Add new ram_id:0001 for memory part H9HCNNNCPMMLXR-NEE.
BUG=b:241494931
TEST=none
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Iee9f881d8ab21396d208a6af9f0cec8414cb50a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
R680E, Q670E, H610E are the ADL-S IoT variants
TEST=Boot ADL-S RVP DDR5 and see silicon info is reported
as PCH: AlderLake-S R680E
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I1804994b4b72f0484eabb15323736679d2668078
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This change provides access to IOE through P2SB Sideband interface for
Meteor Lake TCSS functions of pad configuration and Thunderbolt
authentication. There is a policy of locking the P2SB access at the end
of platform initialization. The tbt_authentication is read from IOM
register through IOE P2SB at early silicon initialization phase and its
usage is deferred to usb4 driver.
BUG=b:213574324
TEST=Built coreboot and validated booting to OS successfully on MTLRVP
board. No boot hung was observed.
Change-Id: Icd644c945bd293a8b9c4a364aaed99ec4a7c12f9
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66410
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Delete the Thunderbolt authentication function ioe_tcss_valid_tbt_auth
from the common block. Meteor Lake Platform will implement it.
BUG=b:213574324
TEST=Built coreboot image successfully.
Change-Id: I97a289faa6351fe562f91d8478b72c9403ce88cb
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
DDR5 memory modules have two separate 32-bit channels (40-bit on ECC
memory modules), and the SPD info refers to one channel: the primary
bus width is 32 (or 40) bits and the "DIMM size" is halved. On Alder
Lake, there are 2 memory controllers with 4 32-bit channels each for
DDR5. FSP has 16 positions to store SPD data, some of which are only
used with LPDDR4/LPDDR5.
To try to make things less confusing, FSP abstracts the DDR5 channels
so that the configuration works like on DDR4. This is done by copying
each DIMM's SPD data to the other half-channel. Thus, fix the wrapper
parameters for DDR5 accordingly.
Tested on AlderLake-P DDR5 RVP (board ID 0x12), both DIMM slots now
function properly. Without this patch, only the top slot would work.
Change-Id: I5f01cd77388b89ba34d91c2dc5fb843fe9db9826
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66608
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Use the actual model name for the variant dir.
Change-Id: I199b8efb5c3cddb8943ba4b761546caa11c67a30
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Consolidate MAX_BIOS_ENTRIES and MAX_PSP_ENTRIES definitions into one
file
Signed-off-by: Altamshali Hirani <al.hirani@amd.corp-partner.google.com>
Change-Id: Ie3c64a1875010e7fb368967283df6baf1cc7ba8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62911
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
'Mendocino' was an embargoed name and could previously not be used.
Update amdfwtool for consistency with the correct naming convention.
BUG=b:239072117
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I404fcf59e89b75cd2488bcb51981aee2eb4ff0df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66468
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch backported from commit ba2e51bd49 (mb/google/brya: brya0:
Add ACPI support for Type-C ports) for google/rex.
BUG=b:224325352
TEST=Able to build Google/Rex and boot on MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: If0a9510784e8f62861ae4bc74805b1513a4865cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66538
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
This patch describes the USB2/3 ports in devicetree to generate ACPI
code at runtime. The ACPI code includes the port definition, location,
type information.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7d787a9986099852d6a0d193bbc28487bf430fe4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66542
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch describes the TCSS USB ports in devicetree to generate ACPI
code at runtime. The ACPI code includes the port definition, location,
type information.
BUG=b:224325352
TEST=Able to build and boot MTLRVP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I08613b31aad47cbf573ed1b5fc68c91cf973e190
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66540
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
From Meteorlake, IGD BAR0(GTTMMADR) is changed to 64bit prefetchable.
Due to the prefetchable attribute, resource allocation for IGD BAR0 is
assigned WC memory and it causes kernel driver failure.
For avoiding kernel driver failure, ignore prefetch PCI attribute
for IGD BAR0 to assign UC memory.
We're working on publishing below information.
- IGD BAR0(GTTMMADR) is changed to 64bit prefetchable BAR
- GTTMMADDR BAR should be always mapped as UC memory although
marked Pre-fetchable.
BUG=b:241746156
TEST=boot to OS and check guc driver loading successful
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I76d816d51f32f99c5ebcca54f13ec6d4ba77bba5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66403
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
'Mendocino' was an embargoed name and could previously not be used.
Update amdfwtool for consistency with the correct naming convention.
BUG=b:239072117
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I673a9b99d207603b605756fc7d277c54c5d0f311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66467
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
'Mendocino' was an embargoed name and could previously not be used
in references to Skyrim. coreboot has references to sabrina both
in directory structure and in files. This will make life difficult
for people looking for Mendocino support in the long term. The code
name should be replaced with "mendocino".
BUG=b:239072117
TEST=Builds
Cq-Depend: chromium:3764023
Cq-Depend: chromium:3763392
Cq-Depend: chrome-internal:4876777
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
This adds SPDX identifiers to the remaining source files in the
lib directory that don't already have them.
A note on gcov-iov.h - As machine generated content, this file is
believed to be uncopyrightable, and therefore in the public domain, so
gets the CC-PDDC license even though there is code in the file.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ifcb584d78a55e56c1b5c02d424a7e950a7f115dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This adds SPDX identifiers to the remaining source files in the
include directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I0dbf4c839eacf957eb6f272aa8bfa1eeedc0886f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66501
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds SPDX identifiers to the remaining source files in the
southbridge directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: If74aa82a7c40293198e07e81ceac52bd8ca8ad27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66500
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds SPDX identifiers to the remaining source files in the
drivers directory that don't already have them.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I97f96de857515214069c3b77f3c781f7f0555c6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66499
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds SPDX identifiers to the remaining source files in the
mainboard directory that don't already have them.
Change-Id: I1adc204624f3ab6fcafd8fbb239e6d69e057973a
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66498
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Add WiFi SAR table for joxer.
BUG=b:239788985
TEST=build FW and checked SAR table can load by WiFi driver.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ia8dddf454e441840233fa4405704ee1f0a8ed86c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66522
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The Creative Commons Public Domain Dedication and Certification is not
a license in the common sense in that it's stating that the associated
file is already in the public domain (having no copyright), and is not
actually putting it in the public domain like the CC-C0 license does.
The use for this in coreboot is for unlicensable files - either blank
files or files with no creative content. This allows these files to
have the SPDX identifier to identify them as having no known copyright
for open source license compliance.
If CC-PDM-1.0 is ever included in the list of SPDX licenses, that would
probably fit better, but because the public domain mark isn't actually
a license, and because "public domain" isn't well defined, CC-PDM was
rejected as a SPDX identifier.
For further information:
https://web.archive.org/web/20201018194411/https://github.com/spdx/license-list-XML/issues/988
Change-Id: Ibb300ecd066cde2a016195c2beca76a460c588e3
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66496
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The gcov files in the lib directory are licensed GPL 3.0 with the GCC
runtime library exception.
Add this as a valid license so that the files can get a correct SPDX
identifier.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I1cf9c3125592741923c9b4481038055f24fe6ab1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66495
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
These licenses and exceptions are allowed by coreboot's license checker,
but the copies of the licenses were missing from the LICENSES directory.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ic4233e556de08275fe50f1ec83828f9470b4b566
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66494
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The EC used on zork uses a level high interrupt. This change configures
the polarity correctly.
The eSPI config is baked into RO verstage. The zork ToT build doesn't
use signed verstage since it's incompatible with the ToT version of
vboot. This means we can safely switch the keyboard IRQ polarity.
NOTE: Do not cherry pick this into the Zork firmware branch!
BUG=b:160595155
TEST=On morphius verify keyboard works as correctly and no spurious
interrupts are thrown on S0i3 resume. Also verified keyboard and mouse
work correctly in windows.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8d3195522f3bd5e477635494c7156683aae0ff0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
The default state for the IRQ lines when the eSPI controller comes out
of reset is high. This is because the IRQ lines are shared with the
other IRQ sources using AND gates. This means that in order to not cause
any spurious interrupts or miss any interrupts, the IO-APIC must use a
low polarity trigger.
On zork/guybrush/skyrim the eSPI IRQs are currently working as follows:
* On power on/resume the eSPI controller drives IRQ 1 high.
* eSPI controller gets configured to not invert IRQ 1.
* OS configures IO-APIC IRQ 1 as Edge/High.
* EC writes to HIKDO (Keyboard Data Out) which causes the EC to set IRQ1
high.
* eSPI controller receives IRQ 1 high, doesn't invert it, and leaves IRQ
1 as high. This results in missing the first interrupt.
* When the x86 reads from HIKDO, the EC deasserts IRQ1. This causes the
eSPI controller to set IRQ1 to low. We are now primed to catch the
next edge high interrupt. This is generally not a problem since the
linux driver will probe the 8042 with interrupts off.
On S3/S0i3 resume since the eSPI controller comes out of reset driving
the IRQ lines high, we trigger a spurious IRQ since the IO-APIC is
configured to trigger on edge high. This results in the 8042 controller
getting incorrectly marked as a wake trigger.
By configuring the IO-APIC to use low polarity interrupts, we no longer
lose the first interrupt. This also means we can use a level interrupt
to match what the EC actually asserts.
We use the `Interrupt` keyword instead of the `IRQ` keyword in the ACPI
because the linux kernel will ignore the level/polarity parameters
for the `IRQ` keyword and default to `edge/high. `Interrupt` doesn't
have this problem.
The PIC is not currently configured anywhere and it defaults to an
edge/high trigger. We could add some code to configure the PICs trigger
register, but I don't think we need the functionality right now.
For zork and guybrush, this change is a no-op. eSPI is configured in
verstage which is located in RO, and we have already locked RO for
these devices. We will need to figure out how to properly set the
`vw_irq_polarity` for these devices.
BUG=b:218874489, b:160595155, b:184752352, b:157984427, b:238818104
TEST=On zork, guybrush and skyrim
$ suspend_stress_test --post_resume_command 'cat /sys/devices/platform/i8042/serio0/wakeup/wakeup35/active_count'
Verify keyboard works as expected and no interrupt storms are observed.
On morphius I verified keyboard and mouse work on windows as well.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4608a7684e34ebb389e0e55ceba7e7441939afe7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Pujjo support WWAN device, enable USB3.0 port 3 for WWAN device
BUG=b:241322361
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: Iafe2ea18663794138e0a27879fc108d23eb81456
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
This script creates a patch to remove all of the coreboot code that a
platform doesn't use. This is useful for auditing the codebase for an
individual platform or releasing a platform's code.
Unlike the script that Sage used that did something similar, this keeps
the entire Kconfig tree (Though in a single file), all makefiles that
are required to build, and the standard build tools can still be used.
This will allow for much easier re-integration back into the coreboot
codebase if code is released after running this.
This is just the initial version and more features needed to be added to
make it fully functional.
- It should be able to build multiple configurations to retain the code
for all of those configurations.
- Flag to remove submodules files as well
- Additional variable flags to replace hardcoded values.
- The list of makefiles that need to be kept is pretty long, and could
be updated so that they aren't needed by the top level makefiles.
- Add flag to show changed files
- Show number of files before and after script is run
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iec69db2ad1358846d649db627b6d60ac8c2204e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This update follows suggestions from Martin Roth about the contents of
the comment.
Change-Id: Ic296bcd6a0fb250426f5d75aac69a3fa0f2aaf32
Signed-off-by: Kevin Chowski <chowski@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
On boards which use both PSP recovery A/B layout as well as VBOOT A/B
layout, ISH_B directory entry is pointing directly to PSP Level2
directory. This is not correct and either ISH_B should be marked as not
present or it should point to the ISH_A directory itself which in turn
point to PSP L2 directory. Fix it by choosing the latter option.
BUG=None
TEST=Build and boot to OS in Skyrim with PSP verstage.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I0a7a56e98de3f85669ff8ec2fcd1687aa33576a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Change the SPL file from the 'cezanne' placeholder to a mendocino
filename. Also, move the default location to blobs/mainboard since
it's not board-agnostic.
BUG=b:241543152
BUILD=Enable feature and build amd/chausie
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I47647c5d926484e25e3f893e72c671554e277a56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Change the name of the whitelist file from the 'cezanne' placeholder
to a mendocino path/to/file. Also, as whitelist files won't be pushed
into a public repo, modify the path to point to site-local.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I49bbf1335606567735e36ed9bda1314bfc6247d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Modify sabrina's fw.cfg to point to the proper directory and use the
standard names, as released by AMD.
The name 'sabrina' was an alias used for the Mendocino product. The
public-facing builds have been using Cezanne blobs, renamed as Sabrina
or SBR, but can now take advantage of the appropriate blobs.
BUG=b:239072117
TEST=Build amd/chausie
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Id646844e41980802be1e39dce96e5adaace4311d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This picks up the following changes
83c44ad mendocino: Add additional SPI configs
5141d91 mendocino: Add all blobs from PI 1.0.0.1
3b29a7d cezanne: Upgrade microcode patch to 00A50F00h
BUG=239072117
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I1060dc7bec8f436dccf270bc3abde75cb09bb591
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Move GPIO init for SSD_AUX_RESET_L to ensure that eMMC devices
will be initialized in time for the nominal boot flow.
BUG=b:237701972
TEST=Boots to OS
BRANCH=none
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I610966fd9d31581f15d8bcd51f8a116c27fd6311
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66461
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This gets the display working.
BUG=b:240884260
BRANCH=firmware-brya-14505.B
TEST=display works in both depthcharge and linux
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I03edac865d68ef48e86d47a04f27ed84894f2f7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66395
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Set the watchdog timeout to 0 in ite_kill_watchdog, as in some ITE
models it is set to non-zero by default, activating the watchdog despite
us setting the control register to 0.
Based on:
- "ITE IT8786E-I Preliminary Specification V0.4.1 (For D Version)"
- Linux it87_wdt driver
Change-Id: I1e78e2acc96e9dd0f283c5c674d3277d26cdee26
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Make the default Microchip EC firmware path/to/file values overridable
by adding prompts to the strings.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I300f78a11960dbe193165fcb379b7190e3de4545
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Looking into pciexp_get_ext_cap_offset() it seems a little hackish
and prone to endless loops. Either it should limit the loop or bail
out when pci_read_config32() returns 0xffffffff, meaning "Unsupported
Requests".
This commit fixes an endless loop when the queried PCIe device is
downstream of a legacy PCI bus which doesn't support extended config
space, thus pci_read_config32() will return 0xffffffff, for example,
the combination below with CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS
enabled.
TEST=Build and boot to OS in ASUS P8C WS with the following
peripherals and CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS enabled:
00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series
Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4)
00:1c.4/00.0 SATA controller [0106]: Marvell Technology Group Ltd.
88SE9170 PCIe 2.0 x1 2-port SATA 6 Gb/s Controller [1b4b:9170]
(rev 13)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a4)
00:1e.0/00.0 PCI bridge [0604]: PLX Technology, Inc. PEX 8111 PCI
Express-to-PCI Bridge [10b5:8111] (rev 21)
00:1e.0/03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc.
VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
(rev c0)
00:1e.0/00.0/00.0 Network controller [0280]: Qualcomm Atheros AR93xx
Wireless Network Adapter [168c:0030] (rev 01)
with 00:1c.4/00.0 being successfully tuned with pciexp_tune_dev(), and
00: 1e.0/00.0/00.0 not tuned as expected.
Change-Id: Ibb92548c47288b40e851fcc0a8a37937e8bdbf3c
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66439
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
John Su