Remove the PSE TSN GbE device #0 as it's unused on the board and not
visible during the PCI enumeration.
Change-Id: I4a7d0e437c4f4a12d3a07564cddeafb7c697c6d3
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70700
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Contrary to mc_ehl2, which this variant is based on, this board
doesn't contain the TI XIO2001 PCIe-to-PCI bridge, which makes the
attempts to modify the bridge's registers unnecessary.
Change-Id: I6597ceb78e4c790c08a0dfa9535dece33a8f95b8
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70854
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both the tegra builds and the gitconfig tests are causing issues.
They're disabled until someone fixes them.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1ed272e3579a2e7cdd6b58df24e719410d47082c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Switch from using ACPI "probed" flag to "detect" flag for all i2c
touchscreens and digitizers. This removes non-present devices from the
SSDT and relieves the OS of the burden of probing.
Test: build/boot Windows/Linux on various octopus variants, verify
touchscreens/digitizers functional, dump ACPI tables and verify only i2c
devices actually present on the board have entries in the SSDT.
Change-Id: I67c5bbae42e96ae21d37309e382b635321e6ef01
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63214
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GPIOs themselves are configured as level triggered, and the drivers
(both Linux and Windows) work better with LEVEL vs EDGE triggering.
TEST=tested with rest of patch train
Change-Id: I13bc6920a0dfaf769091b1764a7584902d1f85d6
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63213
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For octopus variants with a touchscreen/digitizer, drive the enable and
reset GPIOs high in romstage, then disable the reset GPIOs in ramstage.
Where available, only set the GPIOs for SKUs which have a touchscreen.
This will allow coreboot to detect the presence of i2c touchscreens
during ACPI SSDT generation (implemented in a subsequent commit).
TEST=tested with rest of patch train
Change-Id: Ia725b4054069c0a4f60afd7e0bca6e2fd5fdcbba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63212
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add method variant_romstage_gpio_table() with empty weak implementation
to allow variants to override as needed for touchscreen power
sequencing (to be implemented in a subsequent commit). Call method
in romstage to program any GPIOs the variant may need to set.
TEST=tested with rest of patch train
Change-Id: I4a8e11945ae64b000051989089e0ebae22896c6b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70905
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add support to report previous PSP boot failure to verified boot. This
is required specifically on mainboards where the signed AMDFW blobs are
excluded from vboot verification.
BUG=b:242825052
TEST=Build Skyrim BIOS image and boot to OS in Skyrim. Corrupt either
one of SIGNED_AMDFW_A/B sections or both the sections to ensure that the
appropriate FW slot is chosen.
Cq-Depend: chromium:4064425
Change-Id: Iada0ec7c373db75765ba42cb531b16c2236b6cc3
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70382
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add an SVC command to get the previous boot status. If there is any
pre-x86 boot failure in the previous boot cycle, PSP stores it in warm
reset persistent register and triggers a warm reset. PSP verstage on the
subsequent boot gets the previous boot status and reports any failure to
the vboot before a FW slot is selected.
BUG=b:242825052
TEST=Build Skyrim BIOS image and boot to OS in Skyrim. Trigger a failure
scenario by corrupting certain firmware blobs and observe that PSP
reports the failure boot status. On a normal boot, observed that PSP
reports successful boot.
Change-Id: I440deee560b72c80491bfdd7fda38a1c3a4299e5
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70381
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables building ChromeOS for mtlrvp.
Patch includes,
1. Add cros_gpios for mtlrvp
2. Add chrome OS configuration in Kconfig
3. Add Chromeos.c
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train (CB: 69886)
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ia428941bd8269714c3edca6c7b0c2a3fbf08bd75
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70724
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch rewrites `if` condition by connecting two different conditions
using the logical and(&&) operator without changing the semantics to
improve the code readability.
TEST=Build the code for Rex
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I8c912f694d801768b1553f33de78f01215be7f0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70479
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com>
This patch drops unused `dptf.asl` from the latest IA SoC platforms
as DPTF ACPI code generation is now relies on runtime aka SSDT
rather than having fixed dptf.asl files to include inside the
mainboard dsdt.asl.
TEST=Able to build Google/Kano without any compilation issue.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I30a53eace89bf5324d7c2f15c6c2d2218f90eaf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71087
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Power resource for Bluetooth device is not configured correctly in the
device tree. Fix Bluetooth devicetree configuration.
BUG=b:262785310
TEST=Build Skyrim BIOS image and boot to OS. Ensure that the DUT is able
to connect to a Bluetooth headset.
Change-Id: Id980424349537be35860dec04cc823d419cefe2f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71068
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
add dptc support for different power parameter on tablet/clamshell
mode.
BUG=b:257187831
BRANCH=none
TEST=validate the parameter change for each mode by AGT.
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I96e04d113d18b42f3457056a5e4fa311ceccffb3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
1.Config setting for touchpad I2C
BUG=b:261159229
TEST=On frostflow, touchpad i2c spec from EE measure
Frequencies:
1.I2C0 (Touchpad): 385.7kHz
Change-Id: I4ca72ee7fabd4b641eb17451ed8d942c5df52dde
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
smm_relocation_handler is run for each thread but IA32_SMRR_PHYS_BASE
and IA32_SMRR_PHYS_MASK are core scope, need to avoid writing the
same MSR that has been locked by another thread.
Tested=On OCP Crater Lake, rdmsr -a 0x1f3 can see all cores set the lock
bit.
Change-Id: I9cf5a6761c9a9e1578c6132ef83e288540d41176
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
While the fall through comment is sufficient for gcc to notice that the
fall-through is intentional, clang requires a special attribute which
also works for gcc. Update the documentation to use this attribute
instead of the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I08dbac8ff1f9e04770a03fb74fabf0d397b50989
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71102
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch adds files required for ramstage and SMM.
1. Add file required for ramstage (mainboard.c)
2. Add smihandler.c for SMM
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with the
subsequent patches in the train
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I377c4ff954a900c7b5193d7cab5554c6c02573ee
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70723
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch will initialize EC for mtlrvp which includes,
1. Add configuration (& choice) for CHROME_EC and INTEL_EC (WINDOWS_EC)
2. Add respective ACPI configuration
3. Add ec.c required for ramstage
4. Program EC ranges as part of devicetree.cb
5. Enable VBOOT in Kconfig
BUG=b:224325352
TEST=Able to build with the patch and boot the mtlrvp platform with
CHROME_EC using subsequent patches in the train
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: I662d7f79050d35e152d97dc5c2118a4af56223bc
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66101
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As _Static_assert() is a compiler built-in, <assert.h> is not needed.
Change-Id: I578b4bf286538d0606569d19ec760a1846c8145b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Updating from commit id 2047412:
2022-11-29 17:52:03 +0800 - (Elkhart Lake MR5 FSP)
to commit id 6f2f17f:
2022-12-14 12:36:46 -0700 - (Deleted old Release Notes and Integration Guides)
This brings in 6 new commits:
6f2f17f Deleted old Release Notes and Integration Guides
3868f73 Updated for SGXFlex - New UPDs available
a649f0f Whitley FSP 2.2.0.3A
f99be62 Merge branch 'master' of https://github.com/intel/FSP
1787bc7 Updated IoT ADL-PS MR1 (3404_00) FSP
1e833b0 Elkhart Lake MR5 FSP
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I1dbd85ef06b057305428d42dd6cd6de0f2618439
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Updating from commit id e8efa5d:
2022-05-30 15:47:07 +0530 - (sc7180/boot: Update qclib blobs binaries from 44 to 46)
to commit id 33cc4f2:
2022-10-26 14:21:20 +0530 - (sc7280/qtiseclib: Update qtiseclib blobs binaries and release notes from 63 to 69)
This brings in 10 new commits:
33cc4f2 sc7280/qtiseclib: Update qtiseclib blobs binaries and release notes from 63 to 69
6c82214 sc7180/boot: Update qclib blobs binaries from 48 to 50
e570e02 Reland "sc7280/cpucp: Update cpucp blobs binaries and release notes version from 060 to 063"
6206ab8 Revert "sc7280/cpucp: Update cpucp blobs binaries and release notes version from 060 to 063"
82bbf78 sc7280/aop: Update aop blobs binaries and release notes version from 379 to 410
e3a760d sc7180/boot: Update qclib blobs binaries from 46 to 48
741abaa sc7280/boot/shrm: Update qclib blobs binaries from 30 to 35
436cb87 sc7280/cpucp: Update cpucp blobs binaries and release notes version from 060 to 063
3f44ba0 sc7180/qtiseclib: Update qtiseclib blobs binaries and release notes update from 044 to 050
eef51c6 sc7280/qcsec: Update qcsec blobs binaries and release notes for 27
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I72b91e384b74e4e44864ef5f29be78ebac4262fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
This patch fixes a hidden issue present inside FSP-S while coreboot
decides to skip performing MP initialization by overriding FSP-S UPDs
as below:
1. CpuMpPpi ------> Passing `NULL` as coreboot assume FSP don't need
to use coreboot wrapper for performing any
operation over APs.
2. SkipMpInit -----> Set `1` to let FSP know that coreboot decided
to skip FSP running CPU feature programming.
Unfortunately, the assumption of coreboot is not aligned with FSP when
it comes to the behaviour of `CpuMpPpi` UPD. FSP assumes ownership of
the APs (Application Processors) upon passing `NULL` pointer to the
`CpuMpPpi` FSP-S UPD.
FSP-S creates its own infrastructure code after seeing the CpuMpPpi
UPD is set to `NULL`. FSP requires the CpuMpPei module, file name
`UefiCpuPkg/CpuMpPei/CpuMpPei.c`, function name `InitializeCpuMpWorker`
to perform those additional initialization which is not relevant for
the coreboot upon selecting the SkipMpInit UPD to 1 (a.k.a avoid
running CPU feature programming on APs).
Additionally, FSP-S binary size has increased by ~30KB (irrespective of
being compressed) with the inclusion of the CpuMpPei module, which is
eventually not meaningful for coreboot.
Hence, this patch selects `MP_SERVICES_PPI_V2_NOOP` config
unconditionally to ensure pass a valid pointer to the `CpuMpPpi` UPD
and avoid APs getting hijacked by FSP while coreboot decides to set
SkipMpInit UPD.
Ideally, FSP should have avoided all AP related operations when
coreboot requested FSP to skip MP init by overriding required UPDs.
TEST=Able to drop CpuMpPei Module from FSP and boot to Chrome OS on
Google/Redrix, Kano, Taeko devices with SkipMpInit=1.
Without this patch:
Here is the CPU AP logs coming from the EDK2 (open-source)
[UefiCpuPkg/CpuMpPei/CpuMpPei.c] when coreboot sets `NULL` to the
CpuMpPpi UPD.
[SPEW ] Loading PEIM EDADEB9D-DDBA-48BD-9D22-C1C169C8C5C6
[SPEW ] Loading PEIM at 0x00076F9A000 EntryPoint=0x00076FA24E2
CpuMpPei.efi PROGRESS CODE: V03020002 I0
[SPEW ] Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE
[SPEW ] Notify: PPI Guid: F894643D-C449-42D1-8EA8-85BDD8C65BDE,
Peim notify entry point: 76FA0239
AP Loop Mode is 2
GetMicrocodePatchInfoFromHob: Microcode patch cache HOB is not found.
CPU[0000]: Microcode revision = 00000000, expected = 00000000
[SPEW ] Register PPI Notify: 8F9D4825-797D-48FC-8471-845025792EF6
Does not find any stored CPU BIST information from PPI!
APICID - 0x00000000, BIST - 0x00000000
[SPEW ] Install PPI: 9E9F374B-8F16-4230-9824-5846EE766A97
[SPEW ] Install PPI: 5CB9CB3D-31A4-480C-9498-29D269BACFBA
[SPEW ] Install PPI: EE16160A-E8BE-47A6-820A-C6900DB0250A
PROGRESS CODE: V03020003 I0
With this patch:
No instance of `CpuMpPei` has been found in the AP UART log with FSP
debug enabled.
This patch is backported from
commit 8409f156d5 (soc/intel/alderlake:
Remove dependency of FSP-S CpuMpPei Module)
Change-Id: I7d9fb37ca1cd4bf325edc951ee7293e459fa2ea4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70600
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
The details about how the CPU multiprocessor init (MP) has migrated
from coreboot to FSP can be found in
https://doc.coreboot.org/soc/intel/mp_init/mp_init.html.
The major reason behind this migration is to support the Intel
proprietary and restricted CPU feature programming which can't be
performed if coreboot sets the BIOS_DONE or BIOS Reset CPL as part
of coreboot MP Init flow (prior to calling FSP-S). Hence, the new
flow introduced with Tiger Lake platform forced having monolithic
MP Init peformed by FSP (using coreboot MP PPI wrapper code).
The last 3-4 years of FSP doing MP Init has demonstrated ample
issues during platform bringup which is specific to UEFI MP Service
implementation and not relevant to open source coreboot. This new
flow makes the debug and validation aspect complicated where
any FSP MP Init code changes should have been validated with coreboot
MP PPI wrapper else might cause some failure, unfortunately,
the validation commitment has never been met, hence, issue debugging
is the only solution that remains in practice.
Most importantly, the restricted feature programming which demanded
closed source MP Init (for features like SGX and C6DRAM) has never
been enabled in coreboot (starting with Alder Lake, the SGX feature
has been dropped).
This patch attempts to decouple FSP-S doing MP Init from the rest
of the FSP-S silicon init and introduces 2nd MultiPhase SI init
which allows bootloader to perform the mandatory SoC programming
before FSP-S has done with PM programming (a.k.a set the reset CPL).
The core/uncore BWG suggests the minimum SoC programming before
BIOS Reset CPL is set. coreboot uses the MultiPhaseSI Init Index 2
to perform the required CPU programming before enabling the BIOS
Reset CPL.
This implementation would allow us to get rid of FSP running CPU
feature programming and additionally make several EDK2 MP service
modules optional (those are packed to create FSP-S blob).
In summary, this change would allow coreboot to utilize open source
MP init without running into FSP-S related code blocks.
Note: At present, Intel Meteor Lake FSP doesn't have support for
MultiPhase SI Init, Index 2 (submitted a FSP code changes over
chrome-internal to enable this feature to decouple MP Init from
FSP-S init).
This patch is backported from
commit b6c3a0325b (soc/intel/alderlake:
Implement MultiPhase SI Init Index 2 callback).
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Perform several thousands cycles of suspend test and power cycle
without running into any issue.
Change-Id: I2ea1a8bb2b142e39c2bc9d248b7fd0041366c0db
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70558
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
This patch implements mps2_noop_get_number_of_processors() API with
minimal information required for Intel MTL FSP to utilise the
`MP_SERVICES_PPI_V2_NOOP` config.
The major difference between Intel ADL and MTL FSP in terms of doing
CPU feature programming aka utilizing MP PPI wrapper code is that,
starting with MTL, FSP has dropped the `SkipMpInit` UPD.
It means now, coreboot doesn't have any way to skip FSP doing MP Init
operation. But during ADL, coreboot had introduced the
MP_SERVICES_PPI_V2_NOOP config that is used to skip FSP about
actually running any CPU feature programming on APs.
The idea is to use the same config even in MTL to provide only the
must have information (to bypass any assert in FSP during debug image)
to FSP.
Passing `FSP_UNSUPPORTED` from mps2_noop_get_number_of_processors()
results in `assert` while compiling FSP in debug mode hence,
implementing the function to pass only the information about BSP being
the active processor along with passing `FSP_SUCCESS` (eventually it
makes FSP happy and doesn't run into any issue in debug and/or release
mode).
TEST=Able to build and boot Google/Rex and Google/Kano while
coreboot skip calling into FSP for doing MP init.
Change-Id: I75d7e151699782210e86be564b0055d572cacc3f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70555
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Add EC memory layout and Q events for AMD Cezanne based boards,
the "StarBook Mk VI" and "StarFighter Mk I", which both use the ITE
5570E.
Change-Id: I87806b830b3d58a6ce3b89f45b5a07f4502a87f3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68333
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove flag in VBTs for 'Use fixed resolution at boot' to allow FSP/GOP
display init to use native panel resolution instead.
TEST=build/boot multiple google/octopus variants with edk2 payload,
verify boot logo not distorted/stretched.
Change-Id: Ia31ff28379282619dfa22a955bee1a768bb54bb8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Boot menus are too small at native 4K res on some panels, so
set fixed display resolution to 1920x1090p
TEST=build/boot KOHAKU with 4K display, verify boot menu text legible.
Change-Id: I82563c83de7ab302151f60d86b8a6824330d03ea
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
coreboot has been keeping a mirror of all the toolchain packages used
for releases for quite a while now. This adds an option to fetch the
packages from the coreboot mirror directly to buildgcc.
This can help with both our releases and when one of the various
servers experiences interruptions or changes a path.
To do this, the URL and filename needed to be split apart, which led to
quite a few changes in the buildgcc script.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7df58dca152e7bfe9fde34d290e05b52515b20d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
It's hidden behind the configuration option `CONFIG_ROMSTAGE_LIBHWBASE'.
This also adds some glue code to use the coreboot console for debug
output and our monotonic timer framework as timer backend.
Running Ada code in romstage and more particular libhwbase brings a few
challenges as global initialized variables are not supported in
Cache-As-Ram mode.
1. The libhwbase dynamic mmio driver implementation makes the Gnat
compiler generate some global initialized variables.
For this reason, when compiled for romstage or for romstage and
ramstage the static mmio driver is enforced (`HWBASE_STATIC_MMIO').
2. The Gnat compiler generates elaboration functions to initialize
program data at runtime. These elaboration functions are called by
the romstage_adainit() function.
The data references symbols suffixed by `_E'. Even though these
symbols, at compilation time, do not contain any data and are
filled with zeros, the Gnat compiler installs them in the .data
section.
Since these symbols are actually filled with zeros, it is safe to
install them in the .bss section.
cf. https://docs.adacore.com/gnat_ugn-docs/html/gnat_ugn/gnat_ugn/elaboration_order_handling_in_gnat.html#elaboration-code
This patch requires the libhwbase
https://review.coreboot.org/c/libhwbase/+/69854 CL.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libhwbae compiles for romstage and loads successfully
Change-Id: I670249d33506e886a683e55d1589cb2bf9b16aa3
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70275
Reviewed-by: Boris Mittelberg <bmbm@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If selected, libgnat is linked into romstage. In addition, a call to
romstage_adainit() is added to support Ada program data
initialization.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Ada code compiles for romstage and loads successfully
Change-Id: I74f0460f6b14fde2b4bd6391e1782b2e5b217707
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70274
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Hexdump command is not available in coreboot-sdk. Replace it with
equivalent implementation using commands that are present in the
container.
TEST=Passed "VP46XX" as prefix variable and it produced the same
crc32 result before and after the change.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Icad93933335b8c5ebd8fee74cc9aaed36bb56482
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
According to Intel doc#630774, BIOS should clear Host Interrupt Status
if it has read all the slots of the message from the ME circular buffer.
Since this is not found in client ME document, add a Kconfig
SOC_INTEL_CSE_SERVER_SKU that only clears interrupt status for Server
ME SKU.
On SPR-SP, if mainboard calls get_me_fw_version via HECI-1, with the
change can avoid seeing below Linux warning during boot with Linux
v5.12:
[ 17.868929] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 17.883819] CPU: 10 PID: 0 Comm: swapper/10 Not tainted 5.12.0
[ 17.902412] Hardware name: Wiwynn Crater Lake EVT2/Crater Lake-Class1
[ 17.922327] Call Trace:
[ 17.927780] <IRQ>
[ 17.932253] dump_stack+0x64/0x7c
[ 17.939640] __report_bad_irq+0x37/0xb1
[ 17.948206] note_interrupt.cold.11+0xa/0x63
[ 17.957713] handle_irq_event_percpu+0x6a/0x80
[ 17.967626] handle_irq_event+0x2a/0x50
[ 17.976163] handle_fasteoi_irq+0x9e/0x140
[ 17.985305] __common_interrupt+0x38/0x90
[ 17.994255] common_interrupt+0x7a/0xa0
[ 18.002821] </IRQ>
[ 18.007514] asm_common_interrupt+0x1e/0x40
Change-Id: I1cf21112870e53a11134d43e461b735ead239717
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66579
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
In some cases, fw_config is used for ids like sar_id, sku_id etc.
To avoid calling fw_config_probe over and over, hence provide the
method to return the value then caller can use the switch case
instead of if else statement.
TEST=get fw_config field value on nivviks.
[INFO ] fw_config get field name=DB_USB, mask=0x3, shift=0, value =0x1
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Iae89668e8fe7322d5a4dcbf88a97d7ed36619af5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
With commit 34a7e66faa ("util/cbfstool: Add a new mechanism to
provide a memory map"), builds are failing on 32-bit platforms with:
../cbfstool/cbfstool.c:397:30: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
printf("Image SIZE %lu\n", image_size);
~~~ ^~~~~~~~~~
%zu
Change the format specifier from %lu to %zu.
TEST=`emerge-cherry coreboot-utils` now succeeds
Change-Id: I3602f57cf91c330122019bfa921faef6deb2b4ce
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70848
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Based upon hardware differences from mc_ehl2, disable RP7
and enable RP3 and RP5.
Change-Id: Iecaa3098c3e4c9ce15254bb8bd1fe6da86d6e706
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70689
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new mc_ehl variant, which is based on mc_ehl2 implementation.
This patch uses a copy of mc_ehl2 with changes only in naming
as a starting point for the new mc_ehl3 variant.
Follow-up patches will introduce the functional changes against
mc_ehl3.
Change-Id: Ie8c18b4f16d88b175ce576c2ef4c2e6ee0b4c306
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
With commit 0110e1abe0 ("util/genbuild_h: Update printf %d to %s for
sh compatability"), the ChromeOS coreboot build is failing with:
In file included from src/lib/version.c:4:
/build/nissa/tmp/portage/sys-boot/coreboot-0.0.1-r5473/work/build/nivviks/build.h:10:32: error: 'v1' undeclared here (not in a function)
10 | #define COREBOOT_MAJOR_VERSION v1
| ^~
src/lib/version.c:35:46: note: in expansion of macro 'COREBOOT_MAJOR_VERSION'
35 | const unsigned int coreboot_major_revision = COREBOOT_MAJOR_VERSION;
| ^~~~~~~~~~~~~~~~~~~~~~
/build/nissa/tmp/portage/sys-boot/coreboot-0.0.1-r5473/work/build/nivviks/build.h:11:32: error: 'v9308' undeclared here (not in a function)
11 | #define COREBOOT_MINOR_VERSION v9308
| ^~~~~
src/lib/version.c:36:46: note: in expansion of macro 'COREBOOT_MINOR_VERSION'
36 | const unsigned int coreboot_minor_revision = COREBOOT_MINOR_VERSION;
| ^~~~~~~~~~~~~~~~~~~~~~
This is because the ChromeOS coreboot repo has a tag which is not in the
expected <major>.<minor> format:
$ git tag
v1.9308_26_0.0.22
Change genbuild_h.sh to only use the version from `git describe` if it's
in the expected <major>.<minor> format.
TEST=ChromeOS coreboot build now succeeds, with versions set to 0:
#define COREBOOT_MAJOR_VERSION 0
#define COREBOOT_MINOR_VERSION 0
Building upstream coreboot, the versions are still set correctly:
#define COREBOOT_MAJOR_VERSION 4
#define COREBOOT_MINOR_VERSION 18
Change-Id: I81b2317a83cdec4cc2aad60af2990e5e3f4ad694
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Usha P <usha.p@intel.com>
On nissa, sending EOP late improves boot time by about 57ms.
Before (SOC_INTEL_CSE_SEND_EOP_EARLY):
943:after sending EOP to ME 931,206 (58,431)
943:after sending EOP to ME 932,911 (58,427)
943:after sending EOP to ME 930,908 (58,429)
943:after sending EOP to ME 941,357 (61,748)
943:after sending EOP to ME 933,289 (62,050)
943:after sending EOP to ME 939,578 (62,453)
943:after sending EOP to ME 932,491 (62,050)
943:after sending EOP to ME 929,693 (62,655)
943:after sending EOP to ME 942,247 (62,654)
943:after sending EOP to ME 936,984 (61,751)
After (SOC_INTEL_CSE_SEND_EOP_LATE):
943:after sending EOP to ME 1,107,816 (3,498)
943:after sending EOP to ME 1,053,286 (25,212)
943:after sending EOP to ME 1,124,095 (3,511)
943:after sending EOP to ME 1,098,591 (3,498)
943:after sending EOP to ME 1,107,772 (3,499)
943:after sending EOP to ME 1,080,008 (45,969)
943:after sending EOP to ME 1,081,754 (8,024)
943:after sending EOP to ME 1,109,193 (4,102)
943:after sending EOP to ME 1,088,866 (4,201)
943:after sending EOP to ME 1,081,684 (4,203)
BUG=b:247902068
TEST=EOP time is improved on nissa (measurements above).
Change-Id: I2389831b4ab62f247193b5b0c5ec201e12eaa3db
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70849
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Jan Samek