These values were originally hard-coded in the AMD MCT wrapper.
Change-Id: I12056d38d5348e70a44c192385e22e715e207792
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8454
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
TEST: Boot with corrupted CMOS and make sure console level defaults
to SPEW, instead of 0, and that cbmem console is not empty.
Change-Id: I8ab2423e99bbe116f52ad27f4b20427d8557f6ff
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8379
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
A set of pins can be configured for GPIO or (parallel) PCI bridge use.
When requested configuration is 0:14.4 enabled, register programming
must be done before attempting to enumerate devices behind the bridge.
When requested configuration is 0:14.4 disabled, we must not even
temporarily enable pins for PCI use to avoid spurious GPIO state changes.
As our PCI subsystem currently does not configure visible PCI bridges
that are marked disabled, we cannot mark 0:14.4 disabled just yet but
need to handle pcengines/apu1 as a special case.
Drop related dead code.
Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Keep the slower HyperTransport configuration for a possible reference
in fam15 boards.
Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5101
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
The PCI id defaults to 1106,3230 -> via chrome 9 ...
Tested on the board.
Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
This resolves an issue on Shanghai dual CPU configurations where
the APs on node 0 would not start. Single CPU configurations are
unaffected by this issue.
TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified
proper BSP/AP start and microcode patch levels.
Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8397
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB
flash variants. Let's allow using the whole region instead of the
gm45 default of 1 MiB.
Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Reviewed-on: http://review.coreboot.org/8392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR.
Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8024
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
The port is based on the x230 / t530.
Tested - is in active use.
Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8359
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Keep the value that is listed first, it also the one with a more
recent change.
Change-Id: I0336c962544d75f94512563c08f280aa43c7a175
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8336
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Include microcode updates in CBFS for every CPU revision the platform
can support, as changing to different CPU revision should not require
a coreboot rebuild.
This increases CBFS usage from 2 kB to 14 kB.
Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4521
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Test:
Single Opteron 2419 with 1GB RAM in slot A1
Booted Ubuntu Linux 14.04 and verified all 6 cores were visible
Brief stress test of all 6 cores simultaneously
Verified proper ACPI power states for all 6 cores
Change-Id: I1e598e36f9eaed5ba8a18b9c62ceedee16870f15
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8311
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
OC2 at port 4 was missing. Verified with RCBA dump.
Change-Id: Ide5701d53aeee28619204c7ac408662626aa11e4
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8304
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
thinkpad_acpi checks that BIOS version matches some pattern.
Report version in this form.
same as http://review.coreboot.org/4650 /
63acd22dc5
Change-Id: I82d7a2b9f2ec56557b3a9c26d1af57ed39e31850
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8302
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Status:
Tested with KFSN4-DRE PCB v1.04G
Booted Ubuntu Linux 14.04 and all onboard peripherals appear to work.
Dual Opteron 8347 CPUs tested with 8GB RAM (4GB per bank).
Dual Opteron 8356 CPUs tested with 1GB RAM in slot A1.
AMD PowerNow! functions correctly via ACPI.
Video, network, USB, SATA, and serial have received thorough testing.
Tested with KFSN4-DRE PCB v1.05G
Single Opteron 2419 CPU tested with 1GB RAM in slot A1.
Booted to PXE configuration menu; not tested further.
Known issues:
RAM initialization is a bit flaky with multiple high-density modules;
this could be a generic MCT training issue but is probably bad hardware.
The XGI Volari option ROM crashes SeaBIOS v1.7.5, but the video device
works after Linux boots and initializes the device.
Suspend/resume functions at the S1 level but sometimes hangs on resume.
Wake on LAN can be flaky; the strap(s) needed to have WoL work on power
application were not physically installed by ASUS so the board needs to
boot at least once after power application before it will work.
Change-Id: I0709f822eea8ed877f55db9443143028a5400472
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8270
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Drop the implementation of statically allocated high memory
region for CBMEM. There is no longer the need to explicitly
select DYNAMIC_CBMEM, it is the only remaining choice.
Change-Id: Iadf6f27a134e05daa1038646d0b4e0b8f9f0587a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7851
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
The name was always obscure and confusing. Instead define cbmem_top()
directly in the chipset code for x86 like on ARMs.
TODO: Check TSEG alignment, it used for MTRR programming.
Change-Id: Ibbe5f05ab9c7d87d09caa673766cd17d192cd045
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7888
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
This replaces need for separate cbmemc_reinit() calls made
via CAR_MIGRATE() and in ramstage.
Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7859
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
To maintain consistancy with southbridge/amd/agesa/hudson rename
pi/avalon to pi/hudson in advance of adding support for the
base hudson southbridge.
Change-Id: Icff8c4c06aae2d40cbd9e90903754735ac3510c3
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8251
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
This patch has a basic structure of vboot2 integration. It supports only Nyans,
which have bootblock architecture and romstage architecture are
compatible from linker's perspective.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I4bbd4d0452604943b376bef20ea8a258820810aa
Original-Reviewed-on: https://chromium-review.googlesource.com/204522
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit a6bce0cbed34def60386f3d9aece59e739740c58)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I63ddfbf463c8a83120828ec8ab994f8146f90001
Reviewed-on: http://review.coreboot.org/8160
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This reverts the revert commit 5780d6f387
and fixes the build issue that cuased it to be reverted.
Verstage will host vboot2 for firmware verification.
It's a stage in the sense that it has its own set of toolchains,
compiler flags,
and includes. This allows us to easily add object files as needed. But
it's directly linked to bootblock. This allows us to avoid code
duplication for stage loading and jumping (e.g. cbfs driver) for the
boards
where bootblock has to run in a different architecture (e.g. Tegra124).
To avoid name space conflict, verstage symbols are prefixed with
verstage_.
TEST=Built with VBOOT2_VERIFY_FIRMWARE on/off. Booted Nyan Blaze.
BUG=None
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Iad57741157ec70426c676e46c5855e6797ac1dac
Original-Reviewed-on: https://chromium-review.googlesource.com/204376
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 27940f891678dae975b68f2fc729ad7348192af3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a83b87c29d98d97ae316091cf3ed7b024e21daf
Reviewed-on: http://review.coreboot.org/8224
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This must be committed at the same time as the corresponding
depthcharge change which updates the fmap.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=Build samus firmware.
dump_fmap -h /build/samus/firmware/image.bin shows PD_MAIN_A and
PD_MAIN_B sections.
Boot samus. 'crossystem mainfw_act' -> A
As root, 'crossystem fwb_tries=1'
Reboot samus. 'crossystem mainfw_act' -> B
CQ-DEPEND=CL:208984,CL:*169850,CL:208989
Original-Change-Id: Ibccec8b82ba22c61248a79023f42b92e4763403e
Original-Signed-off-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208899
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit d241e1dddaf8a435e49e08e60e4ad998735d2137)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ida8f7bd68d71e2a4a47e304b8f8283b566c52837
Reviewed-on: http://review.coreboot.org/8219
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
In order to ensure that we meet timing requirements for the SSD
power sequencing delay bringing the SSD out of reset until after
memory training.
BUG=chrome-os-partner:29914
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: I807e3d3698255287c3fe7219f44e8ec9a0985df1
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208155
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 1cf557049c49e1ba11ade1eee7a45fc2b075ff3d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib39a14a03e04a167fab45b58b3bc840eb4bcf317
Reviewed-on: http://review.coreboot.org/8215
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
- Turn on keyboard backlight early in boot (not resume) path
as a sign of life for the system
- Add ACPI device for keyboard backlight so the kernel can find
and make use of it
BUG=chrome-os-partner:30586
BRANCH=None
TEST=build and boot on samus
Original-Change-Id: Iecaef0ec5c814774e19d7c4a14cb92dc236cfee3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/208152
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit e166f76f9bd167468c7637dcce2b9eabf7dce8f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I47927d97c1586ec09310d014d8fba7d7a3d773c4
Reviewed-on: http://review.coreboot.org/8213
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Configuration for GNB GPP was incorrect, only PCIe x1 cards worked.
Change-Id: I369bf6382080e6034ff138ac664c76b03280ca69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8229
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
USBPHY_COMPBG needs to be configured by project
BUG=chrome-os-partner:30690
BRANCH=none
TEST=emerge-rambi coreboot without problem
checked the USBPHY_COMPBG is configured properly
CQ-DEPEND=CL:208557
Original-Change-Id: I8f2714644e1ef5d790d7ef1f574ebb998abbdac6
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/208731
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
(cherry picked from commit 1e9aeebb769e30940175cf3c38afe7ecfa69b5b4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I28aa445ccb4506db65784e30253dd16161b2bc75
Reviewed-on: http://review.coreboot.org/8217
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These boards don't have Super I/O's, rather they use Embedded
Controllers instead. No need to confuse with Super I/O related
stuff showing up in menuconfig.
Change-Id: I4922319daf7920bf5331b5bce05ded0d9a31a69b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7986
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
