Processor attached memory should not use reserved_ram_from_to and
treat the calculation of gi_mem_size size as 64MB.
By default SOC_INTEL_HAS_CXL is enabled for Sapphire Rapids platforms,
this should fix small total memory issue. Before the fix running
command 'free -g -h' under Linux shows the total memory is only 1.4Gi,
after the fix it's showing the expected total memory size 15Gi.
Tested=On AC without attaching CXL memory, the total memory size is
the same as de-selecting SOC_INTEL_HAS_CXL.
On OCP Crater Lake with CXL memory attached, CXL memory can be recognized
in NUMA node 1:
numactl -H
available: 2 nodes (0-1)
node 0 cpus: 0 1 2 3 4 5 6 .. 59
node 0 size: 95854 MB
node 0 free: 93860 MB
node 1 cpus:
node 1 size: 63488 MB
node 1 free: 63488 MB
node distances:
node 0 1
0: 10 14
1: 14 10
Change-Id: I38e9d138fd284620ac616a65f444e943f1774869
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74296
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Yavilla is a variant of yaviks which is almost identical
to yaviks, so is reusing the yaviks coreboot variant.
so update the GPIO tables to handle these based on fw_config.
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I831b199055c931e7a4a393eeb9e75e83c8ae3c3a
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74264
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Yavilla will leverage yaviks FW build.
It has one additional USB Type-A0 port, support stylus and support WWAN.
Here update devicetree based on FW_CONFIG for yavilla's design.
-Enable USB2 port3 and USB3 port1 for USB2/3 Type-A0
-Enable USB2 port5 and USB3 port3 for WWAN
-Enable pen garage
-Enable rear mipi cam
-Enable Synaptics touchpad
BUG=b:277148122, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I38dbcf5920d12adb1f84885bdfa4c2f2faf2eb9e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Use the common acpi_fill_root_complex_tom function instead of the SoC-
level northbridge_fill_ssdt_generator function that does basically the
same.
TEST=Resulting coreboot SSDT remains unchanged on Careena.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie0f100e0766ce0f826daceba7dbec1fb88492938
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
The USB port configuration was derived from the PPR and schematics.
Primary functions are:
2 USB-C ports
1 USB SS+ type A port
2 Cameras (World/User facing)
1 Bluetooth transceiver
1 WWAN
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Iecb256cad7b2daea1fddfc8323e88ff5c38d1e51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable the XHCI controllers in the devicetree for myst project.
BUG=b:275905635
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I05dc5bb157f0ef955e4b37e34d7b32678e42ebc8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
In CB:41119, I sort of made up a mechanism on the fly for how to make
the machine-parseable cbfstool print output extensible without breaking
backwards compatibility for older scripts. But I only explained it in
the commit message which is not very visible. This patch adds a comment
to the function that generates that output so that people who want to
change it can understand the intent.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0d18d59e7fe407eb34710d6a583cfae667723eb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
DDI 2..4 are the display outputs multiplexed onto the 3 USB type C ports
as DisplayPort alternate function, so use the DDI_DP_W_TYPEC connector
type for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I659d62bfb426e3e47214203490c34e9c200beee2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74299
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the blob type for TypeId0x25_Mp2Fw_MDN_AD03.sbin to
subprogram 0. Delete the extra MP2FW line.
BUG=b:246770914
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I5418b1ed59e1916b971d2eece9f6a2fd0e51b1b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This reverts commit 655f7362e1.
Reason for revert: Apparently, the change was not properly reviewed. It
not only contains conflicting name and description of the D3COLD
Kconfig, but also creates a conflict between existing devicetree and
Kconfig options for D3Cold/S3/S0ix.
Change-Id: I56ce8f59f8548fc58bc2b3b07c1314e2eed7061c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
The Kconfig is only used in common code to gather the build time
maximum socket number FSP support. The same information is available
in FSP header as MAX_SOCKET, thus use the FSP as truth of source.
Currently MAX_SOCKET is 4.
Change-Id: I10282c79dbf5d612c37b7e45b900af105bb83c36
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74339
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Enable iommu in devicetree for myst in order to allow kernel to load and
initialize IOMMU.
Bug=b:276805280
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I94e93afe775b070253464a9d187ad6c028d1b811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74177
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Enable the console UART for myst devices.
Bug=b:275900837
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I52c1b86c46907216d88f98917968b833af0d5d41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74103
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
These new memory are added for yavilla.
DRAM Part Name ID to assigna
H58G66BK7BX067 4 (0100)
MT62F2G32D4DS-026 WT:B 4 (0100)
K3KL9L90CM-MGCT 4 (0100)
H58G66AK6BX070 5 (0101)
BUG=b:277148122
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I3c48b9763f54e2e69f7c2d494fefbabedab2a389
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This reverts commit 4dba71fd25.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
No need for variant to use _weak.
BUG=b:276818954
TEST=new_variant_fulltest.sh rex0
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I7ad904e06e5d83edf4bc11cafd5060ca409bd4ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74294
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch configures external V1p05/Vnn/VnnSx rails for Uldren
to follow best practices for power savings – untested though.
* Enable the external V1p05, Vnn, VnnSx rails in S0i1, S0i2, S0i3, S3,
S4, S5 , S0 states.
* Set the supported voltage states.
* Set the voltage for v1p05 and vnn.
* Set the ICC max for v1p05 and vnn.
BUG=b:272829190
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I3ff8e7db33bfbe4048327825406462262e8d2919
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74335
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With EC's lid switch implementation, there is no need to maintain the
lid switch state in mainboard. Hence remove LIDS ACPI object from
mainboard.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Read the lid switch state
correctly through /proc/acpi/button/lid/LID0/state.
Change-Id: I0f8dc7216337268c421a475f54ee5b28abf33d08
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74333
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
With CB:16732, EC can provide default lid switch implementation(LID0
ACPI device). Up until that point, mainboard has been providing default
switch implementation. When EC provides lid switch implementation, the
lid switch state is read from EC either through MMAP or LPC interface.
Hence there is no need to keep mainboard's LIDS ACPI object in sync with
EC's lid switch state. Use only EC's lid switch state on boards using
EC's implementation. This paves the way to remove LIDS ACPI object on
those mainboards.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Trigger lid open/close
events and ensure that they are detected properly through
/proc/acpi/button/lid/LID0/state.
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: open
localhost ~ # cat /proc/acpi/button/lid/LID0/state
state: closed
Ensure that the system behaves as expected based on powerd
configuration. After signin, system suspends/resumes for lid close/open.
On signin screen, system shuts down/boots for lid close/open.
Change-Id: I013574d7c21761f167ad38aeed27a419677b8000
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Intel Archer City CRB is a dual socket CRB with Intel Sapphire Rapids
Scalable Processor chipset. The chipset also includes Emmitsburg PCH.
It was tested with LinuxBoot payload on both dual and single socket
configurations.
The multisocket support depends on Change-Id:
I4a593252bb7f68494f4ccce215ac9cf1eb19b190
Change-Id: Ic02634cd615e2245e394f10aad24b0430cf5cd17
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71968
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Set the P2SB device as hidden as FSP-S is hiding the PCI configuration
space from coreboot on Alder Lake systems.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5cfde7c1f6791578a03d73e89bcde31af608f12d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
P2SB device is being hidden from coreboot by FSP-S. This breaks the
resource allocator which does not report P2SB BAR via intel common
block P2SB driver. Hook up the common block P2SB driver ops to
soc_enable function so that the resources will be reported. The P2SB
device must be set as hidden in the devicetree.
This fixes the silent resource allocation conflicts on machines with
devices having big BARs which accidentally overlapped P2SB BAR.
TEST=Boot MSI PRO Z690-A with multiple PCIe devices/dGPUs with big
BARs and see resource conflicts no longer occur.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7c59441268676a8aab075abbc036e651b9426057
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add DTT thermal settings for thermal control provided by
thermal team for rex0 board
BRANCH=None
BUG=b:262498724, b:270664854
TEST=Built and verified thermal entries in ACPI SSDT on Rex board
Change-Id: I00dd97b759c8c68edaeeb4d64422b83c5e86981d
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Printing the value of a variable is not informative for a normal user,
so decrease the value from BIOS_INFO to BIOS_DEBUG.
Fixes: b9caac74a3 ("soc/amd/mendocino: Reinterpret smu_power_and_thm_limit")
Change-Id: I22f6293fd47633dfdbdae37b7257f47a5a4bb29c
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Fix a couple of bugs in the _OSC method for handling
"PCI Host Bridge Device" on Xeon-SP.
- Drop the Sleep. The code doesn't write to hardware at all, so
there's no need to sleep here.
- Make sure that the number of DWORD passed in Arg2 is at least 3.
The existing check was useless as it would not create the
DWordField, but then use it anyways.
- Add check for CXL 2 device method calls which provide a 5 DWORD
long buffer to prevent buffer overflows when invoking the
"PCI Host Bridge Device" method.
Test:
Boot on Archer City and confirm that no ACPI errors are reported
for _OSC.
Change-Id: Ide598e386c30ced24e4f96c37f2b4a609ac33441
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
According to ADL PCH BIOS specification (DOC# 630603) ADL-S PCH
uses a fixed SBREG_BAR of 256MiB starting at 0xe0000000.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ied59a6dad8fb065dc3aeb6281bd32074aaa5e3b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
With the latest hardware revision, the two GPIOs GPD11 and GPP_C8 are no
longer used.
BUG=none
TEST=Checked output verbose GPIO debug messages
Change-Id: Ia06f93aee4eccb0e4230f0c3ef53922d42701f21
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74201
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Ioapic information in the devicetree was only used to set up mptables
but this generic driver was removed (ca5a793 drivers/generic/ioapic:
Drop poor implementation).
This removes the unused remainders from mainboard devicetrees.
Remove ioapic setup from sconfig.
Change-Id: Ib3fef0bf923ab3f02f3aeed2e55cf662a3dc3a1b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Now the CPU topology is filled in struct device during mp_init.
Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
From request, all type C port limit to to Gen1 5GHz.
So enable UPD usb3_port_force_gen1 for Markarth.
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify the setting will be applied on Markarth.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I9314b67a82ad2993c87f0110db5ec927caaa772b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74087
Reviewed-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Add GPU power sequencing changes for the Hades baseboard and variant.
Some signals were added, moved or inverted.
Based on implementation from Agah.
Moved signals:
GPIO_1V8_PWR_EN GPP_E11
GPIO_NV33_PWR_EN GPP_E2
GPIO_NV33_PG GPP_E1
New signals:
GPIO_NV12_PWR_EN GPP_D0
GPIO_NV12_PG GPP_D1
Inverted signals:
GPIO_FBVDD_PWR_EN GPP_A19
ifdef's will be dropped once the Agah variant is retired.
BUG=b:269371363
TEST=builds and verified on Agah that DGPU is still detectable (lspci)
Change-Id: I0b8efe7a34102cf61d4f784103c4a4f9337213f7
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73896
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
mainboard_vbt_filename() used to assume that it is called after a call
to get_blc_pwm_freq_value() with a valid parameter, but currently it
is the first call of get_blc_pwm_freq_value(NULL), and will return 0,
so "data_led.vbt" is always returned, regardless of the actual type of
the panel.
Combined with the previous commit, in this commit
mainboard_vbt_filename() will explicitly read EDID string via
gm45_get_lvds_edid_str() and use this string to call
get_blc_pwm_freq_value().
Resolves: https://ticket.coreboot.org/issues/475
Tested on my x200s with LTD121EQ3B (LED), and x200 with LTD121EWVB
(CCFL).
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I2e080b29321b6989d1f26b6c67876b3d703042f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74181
Reviewed-by: Swift Geek (Sebastian Grzywna) <swiftgeek@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Johnny Lin