FBG1701 contains a TC358860 eDP to MIPI Bridge controller which needs
to be configured.
Add mainboard_configure_edp_bridge() to program the controller.
CPLD version is used to determine which table must be programmed.
The eDP is an i2c slave which expects the next i2c bus data for block
write:
<Slave Addr> <Reg Addr[15:8]> <Reg Addr[7:0]> followed by data with LSB
first.
BUG=N/A
TEST=Config eDP and verify LCD panels are working on Facebook FBG-1701
Change-Id: I262cb4376b86db94e3bb9522c556b5cc3ff38335
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The SUPERIO_NUVOTON_NCT6776_COM_A symbol should only be visible if
SUPERIO_NUVOTON_NCT6776 is selected as well.
Change-Id: I9c52d596080360bf3fc25265749ced66ec44f5dc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33440
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The asrock/h110m has a NCT6791D, but is selecting the NCT6776-specific
SUPERIO_NUVOTON_NCT6776_COM_A symbol. Use the NCT6791D symbol instead.
Change-Id: I9f3fde161844f919b070f2b6ce7e106411439a9a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <m.poliakov@yahoo.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Like the NCT6776, the NCT6791D has muxed COMA/GPIO8 functions. Since it
requires setting different bits, add a new Kconfig symbol to do it.
Change-Id: I62dc18810026f9b1550da19950f66af605600ec8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <m.poliakov@yahoo.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
ALIGN((a), b) and ALIGN_UP(a, b) needs 'helpers.h'
Change-Id: I029c7c5cbb19c7e69997b3d84f929cb61e8e2b23
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* Enable decoding the IPMI KCS to LPC
* Select the IPMI driver
* Add the PNP device that holds the IPMI KCS base address
Tested on Wedge100s.
Change-Id: I35634bbcbe6893bd72ec7e41f6ca7bba09d819a2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
* Add chips ops for IPMI KCS.
* Get IPMI version over KCS.
* Generates ACPI SPMI table for IPMI KCS.
* Generates SMBIOS type 38 for IPMI KCS.
* Generates ACPI SPMI device for IPMI KCS on LPC device.
* Add documentation
To use this driver on BMC that support KCS on I/O:
1. Add an entry to the devicetree.cb:
chip drivers/ipmi
device pnp ca2.0 on end # IPMI KCS
end
2. Select IPMI_KCS in Kconfig.
3. (Optional) enable LPC I/O decode for the given address.
Tested on Wedge100s.
Change-Id: I73cbd2058ccdc5395baf244f31345a85eb0047d7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The ALIGN_UP macro is basically an alias of the ALIGN macro; with this change
it's more obvious in which direction the alignment happens.
Change-Id: I6f1b9f9bbcafeb85a6ef5c10ce4b57edc0740e72
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
This patch contains the rest of the fixes for this subtree; having one change
for every area would create an unnecessary amouint of patches.
Change-Id: Id92c11d58693292d58cba323c8468db858becfb5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33630
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ALIGN_UP is an alias for ALIGN.
Change-Id: Ie723ebe80f8f627021151413cb43adce6c88a0dc
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33628
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Support SAMSUNG KMDP6001DA-B425 and MICRON MT29VZZZAD8DQKSL EMCP LPDDR4X DDR
From the calibration log of MICRON MT29VZZZAD8DQKSL, we found
the begin pass range of RX window earlier than with other DDR type.
So need change the DQS starting offset to increase the scan range of RX window.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on EMCP DRAM
Change-Id: I5fcc8673a2fbd7ec3a8776ab61c57f8903ddda20
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
The mode register setting of DRAM may fail without some
delay after each MR write.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly and stress test pass on Kukui.
Change-Id: I51785e90b2014994be5018bfe543245d44626242
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32284
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Huayang Duan <huayang.duan@mediatek.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Garg proto build has 3 SKUs:
garg 2A2C DB: SKU ID - 1
garg HDMI DB: SKU ID - 9
garg LTE DB: SKU ID - 17
For SKU#9, VBT will need to be overridden to enable DDI_C output to HDMI
BUG=b:134912735
BRANCH=octopus
TEST=emerge-octopus coreboot chromeos-bootimage
Cq-Depend: chrome-internal:1380847
Change-Id: I6c0ec086496eaf217ea8e326f5084d886d0e698f
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Make the linker script dynamic to support non default ROM sizes.
Prevents weird runtime issues due to stages overwriting parts of the
CBFS while decompressing stages.
Change-Id: I37b9187c719b907959f02a272ec0459aabbcda3c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
This code was copied from depthcharge which uses C99 comment style, but
coreboot uses C89 comment style. Update to match coreboot.
Change-Id: Ib67bb9ff17b7688826071453ab58894a0835ce10
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32875
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The compat string matching code was mostly copied from depthcharge. One
of the few differences is that we now store the list of compat strings
we're willing to match in a list rather than an array. Since our lists
insert at the front, that means the strings are now ordered lowest to
highest (not highest to lowest like in depthcharge).
We did rewrite the compat_rank matching code to accomodate for that...
however, what we didn't do is remove the break-statement in the loop
that matches all compat strings. When we search the lowest priority
first, we can't abort the search as soon as we found a match -- we have
to keep looking because we might find a higher priority match later.
This patch fixes the issue so that my Kevin can actually match for
google,kevin-rev5 (and doesn't just jump at the first best google,kevin
match).
Change-Id: Ibe3d84bbce6de3cd49c746a667ae1ccfdc843105
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32874
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support to boot FIT image configurations consisting of
a base device tree and one or more overlays. Since extracting the right
compatible string from overlay FDTs is problematic, we'll only support
this for FIT images that have the compatible string pulled out into the
config node.
This patch was adapted from depthcharge's http://crosreview.com/1555293
Change-Id: I0943f9a1869c9e416887c7ff16e33f7d91b74989
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32873
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for compressing individual device trees in the
FIT image. In order to make this efficient, we'll have to pull the
compatible property out of the FDT and store it directly in the config
node of the FIT image, so that we don't have to scan (and therefore
decompress) every single FDT on boot. Device tree compression is only
supported for FIT images that have this external compatible property.
For older images with no compression, we still support fallback to
scanning the FDT for the property.
This patch was adapted from depthcharge's http://crosreview.com/1553458
Change-Id: Ifcb6997782c480c8ef6692df17b66ad96264e623
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32872
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Kernel handoff on all architectures supporting FIT images already
includes flushing and disabling the cache. No need to waste any more
time flushing individual components (especially since in the case of
compressed DT overlays they will still get accessed again afterwards).
Change-Id: I7b483e920c5a71663b024b5b50804ffc84939830
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32871
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch makes some minor refactoring to the way the FIT parser
handles config nodes. A lot of this code was written in the dawn age of
depthcharge when its device tree library wasn't as well-stocked yet, so
some of it can be rewritten nicer with more high-level primitives.
There's no point in storing both the string name and the actual FDT node
of a FIT image node separately, since the latter also contains the
former, so remove that. Also eliminate code for the case of not having
an FDT (which makes no sense), and move some more FDT validity/compat
checking into fit_update_compat() (mostly in anticipation of later
changes).
This patch was adapted from depthcharge's http://crosreview.com/1553456
with a couple of modifications specific to coreboot's custom FIT loading
code.
Change-Id: Ia79e0fd0e1159c4aca64c453b82a0379b133350d
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32870
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds support for merging a device tree overlay (as defined in
Documentation/dt-object-internal.txt in the dtc repository) into a base
device tree. It was adapted from depthcharge's
http://crosreview.com/1536387.
Change-Id: Ibec833cd471201bcc7a79eebf360d5f12adb8ff9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32869
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is needed for SPI flash console in bootblock/romstage/postcar.
Change-Id: I18253cc028e87cd31879d722a6d788917e9c97b3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Code is based on microcode update procedure from fam10-15h with necessary
microcode blob structure updates for fam16h.
Currently updating microcode in romstage seem to be impossible. AGESA is
overriding the microcode patch regardles of the current microcode revision
patched on CPU. Use ramstage CPU init procedures to update microcode easily.
Tested with microcode blob 07030106 released 2018-02-09 from
platomav/CPUMicrocodes GitHub repository on apu2 platform.
TEST=boot Linux kernel 4.14.50 on PC Engines apu2 and run dmesg to see
patch_level=0x07030106 on all cores
Change-Id: Ic15cba06f3cd9cfbc538b6764b158fa699f0ecf6
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29272
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The DIMM manufacturing ID was not being initialized and so the DIMMs
were not described in SMBIOS tables properly.
The module type can also be provided, but the SMBIOS code expects
SPD module type values from DDR2 so the DDR3/4 values are adjusted
before sending to SMBIOS.
BUG=b:134897498
BRANCH=sarien
TEST=dump and compare with dmidecode
BEFORE:
Type: DDR4
Manufacturer: Unknown (0)
Form Factor: Unknown
AFTER:
Type: DDR4
Manufacturer: Hynix/Hyundai
Form Factor: SODIMM
Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
and make a configuraton for QEMU/ARM.
This CL allows building a sample libpayload for QEMU/ARM.
Change-Id: Ia32872c43a99357aa966de3582f6fdb2e2652517
Signed-off-by: Asami Doi <doiasami1219@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
As described in the comment, the BKDG-recommended algorithm causes
problems and isn't being used, so just delete it.
Change-Id: Ib3d4eba7ea2d7f6545613af5670b243bc011275f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1347325, 1347326
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This function attempts to set bits in the 20s of state and state_save,
which won't work since those variables are only 16 bits wide. Extend
them to 32 bits to capture all the bit operations.
Change-Id: I5616a2d879a85ff5f57af5af20384516659c62d6
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1347384
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The literal needs to be cast to a uint64 to prevent num_nodes
from being implicitly promoted to a signed int.
Change-Id: Id2fa328fb8d0a9827c7c78157c024736e9b26dc4
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1347343
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture
between AMD and Haiguang Information Technology Co.,Ltd., aims
at providing high performance x86 processor for China server
market. Its first generation processor codename is Dhyana, which
originates from AMD technology and shares most of the architecture
with AMD's family 17h, but with different CPU Vendor ID ("HygonGenuine")
/Family series number (Family 18h).
More details can be found on:
http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
Change-Id: I8af8b0f0675f978ac07522029696e43651a3153f
Signed-off-by: Jinke Fan <fanjinke@hygon.cn>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32876
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Felix Held