The simple PCI config accessors are always available
under names pci_s_[read|write]_configX.
Change-Id: Ic1b67695b7f72e4f1fa29e2d56698276b15024e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The typical do { } while (0) did not work, so
provide empty stub function instead.
Change-Id: Ieb0c33b082b4c4453d29d917f46561c0e672d09a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Enable VBOOT in Kconfig and provide a flashmap that includes all the
needed sections for VBOOT support.
Change-Id: Iee12a5d1781c869b20bc14a52ecbf23474caa3fd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
If VBOOT is used on a mainboard based on fsp_broadwell_de then VBOOT
needs to be able to write to its NV data which may be stored on the SPI
flash. Enable write access to the SPI flash on SoC level. If the
mainboard does not use VBOOT the linker will drop the extra code. The
benefit is that this code is at least compiled and therefore build
tested with fsp_broadwell_de.
Change-Id: I90a2d30f5749c75df2b286dce6779f10dde62632
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Internal pull up need to be enabled for GPD3 as power button pin for
PCH according cometlake pch EDS vol1 section 17-1. Without that pin will
stay floating and hook up XDP can cause system shutdown as power buttone
event will trigger.
BUG=N/A
TEST=Hook up XDP on drallion platform, able to boot up into OS and stay
at power up state.
Change-Id: Idd1befeb14a251b7c0542ca1f99049d07b28fb98
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Source files including this may have locally defined
__SIMPLE_DEVICE__ so this cannot be placed in <rules.h>.
Change-Id: I2336111b871203f1628c3c47027d4052c37899dc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35653
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Source files including this may have locally defined
__SIMPLE_DEVICE__ so this cannot be placed in <rules.h>.
Change-Id: If700dd10fd5e082568cd6866bfd802fc2e021806
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35652
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is safe to assume this to be copy-paste from eg. i945
where registers of said PCI device were read.
Change-Id: I387b7fd6caf317543a6438f973d9e1d96e418de3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35668
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The filename chip.h has a special purpose with the generation
of static devicetree, where the configuration structure name matches
the path to the chip.h file. For example, soc/intel/skylake/chip.h
defines struct soc_intel_skylake_config.
The renamed file did not follow this convention and the structure it
defines would conflict with one defined soc/intel/common/chip.h if such
is ever added.
Change-Id: Id3d56bf092c6111d2293136865b053b095e92d6b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
We need the stub header file. If PCI was implemented, assume
generic MMIO mapped configuration space would work here.
Change-Id: Ia731e5c5a6725fe22ab8b0398cafa1127ed90891
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Based on the SCH5627 datasheet which is similiar
SCH5545 id 0xc4, SCH5627 id 0xc6.
Change-Id: I81f3f68690d2000a4fa8a1e703c01f54ebbce953
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20237
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CONFIG_CBFS_SIZE should only be used as a parameter to generate the
default FMAP.
This also swaps around FMDFILE and CBFS_SIZE to avoid that the
CBFS_SIZE entry disappears when filling in the FMDFILE entry below it.
One advantage is that if code references CONFIG_CBFS_SIZE the jenkins
buildtest will most likely fail as many boards provide an FMD file.
Change-Id: Ic7926e1638d7fb49ba61af28d682315786c3c39e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Per google/stout.
Tested with SanDisk SSD U110.
Change-Id: I7cc9837f572236acac2007e95990e64c25a5d6e2
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Based on schematic and register dumps.
Change-Id: I91fc47022988cfe986fb8c1ed21dc073ee7d16bc
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
CB:35377 changed the behavior of find_fmap_directory() to return
pointer to CBMEM_ID_FMAP if fmap is cached in
cbmem. lb_boot_media_params() calls find_fmap_directory to add offset
of fmap in flash to coreboot table. However, because of the change in
behavior of find_fmap_directory(), it ended up adding 0 as the offset.
This change adds a new function get_fmap_flash_offset() which returns
the offset of fmap in flash. Ideally, all payloads should move to
using the FMAP from CBMEM. However, in order to maintain compatibility
with payloads which are not updated, ensure that fmap_offset is
updated correctly.
Since find_fmap_directory() is no longer used outside fmap.c, this
change also removes it from fmap.h and limits scope to fmap.c.
In a follow up patch, we need to push a change to libpayload to expose
the fmap cache pointer to lib_sysinfo.
BUG=b:141723751
Change-Id: I7ff6e8199143d1a992a83d7de1e3b44813b733f4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Shelley Chen <shchen@google.com>
dev_find_slot() can sometimes fail to return the desired device object
prior to full PCI enumeration. Comment the declaration and
implementation accordingly to help the user understand the problem and
avoid its usage.
Change-Id: I3fe1f24ff015d3e4f272323947f057e4c910186c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35632
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The vendor id option set here is useless as most SSVID registers get
filled with 0x8086 (their VID) by default, anyway.
Besides that the Kconfig option isn't meant for retrofit ports, cf.
commit 7e1c83e31b (Add Kconfig options to override Subsystem Vendor and
Device ID). The right place would be the devicetree.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: If67c679bb342f63096902535734106e4f1651118
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
coreboot toplevel makefile breaks when path to the coreboot directory
contains spaces.
This patch displays a reasonable message to the user whenever spaces
are found within the path to the coreboot direcrory.
This commit addresses coreboot ticket #179.
Change-Id: Id11deffa01ddca1ff9332d67c7aa33a382b4cdc7
Signed-off-by: Sourabh Kashyap <sourabhka@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35434
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All solid state devices have vendor id defined by JEDEC specification JEP106,
which originally allocated only 7 bits for it plus parity. When number of
vendors exploded beyond 126, a banking proposition came maintaining
compatibility with older vendors while allowing for 4 extra bits (16 banks)
through the introduction of the concept "Continuation code", denoted by the
byte value of 0x7f.
Examples:
0xfe, 0x60, 0x18, 0x00, 0x00 => vendor 0xfe of bank o
0x7f, 0x7f, 0xfe, 0x60, 0x18 => vendor 0xfe of bank 2
BUG=b:141535133
TEST=Build and boot grunt.
Change-Id: I16c5df70b8ba65017d1a45c79e90a76d1f78550c
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Most of the X11 boards with socket LGA1151 are basically the same boards
with just some minor differences like different NICs (1 GbE, 10 GbE),
number of NICs / PCIe ports etc.
There are about 20 boards that can be added, if there is a community for
testing.
To be able to add more x11 boards easily like x11ssm (see CB:35427) this
restructures the x11ssh tree to represent a "X11 LGA1151 series". There
were multiple suggestions for the structure like grouping by series
(x10, x11, x...), grouping by chipset or by cpu family.
It turned out that there are some "X11 series" boards that are
completely different. Grouping by chipset or cpu family suffers from the
same problem. This is why finally we agreed on grouping by series and
socket ("X11 LGA1151 series").
The structure uses the common baseboard scheme, while there is no "real"
baseboard we know of. By checking images, comparing logs etc. we came to
the conclusion that Supermicro does have some base layout which is only
modified a bit for the different boards.
X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we
expect the other boards to have mostly the same device tree, there is a
common devicetree that gets overridden by each variant's overridetree.
Besides that some very minor modifications happened (formatting, fixing
comments, ...) but not much.
Documentation is reworked in CB:35547
Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Modify IRQ pin from D21 to A21 and support wake-up from touchpad
BUG=b:141519690
TEST=build bios and verify elan touchpad works fine
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I6cc5b780ffcee24f1f2a04e88c30628ceb5904e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35551
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
new DDR particle:
1. Samung K4A8G165WC-BCWE
2. Hynix H5AN8G6NCJR-XNC
BUG=b:139085024
BRANCH=master
TEST=rework new source to DUT and re-flash bios to DUT and
verify DUT will bring up successfully
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: I0d039af53938086733308a081a77a7398e7bf5d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It is only called in ramstage. Even if it was called in
romstage, execution flow is such that BSP and AP CPUs
should not be able to enter update_microcode() routine
concurrently.
Also the Kconfig guarding the spin_lock() calls are not
selected nor are the lock variables declared for these
platforms.
Change-Id: I1c2e106f10e8420e942b3ed082c677c0db95557c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35586
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The script had a couple of bugs:
* It didn't create the required directory under variants/
* It was treating the wildcard as literal and so couldn't
find variant files to copy.
V.2: Drop verbose cp && fixup wild card usage.
Change-Id: Ie6f4179014b79ea45d0fcf406ca192046438dbf7
Signed-off-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Andrew McRae <amcrae@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
CB:29633 switched platform to use sb/common spi implementation,
which worked until CAR_GLOBAL was removed in CB:30506.
Revert the changes back to usage of CAR_GLOBAL in the common spi
driver so that flashconsole will work again in romsatge for
fsp_broadwell_de.
Test: verify flashconsole functional on out-of-tree Broadwell-DE board
Change-Id: I72e5db1583199b5ca4b6ec54661282544d326f0f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Add the configuration 'Juniper' for the new mainboard.
BUG=b:137517228
TEST=make menuconfig; select 'juniper' and build
Change-Id: I94e3ac7f6de3fecf177e344cb217eaecf6362d69
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Now that SOC_INTEL_COMETLAKE is selected by default in Kconfig,
utility to create a new variant does not need to do that anymore in
Kconfig.name
Change-Id: If68bcf14e2e0812d4f4dcb99371c65790154ff62
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Andrew McRae <amcrae@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
All variants of hatch are using Comet Lake and so the selection can be
done in Kconfig without requiring each variant to do the same.
Change-Id: Ief34296334ede5ba0f5f13381e92427ccc440707
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Andrew McRae <amcrae@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Eltan is missing in the vendor index.
Documentation of the eltan vendorcode is availlabe already.
Add eltan to vendor index.
BUG=N/A
TEST=N/A
Change-Id: I51fe64da91499f0ea7bf97fc240f4e263470c146
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Sort the names of all variant mainboards in an ascending order.
Change-Id: I19d502298744c0e0cbc91eb836c62ca90cdb9a5c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Enable VBOOT in Kconfig and provide a flashmap that includes all the
needed sections for VBOOT support.
Change-Id: I3d58094256d2730dbd249291a8f1ed8df9dfe62d
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Kyösti Mälkki