This patch adds GOOGLE_LAZOR which is just a copy of GOOGLE_TROGDOR for
now.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0dca8e1c29bdd91625d58b3cb583b530ed925e9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39784
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Philip Chen <philipchen@google.com>
CB:35077 pulled TPM measurement code into the bootblock, with the catch
that we'll only cache PCR extensions and not actually write them to the
TPM until it gets initialized in a later stage. The goal of this was to
keep the heavy TPM driver code out of the size-constrained bootblock.
Unfortunately, a small mistake in the tspi_tpm_is_setup() function
prevents the compiler from eliminating references to the TPM driver
code in the bootblock on platforms with CONFIG_VBOOT and
CONFIG_SEPARATE_VERSTAGE. In those cases vboot_logic_executed() is known
at compile-time to be 0, but that still makes the final expression
`return 0 || tpm_is_setup;`. We know that tpm_is_setup can never be set
to 1 in the bootblock, but the compiler doesn't.
This patch rewrites the logic slightly to achieve the same effect in a
way that the compiler can follow (because we only really need to check
tpm_is_setup in the stage that actually runs the vboot code).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Idc25acf1e6c02d929639e83d529cc14af80e0870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39993
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Switch to using Jasper Lake SoC code from soc/intel/jasperlake and stop
referring from soc/intel/tigerlake.
Addtionally mainboard changes are done to support build.
BUG=b:150217037
TEST=Build and boot waddledoo. Build jasperlake_rvp and volteer board.
Change-Id: I39f117bd66cb610a305bcdb8ea65332fd0ff4814
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39825
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
cmos.default used to be loaded only when cmos is needed to be reset,
but conditional loading of CBFS files may change the calculated PCRs
if measurement is hooked on each loading.
In order to resolve this, loadings should be made less conditional,
(if a file might be used, it should be loaded and measured) but the
use of loaded data remains conditional.
Change-Id: If6ea0d1cbaa7d96f7dea7e77b7548ca2b30efe9e
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39906
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This adds the path to chrome EC headers to the depthcharge
build. Depthcharge currently includes a manually maintained copy of
the EC headers which are perpetually out of sync with the real
interface definitions. By adding the include path, we can build
depthcharge with the actual EC interface definitions and eliminate the
manual maintenance of copies of EC headers. Once the include path is
in place, we can remove the copies of the EC headers from depthcharge.
BUG=b:152373049
Change-Id: I1ce0ad9dc99ea52f177d4fb034fd23efd95a7864
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
I will pass my responsibilities to Christian Walter.
I have hardly any time left for the coreboot project.
Change-Id: Ia60e71c5cbd361486dbc924ad954db203e285a5a
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update FSPM header to include DisableDimmCh Upds for Tiger Lake
platform version 2457.
BUG=b:152000235
BRANCH=none
TEST="Build and Boot on Ripto/Volteer"
Change-Id: Ic743cb2134e6273a63c1212506c81ccbbdec442a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Certain PCIe endpoints cause an exception inside AmdInitMid when PCIe
ClockPM is enabled in AGESA PCIe initialization structures. Disable it
to allow platform to boot with such devices. coreboot driver enables
the ClockPM correctly on such devices anyway.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7fb13f915861c26cf773960abb12a3a1c0211cdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Include types.h in src/soc/intel/common/block/include/intelblocks/cse.h
to use type bool.
Without this, there can be a build error like below,
src/soc/intel/common/block/include/intelblocks/cse.h:208:1:
error: unknown type name 'bool'; did you mean '_Bool'?
bool cse_is_hfs1_com_soft_temp_disable(void);
^~~~
_Bool
src/soc/intel/common/block/include/intelblocks/cse.h:214:1:
error: unknown type name 'bool'; did you mean '_Bool'?
bool cse_is_hfs3_fw_sku_custom(void);
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I92ee533bca7dc255f7a341b2a68bbc09900996a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change Graphics Init default for RUN_FSP_GOP to depend on
INTEL_GMA_HAVE_VBT rather than INTEL_GMA_ADD_VBT, since
RUN_FSP_GOP selects INTEL_GMA_ADD_VBT for several Intel SoC's.
Test: create default config for gogle/cyan, RUN_FSP_GOP
still default display init selection but no more circular
dependency warning from config.
Change-Id: I8b978d9938c3d0024d4dd40000b988430664cee7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Including gma.asl at the platform level (vs the board level)
means that even desktop boards need to include the default
brightness levels, which makes no sense. To begin to clean this up,
include gma.asl in default_brightness_levels.asl (as well as
the handful of board-specific brightness files) and remove it
from the various platforms.
A follow-on commit will remove default_brightness_levels.asl
from all boards which lack an internal display.
Change-Id: I8063deeef4ab6d6ab34ed9b0be5b1d541d6e9b6b
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39878
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Allow Chrome OS to be enabled for this QEMU target. By default
this does not change anything unless it is selected in the build
configuration, but it makes it possible.
Native VGA init is not forced when Chrome OS is enabled because the
drm-bochs driver does not work with chrome (even the latest upstream
kernel driver with drm atomic support) but it does work with virtio.
The coreboot graphics init needs to match what is selected with qemu
(with -vga std or -vga virtio) which in turn will determine which
kernel driver is used.
A second FMAP is added with both RW-A and RW-B regions which is
required by chromeos.
Recovery mode can be entered by supplying a custom fw_cfg option
when launching qemu: -fw_cfg name=opt/cros/recovery,string=1
Change-Id: I24b4532ea961e68558663292c99d121f0a30ce3b
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This enables the mainboard to use a TPM if it is selected in the
configuration. By default this does nothing, but it allows the
TPM to be enabled and used with the CONFIG_USER_TPM2 Kconfig option.
Using a TPM with QEMU requires either a physical TPM backend or
the swtpm package with a socket:
-chardev socket,id=swtpm,path=/tmp/swtpm/socket
-tpmdev emulator,id=tpm0,chardev=swtpm
-device tpm-tis,tpmdev=tpm0
Change-Id: I0d79a5a0f590c57998ababb660b52d9e3ed2d484
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
QEMU does not have a separate northbridge chip, so the mainboard
needs to handle the ACPI name and paths so that devices can get
generated into the SSDT properly. This fixes the PIRQ and TPM
table generation.
This issue can be seen in the coreboot output:
ACPI_PIRQ_GEN: Missing LPCB ACPI path
Change-Id: Ifc7d4359eea38ac0b55d655e39191ae7f8655fe4
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Ensure that the low memory is properly reserved so it does not get
marked as normal RAM and get wiped or reused by firmware or the kernel.
This ensures that the low RSDP is always available for the kernel.
This is only noticed if something wipes the RSDP before the kernel
boots, which happens if you use the depthcharge payload and boot in
developer mode.
Change-Id: I7295018416229bc957ecbf26f77623a57965557e
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When the TPM is enabled in QEMU the fw_cfg interface will return
~200KiB of ACPI tables, so this needs to be increased from the default
in order to be able to boot.
This is seen when using a TPM with qemu as it will hang when
processing the fw_cfg tables.
qemu-system-x86_64 \
-machine q35 -enable-kvm -vga virtio -serial stdio \
-drive 'id=hd,file=disk.bin' -bios coreboot.rom \
-chardev 'socket,id=swtpm,path=/tmp/swtpm/swtpm-sock' \
-tpmdev 'emulator,id=tpm0,chardev=swtpm' \
-device 'tpm-tis,tpmdev=tpm0'
Change-Id: I21980aace8e86e636f5ae7b55148f4c31404edba
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The maximum ACPI table size is currently hardcoded to 144 KiB.
When using QEMU with TPM enabled there is ~200 KiB of ACPI tables
returned by the fw_cfg interface, so in order to allow this to be
overridden by a mainboard move it to Kconfig.
This is seen when using a TPM with qemu as it will hang when
processing the fw_cfg tables.
qemu-system-x86_64 \
-machine q35 -enable-kvm -vga virtio -serial stdio \
-drive 'id=hd,file=disk.bin' -bios coreboot.rom \
-chardev 'socket,id=swtpm,path=/tmp/swtpm/swtpm-sock' \
-tpmdev 'emulator,id=tpm0,chardev=swtpm' \
-device 'tpm-tis,tpmdev=tpm0'
Change-Id: Ib5baa8fe12cb9027a340875f1ccf5fef6f9460bd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
After measured boot is decoupled from verified boot in CB:35077,
vboot_platform_is_resuming() is never vboot-specific, thus it is
renamed to platform_is_resuming() and declared in bootmode.h.
Change-Id: I29b5b88af0576c34c10cfbd99659a5cdc0c75842
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
mrc.bin, on platforms where it is present, is code executed on CPU, so
it should be considered a part of CRTM.
cbfs_locate_file_in_region() is hooked to measurement here too, since
mrc.bin is loaded with it, and CBFS_TYPE_MRC (the type of mrc.bin) is
measured to TPM_CRTM_PCR rather than TPM_RUNTIME_DATA_PCR.
TODO: I have heard that SMM is too resource-limited to link with vboot
library, so currently tspi_measure_cbfs_hook() is masked in SMM.
Please correct me if I am wrong.
Change-Id: Ib4c3cf47b919864056baf725001ca8a4aaafa110
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Since the variants' devicetrees are almost identical, convert to
using an overridetree setup for simplicity.
Test: build all slippy variants, compare generated static.c to ensure
resulting generated contents unchanged (although layout will)
Change-Id: If237fad38a1bccfb8e51edfae3ecb75d05ade240
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39919
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Clean up Link's mainboard dir by putting the SPD files in
a spd subdirectory like all other/newer boards use, and
selecting GENERIC_SPD_BIN to include them in the build.
Test: build google/link and verify spd.bin unchanged
Change-Id: I9c2f9f77dbdd6552c5ae1e7a0df2051b9b85badc
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Link's DID data makes no sense, and ACPI backlight controls don't work
as a result. Replace them with the default profile used by most/all
other boards.
Test: build/boot google/link, verify ACPI backlight controls functional
Change-Id: Ia7cb3f10bd3c05ebaf414c17a8f94d2e9b40ae26
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39908
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Update the Lenovo Ivy Bridge documentation that no issues could be
observed on W530.
Tested on Lenovo W530 with stripped ME and found no issues:
commit 93b0c7cfc6
* USB
* Bluetooth
* Wifi
* Wifi-kill switch
* libgfxinit
* SATA
* mSATA
* Audio
* SD-card
* Ethernet
* Keyboard
* Fn-Keys
* Display brightness
* ACPI S3 resume
* CPU temperature reporting
* Stress test stable (intel_pstate no_turbo due to W530 overheating bug)
* Youtube videos
* stress -c 8 -m 1 -t 3600
Change-Id: I46d23d41cc6ade5e641a6ddb3f357a6036002edc
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39603
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, those who want to use measured boot implemented within
vboot should enable verified boot first, along with sections such
as GBB and RW slots defined with manually written fmd files, even
if they do not actually want to verify anything.
As discussed in CB:34977, measured boot should be decoupled from
verified boot and make them two fully independent options. Crypto
routines necessary for measurement could be reused, and TPM and CRTM
init should be done somewhere other than vboot_logic_executed() if
verified boot is not enabled.
In this revision, only TCPA log is initialized during bootblock.
Before TPM gets set up, digests are not measured into tpm immediately,
but cached in TCPA log, and measured into determined PCRs right after
TPM is up.
This change allows those who do not want to use the verified boot
scheme implemented by vboot as well as its requirement of a more
complex partition scheme designed for chromeos to make use of the
measured boot functionality implemented within vboot library to
measure the boot process.
TODO: Measure MRC Cache somewhere, as MRC Cache has never resided in
CBFS any more, so it cannot be covered by tspi_measure_cbfs_hook().
Change-Id: I1fb376b4a8b98baffaee4d574937797bba1f8aee
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Add an enable reset delay to avoid messages like this in the
kernel:
i2c_hid i2c-WCOM50C1:00: failed to change power setting.
This gets rid of all the warnings except one on reboot/shutdown.
That last case likely isn't fixed because the sleep command is
being sent directly from i2c_hid_shutdown(), so no ACPI routines
get to run and provide the delay. Since the machine is going down
for shutdown/reboot anyway, fixing that last case is a lower
priority.
BUG=b:145094539
TEST=Run on kohaku, switch to guest mode and log out, no errors
Signed-off-by: Evan Green <evgreen@chromium.org>
Change-Id: I8fadf497dd09e5b95b1d74443fb0543d3555dbb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
For quite a bit now we are extending the FSP_USE_REPO option to be
available for all Intel SoCs. This results in a list being not only
hard to maintain but also prone to errors.
To change that behaviour this commit introduces the
HAVE_INTEL_FSP_REPO config option for SoCs that are supported from within
3rdparty/fsp.
If a SoC selects HAVE_INTEL_FSP_REPO the config option FSP_USE_REPO is
selected by default, but can be still deselected by the user in menuconfig.
Change-Id: I68ae373ce591f06073064aa75aac32ceca8fa1cc
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37582
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For newer Intel graphics(>=11), The DDI port max lanes are set to 4 by
default. And kernel driver no longer relies on coreboot to provide
information via DDI_BUF_CTL_A(for DDI port A) register programming.
Hence removing this code.
BUG=b:150788968
BRANCH=None
TEST=checked jslrvp and tglrvp compilation and boot.
Change-Id: I32692501b60f48a07b8fbb9bb3a755b18f4b3ea9
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39313
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is not a single mainboard anymore, it's actually three variants.
Change-Id: I66f1239abadd8bf93269d6d4617329dc4b925e8d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Make use of overridetrees, as these mainboards are very similar.
Tested on GA-H61MA-D3V, still works fine.
Change-Id: I1b587a091da631cb172eb76722958da6c7518893
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39668
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coalescing is not needed, as root port #1 is enabled. Also, update the
comments to look more like the other two variants. Note that the Intel
H61 PCH only has six root ports, so devices 1c.6 and 1c.7 do not exist.
Change-Id: I3f4bf99ceec6c77f6e1eabea9b712245afee7d34
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39742
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates the align attribute of memranges to be represented
as log2 of the required alignment. This makes it consistent with how
alignment is stored in struct resource as well.
Additionally, since memranges only allow power of 2 alignments, this
change allows getting rid of checks at runtime and hence failure cases
for non-power of 2 alignments.
This change also updates the type of align to be unsigned char.
BUG=b:149186922
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: Ie4d3868cdff55b2c7908b9b3ccd5f30a5288e62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds a helper macro POWER_OF_2 that is useful for
calculating the requested power of 2.
Change-Id: Ie70f93b6ac175699c11cae7d8f023a52cce01e88
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This initial devicetree attempts to correctly configure the status of
each PCI device. Not all required drivers are instantiated, nor are
all of the SoC options fully selected yet.
PCIe root ports are enabled and clocks are assigned.
USB ports are assigned.
BUG=b:150165131
BRANCH=none
TEST=util/abuild/abuild -p none -t google/deltaur -x -a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I911ec08b0db3647d131113a138fb74a55612fd62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
This configuration sets up all of the GPIO pads for the first rev of
the board.
BUG=b:150165131
BRANCH=none
TEST=util/abuild/abuild -p none -t google/deltaur -x -a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I4f6398808809492dcb345ccaa09e199fa35e40cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Created a new Google baseboard using Tiger Lake named deltaur, taking
volteer as a starting point.
BUG=b:151102807
TEST=make build successful
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib98f328df22f39e7d9d625a3292954881ee15b15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
We're running into more and more situations where we need to tell one
SOC type from another, and instead of rewriting them every time, just
add some helper functions to the picasso SOC directory.
Change-Id: I24b73145cdfa80c09fbe036d1fb6079696c6d013
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/2051514
Reviewed-on: https://chromium-review.googlesource.com/2060904
Reviewed-on: https://chromium-review.googlesource.com/2060905
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Julius Werner