The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems,
based on a modern Kabylake CPU. It also ships with no firmware protection,
(IFD is fully unlocked, no protected regions are set, no Bootguard),
making it an ideal coreboot target. This port is based on the support for
the Skylake-based Purism Librem 13v3, with the following significant
changes:
* EC firmware is contained within the system SPI flash, and so a blob of
EC firmware must be injected to a defined location during image build.
* GPIO layout is different - this is currently just a raw import of the
GPIO configuration from the vendor firmware
* The system has two DIMMs, so an additional SPD address has been added
* The USB port layout is different
* The EC must be enabled at boot time through SuperIO-style logical device
configuration
* EC register layout is different, necessitating changes in the ACPI tables
* The HDA pins are different
* The genx_dec config is different
All hardware appears to work as expected, although the SD reader is
untested.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:
- Hillel: 32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics
This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.
Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
austin-3 was a devel board, retracting
t60 comes in variants with discrete gpu and only intel gpu one
Change-Id: Ic1f7397b8676bdcc15f63d59d87518d35bba5b4d
Signed-off-by: Sebastian "Swift Geek" Grzywna <swiftgeek@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Add a common page about Montevina ThinkPads.
- Describe how to disable ME and remove its firmware on these models.
- Describe vendor flash layouts.
Thanks to swiftgeek for his help when writing this, especially the last
paragraph and flash layouts.
Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This is a port of https://review.coreboot.org/c/coreboot/+/22337 to the
Haswell northbridge. This code is necessary to support the dGPU of the
t440p. Code was cut and pasted from Sandy Bridge with vendor IDs updated
to the correct Haswell values. Tested on t440p with dGPU on Ubuntu
18.04.4 with 5.3.0-28 kernel. Without patches dmesg reports Nouveau is
unable to read the VBIOS of the dGPU as it has an invalid checksum (I
checked that the ROM in CBFS is correct). With this patch DRM works
correctly with both the Nouveau driver and the Nvidia proprietary
driver. Windows 10 1909 also tested but generates bluescreen once GPU
driver is loaded.
Change-Id: Ie5f089fb6fd774e6c61f4f9281e2945bd44edf27
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Add a tutorial how to use ME cleaner, and give some basic steps to
strip the ME. Update the Lenovo Sandy Bridge documentation that no
issues could be observed on X220 and give an example flash layout.
Tested on Lenovo X220 with stripped ME and found no issues:
commit: cbc5b99ac9
* Displayport
* VGA
* USB
* Bluetooth
* Wifi
* Wifi-kill switch
* libgfxinit
* SATA
* Audio
* SD-card
* Ethernet
* Keyboard
* Fn-Keys
* Display brightness
* ACPI S3 resume
* Battery events
* CPU temperature reporting
* FAN managment
* Stress test stable
* Youtube videos over Wifi
* stress -c 2 -m 1 -d 1
* glxgears
Change-Id: I0b1d04f00b5dbb38cf04333f2b345749b740a375
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39129
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Fix lists markup
- Some minor fixes in the text (e.g. lowercases)
Change-Id: I812bdbeed6609c31f3428a3020fa4b32ebbb3445
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38948
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Latest Sphinx supports up path traversal in markdown. Replace old
RST code that's no longer needed to prevent it being copy and pasted.
Change-Id: Ieec5cc1f8d91a7fbc003efae465f61e6b72b39dc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Replace xx30 with Ivy_Bridge and xx20 with Sandy_Bridge.
Also add a note that the Ivy_Bridge tutorial doesn't covert T430s and T431s.
Change-Id: I0b65bca83195ec22cc139130e7cb6183c0972484
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Both versions are correct, but especially for one liners indenting them
with four spaces instead of using ``` blocks helps readability of the
source file.
Change-Id: Ie2543c8c4cccefd74e966f784e651ed7dc3a9252
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38720
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update to reflect the beta status of the code.
BUG=N/A
TEST=build
Change-Id: I9d1c42d24578c9420569da7e294d5c723da3c772
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add description of the procedure to create the flash components for this
system.
BUG=N/A
TEST=N/A
Change-Id: I2690dfbe715fa120f840d98c57fdc3fd7e8b45b1
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The System76 Lemur Pro (lemp9) is an upcoming laptop computer. Support
in coreboot is developed by System76 and provided as the default
firmware option. Testing is done on a pre-production model expected to
be identical from a firmware perspective to the production model.
Working:
- Payload
- Tianocore
- CPU
- Intel i7-10510U
- Intel i5-10210U
- EC
- ITE IT5570E running https://github.com/system76/ec
- Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend/resume
- Touchpad
- GPU
- Intel UHD Graphics 620
- GOP driver is recommended, VBT is provided
- eDP 14-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- Channel 0: 8-GB on-board DDR4 Samsung K4AAG165WA-BCTD
- Channel 1: 8-GB/16-GB/32-GB DDR4 SO-DIMM
- Networking
- M.2 PCIe/CNVi WiFi/Bluetooth
- Sound
- Realtek ALC293D
- Internal speaker
- Internal microphone
- Combined headphone/microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe/SATA SSD-1
- M.2 PCIe/SATA SSD-2
- RTS5227S MicroSD card reader
- USB
- 1280x720 CCD camera
- USB 3.1 Gen 2 Type-C (left)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
Not working:
- TPM2 - SPI bus 0, chip select 2 is used. Chip selects other than 0
are not currently supported by the intel fast_spi driver.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: Ib0a32bbc6f89a662085ab4a254676bc1fad7dc60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The BMC and tools interacting with it depend on metadata placed inside
the ROM in order the flash the BIOS.
Add a new tool smcbiosinfo, integrate it into the build system, and
generate a 128byte metadata file called smcbiosinfo.bin on build.
You need to provide the BoardID for every SMC mainboard through a new
Kconfig symbol: SUPERMICRO_BOARDID
Some fields are unknown, but it's sufficient to flash it using SMC
vendor tools.
Tested on Supermicro X11SSH:
* Flashing using the WebUI works
* Flashing using SMCIPMITool works
No further validation is done on the firmware.
Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The table wasn't pretty enough so sphinx complained, while the second
paragraph had trailing whitespace, could be wrapped differently and
also came with a typo.
Change-Id: I6c16a3a1fcc306d0b12043ebec7d4e69e9339d7d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The board is booting Linux and has been briefly tested.
SeaBIOS, TianoCore payload and Linux as payload all seem to work fine.
BUG=N/A
TEST=tested on Facebook Monolith
Change-Id: I65a2e03334af65cfb3f825d43fa0daa6e6c75913
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The mainboard was accidently added due to bad rebase.
Change-Id: Ie7215e551651dbbc8d92316c48e455405923a30b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36077
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The microcode is available in 3rdparty microcode now.
This ucode can be used.
BUG=N/A
TEST=build
Change-Id: I52a04c7dc97608f868ee0b415bbbb328937f18f7
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
The microcode is available in 3rdparty microcode now.
This ucode can be used.
BUG=N/A
TEST=build
Change-Id: I1d83a58e9051fa9402666f05e4f2c43e76026dfb
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36854
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The document isn't included in any toc-tree due to a typo.
Change-Id: Ic1491dde2d48b5d004fc28c743bbee6de12f433c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36540
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The code is based on autoport.
This port is tested on a T440p without a dGPU and can boot Arch Linux
from SATA disk with SeaBIOS payload. The tested components and issues
are in the documentation.
Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- This port should be Reclaim Your Freedom compliant
(not certified yet).
- Untested on boards with external Radeon graphics adapter.
- Some columns on the left-most side of display are completely
black on 1400x1050 IPS display[1]. Display works fine on Linux.
I don't know why it appears like that. So far it has been observed
only with native graphics initialization.
- Only GRUB2 and SeaBIOS payloads tested for now.
- 2504 docking station USB doesn't work under Linux.
Can detect pendrive in GRUB2 payload.
- Sometimes it takes 20s of "pretending it's powered off" to run
coreboot code. Issue is payload agnostic.
Probably caused by missing one capacitor on my unit.
[1] https://imgur.com/a/0wpMGsm
Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This adds another x11 series board, the X11SSM-F, which is similiar to
X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and
Ethernet interfaces.
Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
It is similar to X200s, with U-series CPU, slightly different gpio
setup, no docking support, and no superio chip.
Tested:
- CPU Core 2 Duo U9400
- Slotted DIMM 4GiB*2 from samsung
- Camera
- pci-e slots
- sata and usb2
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from
Linux payload (Heads) and Seabios.
TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in
CB:4294 ) for h8-using devices without a dock.
Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
On Hyper-Threading enabled platforms the MSR_PRMRR_PHYS_MASK was written
when already locked by the sibling thread. In addition it loads microcode
updates on all threads.
To prevent such race conditions only call the code on one thread, such
that the MSRs are only written once per core and the microcode is only
loaded once for each core.
Also add comments that describe the scope of the MSR that is being
written to and mention the Intel documents used for reference.
Fixes crash in SGX MP init.
Tested on Supermicro X11SSH-TF.
Change-Id: I7102da028a449c60ca700b3f9ccda9017aa6d6b5
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35312
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The port is based on the x201 / t410s.
2537-vg5 / i5, no discrete gpu
Tested and working:
* Native raminit
* Native gfxinit
* Booting Seabios 1.12.1
* Booting from EHCI
* Running GNU/Linux 5.0.0
* No errors in dmesg
* EHCI debug on the devices left side, bottom-right
* Keyboard
* Fn keys (Mute, Volume, Mic)
* Touchpad
* TPM
* Wifi
* Sound
* USB
* Ethernet
* S3 resume
* VBOOT
Testing in progress.
Untested:
* VGA
* Displayport
* Docking station
Bugs:
* AC adapter can't be read from ACPI
* TPM not working with VBOOT and C_ENV BB
Details for flashing externally:
1. Disconnect all power
2. Connect the external flasher
3. Connect the power cord (This fixes internal power control)
4. Remove the power cord
Change-Id: Id9d872e643dd242e925bfb46d18076e6ad100995
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/11791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Fixes an issue with amd/index.md not being part of a toctree
Change-Id: Id419695d24a49951afb844c81cc0951d6920e0d2
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
This splits the x11-lga1151-series' documentation into a generic and a
board specific section as a preparation for CB:35427.
Additionally this adds some more information on the x11ssh board.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Create documentation on padmelon, including how to program the SPI. Also
include an index.md pointing to the documentation, as currently there's no
maiboard documentation folder for AMD.
BUG=none.
TEST=none.
Change-Id: I1a684c1acd3fb9441df71e2bc0fffa6131148b98
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Matthew Garrett