This change adds a new config option OVERRIDE_DEVICETREE that allows
variants to provide an override devicetree file to override the
registers and/or add new devices on top of the ones provided by
baseboard devicetree using CONFIG_DEVICETREE.
BUG=b:80081934
Change-Id: Ica046b7e0d70d0f1e8d94da714d1e62032277916
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/26691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Scan-build refuses to run if the -fconserve-stack flag is added to
cflags. It fails with the cryptic message "could not find clang line".
Change-Id: Ib1b56ef7d217138a1a195fe993d8e8dd965bd855
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/26878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Masked ROMs are the silent killers of boot speed on devices without
memory-mapped SPI flash. They often contain awfully slow SPI drivers
(presumably bit-banged) that take hundreds of milliseconds to load our
bootblock, and every extra kilobyte of bootblock size has a hugely
disproportionate impact on boot speed. The coreboot timestamps can never
show that component, but it impacts our users all the same.
This patch tries to alleviate that issue a bit by allowing us to
compress the bootblock with LZ4, which can cut its size down to nearly
half. Of course, masked ROMs usually don't come with decompression
algorithms built in, so we need to introduce a little decompression stub
that can decompress the rest of the bootblock. This is done by creating
a new "decompressor" stage which runs before the bootblock, but includes
the compressed bootblock code in its data section. It needs to be as
small as possible to get a real benefit from this approach, which means
no device drivers, no console output, no exception handling, etc.
Besides the decompression algorithm itself we only include the timer
driver so that we can measure the boot speed impact of decompression. On
ARM and ARM64 systems, we also need to give SoC code a chance to
initialize the MMU, since running decompression without MMU is
prohibitively slow on these architectures.
This feature is implemented for ARM and ARM64 architectures for now,
although most of it is architecture-independent and it should be
relatively simple to port to other platforms where a masked ROM loads
the bootblock into SRAM. It is also supposed to be a clean starting
point from which later optimizations can hopefully cut down the
decompression stub size (currently ~4K on RK3399) a bit more.
NOTE: Bootblock compression is not for everyone. Possible side effects
include trying to run LZ4 on CPUs that come out of reset extremely
underclocked or enabling this too early in SoC bring-up and getting
frustrated trying to find issues in an undebuggable environment. Ask
your SoC vendor if bootblock compression is right for you.
Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/26340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch adds the CCACHE_EXTRAFILES variable to the list of exported
environment variables, which can be useful as a target-specific variable
to make ccache aware of extra dependencies that it cannot figure out on
its own. It also adds a CPPFLAGS parameter to define the __BUILD_DIR__
constant for the preprocessor so that the current output build directory
can be referenced in C code if necessary.
Change-Id: I4fdd08842972cfed8ef5e5a61ebf859c0571bcfb
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/26451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This patch moves the objcopy invocation that changes the bootblock's
section flags to make sure .data and .bss are preserved in the binary
image from the generation of bootblock.raw.bin into a separate
bootblock.raw.elf file. Some SoCs (like SDM845) like to have an ELF
rather than a raw binary as input to their masked ROM wrapper
generation script.
Also move those objcopy flags out into a variable because I'll need them
again in a later patch.
Change-Id: I9557b184df7f753a442c7e0ceb58e81c5e19f2c5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/26338
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We use packed structs with unaligned members all the time, which is the
entire point of us using the packed attribute.
Change-Id: Ib26b422ba83257d1a7f26134ee20217fad5823cd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/25996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
As I mention in the comment, this is valid ASL, which was added as
a warning with the comment "This would appear to be worthless in
real-world ASL code." While code using empty resource templates
could probably be rewritten, this seems like an arbitrary choice
to generate this as a warning, since it's valid.
This gets rid of warnings such as this one:
dsdt.aml 2975: Return (ResourceTemplate() {})
Warning 3150 - Empty Resource Template (END_TAG only)
Which is generated by this code in google/rambi/acpi/mainboard.asl:
Method (_CRS)
{
/* Only return interrupt if I2C1 is PCI mode */
If (LEqual (\S1EN, 0)) {
Return (^RBUF)
}
/* Return empty resource template otherwise */
Return (ResourceTemplate() {})
}
Change-Id: I9cfe9069c738a284aa85feada9d58e1aee97e433
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/26352
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The `-t` argument was never required for `add-payload` and results in
a warning now because the type was renamed.
TEST=Built with BUILD_TIMELESS=1 and compared binaries with and without
this patch.
Change-Id: I6ccb70acc6e88a602b90c625040d4f05d8e3630a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/26323
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allow bootblock to get access to the entire static device tree
as other stages can access independently.
TEST=SMM code now can access devicetree.cb variables.
Change-Id: I59537c16f0a459e48d8b1efb5c1b196302f13381
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/23823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently, at the end of a build `CBFSPRINT` prints the content of all
CBFS regions. This is confusing, as they are identical. To avoid
confusion print the layout beforehand.
> layout [-w] – List mutable (or, with -w, readable) image regions
Change-Id: Ibf03b125ef6dae41c58b8ae867430047778cfff3
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/22143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Both GRUB and SeaBIOS can chainload lzma compressed payloads.
Therefore it is beneficial to compress secondary payloads
like Memtest86+, coreinfo, nvramcui,... for both size reasons and
often also speed reasons since the limiting factor is generally the
IO of the boot device.
Tested with SeaBIOS and memtest86+ master on Thinkpad X220.
Change-Id: Iddfd6fcf4112d255cc7b2b49b99bf5ea4d6f8db4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
As the code was moved from the Makefile.inc to a separate file in
commit 9ab8ae6a (util/gitconfig: Make gitconfig a bash script),`$(MAKE)`
was replaced by `remake`, introducing dependency on this tool which is
basically a `make` with debugging capabilities. Many developers don't
have `remake` installed, leading to pre-commit hooks being not executed
properly. Apparently this was an unintentional change.
Furthermore, special treatment of `make` tool via the `%MAKE%`
substitution performed during hooks' deployment is still desired. Use
case is calling `remake gitconfig` to set `remake` as the `make` tool in
the hooks. To accomplish this, add a parameter that is passed from the
Makefile.inc to gitconfig.sh.
Change-Id: Ia78e06567b904b342dc9b7778569201fe02e6897
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
`Makefile.inc` checks for `.git` to be present under $(top) to define
the value of $GIT. This check is rather weak and doesn't handle many
edge cases like that of a broken gitfile.
Add a proper `git rev-parse` call to check the condition.
Change-Id: Ifd6da19f13d9f2a9fddb6afd7cb5f16daba2401e
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This automatically generates an FMAP region for the MRC_CACHE driver
which is easier to handle than a cbfsfile.
Adds some spaces and more comments to Makefile.inc to improve
readability.
Tested on Thinkpad x200 with some proof of concept patches.
Change-Id: Iaaca36b1123b094ec1bbe5df4fb25660919173ca
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The name blobtool is confusing as 'blob' is also used to
describe nonfree software in binary form.
Since this utility deals with binary configurations it
makes more sense to call it bincfg.
Change-Id: I3339274f1c42df4bb4a6b30b9538d91c3c03d7d0
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Reviewed-on: https://review.coreboot.org/23239
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the option to use the lz4 compression method
to compress payloads.
Also sets LZ4 as the default compression method.
Change-Id: Ic712f984f791d268440c8463eaea0d246aa31d99
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/15817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The gitconfig target has a few bashisms and would fail
silently on systems that use a POSIX standard sh (like Ubuntu dash).
Remove the code from the makefile and put it in a bash script that
is called by the gitconfig target.
Change-Id: I3bc8cf688a3ad211b57c8ca0e6b1e86c82dc6a37
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/22857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The BOARD_ID_MANUAL and BOARD_ID_STRING options were introduced for the
Urara board which is now long dead, and have never been used anywhere
else. They were trying to do something that we usually handle with a
separate SKU ID these days, whereas BOARD_ID is supposed to be reserved
for different revisions of the same board/SKU. Get rid of it to make
further refactoring of other options easier.
Also shove some stuff back into the Urara mainboard that should've never
crept into generic headers.
Change-Id: I4e7018066eadb38bced96d8eca2ffd4f0dd17110
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22694
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's already one in util/blobtool/Makefile.inc
BUG=chromium:787042
TEST=no more warning about duplicate rules
Change-Id: I8bc17d3b182369cf5b67bdcf392db7932e5389bf
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/22555
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit just moves the vboot sources into
the security directory and fixes kconfig/makefile paths.
Fix vboot2 headers
Change-Id: Icd87f95640186f7a625242a3937e1dd13347eb60
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/22074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
As long as user.name and user.email are set, gitconfig should pass. This
handles if values are only set for the local repo, or if values are
stored in ~/.config/git/config
BUG=none
TEST=make gitconfig
Change-Id: Ie01e7a155f9e6db35d5991e4303aad85fb277a06
Signed-off-by: Chris Ching <chingcodes@google.com>
Reviewed-on: https://review.coreboot.org/22109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
It was only set by accident. `-gnatg` is a special mode for GNAT
internals and libgnat (we already set it explicitly for the latter).
TEST=Gave libgfxinit a shot on lenovo/t420.
Change-Id: Ie56a95da2dafd014bd6152cb419a2d315e7c78c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a macro to shift a value to the left by a specified number of bits.
Change-Id: Ib3fb43b620f31fee2a41f00ddf7294edc81a60f6
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
This can be useful to unexport them later.
Change-Id: I2ce9eff32d817ec190441550116376843abd1c11
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Commit 7c8d331fbb "Fine-tune compiler flags" added CFLAGS that are not
existing on CLANG hence breaking building coreboot with clang.
Fixes: https://ticket.coreboot.org/issues/134
Change-Id: Ie0250e285b0c5a9f8ee2eb99401aeca875d2789a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Per default, GCC enables -fdelete-null-pointer-checks, which is
harmful and hence we should disable it:
"Assume that programs cannot safely dereference null pointers, and
that no code or data element resides there."
We want to be careful with our stack usage, hence enable
-fconserve-stack:
"Attempt to minimize stack usage. The compiler will attempt to use
less stack space, even if that makes the program slower."
Change-Id: I74eac2b07c986553f79898a2f2e57bbead4223f8
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/20883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Currently the only testing we had was 'what-jenkins-does' and
'make lint'. While the lint testing is suitable for developers,
the 'what-jenkins-does' target really isn't, as it was designed
specifically for testing on jenkins.
This adds the infrastructure for basic tests that are more suitable
for the developer. Extended tests and improvements will follow.
Add the coreboot-builds directories to .gitignore.
TODO:
- Save/restore .config
- Update test-abuild to use existing COREBOOT_BUILD_DIR variable
Change-Id: I19e1256d79531112ff84e47a307f55791533806f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
In preparation for expanding the testing, move the test targets
out of the top level Makefile.inc and into a separate
subdirectory.
Change-Id: Ie252c7555223f9ce76b54e6f7b66d03f3cf60500
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/20873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@google.com>
The coreboot sites support HTTPS, and requests over HTTP with SSL are
also redirected. So use the more secure URLs, which also saves a
request most of the times, as nothing needs to be redirected.
Run the command below to replace all occurences.
```
$ git grep -l -E 'http://(www.|review.|)coreboot.org'
| xargs sed -i 's,http://\(.*\)coreboot.org,https://\1coreboot.org,g'
```
Change-Id: If53f8b66f1ac72fb1a38fa392b26eade9963c369
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/20034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
If CONSOLE_SPI_FLASH config is enabled, we write the cbmem
messages to the 'CONSOLE' area in FMAP which allows us to grab the
log when we read the flash.
This is useful when you don't have usb debugging, and
UART lines are hard to find. Since a failure to boot would
require a hardware flasher anyways, we can get the log
at the same time.
This feature should only be used when no alternative is
found and only when we can't boot the system, because
excessive writes to the flash is not recommended.
This has been tested on purism/librem13 v2 and librem 15 v3 which
run Intel Skylake hardware. It has not been tested on other archs
or with a driver other than the fast_spi.
Change-Id: I74a297b94f6881d8c27cbe5168f161d8331c3df3
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/19849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
The ramstage-c-ccopts variable needs to be double dereferenced
for the cbfs-files-processor-struct handler so all the ccopts
are included since the ramstage-c-ccopts is fully constructed
later by another function. Without this not all the flags
are present on the command line.
Change-Id: I5425b3c1f23d767c61f654dd287584403f85d719
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/19380
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Add a Makefile.inc, based on sconfig's, to use the _shipped variants
so that the build doesn't have to generate them with flex & bison.
The GENPARSER check is inactive, and will be updated in the next
commit.
Add the c_shipped & h_shipped files for the current .l & .y files.
Change-Id: Ia6c68bfb6e0611ceb6bc76cc66e43266bafc98ad
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/19228
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With COREBOOT_BUILD_DIR set, nvramcui & coreinfo were getting built
in the wrong location, causing those builds to fail.
Also, because they were built in the wrong location, the build failures
were not detected by jenkins which was looking for the junit.xml files
under the payloads directory.
Change-Id: I9d81ebabebe5d8b5f79ae63f8a5f388430e06754
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/19069
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
In builds without CONFIG_VBOOT_SEPARATE_VERSTAGE, verstage files are
linked directly into the bootblock or the romstage. However, they're
still compiled with a separate "libverstage" source file class, linked
into an intermediate library and then linked into the final destination
stage.
There is no obvious benefit to doing it this way and it's unclear why it
was chosen in the first place... there are, however, obvious
disadvantages: it can result in code that is used by both libverstage
and the host stage to occur twice in the output binary. It also means
that libverstage files have their separate compiler flags that are not
necessarily aligned with the host stage, which can lead to weird effects
like <rules.h> macros not being set the way you would expect. In fact,
VBOOT_STARTS_IN_ROMSTAGE configurations are currently broken on x86
because their libverstage code that gets compiled into the romstage sets
ENV_VERSTAGE, but CAR migration code expects all ENV_VERSTAGE code to
run pre-migration.
This patch resolves these problems by removing the separate library.
There is no more difference between the 'verstage' and 'libverstage'
classes, and the source files added to them are just treated the same
way a bootblock or romstage source files in configurations where the
verstage is linked into either of these respective stages (allowing for
the normal object code deduplication and causing those files to be
compiled with the same flags as the host stage's files).
Tested this whole series by booting a Kevin, an Elm (both with and
without SEPARATE_VERSTAGE) and a Falco in normal and recovery mode.
Change-Id: I6bb84a9bf1cd54f2e02ca1f665740a9c88d88df4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/18302
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
We rely on gnu make, so we can expect the jobserver to be around in
parallel builds, too. Avoids some make warnings and slightly speeds up
the build if those sub-makes are executed (eg for arm-trusted-firmware
and vboot).
Change-Id: I0e6a77f2813f7453d53e88e0214ad8c1b8689042
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/18263
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Without this motherboards that requires a non zero timeout for ps2
keyboards on SeaBIOS don't build when CONFIG_UPDATE_IMAGE is set.
An alternative way to achieve this file would be to include a cbfsfile
instead of calling cbfstool. That way the file gets updated/added both
both image update and regular build. A difficulty of that approach is
that it needs to convert a decimal to a binary in little endian
representation, which is not a trivial thing to do in a Makefile.
Change-Id: Icafba8d3e279a2e70e607abba81e3dbebfb55e4b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18231
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
It takes a long time for no gain: We don't need to update the
submodules, we don't need to fetch the revision, we don't need to find
the compilers, when all we want to do is to manipulate the .config file
or clean the build directory.
Change-Id: Ie1bd446a0d49a81e3cccdb56fe2c43ffd83b6c98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18182
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Change-Id: I7bd0a17f9b20e46aee836fef1ff0b39de8670a15
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/18202
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Different compiler versions use a different C language standard by
default.
GCC 4.9 uses GNU89 by default [1], while GCC 5.x uses GNU11 [2].
The discussion on the mailing list in thread *[RFC] Setting C99 by
default* [3] resulted in the preference of C11, which results in build
errors.
So explicitly set it to GNU11, which is also what the current coreboot
toolchain with GCC 5.3 is using.
[1] https://gcc.gnu.org/onlinedocs/gcc-4.9.4/gcc/C-Dialect-Options.html
[2] https://gcc.gnu.org/onlinedocs/gcc-5.4.0/gcc/Standards.html
[3] https://www.coreboot.org/pipermail/coreboot/2016-November/082541.html
Change-Id: If1569618f8044925ff72dcf3543480b34d4f90d6
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17636
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
- Update the junit.xml target to make it less util specific
- Add builds of coreboot internal payloads: nvramcui and coreinfo
Change-Id: I97fda909065659ab7fa4c8ee00d936d97b255bf7
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17014
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
export VARIANT_DIR at the top level, rather than doing so multiple
times at the SoC / board level
Change-Id: If825701450c78289cb8cca731d589e12aafced11
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/17451
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
amdfwtool was getting the ROM size as a #define when it was built.
It has been updated to pass it in as a command line parameter, so
now it can be built just once for abuild as a shared tool.
Update the calls to amdfwtool to pass the ROM size.
All platforms using amdfwtool had the output verified using
a binary compare.
This reverts commit 0529236ed2
(Makefile.inc: Don't share amdfwtool between platforms)
Change-Id: I188b34e08249f2d00bd48957ced750b21f1ec348
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17327
Tested-by: build bot (Jenkins)
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
`libhwbase` is a SPARK library that contains some basic support for i/o
access, debugging, timers. Just what I put around `libgfxinit`, to make
it build standalone.
Change-Id: I1918680c14696215522e1c5dae072235bb4e71a3
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Ada knows a pragma `Debug` that is used to exclude procedure calls from
a release build. The new option `DEBUG_ADA_CODE` enables those procedure
calls.
Change-Id: Id5298e5819606c3d1cf2a2a1cd4f1d5d1227aa4f
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16943
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Some distribution compilers enable Position Independent Executable (PIE)
by default, causing a build failure.
So explicitly disable PIE by passing the flag `-fno-pie`, to fix the
build error.
Change-Id: I1b7d7168e34c5c93c25bc03ffa49b2eeac0e76f8
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/17097
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
amdfwtool currently gets built for a specific size of ROM chip. This
should be updated to be passed in on the amdfwtool command line, but
until that's done, stop sharing the tool between builds.
This caused a problem for abuild when we tried changing the default
rom to one that used a 256KB rom chip. That wasn't large enough for
all of the files included by amdfwtool on several platforms, causing
build failures.
Change-Id: Ib08f3283e5be956f995a4a416a70b12a32462882
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/17070
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch adds '--includes' option to 'git config --global' command
to allow user name and email to be defined in a file included from
the global gitconfig (~/.gitconfig) file.
BUG=none
BRANCH=none
TEST=make gitconfig with ~/.gitconfig including another file which
defines user.name and email.
Change-Id: I4fe61078b143c3a2e26b0be69c3ca8e6f069d8b0
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/16912
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
All systems are building with IASL warnings as errors enabled.
Remove the option to disable it.
Remove the notification at the end of the build.
Change-Id: I5c6218c182fdf173b4026fd010d939a5fa36040e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16606
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Updating submodules seem to give people headaches, so this adds a pair
of git aliases to update them.
'git sup' updates the submodules to the latest versions, but leaves any
locally modified files.
'git sup-destroy' will remove the current submodules and re-initialize
them. This deletes any local changes.
Change-Id: Id62a30d88b3b6d285b3f00555d7609509aa1561f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16573
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a stripped-down version of libgnat. This is somehow comparable to
libgcc but for Ada programs. It's licensed under GPLv3 but with the
runtime library exception. So it's totally fine to link it with our
GPLv2 code and keep it under GPLv2.
Change-Id: Ie6522abf093f0a516b9ae18ddc69131bd721dc0c
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/11836
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Some remarks on the make process:
o We usually leave Ada specs (.ads files which are like c headers)
together with the bodies (implementations in .adb files) in one
directory. So we have to know, where they live.
o If there is no matching .adb an .ads is a valid source file and
we'll generate an object file from it.
o Object files need to have the same basename as their source files :-/
That's why we put them in build/<class>/ dirs now.
o We track dependencies by looking at the compiler output (.ali files
which accompany every .o). This way we don't need any gnatmake
magic, or even more complex, less portable tools.
For ADAFLAGS_common, I simply copied the CFLAGS_common whilst dropping
everything unsupported and adding sane warning options.
The set of language features is highly restricted (see gnat.adc). This
should suit the embedded nature of coreboot and helps proving absence
of runtime errors with SPARK.
Change-Id: I70df9adbd467ecd2dc7c5c1cf418b7765aca4e93
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Commit 93ef3ff makes the following only print the part number when
the ROM is built. In Makefile.inc, $(MAINBOARDDIR) is the variable
that has the quotes stripped off from $(CONFIG_MAINBOARD_DIR), so
use it instead of $(MAINBOARD_DIR).
build_complete:: coreboot
printf "\nBuilt %s (%s)\n" $(MAINBOARD_DIR) \
$(CONFIG_MAINBOARD_PART_NUMBER)
Change-Id: I729a583182937db7a926eb75aa28dfb53360046c
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/16410
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This patch adds functionality to compile a C data structure into a raw
binary file, add it to CBFS and allow coreboot to load it at runtime.
This is useful in all cases where we need to be able to have several
larger data sets available in an image, but will only require a small
subset of them at boot (a classic example would be DRAM parameters) or
only require it in certain boot modes. This allows us to load less data
from flash and increase boot speed compared to solutions that compile
all data sets into a stage.
Each structure has to be defined in a separate .c file which contains no
functions and only a single global variable. The data type must be
serialization safe (composed of only fixed-width types, paying attention
to padding). It must be added to CBFS in a Makefile with the 'struct'
file processor.
Change-Id: Iab65c0b6ebea235089f741eaa8098743e54d6ccc
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/16272
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
That's more useful than just COREBOOT for more complex scenarios
Change-Id: I93cd686d698799a3331ca2ea487cd6efb304caa0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16143
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
It was a band-aid that isn't required any more.
Change-Id: Ib1793ae8fe25eecf9bd5ab8e5feef0d9380b43c2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16142
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
To override fallback/foo's position or alignment in region BAR, use
fallback/foo-BAR-{position,align} = 0x1234
Like for the global settings, specifying both isn't allowed
because that's rather pointless.
Change-Id: I94f41ebc9f35108267265df4164f23b70e3d0bf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
They're now sorted later in the process after the per-region file lists
are determined.
Change-Id: I0bba381d09dc4b99e2fe5cae16ff7ffcb5b3aa82
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16138
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Make sure that files with a fixed position are placed first (whose order
doesn't matter: either they collide or they don't), then all aligned
files (where we just hope that the right thing happens) and finally the
files with no further requirements (again, hope).
It's still a pretty good heuristic given a typical coreboot image.
The global sorting that happens earlier in the build flow will be
removed in the future to make room for per-region requirements.
Change-Id: I269c00b2ece262c95d310b76a6651c9574badb58
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16137
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Instead of adding each file in all requested regions, sort by region,
then by file.
This is in preparation of per-region file options
(eg. position, alignment)
Change-Id: Ide09a1c8840279380294a059bbd5d2f9f0cba780
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/16130
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
The variable MAINBOARD_DIR already has the quotes stripped off.
Change-Id: Ib434ce92bdbc49180fb3f713b26d65ba4cf8c441
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16117
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Minor change - Instead of stripping the quotes from CONFIG_DEVICETREE
inline, add it to the location where we normalize all the other Kconfig
variables.
Change-Id: Idbc58179c7b45160afef7d7e44f9b3b334f8c4a7
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16116
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The mainboard chip.h files were (mostly) removed long ago.
Change-Id: I1d5a9381945427c96868fa17756e6ecabb1048b2
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16080
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of having directories and file names hardcoded, pass in the full
path and filename of both the input and output files.
In the makefile, create variables for these values, and use them in
places that previously had the names and paths written out.
Change-Id: Icb6f536547ce3193980ec5d60c786a29755c2813
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/16078
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of forcing the hardcoded 'devicetree.cb' filename under the
mainboard directory, this allows mainboards to select a filename for
the devicetree file.
This allows mainboard variants that need to use different devicetree
files to live under the same directory.
Change-Id: I761e676ba5d5f70d1fb86656b528f63db169fcef
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12529
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The first attempt of providing a options-for-region function to call
to determining a file's cbfstool options would work, but it means there
can only be one instance which has to handle all of the files that may
need an override. That logic can be problematic in impelementation.
Instead, provide a mechanism to target cbfstool options for a given
CBFS region where the implementation is tightly coupled in the build
system to where the file as requested to be added to cbfs. This allows
there to be a base set of cbfstool options while more easily extending
arguments on specific regions.
Example which adds '-b 0x10000' only for the COREBOOT CBFS region:
cbfs-files-y += file.bin
file.bin-COREBOOT-cbfstool-opts := -b 0x10000
Change-Id: Idfafb0205be42768adb04bb0a30fe46a9ca1bd57
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14640
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and
developer mode check functions to vboot. Thus, get rid of the
BOOTMODE_STRAPS option which controlled these functions under src/lib.
BUG=chrome-os-partner:55639
Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15868
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use
of verified boot library without having to stick to CHROMEOS.
BUG=chrome-os-partner:55639
Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15867
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system,
providing increased clarity about what it represents.
Since the submodule itself is called "vboot", it makes sense to use that
name in full instead of a very shortened (and confusing) version of it.
Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-on: https://review.coreboot.org/15824
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Allow bootblock to get access to the static device tree like
other early stages. device_romstage.c was renamed to
device_simple.c to better articulate the usage since it's not
just being used in romstage.
BUG=chrome-os-partner:55357
Change-Id: I3d63d2754c737cc738c09a3e3b3b468362fb78d1
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15837
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins)
Currently, on Intel Skylake the uCode binary is added to
CBFS based on the config option CBFS_EXTERNAL_HEADER. But
the entry is missing into the Firmware Interface Table, so
add it there.
BRANCH=none
BUG=chrome-os-partner:55403, chrome-os-partner:53077
TEST=built and verified FIT table has ucode entry.
Change-Id: I7dd7459ff7d2468f0aff66eb3ee9c2e3d7eda501
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/15783
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Currently there are two sources for the final size of the
flash image. One is defined as a Kconfig variable
(ROM_SIZE) and the other can be provided in a user defined
flashmap.fmd. This patch will enable the usage of CONFIG_ROM_SIZE
in flashmap.fmd to define the flash size. In this way, the
Kconfig variable is the only source of information for the
flash image size. This way is optional.
Change-Id: Id5298e06d360aaa6d94f2b5a2ffa65e45919853e
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/15219
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Build the <board>_checklist.html file which contains a checklist table
for each stage of coreboot. This processing builds a set of implemented
(done) routines which are marked green in the table. The remaining
required routines (work-to-do) are marked red in the table and the
optional routines are marked yellow in the table. The table heading
for each stage contains a completion percentage in terms of count of
routines (done .vs. required).
Add some Kconfig values:
* CREATE_BOARD_CHECKLIST - When selected creates the checklist file
* MAKE_CHECKLIST_PUBLIC - Copies the checklist file into the
Documenation directory
* CHECKLIST_DATA_FILE_LOCATION - Location of the checklist data files:
* <stage>_complete.dat - Lists all of the weak routines
* <stage>_optional.dat - Lists weak routines which may be optionally
implemented
TEST=Build with Galileo Gen2.
Change-Id: Ie056f8bb6d45ff7f3bc6390b5630b5063f54c527
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15011
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Add ifwitool to list of tools to be built so that it can be used by the
build system.
Change-Id: Ifcfbfd87ad9b7ba3ea11cfbcf40894f3e0dae694
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15013
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The previous code harded the suffix of splash file as
"jpg". Actually, SeaBIOS supports both jpg and bmp.
Change-Id: I06c4b14aae7f75be3406652a94612b5f30ce91c2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/14932
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On modern x86 platforms like apollolake, pre-RAM stages verstage and
romstage run within the cache-as-ram region. Thus, we do not need to
pass in the --xip parameter to cbfstool while adding these
stages. Introduce a new Kconfig variable NO_XIP_EARLY_STAGES which is
default false for all x86 platforms. Apollolake selects this option
since it supports code execution with CAR.
Change-Id: I2848046472f40f09ce7fc230c258b0389851b2ea
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/14623
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Previously, the XIP_ROM_SIZE Kconfig variable is used globally on
x86 platforms with the assumption that all chipsets utilize this
value. For the chipsets which do not use the variable it can lead
to unnecessary alignment constraints in cbfs for romstage. Therefore,
allow those chipsets a path to not be burdened by not passing
'-P $(XIP_ROM_SIZE)' to cbfstool when adding romstage.
Change-Id: Id8692df5ecec116a72b8e5886d86648ca959c78b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14625
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This fixes UPDATE_IMAGE builds, assuming that the fmap configuration in
the tree didn't change, at least as far as the CBFS regions are
concerned.
Another option would be to synthesize the fmap related files from the
existing image, but that comes with other issues (eg. what about
updating images old enough that there is no fmap?) and is more complex,
so keep it simple, stupid for now.
Change-Id: I036dab9f81f524f7d70bc0029b1ef835e6180a53
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14601
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Commit 785a31d67e
(Makefile.inc: Move payload code to payloads/) breaks the usage of
Linux kernel as payload. The reason for it is that cbfs-files-y is
evaluated before payloads/external/Makefile.inc is sourced and as a
consequence ADDITIONAL_PAYLOAD_CONFIG is empty when it is used for
payload options. That leads to missing command line and initrd for
the kernel which in turn leads to kernel panic when it boots.
To avoid it, move the code which adds payload to cbfs completely to
payloads/extranal/Makefile.inc. This way, ADDITIONAL_PAYLOAD_CONFIG is
set right before the payload itself is added to cbfs-files-y.
I have tested this patch with a Linux kernel as well as with SeaBIOS as
payload on mc_tcu3 and it works. If someone sees impact to other
payloads just let me know.
Change-Id: I7aad352f8b3fc1fdba1875b12648b07eba14e282
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/14579
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There's an in-tree fmap.h, and the file generated by fmaptool is likely
used in tandem with it. To avoid problems, rename the generated file
(which so far isn't used).
Change-Id: I95dfde513a7f78677cf18ecd7ce8745e40af316b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/14570
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reorder drivers to fit src/drivers/[X]/[Y]/ scheme to make
them pluggable.
Also, fix up the following driver subdirectories by switching
to the src/drivers/[X]/[Y]/ scheme as these are hard requirements
for the main change:
* drivers/intel
* drivers/pc80
* drivers/dec
Change-Id: I455d3089a317181d5b99bf658df759ec728a5f6b
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/14047
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Currently, the coreboot makefiles repeatedly run git to try to set
the KERNELVERSION variable and to fetch the submodules. This happens
three times for every build. By exporting a variable, we can catch
this on recursive makes and not run each of these steps again.
Change-Id: I85ab867b40e80c36bd94d48510ffe3252c6cf93f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This should help catch cases where the AML is not correct.
Change-Id: I48efb9ed0b62b3e17dcf3045ef9c32d813a412bc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14340
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We already have the ability to add a pxe rom to cbfs, but it needs to be
configured and built separately.
This moves the existing Kconfig options for PXE from device/Kconfig and
the top level Makefile.inc to payloads, and adds the option to download
and build iPXE as part of the coreboot build process.
This configures the serial output of iPXE to match coreboot's serial
port configuration by editing the .h files. iPXE doesn't give any
real build-time method of setting these configuration options.
Change-Id: I3d77b2c6845b7f5f644440f6910c3b4533a0d415
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14085
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Certain chipsets don't have a memory-mapped boot media
so their code execution for stages prior to DRAM initialization
is backed by SRAM or cache-as-ram. The postcar stage/phase
handles the cache-as-ram situation where in order to tear down
cache-as-ram one needs to be executing out of a backing
store that isn't transient. By current definition, cache-as-ram
is volatile and tearing it down leads to its contents disappearing.
Therefore provide a shim layer, postcar, that's loaded into
memory and executed which does 2 things:
1. Tears down cache-as-ram with a chipset helper function.
2. Loads and runs ramstage.
Because those 2 things are executed out of ram there's no issue
of the code's backing store while executing the code that
tears down cache-as-ram. The current implementation makes no
assumption regarding cacheability of the DRAM itself. If the
chipset code wishes to cache DRAM for loading of the postcar
stage/phase then it's also up to the chipset to handle any
coherency issues pertaining to cache-as-ram destruction.
Change-Id: Ia58efdadd0b48f20cfe7de2f49ab462306c3a19b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/14140
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add a few additional macros that can be used throughout the coreboot
makefiles.
tolower: returns the value in all lowercase
toupper: returns the value in all uppercase
ws_to_under: returns the value with any whitespace changed to underscores
Change-Id: Icd0e6586481d8f229af0e899e0c94ef7c5c672c3
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/14093
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to
statically allocate the different memory regions it needs and guarantees
at build time that there are no dangerous overlaps between them. At the
end of its (ramstage) execution, however, it usually loads a payload
(and possibly other platform-specific components) that is not integrated
into the coreboot build system and therefore cannot provide the same
overlap guarantees through memlayout.ld. This creates a dangerous memory
hazard where a new component could be loaded over memory areas that are
still in use by the code-loading ramstage and lead to arbitrary memory
corruption bugs.
This patch fills this gap in our build-time correctness guarantees by
adding the necessary checks as a new intermediate Makefile target on
route to assembling the final image. It will parse the memory footprint
information of the payload (and other platform-specific post-ramstage
components) from CBFS and compare it to a list of memory areas known to
be still in use during late ramstage, generating a build failure in case
of a possible hazard.
BUG=chrome-os-partner:48008
TEST=Built Oak while moving critical regions in the way of BL31 or the
payload, observing the desired build-time errors. Built Nyan, Jerry and
Falco without issues for good measure.
Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/13949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Builds with BUILD_TIMELESS=1 shall always give a bit identical output
for stable inputs. This should help verifying that resulting rom files
stay the same across commits that shouldn't change the outcome.
To be useful for builds that rely on 3rdparty/arm-trusted-firmware,
this needs a similar change there.
Change-Id: Ia0a22e3e79fbd0abbd2a9071ecbeef6541787a08
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/13412
Tested-by: build bot (Jenkins)
Reviewed-by: Damien Zammit <damien@zamaudio.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This dependency wasn't called out before, and when building with enough
threads, the build would fail due to a collision trying to build
build/util/kconfig/conf.
Fixes this failure:
make[1]: execvp: build/util/kconfig/conf: Permission denied
/home/martin/git/coreboot/util/kconfig/Makefile:40: recipe for target
'oldconfig' failed
make[1]: *** [oldconfig] Error 127
Makefile:167: recipe for target 'build/config.h' failed
Change-Id: Ib78d36bab0ba469796d89877bbe6a61e05196e87
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/13859
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Furquan Shaikh