Set the base address and enable the GPIO and legacy GPIO controllers.
Call the mainboard routine to initialize the GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I06aed5903d6655d2a0948fb544cf9e0db68faa26
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14827
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add Kconfig to configure coreboot for a specific Galileo board.
Configure the GPIOs for the specific Galileo board.
TEST=Build and run on Galileo Gen2
Change-Id: I992460d506b5543915c27f6a531da4b1a53d6505
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14826
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
strlen(string) was on the "negative" side of the selection operator, the
side where string is NULL.
Change-Id: Ic421a5406ef788c504e30089daeba61a195457ae
Reported-by: Coverity Scan (CID 1355263)
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14867
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
The libpayload CBFS APIs are pretty old and clunky, primarily because of
the way the cbfs_media struct may or may not be passed in and may be
initialized inside the API calls in a way that cannot be passed back out
again. Due to this, the only real CBFS access function we have always
reads a whole file with all metadata, and everything else has to build
on top of that. This makes certain tasks like reading just a file
attribute very inefficient on non-memory-mapped platforms (because you
always have to map the whole file).
This patch isn't going to fix the world, but will allow a bit more
flexibility by bolting a new API on top which uses a struct cbfs_handle
to represent a found but not yet read file. A cbfs_handle contains a
copy of the cbfs_media needed to read the file, so it can be kept and
passed around to read individual parts of it after the initial lookup.
The existing (non-media) legacy API is retained for backwards
compatibility, as is cbfs_file_get_contents() (which is most likely what
more recent payloads would have used, and also a good convenience
wrapper for the most simple use case), but they are now implemented on
top of the new API.
TEST=Booted Oak, made sure that firmware screens and software sync
worked okay.
Change-Id: I269f3979e77ae691ee9d4e1ab564eff6d45b7cbe
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14810
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add register access routines for the GPIO and legacy GPIO controllers.
TEST=Build and run on Galileo Gen2
Change-Id: I0c023428f4784de9e025279480554b8ed134afca
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14825
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add LPC_DEV and LPC_FUNC symbols
TEST=Build and run on Galileo Gen2
Change-Id: I8485e2671af439f766228d4eaf9677c2ff8ff3f6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14880
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace # define with #define
Align the right hand column to prepare for further expansion
TEST=Build and run on Galileo Gen2
Change-Id: Ie4d9fb56d52d7291be5523d31c1d3aa51f94dcd6
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14879
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Simplify the union references to enable Coverity to properly process
the routine.
Found-by: Coverify CID 1349854
TEST=Build and run on Galileo Gen2
Change-Id: I667b9bc5fcde7f68cb9b4c8fa85601998e5c81ff
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14870
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Coverity does not like the use of for/break, switch to using returns
instead.
Found-by: Coverity CID 1349855
TEST=Build and run on Galileo Gen2
Change-Id: I4e5767b09faefa275dd32d3b76dda063f7c22f6f
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14869
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add Ioh.h from EDK-II to enable easy comparisons between EDK-II and
coreboot implementations.
TEST=Build and run on Galileo Gen2
Change-Id: I9320101a4a2c16ed18f682f3d04623c54afb52fd
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14824
Tested-by: build bot (Jenkins)
Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
Don't allow an array index of 2 to be processed by the code referencing
the array.
Found-by: Coverity CID 1353337
TEST=None
Change-Id: I586ca14416a6e40971f8f6f4066fbdb4908ca688
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14868
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Using a dedicated variable is slightly less readable and makes the code
less consistent, given that other test functions are called directly in
the if statements.
Change-Id: If52b2a4268acb1e2187574d15cc73a0c1d5fe9bb
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/14817
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add helper functions for generating some common objects:
acpigen_write_STA(status) will generate a status method that will
indicate the device status as provided:
Method (_STA) { Return (status) }
Full status byte configuration is possible and macros are provided for
the common status bytes used for generated code:
ACPI_STATUS_DEVICE_ALL_OFF = 0x0
ACPI_STATUS_DEVICE_ALL_ON = 0xF
acpigen_write_PRW() will generate a Power Resoruce for Wake that describes
the GPE that will wake a particular device:
Name (_PRW, Package (2) { wake, level }
Change-Id: I10277f0f3820d272d3975abf34b9a8de577782e5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14795
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to produce smaller AML and not rely on the caller to size the
output type appropriately add a helper function that will output an
appropriately sized integer.
To complete this also add helper functions for outputting the single
OpCode for Zero and One and Ones.
And finally add "name" variants of the helpers that will output a
complete sequence like "Name (_UID, Zero)".
Change-Id: I7ee4bc0a6347d15b8d49df357845a8bc2e517407
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add helper function to emit a string into the SSDT AML bytestream with a
NULL terminator. Also add a helper function to emit the string OpCode
followed by the string itself.
acpigen_emit_string(string) /* Raw string output */
acpigen_write_string(string) /* OpCode followed by raw string */
Change-Id: I4a3a8728066e0c41d7ad6429fad983e6ae6962fe
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14793
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Add helpers for writing word and dword values in acpigen and use them
throughout the file to clean things up:
acpigen_emit_word - write raw word
acpigen_emit_dword - write raw dword
acpigen_write_word - write word opcode and value
Change-Id: Ia758d4dd25d0ae5b31be7d51b33866dddd96a473
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14792
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add support for a basic generic device in the devicetree to bind to a
device that does not have a specific bus, but may need to be described
in tables for the operating system. For instance some chips may have
various GPIO connections that need described but do not fall under any
other device.
In order to support this export the basic 'scan_static_bus()' that can
be used in a device_operations->scan_bus() method to scan for the generic
devices.
It has been possible to get a semi-generic device by using a fake PNP
device, but that isn't really appropriate for many devices.
Also Re-generate the shipped files for sconfig. Use flex 2.6.0 to avoid
everything being rewritten. Clean up the local paths that leak into the
generated configs.
Change-Id: If45a5b18825bdb2cf1e4ba4297ee426cbd1678e3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14789
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Use the second token for an i2c device entry in devicetree.cb to
indicate if it should use 10-bit addressing or 7-bit. The default if
not provided is to use 7-bit addressing, but it can be changed to
10-bit addressing with the ".1" suffix. For example:
chip drivers/i2c/generic
device i2c 3a.1 on end
end
Change-Id: I1d81a7e154fbc040def4d99ad07966fac242a472
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14788
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Currently you cannot assign a string to a register in devicetree because
the quotes are removed when parsing and the literal is assigned directly.
Add a parse option for two double-quotation marks to indicate a string
and return a quoted literal that can be assigned to a register with a
'const char *' type.
Example:
chip drivers/i2c/generic
register "hid" = ""INT343B""
register "uid" = "1"
device i2c 15 on end
end
Change-Id: I621cde1f7547494a8035fbbab771f29522da1687
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/14787
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Long options can be useful when writing examples and documentation
as they are more expressive and obvious to the reader.
Change-Id: I39496765ba1f15ccc2ffe1ad730f0f95702f82b8
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: https://review.coreboot.org/14736
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Instead of having the mainboards duplicate logic surrounding
LPDDR4 initialization provide helpers to do the heavy lifting.
It also handles the quirks of the FSP configuration which allows
the mainboard porting to focus on the schematic/design.
Change-Id: I686eb3097c33399a3b94af89237f7fe1b2d34c2f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14790
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
PCI device ID of this mini-PCI-e WLAN card is 8086:088e.
With this card inserted on pcengines/apu1 mini-PCI-e slot J17,
system halts late in ramstage, in agesawrapper AMD_INIT_MID.
Offending operation is enabling PCIe ASPM L0s and L1 for the card.
That is, writing PCIe capability block Link Control [1:0] = 11b
in the card's configuration space. AGESA already has a blacklist
for the purpose of masking such unstable ASPM implementations.
Change-Id: I9623699c4ee68e5cdc244b87faf92303b01c4823
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/8496
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If the option is not provided, ssh uses the default port for the host,
which is usually 22, but may be overridden in the user's SSH
configuration.
Change-Id: I303e9aeae16bd73a96c5e6d54f8e39482613db28
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14522
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In some configurations, "git push <remote>" (without a branch name)
refuses to do anything.
Change-Id: I23a401b39dd851e9723676586c7f29afa111b49d
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14539
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
In order for apollolake mainboards to utilize the common GPIO API
it actually needs to be implemented.
Change-Id: I41de8d5d9f3c39e7e796eae73b01cb29e9c01347
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14797
Tested-by: build bot (Jenkins)
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
In order to allow using the same C source to be compiled
for multiple stages (with #if/#endif guards) one needs the
necessary function delcarations. Therefore, remove the
guards.
Change-Id: Iea94d456451c5d3db8b8b339e81163b3b3fed3ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14796
Reviewed-by: Duncan Laurie <dlaurie@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
- manpage
- usage message
- new warning message if -S is used on an unsupported chipset
Change-Id: I1acaa5f4232b65244ec00fd22ec7460d9cc387f1
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-on: https://review.coreboot.org/14624
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Not used as we link AGESA into same romstage and ramstage ELF.
Change-Id: Ia427b9c0cc88b870de75df14bba4ca337a28adff
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/14395
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The ACPI BAR (BAR2 - offset 0x20) is not PCI compliant. That means
that probing may not work. In that case, a resource still needs to be
created for the BAR.
BONUS: We now avoid the need to declare the MMIO resources as fixed.
Change-Id: I52fd2d2718ac8013067aaa450c5eb31e00738ab9
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14634
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP does not itself write the LB_FRAMEBUFFER entry, so that needs to
be done in platform code.
Change-Id: Ia8311da9b9a603ea9b333ea873fc26d11e182332
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14764
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The old code only checked for an RW_MRC_CACHE region when
CONFIG_CHROMEOS was selected. This assumption is not necessarily true,
as one can have FMAP without a CHROMEOS build. As a result, always
search FMAP first before falling back on CBFS for locating the MRC
cache region.
The old logic where CHROMEOS builds would fail when RW_MRC_CACHE was
not found is preserved, such that behavior does not change.
Change-Id: I3596ef3235eff661af055968ea641f3e9671cdcd
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14757
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
When SOC_UART_DEBUG was not set, the boot would hang somwhere in
ramstage, as evidenced by POST codes reported from the EC. This was
traced to the .set_resources and .enable_resources members of the UART
PCI driver being set to NOOP.
Although the exact mechanism of failure is not known, this change
eliminates the hang.
Change-Id: Ic2f3d56a964ec890ebfa1e1a7770f1ae2eb22281
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/14771
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add support for Elan touchscreen on I2C3 for amenia
BUG=None
TEST=Boot to Chromium OS and verify if touchscreen is working.
Change-Id: Ic75bef0e5878bd5b8c0d727400679663d9f591e3
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/14768
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to provide other stages access to the ioport range
required by the ChromeEC provide google_chromeec_ioport_range()
function to fill in the details. Currently, the ioport range is
only consumed by the LPC implemenation. Also allow ec_lpc.c to be built
for the bootblock stage.
Change-Id: I6c181b42e80e71fe07e8fa90df783107287f16ad
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14769
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
The FLASHMAP_OFFSET config variable is used in lib/fmap.c, however
the fmdtool creates a fmap_config.h with a FMAP_OFFSET #define.
Those 2 values are not consistent. Therefore, remove the Kconfig
variable and defer to the #define generated by fmdtool.
Change-Id: Ib4ecbc429e142b3e250106eea59fea1caa222917
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14765
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Remove the phrase "which accompanies this distribution" from the license.
Re-format the license to fit in 80 columns.
TEST=Build and run on Galileo Gen2
Change-Id: I8d893cf1270b95b27eab7142b276ebfce24ec2ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/14774
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
FSP 2.0 uses the same relocate logic as FSP 1.1. Thus, rename
fsp1_1_relocate to more generic fsp_component_relocate that can be
used by cbfstool to relocate either FSP 1.1 or FSP 2.0
components. Allow FSP1.1 driver to still call fsp1_1_relocate which
acts as a wrapper for fsp_component_relocate.
Change-Id: I14a6efde4d86a340663422aff5ee82175362d1b0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Currently, convert_fsp assumes that the component is always XIP. This
is no longer true with FSP 2.0 and Apollolake platform. Thus, add the
option -y|--xip for FSP which will allow the caller to mention whether
the FSP component being added is XIP or not. Add this option to
Makefiles of current FSP drivers (fsp1_0 and fsp1_1).
Change-Id: I1e41d0902bb32afaf116bb457dd9265a5bcd8779
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14748
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Lee Leahy