The call to dev_find_slot() may return PCI devices that
are disabled or unaccessible, as PCI enumeration does
not remove nodes from all_devices linked list.
Use PCI topology search instead.
Change-Id: I00233177e5572ca79002a7d141cda1b94b966330
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34083
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It is recommended to never reference PCI busses
using a static number. There is exception with
OPROM execution, where we want to translate the
bus number captured from the actual IO operation
into a matching device node in the devicetree.
Change-Id: I733c645ac5581c000b4cd6cdc05829cd039324d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update the AC/DC loadline values for all domains. Using the same
values as in arcada.
BUG=None
BRANCH=None
TEST=Build and Boot hatch EVT
Change-Id: If8ea48794d11dc68e40e6504c0d46a2b273a8ab6
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO46 is wired to a tiny switch on the board labelled "GPU Boost".
Since coreboot could make use of it, add a comment about it on gpio.c.
Change-Id: I0efa85e6d8235711521b10e56b7c89a25c4b2b7f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This GPIO is corrected with reference to the Apollo Lake SoC EDS Vol 4
revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be
used in Function 0 (GPIO) mode.
Change-Id: I98628ade3a1e19730ca6e6b4a63c28e6816176ce
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
We need to reduce the eMMC bus speed for these Apollo Lake mainboards
because of a limitation on Intel side for industry use cases.
Change-Id: Ide6a1a302001c0752d149bfdab175a27c8f8cc35
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Currently some of the LCM ID voltage gaps are below 100mV. For example, the
voltage difference between ID 2 and 3 is 503-440=63mV. To reduce the risk of
misrecognition from the hardware level, the voltages are adjusted so that all
the voltage gaps are larger than 100mV. The RD2 resistor values are also
updated.
BUG=b:136987483
TEST=emerge-kukui coreboot
Change-Id: Ib5c1f927fb54d8c9579f030e42eeec5a27daaceb
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34192
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The tolerance of ADC is +-10mV, but the resistors may also
introduce 1% variation, and causing the final measured
voltage to vary around 5%.
By the advisory from hardware team, checking the tolerance
seems not really solving or helping anything so we should
just ignore that and try to find best matched ID (this
also aligns to what Gru did).
BUG=b:136990271
TEST=Booted on Krane and no longer seeing ADC out of range
BRANCH=None
Change-Id: Ie02ca5aaafbcfa8f411d973ad0266eee385d6878
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34161
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: You-Cheng Syu <youcheng@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=build & run
Change-Id: I9845c8638e4b905de5d6985dc9f1fddd8b1a8942
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25210
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Before the system enters S0ix or S3, each GPIO community
will have its dynamic clock gating turned on. Upon return
to S0, the dynamic clock gating will be turned back off.
BUG=b:130764684
BRANCH=none
TEST=Used dut-power to verify that the clock gating is enabled
in S0ix and S3. Also used Store(..., Debug) statements in the
ASL code to verify it was getting called.
Change-Id: I20ff2aac035eaa5912af6c946d837567a4918bbf
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The GPID method returns the PCR Port ID of the given GPIO community.
The CGPM method alters the given GPIO community's PM bits, given in
Arg1.
Change-Id: I098ee08573eb4f8a45d9b5ae84f2d85ce525c9b8
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
These constants are needed in some ASL files, even when
__ACPI__ is defined.
Change-Id: I0f4f00b93d5d45794b7c9e0f72b51f3191eb3902
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34177
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Include the lpit.asl file in Hatch's DSDT definition.
BUG=b:130764684
BRANCH=none
TEST=S3 suspend/resume and S0ix entry/exit work correctly.
Ran > 200 iterations of suspend_stress_test and no issues found.
Change-Id: If8ebff3db091257e8452869636c0e024f3123e8b
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
The dynamic clock gating is causing boards to miss interrupts
whose pulses are shorter than 4us. Disable it using FSP UPDs.
BUG=b:130764684
BRANCH=none
TEST=Compiles
Change-Id: I8f1ec8f7c31192bce2a761ec99b86638435dc27c
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Increases CPU max core count to 16 for coffeelake Refresh-S Platform.
TEST: boot to linux OS on CFL-S refresh Intel RVP and verified the output
of cat /proc/cpuinfo shows no of processor=16.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I579ff6ae8227844741406c503d3994408ec2b617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34156
Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang Static Analyzer version 8.0.0 detects that the result of
log2_ceil(bios_size) and log2_ceil(window_size) is undefined if the
value of bios_size and window_size are negative. Add negative value
Check for bios_size and window_size after MIN operation.
Change-Id: I28577b6e0ba0ab45bb7804c17ba1f26c4b078b15
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
HP_INT_L(GPP_H0) is configured for GPIO IRQ instead of APIC IRQ since
it needs to trigger on both edges. With GPIO IRQ, it is necessary to
configure the trigger type in coreboot to match the ACPI
configuration. This is because:
1. ACPI configuration is used by intel-pinctrl driver in Linux kernel
to re-configure the trigger type for the pad in GPIO DW0 config
register. This is done when kernel driver probes and requests irq for
its device.
2. On resume from S3, the pad configuration gets reset and coreboot
sets the trigger type to LEVEL. However, kernel driver does not probe
again. This results in the trigger type being configured incorrectly.
This change updates the GPIO configuration for GPP_H0 to set the same
trigger type as advertised in ACPI for the kernel.
BUG=b:132672011
TEST=Verified that S3 works fine. Verified that interrupt on GPP_H0
works fine on boot as well as after suspend/resume.
Change-Id: Ieb44c7403a2f4911b4a8f422053dee8bcfb91d85
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34181
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit b19946cc62 (console: Remove support for printing extra bases)
truncated the digits string to only print integers of up to base 16.
However, that string was also used to print the leading 'x' or 'X' for
hexadecimal integers and is now too short. Fix this to prevent an out
of bounds read.
Change-Id: Iab6470cc88f445f074cf7c0b675346b37f3f2375
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Julius Werner <jwerner@chromium.org>
These printk() statements were added in commit cdc526e582
(southbridge/nvidia/ck804: Fix boot hang on ASUS KFSN4-DRE w/ K8 CPU)
when debugging another issue. They have undefined reads if ck804_num
is 0 and aren't needed anymore, so drop them.
Change-Id: I80b775370ac6485958948f0bff4510755a6cd2b8
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 137058{1,3}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33459
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The right specifier for printing ptrdiff_t is %td.
Change-Id: I7bae4d47f15cfe85ca870f687c6f702339f680bb
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 14021{64,68,76}
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33984
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Check for FSP HOBs is depending on CONFIG_DISPLAY_HOBS.
Use the CONFIG_DISPLAY_HOBS for display HOB info only and always check HOBs.
Use BIOS_ERR of printk() for FSP errors.
BUG=N/A
TEST=Check console output on Facebook FBG1701.
Change-Id: I3776fa37866c7ef3aea090842387660c22bbdd4d
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29371
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
AMD Picasso, and later, will not use CPU_AMD_AGESA or CPU_AMD_PI.
Those two symbols indicate an Arch2008 system. Add SOC_AMD_COMMON
to cause cpu_is_amd() to return TRUE on Picasso.
This removes an error message of "Unknown CPU".
The patch also assumes AMD Family 10h and non-AGESA Family 15h
devices were seeing the "Unknown CPU" message. No functionality
has been verified on these devices.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I3357606c37082f3587ff91924bf7a0e0f8af9625
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34146
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With DEVTREE_EARLY we could create incomplete device
objects with topology links removed to reduce footprint
for bootblock.
Declare everything with 'static __unused DEVTREE_CONST'
to avoid compiler errors and to not expose unusable
device object names to global scope.
Change-Id: Ie4cb9e75f179f44edf4f8256ad8320bc2d4ae71a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
- Remove unnecessary braces
- Move variable assignment out of function call
- Do not find lowest bit set of 0, which is undefined
- Use unsigned integer when bit shifting
Change-Id: I8651f8cd04165d8d31c44f7919ad5e43499d3d4c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229562
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Die if there are no memory ranks found to prevent a division by zero.
Change-Id: I6146dd8420f3734d1a672a9f29a098f47fcb739c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229628
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Only CONFIG_USE_INTEL_FSP_MP_INIT makes a difference whether native MP
init is used or not.
Also make USE_INTEL_FSP_MP_INIT mutually exclusive with
USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI as this option requires
coreboot to set up AP and publish PPI based on it.
Change-Id: I65b80805d3cd7b66f8c9f878d3c741b98f24288d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33357
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
digest from vb2_digest_bufer() does not contains the correct endian.
Create cb_sha_endian() which can convert the calculated digest into big endian
or little endian when required.
BUG=N/A
TEST=Created binary and verify logging on Facebok FBG-1701
Change-Id: If828bde54c79e836a5b05ff0447645d7e06e819a
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Fixed ROM area is allocated.
Reduce the ROM size using CONFIG_COREBOOT_ROMSIZE.
BUG=N/A
TEST=Facebook FBG-1701 booting Embedded Linux
Change-Id: I7a47bf2600f546271c5a65641d29f868ff2748bf
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The necessary conditionals are evaluated within
cpu/x86/Makefile.inc and there are no default
targets added unconditionally to build.
Change-Id: I694cccf6779551445b83659838749dff02aedece
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This is not used together with PARALLEL_MP and SMM_TSEG.
Platforms with SMM_ASEG continue to have their local
implementation doing the same thing.
Change-Id: I13a2f164804330c93240bff7f048e0a162b3ae25
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34154
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This southbridge code may be built with either ASEG or TSEG.
Fix minor collision in namespaces.
Change-Id: I04f90fb308c280621a3037fee4bece1e5655480e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Remove the per-platform empty stubs, builds would
just fail as there is no equivalent conditional for
the smmrelocate.c file.
Change-Id: Ie11f307b7bc5415bfdba6a2c66aed01b70d9f0e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Kyösti Mälkki