When "fadt->FADT_MinorVersion" is not explicitly set to the right value, gcc sets it up to "0".
So set it correctly for treewide.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ic9a8e097f78622cd78ba432e3b1141b142485b9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Lance Zhao
Add a mem_parts_used.txt for Crota, containing the
memory parts used in proto builds. Generate Makefile.inc and
dram_id.generated.txt using part_id_gen.
DRAM Part Name ID to assign
MT62F1G32D4DR-031 WT:B 0 (0000)
MT62F512M32D2DR-031 WT:B 1 (0001)
H9JCNNNBK3MLYR-N6E 1 (0001)
H9JCNNNCP3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 2 (0010)
BUG=b:215443524
TEST=emerge-brya coreboot
Change-Id: I0ff6ffea4b879b6e1287e1e3cb9fd36a80f52ed6
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Correct some Quickpath initialisation steps according to findings from
two different Intel reference code binaries as well as MCHBAR register
dump comparisons between vendor firmware and coreboot.
The MSR_TURBO_POWER_CURRENT_LIMIT information comes from EDK2 sources.
Tested on Apple iMac 10,1 (Clarkdale, aka desktop Ironlake), QPI init
now completes successfully instead of causing hangs before raminit.
Also tested on HP ProBook 6550b (Arrandale, aka mobile Ironlake), still
reaches payload (e.g. TianoCore).
Change-Id: Icd0139aa588dc8d948c03132b5c86866d90f3231
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Move the remaining HECI-related stuff to southbridge scope, as the HECI
hardware is in the southbridge. Note that HECI BAR is now enabled a bit
earlier than before, but this shouldn't matter.
Change-Id: I4a29d0b5d5c5e22508bcdfe34a1c5459ae967c75
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The length should be checked before the PMU_STR_INS_INDEX(th) character
is accessed, otherwise it is going to an access violation.
Change-Id: I8b59eb34e1cb01fd6e2571fcebc28ef2084b6ec4
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add TIANOCORE_PRIORITIZE_INTERNAL which, when enabled, will build edk2
with boot from internal devices before external devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib1f73c8f3f2f2376cdc197b58d259446dc5f0138
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add TIANOCORE_HAVE_EFI_SHELL, which when enabled, will build edk2
with the EFI Shell binary.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1272f514e3f5becfe1fddd58ca0d820c5d1c1b54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Adds TIANOCORE_FOLLOW_BGRT_SPEC which, when enabled, will follow
the BGRT Specification implemented by Microsoft and the Boot Logo
will be vertically centered 38.2% from the top of the display.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If508166fe657d1cc032dd09a0fa231c7b60d9846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add TIANOCORE_BOOT_MANAGER_ESCAPE which, when enabled, will use
Escape as the hot-key to access the Boot Manager. This replaces
the default key of F2.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1e60d116367542f55f0ffa241a6132e4faabe446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some processor families allow for SMM setup to be done in parallel.
On processors that have this feature, the BIOS resource list becomes
unusable for some processors during STM startup.
This patch covers two cases: (1) The BIOS resource list becomes twice
as long because the smm_relocation function is called twice - this is
resolved by recreating the list on each invocation. (2) Not all
processors receive the correct resource list pointer - this is resolved
by having every processor execute the pointer calculation code, which is
a lot faster then forcing all processors to spin lock waiting for this
value to be calculated.
This patch has been tested on a Purism L1UM-1X8C and Purism 15v4.
Signed-off-by: Eugene Myers <cedarhouse@comcast.net>
Change-Id: I7619038edc78f306bd7eb95844bd1598766f8b37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Commit ea3376c (SMM module loader version 2) changedhow the
SMBASE is calculated.
This patch modifies setup_smm_descriptor to properly acquire the
SMBASE.
This patch has been tested on a Purism L1UM-1X8C and a Purism 15v4.
Signed-off-by: Eugene Myers <cedarhouse@comcast.net>
Change-Id: I1d62a36cdcbc20a19c42266164e612fb96f91953
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61688
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit b433d26ef1 (arch/x86: Define
HPET_ADDRESS_OVERRIDE) added this Kconfig option and referenced the
via/cx700 chipset which has been dropped before the 4.9 release. No SoC
in the current tree selects HPET_ADDRESS_OVERRIDE and all SoCs have
their HPET mapped at 0xfed00000, so drop this unused and no longer
needed Kconfig option.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4021ed6f84473c7a9223323fc8aa5d3f935d8084
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62276
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The AMD SoCs had a check to make sure that HPET_ADDRESS_OVERRIDE isn't
set so that the HPET_ADDRESS Kconfig option will have the right default
value. Instead check if the HPET_ADDRESS Kconfig value matches the
HPET_BASE_ADDRESS define in the SoC code which is the case if
HPET_ADDRESS_OVERRIDE isn't selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icf1832eb36c031e93ba24f342e9a8a7bf13faecc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62275
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To be able to link libcbfs without vboot, we need garbage
collection now.
Change-Id: Id9a9fe7efb9fb4409a43ae8357f4f683618805d2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Casts from integer to pointer are usually a case for phys_to_virt().
Change-Id: I861d435ff2361cdc26a2abd46d43b9346fa67ccc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Turns out 200ms still isn't enough in the worst reset conditions.
There's been some reports of failures at 200ms with some older
cr50 versions. Let's not take any chances and bump this way up
since if this fails, it prevents boot.
BUG=b:213828947
BRANCH=None
TEST=Reboot and suspend_stress on Nipperkin
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5be0a80c064546fd277f66135abc9d0572df11cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The ddr_base_info struct, which stores basic DDR information, should be
platform independent. Currently the struct is defined in each SoC's
dramc_parah.h. To prevent code duplication, move it as well as other
related structs and enums to a common header.
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I99772427f9b0755dc2c778b5f4150b2f8147bcc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
VSRAM_CORE is not used on kingler/krabby, so we disable it.
This implementation is according to chapter 3.7 in MT8186 Functional
Specification.
BUG=b:220071688
TEST=the rail steadily shows 0V in either S0, S3, and S5.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I5256f6a2c0ca5a951dc79f564575b526a84463fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62253
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since commit 7cd8ba6eda (console: Add loglevel prefix to interactive
consoles) on the very first boot some errors occur because no MRC data
is present in the MRC cache. This is normal because the memory training
is not done yet.
This patch changes the loglevel to BIOS_NOTICE which will prevent an
error in the log in this case.
Change-Id: I1e36590e33507515e5b9dd4eb361b3dbe165511e
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61973
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In the LOG_FAST macro, the comparison was incorrectly made with 'level'
value. Correct is the comparison with 'speed'.
With the wrong comparison you cannot set a lower level for console log,
the highest level is always output.
TEST:
- Boot mc_ehl2 with console log level 5 and check output
Change-Id: Ib5b4537ae2cbf01c51c3568d312b5242c4bee7bb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
While on it, use tab for indent.
Change-Id: I6cb0b4183db819d721f4882ab2168d22bcd664e3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reconfigure the GPIO's so that they are configured correctly.
The original configuration was based on the AMI firmware, and
whilst it worked, it wasn't optimal.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I27ecf066685f2a81ac884a9f276c518544449443
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reconfigure the CNVi GPIO's so that they are configured correctly.
The original configuration was based on the AMI firmware, and
whilst it worked, it wasn't optimal.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9fc9963e91da0267c8740fee20a3ec41895b4953
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60758
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Update trackpad GPIO to avoid IRQ Storm, that causes high power
consumption when idling or in S3.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieee27bd9079617ab95f4f1e27ef98b49e89e5b41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Configure the TPM IRQ GPIO for TGL (StarBook Mk V) so that the
hardware TPM can be used.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ife88075e70184b46e69f2e24c70b85ec254edd64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60756
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Don't configure ESPI GPIOs as the default values are correct.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I052fbfccd075d19340d3e27ad0c62965c80badaf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
Rework edkii makefile so that the various build options are
unified between CorebootPayloadPkg, uefipayload_202107 and
upstream.
This sets the project directory based on the git repository name
i.e. https://github.com/mrchromebox/edk2 becomes mrchomebox
Also builds to $(obj)/UEFIPAYLOAD.fd and allows using a commit
ID without a branch.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3cc274e7385dd71c2aae315162cc48444b7eaa5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Martin Roth - Personal <martinroth@google.com>
Kevin Chang