d627f7b4f7
Add new block for handling overclocking watchdog. The watchdog is present since Skylake or maybe even earlier so it is safe to use with most of the microarchitectures utilizing intelblocks. The patch adds the common block for initializing and feeding the watchdog. Timeout is defined statically in Kconfig and should be set high enough by the board or SoC Kconfig to let the board boot with full memory training and avoid reset loops. Full training of 128GB DDR5 DIMM memory on AlderLake takes about 5 minutes. Newer SoCs with newer memory technologies and higher RAM capacity may take more. The default has been set to 10 minutes. The patch also adds support for feeding watchdog in driverless mode, i.e. it utilizies periodic SMI to reload the timeout value and restart the watchdog timer. This is optional and selectable by Kconfig option as well. If the option is not enabled, payload and/or software must ensure to keep feeding the watchdog, otherwise the platform will reset. TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets after some time. Enable the watchdog in driverless mode and see the platform no longer resets and periodic SMI keeps feeding the watchdog. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ib494aa0c7581351abca8b496fc5895b2c7cbc5bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/68944 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> |
||
|---|---|---|
| .. | ||
| amd | ||
| cavium | ||
| example/min86 | ||
| intel | ||
| mediatek | ||
| nvidia | ||
| qualcomm | ||
| rockchip | ||
| samsung | ||
| sifive/fu540 | ||
| ti | ||
| ucb/riscv | ||