Allows ACPI SSDT generator to hide the device from Windows via _STA
Change-Id: I41fc7f847ef08138cb0f430bfd1a170f209163f1
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77681
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allows ACPI SSDT generator to hide the device from Windows via _STA
Change-Id: I19f0a5a72ec409b306be7bc4bb53425870fc6298
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Allows ACPI SSDT generator to hide the device from Windows via _STA
Change-Id: Idb5d2cd6eca2a2746e89a371005332e9f621df83
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77675
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allows ACPI SSDT generator to hide the device from Windows via _STA
Change-Id: I22b3ccc2c89a3f7ababd0eaf4e35604880aa0ce7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This patch ensures that the LidStatus UPD is passed a dynamic value,
rather than always passing 1 (CONFIG_RUN_FSP_GOP enabled) for FSP 2.0
devices.
Problem statement:
* FSP-S GFX PEIM initializes the on-board display (eDP) even when the
LID is physically closed, because LidStatus is always set to 1.
* FSP-S skips external display initialization even when the LID is
closed.
Solution:
* FSP-S GFX PEIM module understands the presence of an external display
if LidStatus is not set, and tries to probe the other display
endpoint.
* Statically passing LidStatus as always enabled (aka 1) does not
illustrate the exact device scenarios, so this patch updates
LidStatus dynamically by reading the EC memory map offset.
BUG=b:299137940
TEST=Able to build and boot google/rex to redirect the display
using external HDMI monitor while LID is closed.
Change-Id: I7d7b678227a6c8e32114de069af8455b8c1aa058
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
initramfs is built always, ignoring CONFIG_LINUXBOOT_BUILD_INITRAMFS
Built initramfs only is CONFIG_LINUXBOOT_BUILD_INITRAMFS is set
BUG = N/A
TEST = Built and boot facebook monolith
Change-Id: I0d575ff7528fceb06b5394642527713bb071c8b3
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77607
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Without part no. in CBI, mainboard_get_dram_part_num returns null.
To prevent passing this null pointer to strcmp and avoid unexpected
behavior, proper handling is necessary.
BUG=none
TEST=emerge-brya coreboot
Change-Id: I47e42376c6b1347c56afaec218aed63c5469f0aa
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77646
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add data.vbt file for yavilla recovery image. Select INTEL_GMA_HAVE_VBT
for yavilla which currently have a VBT file.
BUG=b:298320552
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I72f98181b3487f8ae9acf6e0f2382a0204f7989c
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Rename pci_rom_acpi_fill_vfct() to ati_rom_acpi_fill_vfct() to make
it clear that the function is only used for AMD/ATI VGA option ROMs.
Change-Id: I0e310dd2d7a0432918861632e09a23e162082ea5
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77634
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AMD's Windows display drivers validate the checksum of the VBIOS data
in the VFCT table (which gets modified by the FSP GOP driver), so
ensure it is set correctly after copying the VBIOS into the table if the
FSP GOP driver was run. Without the correct checksum, the Windows GPU
drivers will fail to load with a code 43 error in Device Manager.
Thanks to coolstar for root causing the issue.
TEST=build/boot Win11 on google/skyrim (frostflow), ensure GPU driver
loaded and functional.
Change-Id: I809f87865fd2a25fb106444574b619746aec068d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Instead of reporting all I2C controllers in the system as enabled in the
corresponding ACPI device's _STA method, report the I2C devices that are
disabled in the devicetree as disabled in the corresponding _STA method
too. This is done by returning the contents of the STAT variable inside
each device's scope in the DSDT that have a default value of 0 (device
not present/disabled). For all enabled and hidden I2C devices
i2c_acpi_fill_ssdt gets called which then writes 0xf (device enabled and
visible) or 0xb (device enabled, but hidden) to the STAT name inside the
same scope, but in the SSDT. This object in the SSDT will then override
the default in the DSDT resulting in the _STA method returning the
correct status of each device. The code was inspired by
commit 7cf9c74518 ("soc/amd/*: Fix UART ACPI device status").
TEST=On Mandolin all I2C controllers are disabled and with this patch
none shows up in the Windows 10 device manager. When enabling an I2C
controller in the devicetree for testing, it shows up again in the
Windows device manager.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4cd9f447ded3a7f0b092218410c89767ec517417
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
With kernel 5.15, puff hangs during power idle tests because
the NIC does not enter ASPM L1.2. We add "enable_aspm_l1_2" in
devicetree for RTL8111H to enable ASPM L1.2.
BUG=b:268859220, b:279618219
TEST=emerge and run power.Idle
Change-Id: I129dfd79e8112191453be513b2e3a260429b3030
Signed-off-by: Alexis Savery <asavery@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77570
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A workaround was added for puff to assert/deassert the #ISOLATE pin
during suspend/resume to resolve the situation where the realtek
ethernet device cannot enter L1.2 mode when its ASPM is disabled.
The realtek driver has since been fixed and ASPM of realtek devices have
been enabled on kernel 5.10 and 5.15 and this original workaround
is now causing suspend/resume errors on kernel 5.15:
r8169 0000:01:00.0: Unable to change power state from D3cold to D0,
device inaccessible
Puff devices were originally shipped with kernel 4.19, and applying
this change to the firmware on a device running 4.19 causes
suspend/resume failures, basically reversing the problem. We are
upreving the puff kernel to 5.15 so we need this patch, but since
it is incompatible with 4.19 we will have to take that into
consideration when pushing new firmware and potentially will need
to backport the necessary fixes to 4.19.
BUG=b:268859220
TEST=suspend_stress_test -c 500 on wyvern
Change-Id: I5eead2d70cd9528b3ca3fadd11f98c0330601324
Signed-off-by: Alexis Savery <asavery@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77378
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
The AMD team is large enough to handle it on their own :)
Change-Id: I58bc265d9ecfdcb8904f32fbc917877211b7f658
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77609
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Per the PSP team, this field in the transfer buffer isn't used anymore
and always set to zero, causing devices to incorrectly report having
pre-production silicon.
Change-Id: Ida4bf4b9328ac83d905e4c3f822e6ceabe9be79d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77630
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
We don't have file for the fuse chain, but we need to set the level
for some cases.
Change-Id: Idb546f761ae10b0d19a9879a9a644b788828d523
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
The board uses soldered down LPDDR4, so process their SPD files, and add
the SPD for Micron MT53E512M32D1NP-046WTB provided by Micron.
Signed-off-by: Johannes Hahn <johannes-hahn@siemens.com>
Change-Id: I978b7450b106b86eef322df8b33df41e038599eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77349
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Configure the AUX pins as NC based on the FW_CONFIG setting when
the C1 port is not present.
BUG=b:294456574
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I24fb8f16c2e3b05edf1056b5687ae5ea28c022c0
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Restore TPERST_HIGH to 160ms since it has beed validated in other
OEM projects and haven't heard any issue so far.
This change back commit d710c6d5a7 ("mb/google/nissa/var/yavilla: Adjust WLAN_PERST_L power sequence").
BUG=b:295277868
TEST=emerge coreboot
boot to system and check wifi connection is fine
Change-Id: Ifc66e596fc7b6efdc0c286ee187969c8774bdc80
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Currently pirrha's digitizer pen uses GPP_F12 for I2C HID interrupt
signal. But its IRQ number is the same as GPD2, which is used as
EC_SYNC_IRQ.
It caused EC driver loading error from dmesg:
cros_ec_lpcs GOOG0004:00: Failed to request IRQ 98: -16
cros_ec_lpcs GOOG0004:00: couldn't register ec_dev (-16)
cros_ec_lpcs: probe of GOOG0004:00 failed with error -16
So change the digitizer pen interrupt type to GpioInt to prevent
the conflict.
BUG=b:292134655
TEST=Verified EC driver reported no error and pen device worked
Change-Id: Ieb88e87fcfb06544a4b5b5133b752aa821fab76a
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77346
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on schematics and gpio table of pirrha, generate overridetree.cb
to configure internal devices and generate fw_config.c to override
GPIO configurations following FW_CONFIG.
BUG=b:292134655
TEST=FW_NAME=pirrha emerge-nissa coreboot chromeos-bootimage
Change-Id: I91013b0ad89e26f0a4c433c305c6b883d000f042
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77116
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jimmy Su <jimmy.su@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Convert camel case macros to uppercase and underscore separated macros,
such as:
PCI_DID_CyP_6SERIES_WIFI -> PCI_DID_CP_6SERIES_WIFI
PCI_DID_TyP_6SERIES_WIFI -> PCI_DID_TP_6SERIES_WIFI
This makes the macros more consistent with the rest of the code and
easier to read.
Change-Id: I9c739aab93dc0d043a3c9d9ce799087952c1e20b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77644
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch refactors the existing MRC cache storing logic, which was
spread between the ROM and RAM stages, into a single early MRC cache
store stage. The only exception is when SoC user selects
FSP_NVS_DATA_POST_SILICON_INIT to store MRC cache from ramstage (after
FSP-S).
It reverts all the boot-state logic previously used to locate and store
MRC cache from NVS HOB into NVS because majority of the platform can
potentially use the early MRC cache store with improved memory caching
at the pre-RAM phase (with the ramtop implementation).
The only exception is the Xeon SP platform, which currently locates
the MRC cache post in FSP-S (at ramstage). Therefore, this patch
provides an API to the FSP 2.x silicon init code to perform late
storing of the MRC cache.
In majority cases the updated logic, the romstage (post FSP-M) will
attempt to save the MRC cache. Platform that selects
FSP_NVS_DATA_POST_SILICON_INIT config performs the same operation post
FSP-S. Depending on whether the MRC_STASH_TO_CBMEM config is
enabled, the MRC cache will either be written directly to NVRAM at the
romstage or stashed into CBMEM for a late NVRAM write at ramstage.
Below table captures the change in the boot state w/ and w/o this
patch for storing the MRC cache. Overall the goal is to ensure the
platform behavior is remain unchanged before and after this patch.
w/o this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | BS_DEV_INIT | BS_DEV | BS_DEV |
| DATA_POST | CHIPS_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | BS_PRE | BS_DEV | BS_DEV |
| w/o above | DEVICE_ENTRY | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
w/ this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | Post FSP-S | BS_DEV | BS_DEV |
| DATA_POST | (ramstage) | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | Post FSP-M | BS_DEV | BS_DEV |
| w/o above | (romstage) | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
BUG=b:296704537
TEST=Able to build and boot google/rex without any boot time impact.
Change-Id: Id1e91d25916594f59d1e467a142f5042c6138b51
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77556
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Specify the default path to, and automatically include the FSP binaries
needed to boot a board if USE_AMD_BLOBS is selected. Simplifies board
configs, and matches use in previous patforms.
TEST=build/boot google/skyrim
Change-Id: Ic837d264327723c8dc18a60fb16e8d41fe38b44e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77625
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Automatically include the FSP binaries needed to boot a board if
USE_AMD_BLOBS is selected. Simplifies board configs, and matches
use in soc/amd/picasso.
TEST=build/boot google/guybrush
Change-Id: I5b6e34085410a2aafe5d7876be5097f28f521ce8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77624
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch renames `SAVE_MRC_AFTER_FSPS` config to
`FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon
SP FSP implementation, where the FSP Silicon Init API produces
Non-Volatile Storage (NVS) instead of the FSP-Memory Init API.
According to the FSP 2.x specification (section 11.3), the FSP
populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and
expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB
after the FspMemoryInit() API in API mode.
However, not all Intel SoC platforms that support the FSP 2.x
specification adhere to this requirement. For example, the FSP binary
for XEON SP platform produces NVS data (aka
FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API.
Therefore, attempting to locate NVS data after the FspMemoryInit() API
on these platforms would result in an error. The `save_mrc_data.c`
implementation provides the required hooks to locate the NVS post
FSP-Silicon Init and store into Non-Volatile Storage.
BUG=b:296704537
TEST=Able to build and boot Intel Xeon SP w/o any functional impact.
Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Setting SaGvWpMask to SAGV_POINTS_0_1_2 in dev tree can effectively
avoid the idle hang issue, but it will affect the system power.
(Before root cause, this is a short term workaround to unblock function test.)
BUG=b:287170545
TEST=Able to idle for more than 5+ hours without any hang.
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Change-Id: I0947815ab79b470d2ae922cffdd8250c60cf1afd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77520
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Use all available cores to speed up building the documentation.
As $(SPHINXOPTS) has no default in `Makefile.sphinx`, we can
communicate it to all sub-makes via `export`.
Change-Id: I25996f17348505722f3489a15a975de620331b5a
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Original-reviewed-on: https://review.coreboot.org/c/coreboot/+/77363
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
With the introduction of a new Linux version a problem has appeared
after a software initiated reset via CF9h register. The problem
manifests itself in the fact that the Linux kernel does not start after
the reboot. The problem is solved by setting bit 3 to 1 in Reset Control
Register (I/O port CF9h). This leads to the fact that the PCH will drive
SLP_S3 active low in the reset sequence. It leads to the same behavior
as in commit 04ea73ee78 ("siemens/mc_apl3: Set Full Reset Bit into
Reset Control Register") explained.
Change-Id: Ibc6d538c939e38732f42995d5ec6c8b61f979a6a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77603
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As a preparation for WiFi SAR table addition, adding hook for it.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Ia313cfddec278e6bf8498407b242c027a5891deb
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77598
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove SD_ABSENT since it's not being used, and CBI FW_CONFIG
in current build does not reflect this config neither.
BUG=b:291155207
TEST=emerge-rex coreboot
Change-Id: Icfa472ff5570ac728038ec67a762289407760812
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77596
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add variant of NAU8318(SPK) + NAU88L25B(Headphone) audio support
on brya and skolas board.
In fw_config settings, reuse max98360_enable_pads[] due to
identical i2s configurations as nau8318.
In addition, separated GPP_R7 as SPK_BEEP_EN pin.
BUG=b:236561637
TEST=emerge-brya coreboot
BRANCH=none
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Suggested-by: David Lin <CTLIN0@nuvoton.com>
Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com>
Change-Id: Ife47a83fca902cf63e09d11206e9d99fac0dc9a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Matt DeVillier