GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
coreboot-kgpe-d16/src/console/Kconfig

345 lines
8.8 KiB
Plaintext
Raw Normal View History

move single options out of main menu and remove stray "options" Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6244 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-01-05 03:27:53 +01:00
menu "Console"
WIP: Add support for non-8250 built-in UARTs Change-Id: I5b412678bb8993633b3a610315d298cb20c705f3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2011 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-08 02:31:37 +01:00
ARM: Separate the early console (romstage) from the bootblock console. It might be that you want an early console in romstage before RAM is up, but you can't or don't want to support the console all the way back in the bootblock. By making the console in those two different environments configurable seperately that becomes possible. On the 5250 console output as early as the bootblock works, but on the 5420 it only starts working in the ROM stage after clocks have been initialized. Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06 09:21:20 +02:00
config BOOTBLOCK_CONSOLE
bool "Enable early (bootblock) console output."
ARM: Generalize armv7 as arm. There are ARM systems which are essentially heterogeneous multicores where some cores implement a different ARM architecture version than other cores. A specific example is the tegra124 which boots on an ARMv4 coprocessor while most code, including most of the firmware, runs on the main ARMv7 core. To support SOCs like this, the plan is to generalize the ARM architecture so that all versions are available, and an SOC/CPU can then select what architecture variant should be used for each component of the firmware; bootblock, romstage, and ramstage. Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171338 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> ARM: Split out ARMv7 code and make it possible to have other arch versions. We don't always want to use ARMv7 code when building for ARM, so we should separate out the ARMv7 code so it can be excluded, and also make it possible to include code for some other version of the architecture instead, all per build component for cases where we need more than one architecture version at a time. The tegra124 bootblock will ultimately need to be ARMv4, but until we have some ARMv4 code to switch over to we can leave it set to ARMv7. Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7 Reviewed-on: https://chromium-review.googlesource.com/171400 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483) Squashed two related patches for splitting ARM support into general ARM support and ARMv7 specific pieces. Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6782 Tested-by: build bot (Jenkins)
2013-10-01 08:00:33 +02:00
depends on ARCH_ARM
Simplify early / bootblock console code Change-Id: I6b28bb95c7decbe3eed33b5b5a029bee48bbe403 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3691 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-19 22:42:00 +02:00
default n
ARM: Separate the early console (romstage) from the bootblock console. It might be that you want an early console in romstage before RAM is up, but you can't or don't want to support the console all the way back in the bootblock. By making the console in those two different environments configurable seperately that becomes possible. On the 5250 console output as early as the bootblock works, but on the 5420 it only starts working in the ROM stage after clocks have been initialized. Change-Id: I68ae3fcb4d828fa8a328a30001c23c81a4423bb8 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3671 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06 09:21:20 +02:00
help
Use console during the bootblock if supported
console: Squelch console output from AP CPUs in romstage Add Kconfig option SQUELCH_EARLY_SMP and have it enabled by default. Console drivers have unpredictable results if multiple threads attempt to share same resources without spinlock. Serial UARTs have not had huge problems, only distorted output, but those relying on cache-as-ram (CBMEM and usbdebug) may require this. Change-Id: I7f406fdea7b6dc6a341c4da2fab56f7b7ff568b4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3854 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-12 22:29:57 +02:00
config SQUELCH_EARLY_SMP
bool "Squelch AP CPUs from early console."
default y
help
When selected only the BSP CPU will output to early console.
Console drivers have unpredictable behaviour if multiple threads
attempt to share the same resources without a spinlock.
If unsure, say Y.
console: Revise serial console configuration names. The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2299 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-06 14:24:12 +01:00
config CONSOLE_SERIAL
bool "Serial port console output"
default y
uart: Redefine Kconfig options Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13 16:16:22 +01:00
depends on DRIVERS_UART_8250IO || DRIVERS_UART_8250MEM || HAVE_UART_SPECIAL
console: Revise serial console configuration names. The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2299 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-06 14:24:12 +01:00
help
uart: Redefine Kconfig options Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13 16:16:22 +01:00
Send coreboot debug output to a serial port.
make early serial console support more generic This patch makes pre-RAM serial init more generic, particularly for platforms which do not necessarily need cache-as-RAM in order to use the serial console and do not have a standard 8250 serial port. This adds a Kconfig variable to set romstage-* for very early serial console init. The current method assumes that cache-as-RAM should enable this, so to maintain compatibility selecting CACHE_AS_RAM will also select EARLY_SERIAL_CONSOLE. The UART code structure needs some rework, but the use of ROMCC, romstage, and then ramstage makes things complex. uart.h now includes all .h files for all uarts. All 2 of them. This is actually a simplifying change. Change-Id: I089e7af633c227baf3c06c685f005e9d0e4b38ce Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/2086 Tested-by: build bot (Jenkins)
2013-01-01 02:28:43 +01:00
uart: Redefine Kconfig options Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13 16:16:22 +01:00
The type of serial port driver selected based on your configuration is
shown on the following menu line. Supporting multiple different types
of UARTs in one build is not supported.
Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as an example. This newer version reflects the recent changes to further simplify the console code and partly gets rid of some hacks in the previous version. Signed-off-by: Stefan Reinauer <reinauer@google.com> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6544 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-27 01:47:04 +02:00
uart: Redefine Kconfig options Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13 16:16:22 +01:00
if CONSOLE_SERIAL
comment "I/O mapped, 8250-compatible"
depends on DRIVERS_UART_8250IO
Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 17:00:51 +02:00
uart: Redefine Kconfig options Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13 16:16:22 +01:00
comment "memory mapped, 8250-compatible"
depends on DRIVERS_UART_8250MEM
comment "device-specific UART"
console: Revise serial console configuration names. The console drivers (especially serial drivers) in Kconfig were named in different styles. This change will rename configuration names to a better naming style. - EARLY_CONSOLE: Enable output in pre-ram stage. (Renamed from EARLY_SERIAL_CONSOLE because it also supports non-serial) - CONSOLE_SERIAL: Enable serial output console, from one of the serial drivers. (Renamed from SERIAL_CONSOLE because other non-serial drivers are named as CONSOLE_XXX like CONSOLE_CBMEM) - CONSOLE_SERIAL_UART: Device-specific UART driver. (Renamed from CONSOLE_SERIAL_NONSTANDARD_MEM because it may be not memory-mapped) - HAVE_UART_SPECIAL: A dependency for CONSOLE_SERIAL_UART. Verified to boot on x86/qemu and armv7/snow, and still seeing console messages in romstage for both platforms. Change-Id: I4bea3c8fea05bbb7d78df6bc22f82414ac66f973 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/2299 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-06 14:24:12 +01:00
depends on HAVE_UART_SPECIAL
WIP: Add support for non-8250 built-in UARTs Change-Id: I5b412678bb8993633b3a610315d298cb20c705f3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2011 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-08 02:31:37 +01:00
uart: Support multiple ports The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-14 21:28:29 +01:00
config UART_FOR_CONSOLE
console: Fix UART selection prompt Without this change, removal of default UART_FOR_CONSOLE entries under mainboard/ Kconfig will remove this option entirely from created .config file. Change-Id: I11422ddb8c51abca177f999936c995ae0c91c459 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5626 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-04-30 23:02:43 +02:00
int "Index for UART port to use for console"
uart: Support multiple ports The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-14 21:28:29 +01:00
default 0
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
uart: Support multiple ports The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-14 21:28:29 +01:00
# FIXME: Early programming in romstage is incorrect as we should
# program different LDN to actually change the physical port.
Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 17:00:51 +02:00
config TTYS0_BASE
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
hex
UART 8250: Unconditionally provide register constants and use UART8250 prefix. The register indexes and bitfield masks were guarded by the UART8250 config options, but it might be (is) necessary to use them in a driver that is UART8250 like without actually using the 8250 driver itself. To avoid any name collision with other drivers, also change the constant prefix from UART_ to UART8250_. Change-Id: Ie606d9e0329132961c3004688176204a829569dc Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171336 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit a93900be8d8a8260db49e30737608f9161fbf249) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6715 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-10-01 06:25:49 +02:00
depends on DRIVERS_UART
uart: Support multiple ports The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-14 21:28:29 +01:00
default 0x3f8 if UART_FOR_CONSOLE = 0
default 0x2f8 if UART_FOR_CONSOLE = 1
default 0x3e8 if UART_FOR_CONSOLE = 2
default 0x2e8 if UART_FOR_CONSOLE = 3
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
help
uart: Support multiple ports The port for console remains to be a compile time constant. The Kconfig option is changed to select an UART port with index to avoid putting map of UART base addresses in Kconfigs. With this change it is possible to have other than debug console on different UART port. Change-Id: Ie1845a946f8d3b2604ef5404edb31b2e811f3ccd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5342 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-14 21:28:29 +01:00
Map the COM port number to the respective I/O port.
Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 17:00:51 +02:00
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
choice
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
prompt "Baud rate"
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
default CONSOLE_SERIAL_115200
config CONSOLE_SERIAL_115200
bool "115200"
help
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
Set serial port Baud rate to 115200.
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
config CONSOLE_SERIAL_57600
bool "57600"
help
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
Set serial port Baud rate to 57600.
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
config CONSOLE_SERIAL_38400
bool "38400"
help
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
Set serial port Baud rate to 38400.
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
config CONSOLE_SERIAL_19200
bool "19200"
help
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
Set serial port Baud rate to 19200.
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
config CONSOLE_SERIAL_9600
bool "9600"
help
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
Set serial port Baud rate to 9600.
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
endchoice
WIP: Add support for non-8250 built-in UARTs Change-Id: I5b412678bb8993633b3a610315d298cb20c705f3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2011 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-12-08 02:31:37 +01:00
#FIXME(dhendrix): Change name to SERIAL_BAUD? (Stefan sayz: yes!!)
Make COM port selection and BAUD rate a "choice" for better usability. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4798 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-17 00:39:55 +02:00
config TTYS0_BAUD
int
default 115200 if CONSOLE_SERIAL_115200
default 57600 if CONSOLE_SERIAL_57600
default 38400 if CONSOLE_SERIAL_38400
default 19200 if CONSOLE_SERIAL_19200
default 9600 if CONSOLE_SERIAL_9600
help
Various smaller console option fixes as suggested by Peter Stuge: - Change "COM port" to "Serial port". - Also show the I/O port of the serial ports. Keep "COM1/ttyS0" though for easy recognition by the average user. - Change BAUD to Baud. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4869 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-27 00:52:34 +01:00
Map the Baud rates to an integer.
Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 17:00:51 +02:00
Various Kconfig fixes and improvements: - Add helps texts to multiple user-visible Kconfig options. - Improve some menu and option names. - PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down (instead of up) when changing "no payload" to "ELF payload" (more intuitive, IMHO). - s/cbfs/cbfstool/. - Add some TODO items where needed. - Put GDB_STUB in a "Debugging" menu, no options should be top-level. There'll be more debug options later, I'm pretty sure. - Start converting help texts which are not user-visible to #-comments. - Re-order some options for more intuitive menus. - Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them. - "Maximum reboot count" should proabably not be user-selectable, or at most if CONFIG_EXPERT (yet to be added) is enabled. It does definately not need its own "Misc options" menu. - Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to run option ROMs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07 18:15:40 +02:00
# TODO: Allow user-friendly selection of settings other than 8n1.
Various fixes to Kconfig: All kconfig-boards should have a complete set of variables now, though they might still have the wrong values. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-06 22:48:07 +02:00
config TTYS0_LCS
int
default 3
uart: Redefine Kconfig options Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-13 16:16:22 +01:00
depends on DRIVERS_UART_8250IO || DRIVERS_UART_8250MEM
endif # CONSOLE_SERIAL
Various fixes to Kconfig: All kconfig-boards should have a complete set of variables now, though they might still have the wrong values. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4728 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-06 22:48:07 +02:00
spkmodem console Change-Id: Ie497e4c8da05001ffe67c4a541bd24aa859ac0e2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/2987 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-30 02:02:13 +01:00
config SPKMODEM
bool "spkmodem (console on speaker) console output"
default n
help
Send coreboot debug output through speaker
usbdebug: Move Kconfig under drivers/usb This menu may become a bit more complicated with addition of new USB hardware so move it out of console/. Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25 11:06:14 +01:00
config CONSOLE_USB
bool "USB dongle console output"
depends on USBDEBUG
usbdebug: Support choice of EHCI controller Nowadays, chipsets or boards do not only have one USB port with the capabilities of a debug port but several ones. Some of these ports are easier accessible than others, so making them configurable is also necessary. This change adds infrastructure to switch between EHCI controllers, but does not implement it for any chipset. Change-Id: I079643870104fbc64091a54e1bfd56ad24422c9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3438 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-08-15 15:27:06 +02:00
default n
help
usbdebug: Move Kconfig under drivers/usb This menu may become a bit more complicated with addition of new USB hardware so move it out of console/. Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25 11:06:14 +01:00
Send coreboot debug output to USB.
usbdebug: Allow an USB hub on the debug dongle Some development kits with USB 2.0 HS OTG have an USB hub instead of being directly connected to the USB host/device controller. Send the necessary initialisation sequence, using HUB CLASS requests of PORT_POWER and PORT_RESET to enable a pre-selected port number where a device supporting debug descriptor is located. This also adds the Kconfig option for BeagleBone. Change-Id: I7a5d0ba0962a9ca06bf3196232ed4a03bdfb2b06 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3925 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-08-23 22:33:16 +02:00
usbdebug: Move Kconfig under drivers/usb This menu may become a bit more complicated with addition of new USB hardware so move it out of console/. Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5307 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25 11:06:14 +01:00
Configuration for USB hardware is under menu Generic Drivers.
usbdebug: Allow an USB hub on the debug dongle Some development kits with USB 2.0 HS OTG have an USB hub instead of being directly connected to the USB host/device controller. Send the necessary initialisation sequence, using HUB CLASS requests of PORT_POWER and PORT_RESET to enable a pre-selected port number where a device supporting debug descriptor is located. This also adds the Kconfig option for BeagleBone. Change-Id: I7a5d0ba0962a9ca06bf3196232ed4a03bdfb2b06 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3925 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-08-23 22:33:16 +02:00
Various Kconfig fixes and improvements: - Add helps texts to multiple user-visible Kconfig options. - Improve some menu and option names. - PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down (instead of up) when changing "no payload" to "ELF payload" (more intuitive, IMHO). - s/cbfs/cbfstool/. - Add some TODO items where needed. - Put GDB_STUB in a "Debugging" menu, no options should be top-level. There'll be more debug options later, I'm pretty sure. - Start converting help texts which are not user-visible to #-comments. - Re-order some options for more intuitive menus. - Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them. - "Maximum reboot count" should proabably not be user-selectable, or at most if CONFIG_EXPERT (yet to be added) is enabled. It does definately not need its own "Misc options" menu. - Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to run option ROMs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07 18:15:40 +02:00
# TODO: Deps?
# TODO: Improve description.
Printing coreboot debug messages on VGA console is pretty much useless, since initializing VGA happens pretty much as the last thing before starting the payload. Hence, drop VGA console support, as we did in coreboot v3. - Drop VGA and BTEXT console support. Console is meant to be debugging only, and by the time graphics comes up 99% of the risky stuff has already happened. Note: This patch does not remove hardware init but only the actual output functionality. The ragexl driver needs some extra love, but that's for another day - factor out die() and post() - drop some leftover RAMBASE < 0x100000 checks. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: QingPei Wang<wangqingpei@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6111 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-11-22 09:09:50 +01:00
config ONBOARD_VGA_IS_PRIMARY
Various Kconfig fixes and improvements: - Add helps texts to multiple user-visible Kconfig options. - Improve some menu and option names. - PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down (instead of up) when changing "no payload" to "ELF payload" (more intuitive, IMHO). - s/cbfs/cbfstool/. - Add some TODO items where needed. - Put GDB_STUB in a "Debugging" menu, no options should be top-level. There'll be more debug options later, I'm pretty sure. - Start converting help texts which are not user-visible to #-comments. - Re-order some options for more intuitive menus. - Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them. - "Maximum reboot count" should proabably not be user-selectable, or at most if CONFIG_EXPERT (yet to be added) is enabled. It does definately not need its own "Misc options" menu. - Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to run option ROMs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-07 18:15:40 +02:00
bool "Use onboard VGA as primary video device"
tables.diff: Add Kconfig dialogues for ACPI, MP_TABLE, ... Kconfig_bools.diff: Change some more ints to bools, change some default values. xip_size.diff: Make XIP_SIZE + XIP_BASE add up to 4GB. smp.diff: set CONFIG_SMP based on MAX_CPUS. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4655 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-09-22 20:49:08 +02:00
default n
help
If not selected, the last adapter found will be used.
Add support for the console over Ethernet (through PCI NE2000). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5666 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-16 22:02:09 +02:00
config CONSOLE_NE2K
bool "Network console over NE2000 compatible Ethernet adapter"
default n
help
Send coreboot debug output to a Ethernet console, it works
same way as Linux netconsole, packets are received to UDP
port 6666 on IP/MAC specified with options bellow.
Use following netcat command: nc -u -l -p 6666
config CONSOLE_NE2K_DST_MAC
depends on CONSOLE_NE2K
string "Destination MAC address of remote system"
default "00:13:d4:76:a2:ac"
help
Type in either MAC address of logging system or MAC address
of the router.
config CONSOLE_NE2K_DST_IP
depends on CONSOLE_NE2K
string "Destination IP of logging system"
default "10.0.1.27"
help
src/.../Kconfig: various small fixes to texts Fixed spelling and added empty lines to separate the help from the text automatically added during make menuconfig. Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6313 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-22 18:00:56 +02:00
This is IP address of the system running for example
Add support for the console over Ethernet (through PCI NE2000). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5666 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-16 22:02:09 +02:00
netcat command to dump the packets.
config CONSOLE_NE2K_SRC_IP
depends on CONSOLE_NE2K
Fix some wrong capitalizations, reformat comments, fix a typo. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5829 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-23 20:29:40 +02:00
string "IP address of coreboot system"
Add support for the console over Ethernet (through PCI NE2000). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5666 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-16 22:02:09 +02:00
default "10.0.1.253"
help
Fix some wrong capitalizations, reformat comments, fix a typo. Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5829 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-09-23 20:29:40 +02:00
This is the IP of the coreboot system
Add support for the console over Ethernet (through PCI NE2000). Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Cristian Magherusan-Stanciu <cristi.magherusan@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5666 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-07-16 22:02:09 +02:00
config CONSOLE_NE2K_IO_PORT
depends on CONSOLE_NE2K
hex "NE2000 adapter fixed IO port address"
default 0xe00
help
This is the IO port address for the IO port
on the card, please select some non-conflicting region,
32 bytes of IO spaces will be used (and align on 32 bytes
boundary, qemu needs broader align)
CBMEM CONSOLE: Add config option for CBMEM stored console log. Some experiments have demonstrated that total amount of text generated by coreboot console when BIOS_SPEW level is enabled exceeds 40KB. Console output generated before DRAM is initialized can exceed 2KB. This patch introduces the new configuration option and assigns adequate default values to cache based and DRAM based console buffers. BUG=chrome-os-partner:4200 TEST=manual . run the following commands in the root directory cp config.stumpy .config make menuconfig . enable the new option (Console->Send console output to a CBMEM buffer) . save the configuration Observe the following settings added to the config: +CONFIG_CONSOLE_CBMEM=y +CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0xae00 +CONFIG_CONSOLE_CAR_BUFFER_SIZE=0xc00 Change-Id: I209603f516244ae136631e6281ba21ebc6fb1710 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://gerrit-int.chromium.org/5855 Tested-by: Vadim Bendebury <vbendeb@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-28 22:51:30 +02:00
config CONSOLE_CBMEM
arm: Remove CAR_MIGRATE Kconfig and associated cruft This is essentially a revert of commit 10bd772d. The CAR_MIGRATE mechanism is only useful to migrate variables from a special region (e.g. cache as RAM) into DRAM-backed CBMEM between different parts of the romstage (it does not persist into ramstage). Since ARM devices use SRAM for which there is no reason to become inaccessible in later parts of the romstage, this mechanism isn't useful for them. Removing it makes the romstage.ld script much simpler, which has the nice side-effect of putting the BSS at the end of the memory image (so that cbfstool can actually figure out that it doesn't need to be part of the ROM image). Old-Change-Id: I50e91d8bd51b5deb19446d9da48699edecbef6ea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/176761 Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ebfd698e57c902e2f39a0cfc1bc2b02665e47ec6) console: Make cbmem depend on x86. The cbmem implementation isn't supported on anything other than x86 right now and actually causes memory corruption on ARM machines. Until that's fixed, this will prevent people from turning it on and causing hard to track down errors. Old-Change-Id: I00e8aacf008acfe2f76d4eab82570f7c1cc89cab Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/191107 Reviewed-by: Julius Werner <jwerner@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit e54f16e346a7f2c66d802fb78a6b24e53b732b83) Squashed two related commits for cbmem support on arm. Change-Id: I2be48cea348ee5dc8ca3632d743500aa111bab08 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6888 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2013-11-14 01:06:34 +01:00
depends on ARCH_X86
CBMEM CONSOLE: Add config option for CBMEM stored console log. Some experiments have demonstrated that total amount of text generated by coreboot console when BIOS_SPEW level is enabled exceeds 40KB. Console output generated before DRAM is initialized can exceed 2KB. This patch introduces the new configuration option and assigns adequate default values to cache based and DRAM based console buffers. BUG=chrome-os-partner:4200 TEST=manual . run the following commands in the root directory cp config.stumpy .config make menuconfig . enable the new option (Console->Send console output to a CBMEM buffer) . save the configuration Observe the following settings added to the config: +CONFIG_CONSOLE_CBMEM=y +CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0xae00 +CONFIG_CONSOLE_CAR_BUFFER_SIZE=0xc00 Change-Id: I209603f516244ae136631e6281ba21ebc6fb1710 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://gerrit-int.chromium.org/5855 Tested-by: Vadim Bendebury <vbendeb@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-28 22:51:30 +02:00
bool "Send console output to a CBMEM buffer"
default n
help
Enable this to save the console output in a CBMEM buffer. This would
allow to see coreboot console output from Linux space.
config CONSOLE_CBMEM_BUFFER_SIZE
depends on CONSOLE_CBMEM
hex "Room allocated for console output in CBMEM"
cbmemc: Bump default to 128K board_status shows that truncation of few KiB is pretty common. So bump this value. Change-Id: I78a16974846a59ee4eae782380e6d01d2fa324f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6902 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-13 20:55:58 +02:00
default 0x20000
CBMEM CONSOLE: Add config option for CBMEM stored console log. Some experiments have demonstrated that total amount of text generated by coreboot console when BIOS_SPEW level is enabled exceeds 40KB. Console output generated before DRAM is initialized can exceed 2KB. This patch introduces the new configuration option and assigns adequate default values to cache based and DRAM based console buffers. BUG=chrome-os-partner:4200 TEST=manual . run the following commands in the root directory cp config.stumpy .config make menuconfig . enable the new option (Console->Send console output to a CBMEM buffer) . save the configuration Observe the following settings added to the config: +CONFIG_CONSOLE_CBMEM=y +CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0xae00 +CONFIG_CONSOLE_CAR_BUFFER_SIZE=0xc00 Change-Id: I209603f516244ae136631e6281ba21ebc6fb1710 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://gerrit-int.chromium.org/5855 Tested-by: Vadim Bendebury <vbendeb@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-28 22:51:30 +02:00
help
Space allocated for console output storage in CBMEM. The default
cbmemc: Bump default to 128K board_status shows that truncation of few KiB is pretty common. So bump this value. Change-Id: I78a16974846a59ee4eae782380e6d01d2fa324f2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6902 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-09-13 20:55:58 +02:00
value (128K or 0x20000 bytes) is large enough to accommodate
CBMEM CONSOLE: Add config option for CBMEM stored console log. Some experiments have demonstrated that total amount of text generated by coreboot console when BIOS_SPEW level is enabled exceeds 40KB. Console output generated before DRAM is initialized can exceed 2KB. This patch introduces the new configuration option and assigns adequate default values to cache based and DRAM based console buffers. BUG=chrome-os-partner:4200 TEST=manual . run the following commands in the root directory cp config.stumpy .config make menuconfig . enable the new option (Console->Send console output to a CBMEM buffer) . save the configuration Observe the following settings added to the config: +CONFIG_CONSOLE_CBMEM=y +CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0xae00 +CONFIG_CONSOLE_CAR_BUFFER_SIZE=0xc00 Change-Id: I209603f516244ae136631e6281ba21ebc6fb1710 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://gerrit-int.chromium.org/5855 Tested-by: Vadim Bendebury <vbendeb@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-28 22:51:30 +02:00
even the BIOS_SPEW level.
config CONSOLE_CAR_BUFFER_SIZE
depends on CONSOLE_CBMEM
Fix typos in src/console/Kconfig - cash -> Cache - make the new size of the cbmem console buffer the default Change-Id: Ia906077257e93622ad56bc54a42f8184ade78b29 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/726 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-05 01:21:17 +02:00
hex "Room allocated for console output in Cache as RAM"
CBMEM CONSOLE: Add config option for CBMEM stored console log. Some experiments have demonstrated that total amount of text generated by coreboot console when BIOS_SPEW level is enabled exceeds 40KB. Console output generated before DRAM is initialized can exceed 2KB. This patch introduces the new configuration option and assigns adequate default values to cache based and DRAM based console buffers. BUG=chrome-os-partner:4200 TEST=manual . run the following commands in the root directory cp config.stumpy .config make menuconfig . enable the new option (Console->Send console output to a CBMEM buffer) . save the configuration Observe the following settings added to the config: +CONFIG_CONSOLE_CBMEM=y +CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0xae00 +CONFIG_CONSOLE_CAR_BUFFER_SIZE=0xc00 Change-Id: I209603f516244ae136631e6281ba21ebc6fb1710 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://gerrit-int.chromium.org/5855 Tested-by: Vadim Bendebury <vbendeb@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2011-09-28 22:51:30 +02:00
default 0xc00
help
Console is used before RAM is initialized. This is the room reserved
in the DCACHE based RAM to keep console output before it can be
saved in a CBMEM buffer. 3K bytes should be enough even for the
BIOS_SPEW level.
console: add support for QEMU's debugcon Add support for sending debug output to an I/O port. It can be used together with QEMU's isa-debugcon driver to log the coreboot output to a file. The port is configurable and defaults to 0x402 which has established as the de facto standard. For example, SeaBIOS+OVMF [1] use that one too. [1] http://www.linux-kvm.org/page/OVMF Open Virtual Machine Firmware Change-Id: I0803f7fc70030242f80003e25c9449c37d71975e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-29 13:06:22 +02:00
console: add qemu prefix to debugcon Change-Id: Ibcc0a94638c022a76cd3c2e3387af6e1ab757ccb Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-30 10:32:31 +02:00
config CONSOLE_QEMU_DEBUGCON
console: add support for QEMU's debugcon Add support for sending debug output to an I/O port. It can be used together with QEMU's isa-debugcon driver to log the coreboot output to a file. The port is configurable and defaults to 0x402 which has established as the de facto standard. For example, SeaBIOS+OVMF [1] use that one too. [1] http://www.linux-kvm.org/page/OVMF Open Virtual Machine Firmware Change-Id: I0803f7fc70030242f80003e25c9449c37d71975e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-29 13:06:22 +02:00
bool "QEMU debug console output"
depends on BOARD_EMULATION_QEMU_X86
default y
help
Send coreboot debug output to QEMU's isa-debugcon device:
qemu-system-x86_64 \
-chardev file,id=debugcon,path=/dir/file.log \
-device isa-debugcon,iobase=0x402,chardev=debugcon
console: add qemu prefix to debugcon Change-Id: Ibcc0a94638c022a76cd3c2e3387af6e1ab757ccb Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-30 10:32:31 +02:00
config CONSOLE_QEMU_DEBUGCON_PORT
console: add support for QEMU's debugcon Add support for sending debug output to an I/O port. It can be used together with QEMU's isa-debugcon driver to log the coreboot output to a file. The port is configurable and defaults to 0x402 which has established as the de facto standard. For example, SeaBIOS+OVMF [1] use that one too. [1] http://www.linux-kvm.org/page/OVMF Open Virtual Machine Firmware Change-Id: I0803f7fc70030242f80003e25c9449c37d71975e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-29 13:06:22 +02:00
hex "QEMU debug console port"
console: add qemu prefix to debugcon Change-Id: Ibcc0a94638c022a76cd3c2e3387af6e1ab757ccb Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-30 10:32:31 +02:00
depends on CONSOLE_QEMU_DEBUGCON
console: add support for QEMU's debugcon Add support for sending debug output to an I/O port. It can be used together with QEMU's isa-debugcon driver to log the coreboot output to a file. The port is configurable and defaults to 0x402 which has established as the de facto standard. For example, SeaBIOS+OVMF [1] use that one too. [1] http://www.linux-kvm.org/page/OVMF Open Virtual Machine Firmware Change-Id: I0803f7fc70030242f80003e25c9449c37d71975e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3331 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-29 13:06:22 +02:00
default 0x402
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
choice
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
prompt "Default console log level"
default DEFAULT_CONSOLE_LOGLEVEL_8
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_8
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "8: SPEW"
help
Way too many details.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_7
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "7: DEBUG"
help
Debug-level messages.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_6
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "6: INFO"
help
Informational messages.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_5
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "5: NOTICE"
help
Normal but significant conditions.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_4
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "4: WARNING"
help
Warning conditions.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_3
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "3: ERR"
help
Error conditions.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_2
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "2: CRIT"
help
Critical conditions.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_1
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "1: ALERT"
help
Action must be taken immediately.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
config DEFAULT_CONSOLE_LOGLEVEL_0
Change console code to emit SPEW with DEFAULT_CONSOLE_LOGLEVEL==8. Make MAXIMUM_CONSOLE_LOGLEVEL >= DEFAULT_CONSOLE_LOGLEVEL. Signed-off-by: Myles Watson <mylesgw@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4794 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-16 21:29:45 +02:00
bool "0: EMERG"
help
System is unusable.
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
endchoice
Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 17:00:51 +02:00
config DEFAULT_CONSOLE_LOGLEVEL
Make console maximum/default log level a choice option. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4758 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-10-11 15:35:24 +02:00
int
default 0 if DEFAULT_CONSOLE_LOGLEVEL_0
default 1 if DEFAULT_CONSOLE_LOGLEVEL_1
default 2 if DEFAULT_CONSOLE_LOGLEVEL_2
default 3 if DEFAULT_CONSOLE_LOGLEVEL_3
default 4 if DEFAULT_CONSOLE_LOGLEVEL_4
default 5 if DEFAULT_CONSOLE_LOGLEVEL_5
default 6 if DEFAULT_CONSOLE_LOGLEVEL_6
default 7 if DEFAULT_CONSOLE_LOGLEVEL_7
default 8 if DEFAULT_CONSOLE_LOGLEVEL_8
help
Map the log level config names to an integer.
Kconfig! Works on Kontron, qemu, and serengeti. Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de> tested on abuild only. Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4534 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2009-08-12 17:00:51 +02:00
add CONFIG_NO_POST as it is used in the code, and move it together with CONFIG_SERIAL_POST Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5326 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-30 11:57:28 +02:00
config NO_POST
bool "Don't show any POST codes"
default n
Add support for storing POST codes in CMOS This will use 3 bytes of CMOS to keep track of the POST code for the current boot while also leaving a record of the previous boot. The active bank is switched early in the bootblock. Test: 1) clear cmos 2) reboot 3) use "mosys nvram dump" to verify that the first byte contains 0x80 and the second byte contains 0xF8 4) powerd_suspend and then resume 5) use "mosys nvram dump" to verify that the first byte contains 0x81 and the second byte contains 0xFD Change-Id: I1ee6bb2dac053018f3042ab5a0b26c435dbfd151 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-10 04:09:56 +02:00
config CMOS_POST
bool "Store post codes in CMOS for debugging"
Disable CMOS_POST and IO_POST on non-PC80 systems Because they use outb instructions, they are bound to fail on non-PC80 systems like ARM. Change-Id: I679ac6c0964c06c369cc90556529bb6f629d56f9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1974 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2012-12-06 23:25:27 +01:00
depends on !NO_POST && PC80_SYSTEM
Add support for storing POST codes in CMOS This will use 3 bytes of CMOS to keep track of the POST code for the current boot while also leaving a record of the previous boot. The active bank is switched early in the bootblock. Test: 1) clear cmos 2) reboot 3) use "mosys nvram dump" to verify that the first byte contains 0x80 and the second byte contains 0xF8 4) powerd_suspend and then resume 5) use "mosys nvram dump" to verify that the first byte contains 0x81 and the second byte contains 0xFD Change-Id: I1ee6bb2dac053018f3042ab5a0b26c435dbfd151 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/1743 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-09-10 04:09:56 +02:00
default n
help
If enabled, coreboot will store post codes in CMOS and switch between
two offsets on each boot so the last post code in the previous boot
can be retrieved. This uses 3 bytes of CMOS.
config CMOS_POST_OFFSET
hex "Offset into CMOS to store POST codes"
depends on CMOS_POST
default 0
help
If CMOS_POST is enabled then an offset into CMOS must be provided.
If CONFIG_HAVE_OPTION_TABLE is enabled then it will use the value
defined in the mainboard option table.
Extend CMOS POST code logging to store extra data This can be used to indicate sub-state within a POST code range which can assist in debugging BIOS hangs. For example this can be used to indicate which device is about to be initialized so if the system hangs while talking to that device it can be identified. Change-Id: I2f8155155f09fe9e242ebb7204f0b5cba3a1fa1e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/58104 Reviewed-on: http://review.coreboot.org/4229 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-10 19:21:41 +02:00
config CMOS_POST_EXTRA
bool "Store extra logging info into CMOS"
depends on CMOS_POST
default n
help
This will enable extra logging of work that happens between post
codes into CMOS for debug. This uses an additional 8 bytes of CMOS.
src/console/Kconfig: Fix choice for showing POST codes on console Use CONSOLE_POST because the preprocessor conditional in post_code() in src/console/post.c depends on it, while POST_IO is used in another conditional for sending the codes to an I/O port. Change-Id: Ia044cffb5f0aad0f8b2bb04faa12df11a705757a Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6416 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-30 12:23:35 +02:00
config CONSOLE_POST
Make POST device configurable. Change-Id: If92b50ab3888518228d2d3b76f5c50c4aef968dd Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-11 16:36:21 +01:00
bool "Show POST codes on the debug console"
depends on !NO_POST
default n
help
If enabled, coreboot will additionally print POST codes (which are
usually displayed using a so-called "POST card" ISA/PCI/PCI-E
device) on the debug console.
config POST_DEVICE
bool "Send POST codes to an external device"
depends on !NO_POST
default y
choice
prompt "Device to send POST codes to"
depends on POST_DEVICE
default POST_DEVICE_NONE
config POST_DEVICE_NONE
bool "None"
config POST_DEVICE_LPC
bool "LPC"
config POST_DEVICE_PCI_PCIE
bool "PCI/PCIe"
endchoice
config POST_IO
Make POST codes written to IO port optional This adds more configurability to POST codes. The current assumption is that POST codes should be written to an IO port (e.g. LPC) if POST codes are enabled. This changes the assumption so that POST codes can be written to the serial console without being written to an IO port. This enables POST codes by default using "default y" to avoid changing current behavior. Change-Id: I3db91c358ccb1557096983c4d07f70b2e872c4b3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1685 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05 21:34:09 +01:00
bool "Send POST codes to an IO port"
Make POST device configurable. Change-Id: If92b50ab3888518228d2d3b76f5c50c4aef968dd Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-11 16:36:21 +01:00
depends on PC80_SYSTEM && !NO_POST
Make POST codes written to IO port optional This adds more configurability to POST codes. The current assumption is that POST codes should be written to an IO port (e.g. LPC) if POST codes are enabled. This changes the assumption so that POST codes can be written to the serial console without being written to an IO port. This enables POST codes by default using "default y" to avoid changing current behavior. Change-Id: I3db91c358ccb1557096983c4d07f70b2e872c4b3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1685 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05 21:34:09 +01:00
default y
help
If enabled, POST codes will be written to an IO port.
add CONFIG_NO_POST as it is used in the code, and move it together with CONFIG_SERIAL_POST Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5326 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-03-30 11:57:28 +02:00
Make POST device configurable. Change-Id: If92b50ab3888518228d2d3b76f5c50c4aef968dd Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4561 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-03-11 16:36:21 +01:00
config POST_IO_PORT
depends on POST_IO
Make POST codes written to IO port optional This adds more configurability to POST codes. The current assumption is that POST codes should be written to an IO port (e.g. LPC) if POST codes are enabled. This changes the assumption so that POST codes can be written to the serial console without being written to an IO port. This enables POST codes by default using "default y" to avoid changing current behavior. Change-Id: I3db91c358ccb1557096983c4d07f70b2e872c4b3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1685 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05 21:34:09 +01:00
hex "IO port for POST codes"
default 0x80
help
POST codes on x86 are typically written to the LPC bus on port
src/.../Kconfig: various small fixes to texts Fixed spelling and added empty lines to separate the help from the text automatically added during make menuconfig. Change-Id: I6eee2c86e30573deb8cf0d42fda8b8329e1156c7 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6313 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-07-22 18:00:56 +02:00
0x80. However, it may be desirable to change the port number
Make POST codes written to IO port optional This adds more configurability to POST codes. The current assumption is that POST codes should be written to an IO port (e.g. LPC) if POST codes are enabled. This changes the assumption so that POST codes can be written to the serial console without being written to an IO port. This enables POST codes by default using "default y" to avoid changing current behavior. Change-Id: I3db91c358ccb1557096983c4d07f70b2e872c4b3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/1685 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-05 21:34:09 +01:00
depending on the presence of coprocessors/microcontrollers or if the
platform does not support IO in the conventional x86 manner.
endmenu