b207f3f370
The Prodrive Hermes mainboard has four i211 Ethernet NICs and an i210 Ethernet NIC, but their numbering isn't consistent with the PCIe root port function numbers. With only a M.2 SSD plugged in, Linux uses the following names: PHY 0 ---> enp6s0 PHY 1 ---> enp4s0 PHY 2 ---> enp3s0 PHY 3 ---> enp1s0 PHY 4 ---> enp2s0 These names change after adding or removing PCIe devices in slots connected to root ports that get enumerated before the NICs' root ports, because the assignment of secondary bus numbers depends on the enumeration order. Because of this, the "predictable" network interface names are not at all predictable, which is awful. To avoid this, describe the NICs using SMBIOS Type41 entries with the correct instance numbers. With this patch, Linux uses these names: PHY 0 ---> eno0 PHY 1 ---> eno1 PHY 2 ---> eno2 PHY 3 ---> eno3 PHY 4 ---> eno4 No matter what PCIe devices are present, these names don't change. Change-Id: I7a527298f84172f9135006083ad7e748dcc27911 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58628 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> |
||
|---|---|---|
| 3rdparty | ||
| Documentation | ||
| LICENSES | ||
| configs | ||
| payloads | ||
| spd | ||
| src | ||
| tests | ||
| util | ||
| .checkpatch.conf | ||
| .clang-format | ||
| .editorconfig | ||
| .gitignore | ||
| .gitmodules | ||
| .gitreview | ||
| AUTHORS | ||
| COPYING | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc | ||
| README.md | ||
| gnat.adc | ||
| toolchain.inc | ||
README.md
coreboot README
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
Payloads
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
Supported Hardware
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
Build Requirements
- make
- gcc / g++
Because Linux distribution compilers tend to use lots of patches. coreboot
does lots of "unusual" things in its build system, some of which break due
to those patches, sometimes by gcc aborting, sometimes - and that's worse -
by generating broken object code.
Two options: use our toolchain (eg. make crosstools-i386) or enable the
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case). - iasl (for targets with ACPI support)
- pkg-config
- libssl-dev (openssl)
Optional:
- doxygen (for generating/viewing documentation)
- gdb (for better debugging facilities on some targets)
- ncurses (for
make menuconfigandmake nconfig) - flex and bison (for regenerating parsers)
Building coreboot
Please consult https://www.coreboot.org/Build_HOWTO for details.
Testing coreboot Without Modifying Your Hardware
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Website and Mailing List
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
Copyright and License
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.