With LATE_CBMEM_INIT, do not search for the initial collection from
CBMEM in ramstage. On S3 resume this would find the non-empty
collection from previous run of ramstage. Start with an empty table
instead.
Remove a spurious error message as the stamps get stashed and
will be copied to CBMEM later.
Change-Id: Ib94049531c0ac23af25407bd2ca7644ee0163d69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implementation for cbmem_find() did not work for boards without
EARLY_CBMEM_INIT in romstage.
This is required for S3 resume to work on AGESA plaforms.
First broken with commit 0dff57d
cbmem: switch over to imd-based cbmem
Change-Id: I9c1a4f6839f5d90f825787baad2a3824a04b5bdc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10299
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
For x86 systems employing CONFIG_LATE_CBMEM_INIT, set_top_of_ram() is
called in ramstage to note the upper address of the 32-bit address
space. This in turn is consumed by cbmem. However, in this scenario
cbmem_top() cannot always be relied upon because get_top_of_ram()
doesn't return the same value provided to set_top_of_ram().
To fix the inconsistency in ramstage save the value passed in
to set_top_of_ram() and defer to it as the return value for
cbmem_top().
Change-Id: Ida796fb836c59b9776019e7f8b3f2cd71156f0e5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10313
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The __console attribute as well as linker binding
was dropped at some point. Kill of the dead code and
infrastructure.
Change-Id: I15e1fb4468fffe2e148ec9ac8539dfd958551807
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10279
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Old file defines wrong PCI devices (1.2 2.2 3.2 4.2 5.2).
Wrong defines cause PCI devices not to be found in the pirq_data table.
Example error output:
PCI IRQ: Found device 0:02.01 using PIN A
PCI Devfn (0x11) not found in pirq_data table
PCI IRQ: Found device 0:02.02 using PIN B
Found this device in pirq_data table entry 3
Orig INT_PIN : 2 (PIN B)
PCI_INTR idx : 0x02 (INTC# )
INT_LINE : 0xA (IRQ 10)
PCI IRQ: Found device 0:02.03 using PIN C
PCI Devfn (0x13) not found in pirq_data table
PCI IRQ: Found device 0:02.04 using PIN D
PCI Devfn (0x14) not found in pirq_data table
PCI IRQ: Found device 0:02.05 using PIN A
PCI Devfn (0x15) not found in pirq_data table
Patch fixes, that pirq_data entries for pci devices 2.1 - 2.5 get found.
Change-Id: I4503433427f4ec90d022b65084c52077ba4f3511
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: http://review.coreboot.org/10289
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
This should be overriden by mobo even if it's no-op override.
weak function in this case would only hide real problems.
Change-Id: I30dd671eb605b490a51153d00ae308c4bdef3d05
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7368
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Export SLIC table from file in CBFS.
Change-Id: Id0e7fe0a49b9cd50b5e43cd15030e1c2098728ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7202
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The comment about necessity of include isn't true anymore as get_cst_entries
is not weak anymore so if it's not found, the linking would fail.
Change-Id: I4bf88208d63ac3e625f464c3907e2e1ea575dd9f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7375
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This code in reality just describes the southbridge features, don't put a copy
in every mainboard.
Change-Id: I8cf3019a36b1ae6a17d502e7508f36ea9fa62830
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10231
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
We updated the source files, but not the precompiled results.
Change-Id: I49634409d01c8d7cf841944e01d36571ae66c0ac
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10296
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
No need to execute the compiler to figure this out once for each
source file (or so).
Change-Id: I56bf084f1217b96748296931617e9233f21183d5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10294
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Because new images place the bootblock in a separate region from the
primary CBFS, performing an update-fit operation requires reading an
additional section and choosing a different destination for the write
based on the image type. Since other actions are not affected by these
requirements, the logic for the optional read and all writing is
implemented in the cbfs_update_fit() function itself, rather than
relying on the main() function for writing as the other actions do.
Change-Id: I2024c59715120ecc3b9b158e007ebce75acff023
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10137
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Make it so that git does not remove old copies or the symlink.
Change-Id: I27be60c897d2f86cdf274480c83cbbfe38fcdf94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10292
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Useful for autoport and other gfx-related developpement.
Change-Id: I1fc0952bc30ab15cd39a4f0c00649714dcf318f3
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10276
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
It shouldn't be necessary because tools should give their own rules.
Change-Id: I8654afaf4f64a14a73677d9901562f7d962f0404
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10290
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Some missing static declarations and whitespace on the console.
Change-Id: I1af59dbfb1396297bd671b43d9326dffdd7f59d4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10284
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Same comments were already removed for the latest board, the amd/lamar.
Change-Id: Ie244f838409c567c11f7444c9cf17de72e49dbb0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10283
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Implementation corrupts low-memory on S3 resume path, rendering
OS unstable. AMD was never able to pinpoint a revision that did
not have the issue.
Change-Id: I9656ac1bfe1412775a6152b9f995c4d4ebf57159
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10285
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: build bot (Jenkins)
Update the FSP driver files from 1.0 to 1.1.
Updates will occur manually to these files only for FSP 1.1 support. An
fsp_x_y should be added in the future to support newer versions of the
FSP specification.
Please note that due to the interface with EDK2, these files make
references to data structures and fields that use CamelCase.
BRANCH=none
BUG=None
TEST=Build for Braswell or Skylake boards using FSP 1.1.
Change-Id: I2914c047d786a3060075356783ac9758bc41f633
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10049
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Since nobody else stepped up, I hereby claim responsibility for the
build system.
Change-Id: I580b906d15fc2f049f0072e7b4608b1f19db83ab
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10277
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It's used only in P470 and lynxpoint machines. Remove it from other
southbridges. New machines should use src/drivers/pc80/tpm.
Change-Id: I4741e76df4c6204d65562f016abac9ed60558432
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10268
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Currently, when the remote master branch of the board-status
repository changes between cloning and pushing, `git push origin`
fails.
This race condition happens quite often with REACTS testing commits at
the same time on different systems.
If that happens, just download the objects and refs from the
board-status repository and rebase the local changes on it. Try that
three times before exiting with an error message.
Change-Id: I628ebce54895f44be6232b622d56acbcc421b847
Helped-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Helped-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10262
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
acpi_fill_slit and acpi_fill_srat were removed in commit 5e597572e.
Take care of the boards that were added in the mean time.
Change-Id: I907e51de5d4ce9acfcce82e6bb30eefff312d35d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10266
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Fix up commit 1b6e7a67 (Updates to the board status script) forgetting
to put `echo` in front of the string.
Change-Id: I7d4dfcc62545dfee2073410ba47489318a9bf5c6
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/10265
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
SLIT and SRAT are created this way only on amdk8 and amdfam10.
This saves the need of having a lot of dummies.
Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7052
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Every other arch we support has these options enabled.
Enable it to make everything a lot easier in compiling common
code.
Change-Id: I86205468bbd793fbd377e471a1d32be617af5302
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10258
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I9c938b8a69479fae6b0eb99d1135f1caaf26d0e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10227
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Intermediate linking may distort linker behavior (in particular related to
weak symbols). The idea is that archives are closer to 'just a list of
object files', and ideally makes the linker more predictable.
Using --whole-archive, the linker doesn't optimize out object files just
because their symbols were already provided by weak versions. However it
shouldn't be used for libgcc, because that one has some unexpected side-effects.
Change-Id: Ie226c198a93bcdca2d82c02431c72108a1c6ea60
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Add support for Nuvoton NCT6779D, using NCT6776 as a baseline
Change-Id: I020a21267f7e30bdea4bb5f83d67bd94082fdf05
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10232
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The variable was set on all haswell boards, so we can do it like on
broadwell where the MSR based timer is assumed to be around, too.
Change-Id: Id48ad7454d4cf83c3b1616b64687cdcfee4baa10
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10256
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
DYNAMIC_CBMEM is only selected a couple of times but never declared
or read. Remove it.
Change-Id: I5016dac2c935d3f261001e9f388a8989540e93ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10255
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
MAINBOARD_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: Ica1f16182b556dbf4a3b747237af74bcc4c0608c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10254
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10253
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The configuration of SPSR bits that mask processor exceptions is kinda
oddly hidden as an implict part of the transition() function right now.
It would be odd but not impossible for programs to want to be entered
with enabled exceptions, so let's move these bits to be explicitly set
by the caller like the rest of SPSR instead.
Also clear up some macro names. The SPSR[I] bit is currently defined as
SPSR_IRQ_ENABLE, which is particularly unfortunate since that bit
actually *disables* (masks) interrupts. The fact that there is an
additional SPSR_IRQ_MASK definition with the same value but a different
purpose doesn't really help. There's rarely a point to have all three of
xxx_SHIFT, xxx_MASK and xxx_VALUE macros for single-bit fields, so
simplify this to a single definition per bit. (Other macros in
lib_helpers.h should probably also be overhauled to conform, but I want
to wait and see how many of them really stay relevant after upcoming
changes first.)
BRANCH=None
BUG=None
TEST=None
Change-Id: Id126f70d365467e43b7f493c341542247e5026d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 715600c83aef9794d1674e8c3b62469bdc57f297
Original-Change-Id: I3edc4ee276feb8610a636ec7b4175706505d58bd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270785
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10250
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support for integrating the runtime-resident component
of ARM Trusted Firmware (github.com/ARM-software/arm-trusted-firmware)
called BL31. It expects the ARM TF source tree to be checked out under
$(top)/3rdparty/arm-trusted-firmware, which will be set up in a later
patch.
Also include optional support for VBOOT2 verification (pretty hacky for
now, since CBFSv1 is just around the corner and will make all this so
much better).
BRANCH=None
BUG=None
TEST=Booted Oak with ARM TF and working PSCI (with additional platform
patches).
Change-Id: I8c923226135bdf88a9a30a7f5ff163510c35608d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a1b3b2d56b25bfc1f3b2d19bf7876205075a987a
Original-Change-Id: I0714cc10b5b10779af53ecbe711ceeb89fb30da2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10249
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable:
Make more obvious that there's no code execution here after payload_entry.
[pg: taken from patch linked below]
Change-Id: Ia341e5d290b10ad5ba3edb349b8a7f619022d99f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10247
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: we need to sync the i-cache in both code paths, so do it in
a single location.
[pg: taken from patch linked below]
Change-Id: Iab173acfc6d66e4dccb6f6ab916aea2007632bfd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10246
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: Make spintable handling optional through a kconfig flag.
[pg: taken from patch linked below]
Change-Id: I64610640835473fcc3d9eff01feb5f861b753eb8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10245
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable. Improve locality of code.
[pg: taken from patch linked below]
Change-Id: Ie9ea6a10b9d5e5c33bf020369afcae4f10ef068e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10244
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Kyösti Mälkki