CNL PCH has PWR_FLR, SUS_PWR_FLR and HOST_RST_STS bits in GEN_PMCON_A
and so this change updates the check for these bits to use GEN_PMCON_A
instead of GEN_PMCON_B.
BUG=b:128482282
TEST=Verified that prev_sleep_state is reported correctly when booting
from S5.
Change-Id: I75780a004ded8f282ffb3feb0cdc76233ebfd4f2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31908
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To ensure the power button functions as expected in firmware ensure
that the EC is not in "S0ix supported OS" mode and expecting the
power button to be handled by the virtual button interface.
BUG=b:128409889
TEST=Verify that the power button works at the developer screen
when the system is rebooted from within Chrome OS. Also ensure
that it works when external warm reset signal is asserted by H1.
Change-Id: Ic323515e3b8be08bac4f0f82e25f2f78c2f22833
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Symbols prefixed with vb2_ should be reserved for internal
vboot library use.
Anything outside of that may choose some other prefix.
Here, we choose vboot_ instead.
Also, add some documentation to security/vboot/misc.h,
which provides headers for a number of different C files.
BUG=b:124141368
TEST=Build and deploy to eve
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I5d9154fd2d5df25ee254bd5ce4a173afaa6588be
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31886
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Values from
- Intel doc 337347 rev4
- coreboot soc/intel/cannonlake/include/soc/gpio_soc_defs_cnp_h.h
On Coffeelake H (using Cannonlake / Cannonpoint PCH) p2sb is not
accessible. Using a static value instead. 0xfd000000 is a common value
chosen by coreboot and non-coreboot firmware.
Change-Id: Id637f703ab0a99eb0908ecdc3da27ba80db1c6b8
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
A side effect of the change 8e0dca05
"util/amdfwtool: Add generic image copy function"
was to treat a read operation of zero bytes as a failure. Some
implementations exist that use zero length files as a means of
removing functionality. This causes amdfwtool to exit with an
error.
Put the zero length capability back in, and generate the requested
table entry with a length field of 0x0.
TEST=Boot google/grunt, inspect PSP directory table
BUG=b:128507639
Change-Id: Ifc9204dbbf6b107f06116362358ab9d22caa71df
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31891
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
LM96000 is the successor of the famous LM85.
Change-Id: Ie7df3107bffb7f8e45e71c4c1fbe4eb0a9e3cd03
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/21194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Just another hardware-monitoring chip. Only limited fan control and PECI
configuration is implemented.
Change-Id: I35ea79e12941804e398c6304a08170a776f4ca76
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In case PCI_IO_CFG_EXT=n parameter 'reg' was not
properly truncated to 8 bits and it would overflow
to dev.fn part of the register.
A similar thing could happen with 'dev' but that
value originates from PCI_DEV() macro unlike 'reg'.
Change-Id: Id2888e07fc0f2b182b4633a747c1786e5c560678
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31847
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Accoriding to 574354, we need to tune each port to pass eye diagram
other than just use recommanded setting as they are base guidence only.
Bug=b:124407280
TEST=Build and boot up on arcada board.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I587695809b368edd33852c4241de097ca31e9d66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31632
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For platforms that do not employ VBOOT_STARTS_IN_ROMSTAGE,
vboot verification occurs before CBMEM is brought online.
In order to make vboot data structures available downstream,
copy vb2_working_data from CAR/SRAM into CBMEM when CBMEM
comes online. Create VBOOT_MIGRATE_WORKING_DATA config
option to toggle this functionality.
BUG=b:124141368, b:124192753
TEST=Built and deployed on eve with STARTS_IN_BOOTBLOCK
TEST=Built and deployed on eve with STARTS_IN_ROMSTAGE
TEST=util/lint/checkpatch.pl -g origin/master..HEAD
TEST=util/abuild/abuild -B -e -y -c 50 -p none -x
BRANCH=none
Change-Id: I62c11268a83927bc00ae9bd93b1b31363b38e8cf
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Updating from commit id 1e177741:
2019-02-14 05:27:16 -0800 - (vboot: rename VB2_DISABLE_DEVELOPER_MODE)
to commit id 304aa429:
2019-03-12 10:38:56 -0700 - (futility: updater: Unit test for preserving sections using FMAP flags)
This brings in 18 new commits.
Change-Id: Ie2889ed0217c38734eb2c496ca20f95b6a12b102
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31872
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
By design only 'reg' parameter can have the two least-
significant bits set. As 'reg' is often a constant,
'0xCFC + (reg & 3)' resolves to an immediate value
already at buildtime, unlike (addr & 3) which depends
of a constant (but non-immediate) value of 'dev' in
ramstage.
Change-Id: I6e729fe800c92b1ce4994ad2b4203072fa75a958
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31754
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The copyright notices of Eltan B.V. have been removed by mistake before
sending the patch with board support. Revert back to be consent with the
license.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic5948ab60a661ef78e4e5c8571535a096fc88ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31842
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
From doc#573387 CML System Memory DQ DQS Rcomp Mapping Information
User Guide, RCompResistor[0] should be 121.
BUG=b:122959294
BRANCH=None
TEST=emerge coreboot and make sure boots up
Change-Id: If69e7fb41e79d88d21b0e50fb65107a1686d696a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31868
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
MEM_CH_SEL is used to indicate whether we are on a single or dual
channel device, where MEM_CH_SEL = 1 for single channel skus and
MEM_CH_SEL = 0 for dual channel skus. Initialize single_channel field
(from GPP_F2), which will in turn initialize MemorySpdPtr pointers in
cannonlake soc code. In the first build, we did not use GPP_F2, so we
need to add an internal pulldown as those early devices were all dual
channel devices.
BUG=b:123062346, b:122959294
BRANCH=None
TEST=Boot into current boards and ensure that we have 2 channels as expected
Also, verify that GPP_F2 is set to 0.
Change-Id: I89d022793580be603a93d0b177d73ce968529b5c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The board version is part of EC's EEPROM, select Kconfig items to enable
requesting the EC for board version.
BUG=b:128385395
TEST=Verified the mainboard version is from EC's EEPROM.
Change-Id: I4bc1cac43c6cf73522f3a4bee89cc000a430d996
Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31858
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This symbol was removed in
a6be58fece ("nb/intel/sandybridge: Remove the C native graphic init")
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I87801552e1c37162897949ec0db3904f850f0bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Port commit f1395d82: "ec/lenovo/h8: Add USB Always On" to the Thinkpad
x1_carbon_gen1 board as well, as it seems to work fine on all
generations.
See also commit 7ffb329f with Change-Id
I6dcbfaae2a444d9a679ecb64a87dc2a59b8fd281 ("mb/lenovo/*/cmos: Port USB
Always On").
Note that we don't need to call h8_usb_always_on() directly since commit
4f4322dd with Change-Id If812cd1ef8fb1a24d7fadbe834f574b40cbcd56a
("lenovo/h8,thinkpads: Re-do USB Always On").
Change-Id: Ib9070b659b0c9ad5dde4200ec2845c6fa2b78b25
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29032
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicola Corna <nicola@corna.info>
Like with any other Thinkpad, call MUTE(1) and USBP(0) on _PTS on the
Lenovo Thinkpad X1 Carbon 1st generation.
Without MUTE(1) the speakers sometimes glitch before going into S3 (if not
muted), while without USBP(0) the USB ports are always powered in S3,
regardless of the USB Always-On mode selected.
Change-Id: I86f3c5a72e2589c5570303bf68f39df3ef874cb8
Signed-off-by: Nicola Corna <nicola@corna.info>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Before start sorting check for the number of entries in the data set. If
there are less than two entries, sorting makes no sense.
Change-Id: Ib9d5522cdebb6559a025217f7faf318589d55a2c
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Sorting makes only sense if there are at least two entries available.
Change-Id: If40638bf1fe24dcff4b7839967445fb4218184f8
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This change reads DRAM part number from EEPROM if available and
returns it using the SoC callback (mainboard_get_dram_part_number).
BUG=b:127609572
TEST=Verify that DRAM part number from EEPROM is added to DMI table
17 (dmidecode -t 17).
Change-Id: I6ade6999828b6d67aa78d04199138f195a97ba8c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
In order to support mainboards that do not store DRAM part number in
the traditional way i.e. within the CBFS SPD for soldered memory, this
change provides a runtime callback to allow mainboards to provide DRAM
part number from a custom location e.g. external EEPROM on hatch.
For other boards it should be a NOP since the weak implementation of
mainboard_get_dram_part_num does nothing.
BUG=b:127609572
Change-Id: I9b2d4c33fc378b9a24b111971ec2bfdb5f8d57d0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31850
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The root port IDs on bd82x6x.go were for both the PCH and the CPU PCIe
root ports. Put the latter on sandybridge.go instead, and add missing
IDs.
Change-Id: I04b5220c460f1930accd64b63c11f512581f2c6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30962
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
One could understand 'where' as bus, device, function
or register. Make it clear it is register.
Change-Id: I95d0330ba40510e48be70ca1d8f58aca66c8f695
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Furquan Shaikh