This decouples the linear framebuffer type from the symbols needing it.
Change-Id: I733e630e0aa2fb2947d079caef26253ce443fe91
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If we are not using the UARTs or they don't have the correct GPIOs
configured we should let the mainboard disable them.
BUG=b:153001807
TEST=Dump SSDT and see UART device is disabled
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifc04e36e0ebe5cce4b6cc228c7174dc76f2ffa4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The option to have amdfw outside of CBFS used dd to write amdfw at a
given location overwriting anything that was there before, which may
cause the build to fail due to the FMAP header being overwritten
resulting in a not too obvious error that the image is a legacy image
without FMAP header.
Mandolin was the only board using this functionality, but I fixed the
placement of components in the flash image there, so that amdfw can just
be placed in CBFS avoiding those problems.
Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With RELOCATABLE_RAMSTAGE the backing up of low memory
on S3 resume path was dropped. We forgot some things
behind.
Change-Id: I674f23dade0095e64619af0ae81e23368b1ee471
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
For baytrail and braswell, explicitly initialise
it to ACTIVE_ECFW_RO without ChromeEC.
For broadwell and skylake, fix it to report actual
google_ec_running_ro() status.
Change-Id: I30236c41c9261fd9f8565e1c5fdbfe6f46114e28
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42389
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings (~36 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~25 ms for an extra overhead of ~1KiB.
LZ4 Compression:
fsps.bin 0xe6fc0 fsp 254262 LZ4 (290816 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 712,361 (1,072)
18:finished LZ4 decompress (ignore for x86) 750,695 (38,334)
LZMA Compression:
fsps.bin 0xe6fc0 fsp 253415 LZMA (290816 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 707,696 (1,150)
16:finished LZMA decompress (ignore for x86) 767,763 (60,067)
BUG=b:158034451
TEST=Build and boot volteer mainboard.
Change-Id: I91e33eb7b688b5383f3a0075a28ac21250314973
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42444
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use LZ4 compression technique to compress FSP-S. This provides some
SPI ROM space savings(~60 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZ4 is chosen over LZMA since the decompression saves
~50 ms for an extra overhead of ~1.5 KiB.
LZ4 Compression:
fsps.bin 0xa9fc0 fsp 203423 LZ4 (262144 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 433,550 (1,154)
18:finished LZ4 decompress (ignore for x86) 461,620 (28,069)
LZMA Compression:
fsps.bin 0xa9fc0 fsp 202132 LZMA (262144 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 478,448 (1,174)
16:finished LZMA decompress (ignore for x86) 557,725 (79,277)
BUG=b:158034451
TEST=Build and boot waddledoo mainboard.
Change-Id: I416b1d91d7f4836b1e9c641b0fe07b39876364ba
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use LZMA compression technique to compress FSP-S. This provides some
SPI ROM space savings(~27 KiB) in each CBFS. FSP-M is XIP and hence not
compressed. LZMA is chosen over LZ4 since it provides extra space
savings of ~1 KiB for the decompression overhead of ~7 ms.
LZMA Compression:
fsps.bin 0xd1fc0 fsp 190132 LZMA (217088 decompressed)
LZMA Decompression:
15:starting LZMA decompress (ignore for x86) 343,289 (417)
16:finished LZMA decompress (ignore for x86) 373,922 (30,632)
LZ4 Compression:
fsps.bin 0xd1fc0 fsp 191310 LZ4 (217088 decompressed)
LZ4 Decompression:
17:starting LZ4 decompress (ignore for x86) 345,676 (581)
18:finished LZ4 decompress (ignore for x86) 369,101 (23,424)
BUG=b:158034451
TEST=Build and boot helios mainboard.
Change-Id: Ic0d0d81c81eaa365f3dbfdd2e00ac76cea287387
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42446
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jasper Lake has been using the incorrect MemInfoHob header. Updating
the header to align it with Jasper Lake MRC code.
BUG=b:158722318
TEST=Verify memory info is populated for channnel 0 and 1 on wadddledoo.
Change-Id: Icca3e3b4cda9ca257f3b725823facf52ceec37b7
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Upcoming variant boards will use 16 MiB SPI ROM. So add support for 16
MiB flash map descriptor.
BUG=b:155107866,b:152981693
TEST=Build different variant boards. Ensure that waddledoo which is using
32 MiB SPI ROM boots.
Cq-Depend: chrome-internal:3107306
Change-Id: I8a6868da3280a662ff3a30623804ff135e6cbfbc
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Remove unused cannonlake dptf.asl file and cleanup defines from apollolake
dptf.asl file as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on the system
Change-Id: I4c8bf2bd5da9d5881e7690bff34816b19dd96072
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Remove cannonlake dptf.asl include file from all the dsdt files
as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on the system
Change-Id: I961a3ecb27e7bb7bb0b98c8630900bada0531639
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Make dptf acpi device ids configurable for thermal functionality
as per soc/intel/common/acpi code changes for dptf.
BUG=None
BRANCH=None
TEST=Build and boot on volteer system
Change-Id: I5161d19dc663cdb9a7b004bb681059c9af2aaf4f
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It is the reference board of TGL-Y platform, we want to disable EC SW
sync for Proto stage, it would be re-enabled before EVT stage.
BUG=b:156435028
TEST=FW_NAME=terrador emerge-volteer coreboot chromeos-bootimage
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ie7999e24e9c173d4870b35ce1728f3dcc8dcac29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42090
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Group entries by categories, and sort the groups alphabetically. Also,
separate different mainboard vendors with two extra spaces for clarity.
Change-Id: I43df8c24a40433357760827777497cbac4b6a919
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fix last legacy ASL syntax match in acpi/pcr.asl
BUG=none
TEST=Deltan coreboot binary remains the same after the changes are
applied
Signed-off-by: Alexey Buyanov <alexey.buyanov@intel.com>
Change-Id: Ia1021851b42b8fad52b3197d9003056d3dd2db04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42437
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change the name of these variables to 'allowlist'.
Change-Id: I9d5553988a1c9972b8f1ebaeee20878b23a8aa9b
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42316
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Once we support building stages for different architectures,
such CONFIG(ARCH_xx) tests do not evaluate correctly anymore.
Change-Id: I599995b3ed5c4dfd578c87067fe8bfc8c75b9d43
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit d5f1e0f973.
Reason for revert: FSP-S is now fixed to not touch the SPI
configuration registers. Thus, coreboot does not need to reconfigure
SPI after FSP-S has run.
BUG=b:153506142
TEST=Verified that SPI configuration registers look the same before
and after FSP-S has run. em100 works fine without any additional
changes in coreboot to reconfigure SPI.
Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
If a UCSI event comes in when the EC is in S0ix mode then the kernel
driver attempts a transaction but fails and this can leave the system
in an unexpected state where the only wake source is the power button.
This change will not notify the UCSI driver if the EC is in S0ix mode
and instead keep track of the event and send it on resume.
BUG=b:157923800
TEST=tested on drallion system:
1. Put drallion system into suspend
2. Attach power supply
3. Ensure the system can wake with keypress
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Change-Id: I43acb089385d9b41ac955f053e409daad67423f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42237
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Temporary workaround for S0ix issues related to FSP's handling of 0 value.
When IomTypeCPortPadCfg is 0 FSP completely skips any flow related to this
value which seems to be causing issues with s0ix.
This is still being debugged and a final solution will be made when available
BUG=b:159151238
TEST=flash image with workaround to volteer and verify that s0ix
cycles correctly.
Change-Id: Id79dd1c49958389cdb666b3760abd821bc1973a8
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42268
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The PICASSO_UART Kconfig option is about using the internal MMIO UART
controllers in Picasso for console, so rename it to PICASSO_CONSOLE_UART
Change-Id: I38ac9ee96af826fe49307b4d0e055a43fcbd4334
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This change includes uart.c in bootblock, romstage, ramstage and
verstage unconditionally because this file is handling more than just
the UART console configuration. This allows boards to take advantage
of picasso_uart_mmio_ops even if PICASSO_UART is not selected.
uart_platform_base and uart_platform_refclk mustn't be provided if
PICASSO_UART is unset, so add an #if around those functions.
BUG=b:158346697
TEST=Mandolin builds again.
Change-Id: If1173034b0d2ed32f77241768e1e8abb208aac3a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42339
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In its current state, it draws more dependencies in than it solves
which makes it useless.
Change-Id: I08f592731c3da2ac19e1f93682256f559a067fc4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch adds support for enabling/disabling PCIe hot-plug via
a chip config option PcieRpHotPlug, which is copied to the corresponding
FSP-S UPD.
BUG=b:156879564
BRANCH=none
TEST=Boot Volteer/RVP with FSP log and check hotplug enabled/disabled
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4c0187644b6ca9735f1b159e110e3466af14ff71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41794
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Use the introduced functions and verify pointers in the SMMSTORE.
Make sure to not overwrite or leak data from SMM and update the
documentation as well.
Change-Id: I70df08657c3fa0f98917742d8e1a6cb1077e3758
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41085
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add a function to check if a region overlaps with SMM.
* Add a function to check if a pointer points to SMM.
* Document functions in Documentation/security/smm
To be used to verify data accesses in SMM.
Change-Id: Ia525d2bc685377f50ecf3bdcf337a4c885488213
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41084
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add CFL defaults for VR TDC config and provide Iccmax for additional Xeon
CPUs tested on the Prodrive/Hermes board.
Based on the following Intel documents:
* Document Number 570805 (XEON E EDS Vol 1)
* Document Number 337344 (CFL Datasheet Vol 1)
* Document Number 571264 (CFL CNP PDG)
Change-Id: I681de076318fb647c44cc8b8c42eb297018cc540
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This makes future changes easier to review.
Change-Id: I5d67801a46a1613fbc7f813e94933fa30c1b92df
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Read the PCH Strap Length field in FLMAP1 as described in the
"SPI Programming Guide" and print the number of fields specified there.
This code dumps the following straps:
* Intel GM45: 8 straps
* Intel C216: 72 straps
* Intel C240: 360 straps
Add a new function to easily set PCH straps, which is useful for debugging.
Change-Id: Ieb7891b214d82c984379794de9b3fe1a6d0d3466
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Added device hid info to the MST and LSPCON devices on
kaisa, duffy and noibat.
BRANCH=None
BUG=b:156546414
TEST=None
Signed-off-by: Shiyu Sun <sshiyu@chromium.org>
Change-Id: I7b54512cd88e7280374c188315cabc2fba197f69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
This reverts commit aac79e0b8f.
Reason for revert: This massively slows down the boot process because
the LAPIC delivery mode for the APs is not set anymore. Plus, not all
review comments were fully addressed, yet this got merged in anyway.
Change-Id: If9bae6aae0d4d1f21b067a7d970975193c2b16d5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Add two fields for the ACPI logical device to the ACPI code. They are
used for taking asus/p3b-f board out of suspend by keyboard or mouse.
Change-Id: Icaadfea6a4dce7a2d665e8d89a024359975f8b2c
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41096
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When Linux is booted, the kernel reports
"do_IRQ: 1.55 No irq handler for vector"
So far it comes with payloads SeaBIOS and depthcharge, not with
Grub. We assume Grub does something to avoid this problem.
AMD bug tracker system (JIRA PLAT-21393) says the APs can not be set
EXTINT delivery mode.
In Intel 64 and IA-32 Architectures Software Developer’s Manual volume
3A, see chapter 10.5.1 Local Vector Table, it says:
"The APIC architecture supports only one ExtINT source in a system,
usually contained in the compatibility bridge. Only one processor in the
system should have an LVT entry configured to use the ExtINT delivery
mode."
Tested on mandolin (Picasso) board, the error in dmesg is gone.
The bug 153677727 has two parts.
1. Soft lockup
2. do_IRQ 1.55.
The soft lockup issued has been fixed by
https://review.coreboot.org/c/coreboot/+/41128
BUG=b:153677727
TEST=mandolin
Change-Id: I2956dcaad87cc1466deeca703748de33390b7603
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42219
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
mainboard_intr_data table mixed hexadecimal notation with
both small and capital letters. Now, it is unified to capitals only.
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Change-Id: Icd8cf4324e72e87e7e98869872785523fb4e1809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42388
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Angel Pons