According to the schematic, karis does not have a SAR sensor. Update
GPIO settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: Ib3b66b9594f2d0fddbbfc56e99f06b6587487f2a
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
The !CONFIG_SOC_AMD_COMMON_BLOCK_APOB_NV_DISABLE comment was likely a
copy-paste leftover, so remove it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I45b12d1dc5af84be99d54fea0c9ccf610cf5dae3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
This reverts commit 5013c60a87.
Reason for revert: consecutive reboots are causing kernel panic.
BUG=b:297153853
TEST=Able to perform 50 cycles of consecutive reboot after reverting
this CL and it boots to the OS every single time(w/o any kernel panic).
Change-Id: If6c96dcc62c706a522b98a1cf1dd1920ad6473a1
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77467
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds logic for logging the FW splash screen event to
the event log.
There could be three possible scenarios as below:
1. Platform w/o FW splash screen (i.e., either HAVE_FSP_LOGO_SUPPORT
or BMP_LOGO configs not enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) not
present in the event log.
39 | 2023-08-27 12:42:54-0700 | System boot | 12
40 | 2023-08-27 12:42:54-0700 | ACPI Wake | S5
41 | 2023-08-27 12:42:54-0700 | Wake Source | Power Button | 0
2. Platform w/ FW splash screen (i.e., both HAVE_FSP_LOGO_SUPPORT
and BMP_LOGO configs are enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
enabled in the event log.
34 | 2023-08-27 12:07:29-0700 | System boot | 11
35 | 2023-08-27 12:07:29-0700 | Firmware Splash Screen | Enabled
36 | 2023-08-27 12:07:31-0700 | ACPI Wake | S5
37 | 2023-08-27 12:07:31-0700 | Wake Source | Power Button | 0
3. Failed to render FW splash screen (due to any reason if FSP failed
to render the splash screen)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
disabled in the event log.
43 | 2023-08-27 13:06:10-0700 | System boot | 13
44 | 2023-08-27 13:06:10-0700 | Firmware Splash Screen | Disabled
45 | 2023-08-27 13:06:11-0700 | ACPI Wake | S5
46 | 2023-08-27 13:06:11-0700 | Wake Source | Power Button | 0
BUG=b:284799726
TEST=Verify that the event shows up in the event log when the user
selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display
the firmware splash screen.
Change-Id: Ie9e09acff5443c31b881c300134bc0bb06c490c6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch adds support for logging the firmware splash screen event
to the event log. There could be two possible scenarios for this
event: enabled and disabled.
BUG=b:284799726
TEST=Verify that the event shows up in the event log when the user
selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display
the firmware splash screen.
Change-Id: I1e224903df21159d6eef2849a7d6fb05de09f543
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch adds a new eventLog type ELOG_TYPE_FW_SPLASH_SCREEN to
support logging when we show firmware splash screen to the user.
BUG=b:284799726
TEST=Event shows in eventlog when user selects BMP_LOGO and
HAVE_FSP_LOGO_SUPPORT configs.
Change-Id: Id1572ecb83ca025ff65608e7ae4f3a065024f6d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77507
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A trivial follow-up on CB:67060. This makes contents of the file look a
bit less regular, but more like the rest Makefile.inc in the code base.
Change-Id: I772d37825e4b59cf927637dc39bfb3ee06115860
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77533
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change causes a freeze during boot on an RPL-UR that does not have
the memory part string in the CBI.
BUG=b:296353047
BRANCH=firmware-brya-14505.B
TEST='emerge-brya coreboot chromeos-bootimage', flash and boot
problematic DUT to kernel.
This reverts commit c51a7cdde4.
Change-Id: I99fe5111b5294673d9e0a5d13f9c240e0f4a92c3
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77516
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: <srinivas.kulkarni@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang does not recognize comments to indicate falltrough is intended
behavior.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Idcf7a24fc763b80863902702172b4ea950e132b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77431
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
x86 assembly code uses a lot of nested macros so increase the default
value from 20 to 1000.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic23c452514de7dc1aa420541b756c443180b8b37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77430
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the schematic, karis does not have a UWB, remove
related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I8a442518c2007cde883183871cef96db416850c0
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77437
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
The tool 'toada' which converts the Kconfig output to ada syntax keeps
running even when it can't parse something. Change that behavior to
halt, and update the error message to show where the error is coming
from.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I29807a054581060d04b9ecbe02f2ba666c46bcf2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Any builds using ADA were getting a message saying:
`couldn't parse value '-1' for 'SEABIOS_DEBUG_LEVEL'`
This change allows toada to parse negative integers.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6507c54976b67f1ad70846b6bd6c54c861130d3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77421
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
- Change all links to wikipedia to https.
- Update some links to wikipedia that were incomplete.
- Update a few links that are now broken.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If780e15997c499d1df975b436fd9af530f324eba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77488
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both mainboards have the same documentation. Instead of having two list
items referring to the same document, just merge the two items.
This fixes the following Sphinx warning:
WARNING: duplicated entry found in toctree: mainboard/lenovo/w530
Change-Id: I4140b34db01b1d5f47a39b9c1e33405e7789de63
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77503
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The document for northbridge/intel/i440bx doesn't exist and it didn't
exist at the time of introduction of these two mainboard documents. So
replace the reference with just the northbridge name.
This fixes the following Sphinx warning:
WARNING: unknown document: '../../northbridge/intel/i440bx/index'
Change-Id: Iaa67399f9d0e62d5d54ae08f5ebb8c70073c601f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Add new documentation generated by util/util_readme/util_readme.sh.
This also fixes the following Sphinx warning:
util/abuild/index.md: WARNING: document isn't included in any toctree
Change-Id: I26c33af3c5a5853f6bcce23e982a6b192b01f1d7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Sections may not start with transitions. Remove them.
This fixes the following Sphinx error:
ERROR: Document or section may not begin with a transition.
Change-Id: I519af83df14e44b0709dee7e338dba1ee6413f0a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77440
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clevo started using OZ711LV2 for the SD card reader around the time of
making its TGL boards. Without the driver, CPUs don't go to power states
lower than C2 due to LTR not being programmed. After enabling the driver
the CPU will go to C8 while the system is idle, giving significant power
savings if the system is left on battery power.
There is another issue with RPL where it only goes to C6 instead of C8.
This may be due to the intel_idle driver in Linux (as of 6.5-rc6
mainline and 6.4.6 stable) not supporting RPL C-states.
- tgl: Started being used with the Gazelle 3060 variant
- adl: Used on all models
- rpl: bonw15 does not have an SD card reader
Change-Id: I85c60feb6dcae7d877e70a6c6f2d3a7b3296fa0e
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The psp_transfer.h file was the same under all SoCs, and is really
tied to the file common/vboot/transfer.c, not the SOC.
This patch makes an include directory under vboot to put the header into
and sets it to be included for all SoCs using SOC_AMD_COMMON. This makes
the header file available to all platforms, so that new chips that don't
use the psp_verstage don't have to make a psp_transfer.h file just to
satisfy the compiler.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b9f2adee3a1d4d8d32813ec0a850344b7d717b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77303
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
License classifiers are much better about classifying files with SPDX
headers than they are at classifying the general text licenses due to
minor variations in the text. To help with classification, add the
SPDX headers to the files.
To see the current state of coreboot's licensing, see:
https://coreboot.org/fossology/
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If490f6705e7862d9ad02c925104113b355434101
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add new block for handling overclocking watchdog. The watchdog is
present since Skylake or maybe even earlier so it is safe to use with
most of the microarchitectures utilizing intelblocks.
The patch adds the common block for initializing and feeding the
watchdog. Timeout is defined statically in Kconfig and should be set
high enough by the board or SoC Kconfig to let the board boot with
full memory training and avoid reset loops. Full training of 128GB
DDR5 DIMM memory on AlderLake takes about 5 minutes. Newer SoCs
with newer memory technologies and higher RAM capacity may take more.
The default has been set to 10 minutes.
The patch also adds support for feeding watchdog in driverless mode,
i.e. it utilizies periodic SMI to reload the timeout value and restart
the watchdog timer. This is optional and selectable by Kconfig option
as well. If the option is not enabled, payload and/or software must
ensure to keep feeding the watchdog, otherwise the platform will
reset.
TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets
after some time. Enable the watchdog in driverless mode and see the
platform no longer resets and periodic SMI keeps feeding the watchdog.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib494aa0c7581351abca8b496fc5895b2c7cbc5bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68944
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add new memory part in the mem_parts_used.txt and generate the
SPD ID.
1. MICRON MT62F512M32D2DR-031 WT:B
BUG=b:291018417
TEST=emerge-rex coreboot
Change-Id: I6e05c0d41a4899ed64dbab7efd8904cd361cb50e
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77426
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to the schematic, karis does not have a WWAN module, remove
related settings.
BUG=b:294155897
TEST=emerge-rex coreboot
Change-Id: I653e3b4fae8a53018a6004528d1cfb3a6c883687
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77427
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: If093dc08c70c521cbef96ac5b5a7a46b37169bcd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This patch changes the SAR table selection logic to use FW_CONFIG which
will eventually help to support different WiFi SAR tables.
TEST=Able to build and boot google/rex.
Change-Id: I8f1244e3c3715bc3fbe6be1ade87817ff19836de
Signed-off-by: YH Lin <yueherngl@google.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77428
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These Kconfig options were being used basically as #define statements,
which is unnecessary. This isn't a good use of Kconfig options and would
be better just as #defines if actually needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
This patch moves the line adding hwlib to the include path to the inner
makefile so that it doesn't get added to every build, but only when
CONFIG_USE_SIEMENS_HWILIB=y
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id668b76366a554efff560cec746e637487ebdbf4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77417
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This keeps the vc/amd/pi & pi/00670F00 Makefiles from getting pulled
into the build when they aren't needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If600c78c2ba74dd03cf493586dae037b96b7d623
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
This change tells the build to only pull vc/eltan/security/Makefile.inc
into the overall build when USE_VENDORCODE_ELTAN is enabled in Kconfig.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1e462d8cc21c44716463c41cab598588cf4a22c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77418
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Disable SUSCLK for MT7922 based on FW_CONFIG to avoid power leakage.
BUG=b:296511904, b:294456574
BRANCH=firmware-nissa-15217.B
TEST=build and verified by EE
Change-Id: I9a6bf0ab7cc77f95e0d64f1380eac9e022fc08e4
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77383
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Scaleway Tagada was removed with commit c013fa6234 and Intel Galileo was
removed with commit 037c25d4dd. So remove their configs.
Change-Id: I1c491f437b8a1104bdf31a34e3c7d2c4e5794301
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77415
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tyler Wang