_CONSOLE will execute during
romstage, but that data will get lost as no CAR migration is
executed.

Change-Id: I5615645ed0f5fd78fbc372cf5c3da71a3134dd85
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3917
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-09-21 06:26:54 +02:00
Kyösti Mälkki ecd8424919 Fix whitespace leaked into tree
Clean whitespace errors that have gotten past lint-stable-003-whitespace
and gerrit review.

Change-Id: Id76fc68e9d32d1b2b672d519b75cdc80cc4f1ad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3920
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-09-17 21:04:35 +02:00
Patrick Georgi 16ae95c4bc Add Kconfig options for Linux as payload
These allow to define a kernel image, initrd and command line.

Change-Id: I40155b812728a176b6d15871e1e6c96e4ad693c8
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3893
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
2013-08-31 08:58:39 +02:00
Patrick Georgi 2f39eae41d Remove NRV2B compression support
It wasn't even hooked up to the build system anymore.

Change-Id: I4b962ffd945b39451e19da3ec2f7b8e0eecf2e53
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/3892
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
2013-08-31 08:58:37 +02:00
Patrick Georgi 1e44c3ff5a Fix lint-stable target
SEABIOS_PS2_TIMEOUT needs a default, otherwise the "allyesconfig" target
hangs in an endless loop.
The given default is correctly overridden by the (currently sole) user,
the lenovo/x60 target.

Change-Id: I3f5e347c29ccbb4d711a489d067b6c909f030bd0
Reported-by: Kyösti Mälkki
Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com>
Reviewed-on: http://review.coreboot.org/3874
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
2013-08-16 10:32:43 +02:00
Peter Stuge f040858ec3 payload/SeaBIOS: Add SEABIOS_PS2_TIMEOUT Kconfig variable
This allows mainboards to preconfigure a ps2-keyboard-spinup
timeout when SeaBIOS is chosen as the payload.

The Kconfig option can be changed manually if CONFIG_EXPERT is set.

Change-Id: I5732b18ef04f4bdef6236f35039656ad02011aec
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://review.coreboot.org/3734
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-08-15 20:46:21 +02:00
Kyösti Mälkki 3be80cce29 usbdebug: Add option for verbose logging of connection
Add option to log changes in USB 2.0 EHCI debug port connection.
For romstage move usbdebug as the last initialised console so one
actually can see these messages.

Init order of consoles in ramstage is undetermined and unchanged.

Change-Id: I3aceec8a93064bd952886839569e9f5beb6c5720
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/3387
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-10 18:45:34 +02:00