coreboot-kgpe-d16/Makefile.inc

1331 lines
52 KiB
PHP
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
ifneq ($(NOCOMPILE),1)
GIT:=$(shell git -C "$(top)" rev-parse --git-dir 1>/dev/null 2>&1 \
&& command -v git)
else
GIT:=
endif
#######################################################################
# normalize Kconfig variables in a central place
CONFIG_CBFS_PREFIX:=$(call strip_quotes,$(CONFIG_CBFS_PREFIX))
CONFIG_FMDFILE:=$(call strip_quotes,$(CONFIG_FMDFILE))
CONFIG_DEVICETREE:=$(call strip_quotes, $(CONFIG_DEVICETREE))
CONFIG_OVERRIDE_DEVICETREE:=$(call strip_quotes, $(CONFIG_OVERRIDE_DEVICETREE))
CONFIG_CHIPSET_DEVICETREE:=$(call strip_quotes, $(CONFIG_CHIPSET_DEVICETREE))
CONFIG_MEMLAYOUT_LD_FILE:=$(call strip_quotes, $(CONFIG_MEMLAYOUT_LD_FILE))
#######################################################################
# misleadingly named, this is the coreboot version
ifeq ($(KERNELVERSION),)
ifeq ($(BUILD_TIMELESS),1)
KERNELVERSION := -TIMELESS--LESSTIME-
else
KERNELVERSION := $(strip $(if $(GIT),\
$(shell git describe --dirty --always || git describe),\
$(if $(wildcard $(top)/.coreboot-version),\
$(shell cat $(top)/.coreboot-version),\
coreboot-unknown$(KERNELREVISION))))
endif
endif
COREBOOT_EXPORTS += KERNELVERSION
#######################################################################
# Basic component discovery
MAINBOARDDIR=$(call strip_quotes,$(CONFIG_MAINBOARD_DIR))
VARIANT_DIR:=$(call strip_quotes,$(CONFIG_VARIANT_DIR))
Makefile.inc: Add CARRIER_DIR to component discovery The idea is to split the “mainboard” category into “variants” and “carrierboards”, in the case when we use the COMe module together with the Carrier Board instead of a single monolithic motherboard. Previously, the “variants” category defined the type of motherboard, which has a number of differences from the base one, for example, it differed in the size or type of memory, and in the configuration of the interfaces. Thus, there is no need to create a separate directory in src/mainboard for a board that is similar in configuration to the base board. But for a COMe module, “variants” contains different variants of only this module, and the entire Carrier Board configuration is allocated to a separate category - “carrierboards”, and each of the variants can be used with one of the many boards in “carrierboards”. For example, in the case of the Kontron mAL10 COMe module, variant refers to the COMe-mAL10 or COMe-m4AL10 module type. They differ in the type of memory (DDR3L or DDR4), and maybe they differ in some chips (see more in https://www.kontron.com/products). However, all variants contain the same type of processor/SoC. The "carrierboards" directory can be able contain both the Kontron's Evalution carrier boards (such as Eval Carrier2 T10 and COMe Ref.Carrier-i T10 TNI) and third party vendor backplanes that are compatible with the COMe modules from “variants”. Thus, the src/mainboard/<module-name> directory contains the common configuration code for all variants from src/mainboard/<module-name>/ variants, which can be supplemented/redefined with a configuration from src/mainboard/<module-name>/carrierboard/<vendor-carrierboard-name>. This architectural solution will be able to systematize and simplify understanding of the code structure for COMe modules and will allow vendors to add/maintain their code in a separate directory. This work is also the first step towards to union of all carrierboards into the global category in src/carrierboard on a par with all boards from src/mainboard. The patch takes this into account in the build system and adds CARRIER_DIR component to use the “carrierboards” category, as it has done for VARIANT_DIR. TEST = Build ROM image for Kontron mAL10 COMe module together with T10 TNI carrier board (https://review.coreboot.org/c/coreboot/+/39133). Change-Id: Ic6b2f8994b1293ae6f5bda8c9cc95128ba0abf7a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42609 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-20 16:26:21 +02:00
CARRIER_DIR:=$(call strip_quotes,$(CONFIG_CARRIER_DIR))
COREBOOT_EXPORTS += MAINBOARDDIR VARIANT_DIR CARRIER_DIR
## Final build results, which CBFSTOOL uses to create the final
## rom image file, are placed under $(objcbfs).
## These typically have suffixes .debug .elf .bin and .map
objcbfs := $(obj)/cbfs/$(CONFIG_CBFS_PREFIX)
additional-dirs += $(objcbfs)
COREBOOT_EXPORTS += objcbfs
## Based on the active configuration, Makefile conditionally collects
## the required assembly includes and saves them in a file.
## Such files that do not have a clear one-to-one relation to a source
## file under src/ are placed and built under $(objgenerated)
objgenerated := $(obj)/generated
additional-dirs += $(objgenerated)
COREBOOT_EXPORTS += objgenerated
## CCACHE_EXTRAFILES can be set by individual rules to help CCACHE
## discover dependencies it might not notice on its own (e.g. asm (".incbin")).
COREBOOT_EXPORTS += CCACHE_EXTRAFILES
#######################################################################
# root rule to resolve if in build mode (ie. configuration exists)
real-target: $(obj)/config.h coreboot files_added
coreboot: $(obj)/coreboot.rom $(obj)/cbfstool $(obj)/rmodtool $(obj)/ifwitool $(obj)/cse_fpt $(obj)/cse_serger
# This target can be used in site local to run scripts or additional
# targets after the build completes by creating a Makefile.inc in the
# site-local directory with a target named 'build_complete::'
build_complete:: coreboot
printf "\nBuilt %s (%s)\n" $(MAINBOARDDIR) $(CONFIG_MAINBOARD_PART_NUMBER)
if [ -f "$(CCACHE_STATSLOG)" ]; then \
printf "\nccache statistics\n"; \
$(CCACHE) --show-log-stats -v; \
fi
# This target can be used to run rules after all files were added to CBFS,
# for example to process FMAP regions or the entire image.
files_added:: build_complete
#######################################################################
# our phony targets
PHONY+= clean-abuild coreboot check-style build_complete
#######################################################################
# root source directories of coreboot
subdirs-y := src/lib src/commonlib/ src/console src/device src/acpi src/superio/common
subdirs-$(CONFIG_EC_ACPI) += src/ec/intel
subdirs-y += src/ec/acpi $(wildcard src/ec/*/*) $(wildcard src/southbridge/*/*)
subdirs-y += $(wildcard src/soc/*) $(wildcard src/soc/*/common) $(filter-out $(wildcard src/soc/*/common),$(wildcard src/soc/*/*))
subdirs-y += $(wildcard src/northbridge/*/*)
subdirs-y += $(filter-out src/superio/common,$(wildcard src/superio/*)) $(wildcard src/superio/*/*)
subdirs-y += $(wildcard src/drivers/*) $(wildcard src/drivers/*/*) $(wildcard src/drivers/*/*/*)
subdirs-y += src/cpu src/vendorcode
subdirs-y += util/cbfstool util/sconfig util/nvramtool util/pgtblgen util/amdfwtool
subdirs-y += util/futility util/marvell util/bincfg util/supermicro util/qemu
subdirs-y += util/ifdtool
subdirs-y += $(wildcard src/arch/*)
subdirs-y += src/mainboard/$(MAINBOARDDIR)
subdirs-y += src/security
subdirs-y += payloads payloads/external
Add SBOM (Software Bill of Materials) Generation Firmware is typically delivered as one large binary image that gets flashed. Since this final image consists of binaries and data from a vast number of different people and companies, it's hard to determine what all the small parts included in it are. The goal of the software bill of materials (SBOM) is to take a firmware image and make it easy to find out what it consists of and where those pieces came from. Basically, this answers the question, who supplied the code that's running on my system right now? For example, buyers of a system can use an SBOM to perform an automated vulnerability check or license analysis, both of which can be used to evaluate risk in a product. Furthermore, one can quickly check to see if the firmware is subject to a new vulnerability included in one of the software parts (with the specified version) of the firmware. Further reference: https://web.archive.org/web/20220310104905/https://blogs.gnome.org/hughsie/2022/03/10/firmware-software-bill-of-materials/ - Add Makefile.inc to generate and build coswid tags - Add templates for most payloads, coreboot, intel-microcode, amd-microcode. intel FSP-S/M/T, EC, BIOS_ACM, SINIT_ACM, intel ME and compiler (gcc,clang,other) - Add Kconfig entries to optionally supply a path to CoSWID tags instead of using the default CoSWID tags - Add CBFS entry called SBOM to each build via Makefile.inc - Add goswid utility tool to generate SBOM data Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Icb7481d4903f95d200eddbfed7728fbec51819d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-04-14 14:54:16 +02:00
subdirs-$(CONFIG_SBOM) += src/sbom
subdirs-y += site-local
subdirs-y += util/checklist util/testing
#######################################################################
# Add source classes and their build options
Introduce bootblock self-decompression Masked ROMs are the silent killers of boot speed on devices without memory-mapped SPI flash. They often contain awfully slow SPI drivers (presumably bit-banged) that take hundreds of milliseconds to load our bootblock, and every extra kilobyte of bootblock size has a hugely disproportionate impact on boot speed. The coreboot timestamps can never show that component, but it impacts our users all the same. This patch tries to alleviate that issue a bit by allowing us to compress the bootblock with LZ4, which can cut its size down to nearly half. Of course, masked ROMs usually don't come with decompression algorithms built in, so we need to introduce a little decompression stub that can decompress the rest of the bootblock. This is done by creating a new "decompressor" stage which runs before the bootblock, but includes the compressed bootblock code in its data section. It needs to be as small as possible to get a real benefit from this approach, which means no device drivers, no console output, no exception handling, etc. Besides the decompression algorithm itself we only include the timer driver so that we can measure the boot speed impact of decompression. On ARM and ARM64 systems, we also need to give SoC code a chance to initialize the MMU, since running decompression without MMU is prohibitively slow on these architectures. This feature is implemented for ARM and ARM64 architectures for now, although most of it is architecture-independent and it should be relatively simple to port to other platforms where a masked ROM loads the bootblock into SRAM. It is also supposed to be a clean starting point from which later optimizations can hopefully cut down the decompression stub size (currently ~4K on RK3399) a bit more. NOTE: Bootblock compression is not for everyone. Possible side effects include trying to run LZ4 on CPUs that come out of reset extremely underclocked or enabling this too early in SoC bring-up and getting frustrated trying to find issues in an undebuggable environment. Ask your SoC vendor if bootblock compression is right for you. Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-16 23:14:04 +02:00
classes-y := ramstage romstage bootblock decompressor postcar smm smmstub cpu_microcode verstage
# Add a special 'all' class to add sources to all stages
$(call add-special-class,all)
all-handler = $(foreach class,bootblock verstage romstage postcar ramstage,$(eval $(class)-y += $(2)))
$(call add-special-class,all_x86)
all_x86-handler = $(foreach class,bootblock verstage_x86 romstage postcar ramstage,$(eval $(class)-y += $(2)))
$(call add-special-class,verstage_x86)
ifeq ($(CONFIG_ARCH_VERSTAGE_X86_32)$(CONFIG_ARCH_VERSTAGE_X86_64),y)
verstage_x86-handler = $(eval verstage-y += $(2))
else
verstage_x86-handler =
endif
# Add dynamic classes for rmodules
$(foreach supported_arch,$(ARCH_SUPPORTED), \
$(eval $(call define_class,rmodules_$(supported_arch),$(supported_arch))))
# Provide a macro to determine environment for free standing rmodules.
$(foreach supported_arch,$(ARCH_SUPPORTED), \
$(eval rmodules_$(supported_arch)-generic-ccopts += -D__RMODULE__))
#######################################################################
# Helper functions for math, strings, and various file placement matters.
# macros work on all formats understood by printf(1)
# values are space separated if using more than one value
#
# int-add: adds an arbitrary length list of integers
# int-subtract: subtracts the second of two integers from the first
# int-multiply: multiplies an arbitrary length list of integers
# int-divide: divides the first integer by the second
# int-remainder: arithmetic remainder of the first number divided by the second
# int-shift-left: Shift $1 left by $2 bits
# int-lt: 1 if the first value is less than the second. 0 otherwise
# int-gt: 1 if the first values is greater than the second. 0 otherwise
# int-eq: 1 if the two values are equal. 0 otherwise
# int-align: align $1 to $2 units
# file-size: returns the filesize of the given file
# tolower: returns the value in all lowercase
# toupper: returns the value in all uppercase
# ws_to_under: returns the value with any whitespace changed to underscores
# get_fmap_value returns the value of a given FMAP field from fmap_config.h
_toint=$(shell printf "%d" $1)
_tohex=$(shell printf 0x"%x" $1)
_int-add2=$(shell expr $(call _toint,$1) + $(call _toint,$2))
int-add=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-add,$(call _int-add2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
int-subtract=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) - $(call _toint,$(word 2,$1))))
_int-multiply2=$(shell expr $(call _toint,$1) \* $(call _toint,$2))
int-multiply=$(if $(filter 1,$(words $1)),$(strip $1),$(call int-multiply,$(call _int-multiply2,$(word 1,$1),$(word 2,$1)) $(wordlist 3,$(words $1),$1)))
int-divide=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) / $(call _toint,$(word 2,$1))))
int-remainder=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) % $(call _toint,$(word 2,$1))))
int-shift-left=$(shell echo "$(call _toint,$(word 1, $1)) * (2 ^ $(call _toint,$(word 2, $1)))" | bc)
int-lt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \< $(call _toint,$(word 2,$1))))
int-gt=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) \> $(call _toint,$(word 2,$1))))
int-eq=$(if $(filter 1,$(words $1)),$(strip $1),$(shell expr $(call _toint,$(word 1,$1)) = $(call _toint,$(word 2,$1))))
int-align=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A + \( \( $$B - \( $$A % $$B \) \) % $$B \) )
int-align-down=$(shell A=$(call _toint,$1) B=$(call _toint,$2); expr $$A - \( $$A % $$B \) )
file-size=$(strip $(shell wc -c "$1" | cut -f 1 -d ' '))
tolower=$(shell echo '$1' | tr '[:upper:]' '[:lower:]')
toupper=$(shell echo '$1' | tr '[:lower:]' '[:upper:]')
ws_to_under=$(shell echo '$1' | tr ' \t' '_')
get_fmap_value=$(shell awk '$$2 == "$1" {print $$3}' $(obj)/fmap_config.h)
#######################################################################
# Helper functions for ramstage postprocess
spc :=
spc := $(spc) $(spc)
comma := ,
# Returns all files and dirs below `dir` (recursively).
# files-below-dir,dir,files
files-below-dir=$(filter $(1)%,$(2))
# Returns all dirs below `dir` (recursively).
# dirs-below-dir,dir,files
dirs-below-dir=$(filter-out $(1),$(sort $(dir $(call files-below-dir,$(1),$(2)))))
# Returns all files directly in `dir` (non-recursively).
# files-in-dir,dir,files
files-in-dir=$(filter-out $(addsuffix %,$(call dirs-below-dir,$(1),$(2))),$(call files-below-dir,$(1),$(2)))
#######################################################################
# reduce command line length by linking the objects of each
# directory into an intermediate file
ramstage-postprocess=$$(eval DEPENDENCIES+=$$(addsuffix .d,$$(basename $(1)))) \
$(foreach d,$(sort $(dir $(filter-out %.ld,$(1)))), \
$(eval $(d)ramstage.a: $(call files-in-dir,$(d),$(filter-out %.ld,$(1))); rm -f $$@ && $(AR_ramstage) rcsT $$@ $$^ ) \
$(eval ramstage-objs:=$(d)ramstage.a $(filter-out $(filter-out %.ld, $(call files-in-dir,$(d),$(1))),$(ramstage-objs))))
decompressor-generic-ccopts += -D__DECOMPRESSOR__
bootblock-generic-ccopts += -D__BOOTBLOCK__
romstage-generic-ccopts += -D__ROMSTAGE__
Add predefined __ROMSTAGE__ and __RAMSTAGE__ macros This patch adds the macros __ROMSTAGE__ and __RAMSTAGE__ which get predefined in their respective stages by make, so that we have one specific macro for every stage. It also renames __BOOT_BLOCK__ and __VER_STAGE__ to __BOOTBLOCK__ and __VERSTAGE__ for consistency. This change is intended to provide finer control and clearer communication of intent after we added a new (optional) stage that falls under __PRE_RAM__, and will hopefully provide some robustness for the future (we don't want to end up always checking for romstage with #if defined(__PRE_RAM__) && !defined(__BOOT_BLOCK__) && !defined(__VER_STAGE__) && !defined(__YET_ANOTHER_PRERAM_STAGE__)). The __PRE_RAM__ macro stays as it is since many features do in fact need to differentiate on whether RAM is available. (Some also depend on whether RAM is available at the end of a stage, in which case #if !defined(__PRE_RAM__) || defined(__ROMSTAGE__) should now be authoritative.) It's unfeasable to change all existing occurences of __PRE_RAM__ that would be better described with __ROMSTAGE__, so this patch only demonstratively changes a few obvious ones in core code. BUG=None TEST=None (tested together with dependent patch). Change-Id: I6a06d0f42c27a2feeb778a4acd35dd14bb53f744 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a4ad042746c1d3a7a3bfda422d26e0d3b9f9ae42 Original-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219172 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9304 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-09-16 07:10:33 +02:00
ramstage-generic-ccopts += -D__RAMSTAGE__
ifeq ($(CONFIG_COVERAGE),y)
Add predefined __ROMSTAGE__ and __RAMSTAGE__ macros This patch adds the macros __ROMSTAGE__ and __RAMSTAGE__ which get predefined in their respective stages by make, so that we have one specific macro for every stage. It also renames __BOOT_BLOCK__ and __VER_STAGE__ to __BOOTBLOCK__ and __VERSTAGE__ for consistency. This change is intended to provide finer control and clearer communication of intent after we added a new (optional) stage that falls under __PRE_RAM__, and will hopefully provide some robustness for the future (we don't want to end up always checking for romstage with #if defined(__PRE_RAM__) && !defined(__BOOT_BLOCK__) && !defined(__VER_STAGE__) && !defined(__YET_ANOTHER_PRERAM_STAGE__)). The __PRE_RAM__ macro stays as it is since many features do in fact need to differentiate on whether RAM is available. (Some also depend on whether RAM is available at the end of a stage, in which case #if !defined(__PRE_RAM__) || defined(__ROMSTAGE__) should now be authoritative.) It's unfeasable to change all existing occurences of __PRE_RAM__ that would be better described with __ROMSTAGE__, so this patch only demonstratively changes a few obvious ones in core code. BUG=None TEST=None (tested together with dependent patch). Change-Id: I6a06d0f42c27a2feeb778a4acd35dd14bb53f744 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a4ad042746c1d3a7a3bfda422d26e0d3b9f9ae42 Original-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/219172 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9304 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2014-09-16 07:10:33 +02:00
ramstage-c-ccopts += -fprofile-arcs -ftest-coverage
endif
ifneq ($(GIT),)
ifneq ($(UPDATED_SUBMODULES),1)
$(info Updating git submodules.)
# try to fetch non-optional submodules if the source is under git
forgetthis:=$(shell git submodule update --init $(quiet_errors))
# Checkout Cmocka repository
forgetthis:=$(shell git submodule update --init --checkout 3rdparty/cmocka $(quiet_errors))
ifeq ($(CONFIG_USE_BLOBS),y)
# These items are necessary because each has update=none in .gitmodules. They are ignored
# until expressly requested and enabled with --checkout
forgetthis:=$(shell git submodule update --init --checkout 3rdparty/blobs $(quiet_errors))
forgetthis:=$(shell git submodule update --init --checkout 3rdparty/intel-microcode $(quiet_errors))
ifeq ($(CONFIG_FSP_USE_REPO),y)
forgetthis:=$(shell git submodule update --init --checkout 3rdparty/fsp $(quiet_errors))
endif
ifeq ($(CONFIG_USE_AMD_BLOBS),y)
forgetthis:=$(shell git submodule update --init --checkout 3rdparty/amd_blobs $(quiet_errors))
endif
ifeq ($(CONFIG_USE_QC_BLOBS),y)
forgetthis:=$(shell git submodule update --init --checkout 3rdparty/qc_blobs $(quiet_errors))
endif
endif
UPDATED_SUBMODULES:=1
COREBOOT_EXPORTS += UPDATED_SUBMODULES
endif
endif # GIT != ""
postcar-c-deps:=$$(OPTION_TABLE_H)
ramstage-c-deps:=$$(OPTION_TABLE_H)
romstage-c-deps:=$$(OPTION_TABLE_H)
verstage-c-deps:=$$(OPTION_TABLE_H)
bootblock-c-deps:=$$(OPTION_TABLE_H)
$(foreach type,ads adb, \
$(foreach stage,$(COREBOOT_STANDARD_STAGES), \
$(eval $(stage)-$(type)-deps := \
$(obj)/$(stage)/$(notdir $(KCONFIG_AUTOADS)) \
$(obj)/libgnat-$(ARCH-$(stage)-y)/libgnat.a)))
# Add handler to copy linker scripts
define generic-objs_ld_template_gen
de$(EMPTY)fine $(1)-objs_ld_template
$$(call src-to-obj,$1,$$(1).ld): $$(1).ld $(obj)/config.h $(obj)/fmap_config.h
@printf " CP $$$$(subst $$$$(obj)/,,$$$$(@))\n"
Makefile: Fix dependency tracking for linker scripts When the memlayout framework was initially developed in the Chromium OS tree, the accompanying build system changes unified handling for all file types (including .ld and .asl) in a single template. This had the advantage that compiler invocation options pertaining to the build system itself could be centralized in a single place. On upstreaming this was reverted for some reason, keeping the old special handling for ASL files and writing a custom template for LD. The duplicated compiler invocation code for the latter was missing the -MMD flag required for dependency tracking. It was also missing at least one $-sign which causes the $(<class>-ld-ccopts) variable to be evaluated at the time it's parsing the template generator (before the subdirectory pass). This should not cause any issues with current code, but all the ccopts variables were meant to be evaluated after the subdirectory pass (so things like archs and SoCs can manipulate them if needed), so this patch fixes both issues. BRANCH=None BUG=None TEST='make; touch src/soc/.../memlayout.ld; make' re-links all stages and includes the changed symbol addresses from the new address map. Change-Id: I4be458112908380268229b3220cfa0062add5c5d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e8a36f994ef6a819ded7bf6b39b1e0fce8e52279 Original-Change-Id: If2310b46b53d888975cb2113edce20a896be39ef Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/303054 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/12139 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2015-09-30 01:41:11 +02:00
$$(CC_$(1)) -MMD $$(CPPFLAGS_$(1)) $$($(1)-ld-ccopts) $(PREPROCESS_ONLY) -include $(obj)/config.h -MT $$$$@ -o $$$$@ $$$$<
en$(EMPTY)def
endef
# Add handler to deal with archives
define generic-objs_a_template_gen
de$(EMPTY)fine $(1)-objs_a_template
$$(call src-to-obj,$1,$$(1).a): $$(1).a
@printf " AR $$$$(subst $$$$(obj)/,,$$$$(@))\n"
$$$$(AR_$(1)) rcsT $$$$@.tmp $$$$<
mv $$$$@.tmp $$$$@
en$(EMPTY)def
endef
# Add handler to add no rules for manual files
define generic-objs_manual_template_gen
# do nothing
endef
#######################################################################
# Add handler to compile ACPI's ASL
# arg1: base file name
# arg2: y or n for including in cbfs. defaults to y
# Empty resource templates were marked as a warning in IASL with the comment
# "This would appear to be worthless in real-world ASL code.", which is
# possibly true in many cases. In other cases it seems that an empty
# ResourceTemplate is the correct code.
# As it's valid ASL, disable the warning.
EMPTY_RESOURCE_TEMPLATE_WARNING = 3150
IASL_WARNINGS_LIST = $(EMPTY_RESOURCE_TEMPLATE_WARNING)
IGNORED_IASL_WARNINGS = $(addprefix -vw , $(IASL_WARNINGS_LIST))
define asl_template
$(CONFIG_CBFS_PREFIX)/$(1).aml-file = $(obj)/$(1).aml
$(CONFIG_CBFS_PREFIX)/$(1).aml-type = raw
$(CONFIG_CBFS_PREFIX)/$(1).aml-compression = none
ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_LPC_SPI_DMA),y)
$(CONFIG_CBFS_PREFIX)/$(1).aml-align = 64
endif
cbfs-files-$(if $(2),$(2),y) += $(CONFIG_CBFS_PREFIX)/$(1).aml
-include $(obj)/$(1).d
$(obj)/$(1).aml: $(src)/mainboard/$(MAINBOARDDIR)/$(1).asl $(obj)/config.h
@printf " IASL $$(subst $(top)/,,$$(@))\n"
$(CC_ramstage) -x assembler-with-cpp -E -MMD -MT $$(@) $$(CPPFLAGS_ramstage) -D__ACPI__ -P -include $(src)/include/kconfig.h -I$(obj) -I$(src) -I$(src)/include -I$(src)/arch/$(ARCHDIR-$(ARCH-ramstage-y))/include -I$(src)/mainboard/$(MAINBOARDDIR) $$< -o $(obj)/$(1).asl
cd $$(dir $$@); $(IASL) $(IGNORED_IASL_WARNINGS) -we -p $$(notdir $$@) $(1).asl
echo " IASL "$(IASL_WARNINGS_LIST)" warning types were ignored!"
if ! $(IASL) -d $$@ 2>&1 | grep -Eq 'ACPI (Warning|Error)'; then \
echo " IASL $$@ disassembled correctly."; \
true; \
else \
echo "Error: Could not correctly disassemble $$@"; \
$(IASL) -d $$@; \
false; \
fi
endef
#######################################################################
# Parse plaintext CMOS defaults into binary format
# arg1: source file
# arg2: binary file name
cbfs-files-processor-nvramtool= \
$(eval $(2): $(1) $(top)/$(call strip_quotes,$(CONFIG_CMOS_LAYOUT_FILE)) | $(objutil)/nvramtool/nvramtool ; \
printf " CREATE $(2) (from $(1))\n"; \
$(objutil)/nvramtool/nvramtool -y $(top)/$(call strip_quotes,$(CONFIG_CMOS_LAYOUT_FILE)) -D $(2).tmp -p $(1) && \
mv $(2).tmp $(2))
#######################################################################
build: Combine "savedefconfig" and "stripped config" in CBFS `config` The intention of CB:69710 was that the expanded config file introduced there would be a strict superset of the old version and could be used in all the same cases. This is generally true except for a small oversight: if a boolean Kconfig is `default y`, but was manually set to `n` by the user, the new `config` file does not include a line for it. Running `make olddefconfig` on such a file will again introduce the option as `y`. It turns out that `make olddefconfig` actually parses those "load-bearing comments" in that case. This patch fixes the problem by also generating the minimal defconfig (like before CB:69710), and then just appending the non-comment lines from the full config that don't appear in it already. This ensures that any "load-bearing comments" in the defconfig remain in the file and the result of Kconfig utilities regenerating a full config from there will again be the same as before CB:69710. In addition, it clearly separates the "minimal defconfig" part of the file from the rest, making it easy for people to extract that if they need it; while also keeping all the config values in one file to make it easy to grep for a certain value. Also eliminate that random backslash in the recipe that doesn't seem to have any good reason to exist and was probably a typo to begin with. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I52ba5d20d3536498fae79d529acf7135f97ef1a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-11-24 03:20:32 +01:00
# Reduce a .config file by removing lines about default unset booleans
# arg1: input
# arg2: output
build: List all Kconfigs in CBFS `config` file, compress it The coreboot build system automatically adds a `config` file to CBFS that lists the exact Kconfig configuration that this image was built with. This is useful to reproduce a build after the fact or to check whether support for a specific feature is enabled in the image. However, the file is currently generated using the `savedefconfig` command to Kconfig, which generates the minimal .config file that is needed to produce the required config in a coreboot build. This is fine for reproduction, but bad when you want to check if a certain config was enabled, since many configs get enabled by default or pulled in through another config's `select` statement and thus don't show up in the defconfig. This patch tries to fix that second use case by instead including the full .config instead. In order to save some space, we can remove all comments (e.g. `# CONFIG_XXX is not set`) from the file, which still makes it easy to test for a specific config (if it's in the file you can extract the right value, if not you can assume it was set to `n`). We can also LZMA compress it since this file is never read by firmware itself and only intended for later re-extraction via cbfstool, which always has LZMA support included. On a sample Trogdor device the existing (uncompressed) `config` file takes up 519 bytes in CBFS, whereas the new (compressed) file after this patch will take up 1832 bytes -- still a small amount that should hopefully not break the bank for anyone. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-11-17 02:48:46 +01:00
define cbfs-files-processor-config
$(eval $(2): $(1) $(obj)/build.h $(objutil)/kconfig/conf; \
+printf " CREATE $(2) (from $(1))\n"; \
printf "# This image was built using coreboot " > $(2).tmp && \
grep "\<COREBOOT_VERSION\>" $(obj)/build.h |cut -d\" -f2 >> $(2).tmp && \
build: Combine "savedefconfig" and "stripped config" in CBFS `config` The intention of CB:69710 was that the expanded config file introduced there would be a strict superset of the old version and could be used in all the same cases. This is generally true except for a small oversight: if a boolean Kconfig is `default y`, but was manually set to `n` by the user, the new `config` file does not include a line for it. Running `make olddefconfig` on such a file will again introduce the option as `y`. It turns out that `make olddefconfig` actually parses those "load-bearing comments" in that case. This patch fixes the problem by also generating the minimal defconfig (like before CB:69710), and then just appending the non-comment lines from the full config that don't appear in it already. This ensures that any "load-bearing comments" in the defconfig remain in the file and the result of Kconfig utilities regenerating a full config from there will again be the same as before CB:69710. In addition, it clearly separates the "minimal defconfig" part of the file from the rest, making it easy for people to extract that if they need it; while also keeping all the config values in one file to make it easy to grep for a certain value. Also eliminate that random backslash in the recipe that doesn't seem to have any good reason to exist and was probably a typo to begin with. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I52ba5d20d3536498fae79d529acf7135f97ef1a8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-11-24 03:20:32 +01:00
$(MAKE) DOTCONFIG=$(1) DEFCONFIG=$(2).tmp2 savedefconfig && \
cat $(2).tmp2 >> $(2).tmp && \
printf "# End of defconfig. Derivable values start here.\n" >> $(2).tmp && \
grep "^CONFIG" $(1) | grep -F -v -f $(2).tmp2 >> $(2).tmp && \
rm -f $(2).tmp2 && \
mv -f $(2).tmp $(2))
endef
#######################################################################
# Add a file to CBFS with just type and compression values
# arg1: name in CBFS
# arg2: filename and path
# arg3: type in CBFS
# arg4: compression type
define add-cbfs-file-simple
$(eval cbfs-files-y += $(1))
$(eval $(1)-file := $(2))
$(eval $(1)-type := $(3))
$(eval $(1)-compression := $(4))
endef
#######################################################################
# Compile a C file with a bare struct definition into binary
# arg1: C source file
# arg2: binary file
cbfs-files-processor-struct= \
$(eval $(2): $(1) $(obj)/build.h $(obj)/fmap_config.h $(KCONFIG_AUTOHEADER); \
printf " CC+STRIP $(1)\n"; \
$(CC_ramstage) -MMD $(CPPFLAGS_ramstage) $(CFLAGS_ramstage) --param asan-globals=0 $$(ramstage-c-ccopts) -include $(KCONFIG_AUTOHEADER) -MT $(2) -o $(2).tmp -c $(1) && \
$(OBJCOPY_ramstage) -O binary --only-section='.data*' --only-section='.bss*' --set-section-flags .bss*=alloc,contents,load $(2).tmp $(2); \
rm -f $(2).tmp) \
$(eval DEPENDENCIES += $(2).d)
#######################################################################
# Add handler for arbitrary files in CBFS
$(call add-special-class,cbfs-files)
cbfs-files-handler= \
$(eval tmp-cbfs-method:=$(word 2, $(subst :, ,$($(2)-file)))) \
$(eval $(2)-file:=$(call strip_quotes,$(word 1, $(subst :, ,$($(2)-file))))) \
$(eval tmp-cbfs-file:= ) \
$(if $($(2)-file), \
$(if $(wildcard $(1)$($(2)-file)), \
$(eval tmp-cbfs-file:= $(wildcard $(1)$($(2)-file))), \
$(eval tmp-cbfs-file:= $($(2)-file)))) \
$(if $(strip $($(2)-required)), \
$(if $(wildcard $(tmp-cbfs-file)),, \
$(info This build configuration requires $($(2)-required)) \
$(eval FAILBUILD:=1) \
)) \
$(if $(strip $($(2)-align)), \
$(if $(strip $($(2)-position)), \
$(info ERROR: It is not allowed to specify both alignment and position for $($(2)-file)) \
$(eval FAILBUILD:=1) \
)) \
$(if $(tmp-cbfs-method), \
$(eval tmp-old-cbfs-file:=$(tmp-cbfs-file)) \
$(eval tmp-cbfs-file:=$(shell mkdir -p $(obj)/mainboard/$(MAINBOARDDIR); mktemp $(obj)/mainboard/$(MAINBOARDDIR)/cbfs-file.XXXXXX).out) \
$(call cbfs-files-processor-$(tmp-cbfs-method),$(tmp-old-cbfs-file),$(tmp-cbfs-file))) \
$(if $(tmp-cbfs-file), \
$(eval cbfs-files += $(subst $(spc),*,$(tmp-cbfs-file)|$(2)|$($(2)-type)|$($(2)-compression)|$(strip $($(2)-position))|$($(2)-align)|$($(2)-options)))) \
$(eval $(2)-name:=) \
$(eval $(2)-type:=) \
$(eval $(2)-compression:=) \
$(eval $(2)-position:=) \
$(eval $(2)-required:=) \
$(eval $(2)-options:=) \
$(eval $(2)-align:=)
#######################################################################
# a variety of flags for our build
CBFS_COMPRESS_FLAG:=none
ifeq ($(CONFIG_COMPRESS_RAMSTAGE_LZMA),y)
CBFS_COMPRESS_FLAG:=LZMA
endif
ifeq ($(CONFIG_COMPRESS_RAMSTAGE_LZ4),y)
CBFS_COMPRESS_FLAG:=LZ4
endif
CBFS_PAYLOAD_COMPRESS_FLAG:=none
ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZMA),y)
CBFS_PAYLOAD_COMPRESS_FLAG:=LZMA
endif
ifeq ($(CONFIG_COMPRESSED_PAYLOAD_LZ4),y)
CBFS_PAYLOAD_COMPRESS_FLAG:=LZ4
endif
CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG:=none
ifeq ($(CONFIG_COMPRESS_SECONDARY_PAYLOAD),y)
CBFS_SECONDARY_PAYLOAD_COMPRESS_FLAG:=LZMA
endif
CBFS_PRERAM_COMPRESS_FLAG:=none
ifeq ($(CONFIG_COMPRESS_PRERAM_STAGES),y)
CBFS_PRERAM_COMPRESS_FLAG:=LZ4
endif
ifneq ($(CONFIG_LOCALVERSION),"")
COREBOOT_EXTRA_VERSION := -$(call strip_quotes,$(CONFIG_LOCALVERSION))
COREBOOT_EXPORTS += COREBOOT_EXTRA_VERSION
endif
CPPFLAGS_common := -Isrc -Isrc/include -Isrc/commonlib/include -Isrc/commonlib/bsd/include -I$(obj)
VBOOT_SOURCE ?= 3rdparty/vboot
CPPFLAGS_common += -I$(VBOOT_SOURCE)/firmware/include
CPPFLAGS_common += -include $(src)/include/kconfig.h
CPPFLAGS_common += -include $(src)/include/rules.h
CPPFLAGS_common += -include $(src)/commonlib/bsd/include/commonlib/bsd/compiler.h
CPPFLAGS_common += -I3rdparty
CPPFLAGS_common += -D__BUILD_DIR__=\"$(obj)\"
ifeq ($(BUILD_TIMELESS),1)
CPPFLAGS_common += -D__TIMELESS__
endif
ifeq ($(CONFIG_PCI_OPTION_ROM_RUN_YABEL)$(CONFIG_PCI_OPTION_ROM_RUN_REALMODE),y)
CPPFLAGS_ramstage += -Isrc/device/oprom/include
endif
CFLAGS_common += -pipe -g -nostdinc -std=gnu11
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
CFLAGS_common += -nostdlib -Wall -Wundef -Wstrict-prototypes -Wmissing-prototypes
CFLAGS_common += -Wwrite-strings -Wredundant-decls -Wno-trigraphs -Wimplicit-fallthrough
CFLAGS_common += -Wshadow -Wdate-time -Wtype-limits -Wvla -Wold-style-definition
CFLAGS_common += -Wdangling-else -Wmissing-include-dirs
CFLAGS_common += -fno-common -ffreestanding -fno-builtin -fomit-frame-pointer
CFLAGS_common += -fstrict-aliasing -ffunction-sections -fdata-sections -fno-pie
ifeq ($(CONFIG_COMPILER_GCC),y)
# Don't add these GCC specific flags when running scan-build
ifeq ($(CCC_ANALYZER_OUTPUT_FORMAT),)
CFLAGS_common += -Wno-packed-not-aligned
CFLAGS_common += -fconserve-stack
CFLAGS_common += -Wnull-dereference
CFLAGS_common += -Wlogical-op -Wduplicated-cond -Wno-array-compare
endif
endif
ADAFLAGS_common += -gnatp
ADAFLAGS_common += -Wuninitialized -Wall -Werror
ADAFLAGS_common += -pipe -g -nostdinc
ADAFLAGS_common += -Wstrict-aliasing -Wshadow
ADAFLAGS_common += -fno-common -fomit-frame-pointer
ADAFLAGS_common += -ffunction-sections -fdata-sections
ADAFLAGS_common += -fno-pie
# Ada warning options:
#
# a Activate most optional warnings.
# .e Activate every optional warnings.
# e Treat warnings and style checks as errors.
#
# D Suppress warnings on implicit dereferences:
# As SPARK does not accept access types we have to map the
# dynamically chosen register locations to a static SPARK
# variable.
#
# .H Suppress warnings on holes/gaps in records:
# We are modelling hardware here!
#
# H Suppress warnings on hiding:
# It's too annoying, you run out of ideas for identifiers fast.
#
# T Suppress warnings for tracking of deleted conditional code:
# We use static options to select code paths at compile time.
#
# U Suppress warnings on unused entities:
# Would have lots of warnings for unused register definitions,
# `withs` for debugging etc.
#
# .U Deactivate warnings on unordered enumeration types:
# As SPARK doesn't support `pragma Ordered` by now, we don't
# use that, yet.
#
# .W Suppress warnings on unnecessary Warnings Off pragmas:
# Things get really messy when you use different compiler
# versions, otherwise.
# .Y Disable information messages for why package spec needs body:
# Those messages are annoying. But don't forget to enable those,
# if you need the information.
ADAFLAGS_common += -gnatwa.eeD.HHTU.U.W.Y
# Disable style checks for now
ADAFLAGS_common += -gnatyN
LDFLAGS_common := --gc-sections -nostdlib --nmagic -static
# Workaround for RISC-V linker bug, merge back into above line when fixed.
# https://sourceware.org/bugzilla/show_bug.cgi?id=27180
ifneq ($(CONFIG_ARCH_RISCV),y)
LDFLAGS_common += --emit-relocs
endif
ifeq ($(CONFIG_WARNINGS_ARE_ERRORS),y)
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
CFLAGS_common += -Werror
endif
ifneq ($(GDB_DEBUG),)
CFLAGS_common += -Og
ADAFLAGS_common += -Og
else
CFLAGS_common += -Os
ADAFLAGS_common += -Os
endif
ifeq ($(CONFIG_DEBUG_ADA_CODE),y)
ADAFLAGS_common += -gnata
endif
additional-dirs += $(objutil)/cbfstool $(objutil)/ifdtool \
$(objutil)/options $(objutil)/amdfwtool \
$(objutil)/cbootimage
export $(COREBOOT_EXPORTS)
#######################################################################
# generate build support files
build_h := $(obj)/build.h
# We have to manually export variables that `genbuild_h.sh` uses
# when we call it through the `$(shell)` function. This is fragile
# but as variables newly added to `genbuild_h.sh` would just not
# work, we'd notice that instantly at least.
build_h_exports := BUILD_TIMELESS KERNELVERSION COREBOOT_EXTRA_VERSION
# Report new `build.ht` as dependency if `build.h` differs.
build_h_check := \
export $(foreach exp,$(build_h_exports),$(exp)="$($(exp))"); \
util/genbuild_h/genbuild_h.sh $(xcompile) \
>$(build_h)t 2>/dev/null; \
cmp -s $(build_h)t $(build_h) >/dev/null 2>&1 || echo $(build_h)t
$(build_h): $$(shell $$(build_h_check))
@printf " GEN build.h\n"
mv $< $@
$(obj)/build_info:
@echo 'COREBOOT_VERSION: $(call strip_quotes,$(KERNELVERSION))' > $@.tmp
@echo 'MAINBOARD_VENDOR: $(call strip_quotes,$(CONFIG_MAINBOARD_VENDOR))' >> $@.tmp
@echo 'MAINBOARD_PART_NUMBER: $(call strip_quotes,$(CONFIG_MAINBOARD_PART_NUMBER))' >> $@.tmp
mv $@.tmp $@
#######################################################################
# Build the tools
CBFSTOOL:=$(objutil)/cbfstool/cbfstool
FMAPTOOL:=$(objutil)/cbfstool/fmaptool
RMODTOOL:=$(objutil)/cbfstool/rmodtool
IFWITOOL:=$(objutil)/cbfstool/ifwitool
IFITTOOL:=$(objutil)/cbfstool/ifittool
AMDCOMPRESS:=$(objutil)/cbfstool/amdcompress
CSE_FPT:=$(objutil)/cbfstool/cse_fpt
CSE_SERGER:=$(objutil)/cbfstool/cse_serger
$(obj)/cbfstool: $(CBFSTOOL)
cp $< $@
$(obj)/fmaptool: $(FMAPTOOL)
cp $< $@
$(obj)/rmodtool: $(RMODTOOL)
cp $< $@
$(obj)/ifwitool: $(IFWITOOL)
cp $< $@
$(obj)/ifittool: $(IFITTOOL)
cp $< $@
$(obj)/amdcompress: $(AMDCOMPRESS)
cp $< $@
$(obj)/cse_fpt: $(CSE_FPT)
cp $< $@
$(obj)/cse_serger: $(CSE_SERGER)
cp $< $@
_WINCHECK=$(shell uname -o 2> /dev/null)
STACK=
ifeq ($(_WINCHECK),Msys)
STACK=-Wl,--stack,16384000
endif
ifeq ($(_WINCHECK),Cygwin)
STACK=-Wl,--stack,16384000
endif
BINCFG:=$(objutil)/bincfg/bincfg
IFDTOOL:=$(objutil)/ifdtool/ifdtool
AMDFWTOOL:=$(objutil)/amdfwtool/amdfwtool
AMDFWREAD:=$(objutil)/amdfwtool/amdfwread
APCB_EDIT_TOOL:=$(top)/util/apcb/apcb_edit.py
APCB_V3_EDIT_TOOL:=$(top)/util/apcb/apcb_v3_edit.py
CBOOTIMAGE:=$(objutil)/cbootimage/cbootimage
FUTILITY?=$(objutil)/futility/futility
subdirs-y += util/nvidia
$(obj)/config.h: $(objutil)/kconfig/conf
#######################################################################
# needed objects that every mainboard uses
# Creation of these is architecture and mainboard independent
DEVICETREE_FILE := $(src)/mainboard/$(MAINBOARDDIR)/$(CONFIG_DEVICETREE)
SCONFIG_OPTIONS := --mainboard_devtree=$(DEVICETREE_FILE)
ifneq ($(CONFIG_OVERRIDE_DEVICETREE),)
OVERRIDE_DEVICETREE_FILE := $(src)/mainboard/$(MAINBOARDDIR)/$(CONFIG_OVERRIDE_DEVICETREE)
SCONFIG_OPTIONS += --override_devtree=$(OVERRIDE_DEVICETREE_FILE)
endif
ifneq ($(CONFIG_CHIPSET_DEVICETREE),)
CHIPSET_DEVICETREE_FILE := $(src)/$(CONFIG_CHIPSET_DEVICETREE)
SCONFIG_OPTIONS += --chipset_devtree=$(CHIPSET_DEVICETREE_FILE)
endif
DEVICETREE_STATIC_C := $(obj)/mainboard/$(MAINBOARDDIR)/static.c
SCONFIG_OPTIONS += --output_c=$(DEVICETREE_STATIC_C)
DEVICETREE_STATIC_H := $(obj)/static.h
SCONFIG_OPTIONS += --output_h=$(DEVICETREE_STATIC_H)
DEVICETREE_DEVICENAMES_H := $(obj)/static_devices.h
SCONFIG_OPTIONS += --output_d=$(DEVICETREE_DEVICENAMES_H)
DEVICETREE_FWCONFIG_H := $(obj)/static_fw_config.h
SCONFIG_OPTIONS += --output_f=$(DEVICETREE_FWCONFIG_H)
$(DEVICETREE_STATIC_C): $(DEVICETREE_FILE) $(OVERRIDE_DEVICETREE_FILE) $(CHIPSET_DEVICETREE_FILE) $(objutil)/sconfig/sconfig
@printf " SCONFIG $(subst $(src)/,,$(<))\n"
mkdir -p $(dir $(DEVICETREE_STATIC_C))
$(objutil)/sconfig/sconfig $(SCONFIG_OPTIONS)
ramstage-y+=$(DEVICETREE_STATIC_C)
romstage-y+=$(DEVICETREE_STATIC_C)
verstage-y+=$(DEVICETREE_STATIC_C)
bootblock-y+=$(DEVICETREE_STATIC_C)
postcar-y+=$(DEVICETREE_STATIC_C)
smm-y+=$(DEVICETREE_STATIC_C)
# Ensure static.c and static.h are created before any objects are compiled
ramstage-c-deps+=$(DEVICETREE_STATIC_C)
romstage-c-deps+=$(DEVICETREE_STATIC_C)
verstage-c-deps+=$(DEVICETREE_STATIC_C)
bootblock-c-deps+=$(DEVICETREE_STATIC_C)
postcar-c-deps+=$(DEVICETREE_STATIC_C)
smm-c-deps+=$(DEVICETREE_STATIC_C)
# Ensure fmap_config.h are created before any objects are compiled
ramstage-c-deps+=$(obj)/fmap_config.h
romstage-c-deps+=$(obj)/fmap_config.h
verstage-c-deps+=$(obj)/fmap_config.h
bootblock-c-deps+=$(obj)/fmap_config.h
postcar-c-deps+=$(obj)/fmap_config.h
smm-c-deps+=$(obj)/fmap_config.h
.PHONY: devicetree
devicetree: $(DEVICETREE_STATIC_C)
ramstage-y += $(CONFIG_MEMLAYOUT_LD_FILE)
romstage-y += $(CONFIG_MEMLAYOUT_LD_FILE)
bootblock-y += $(CONFIG_MEMLAYOUT_LD_FILE)
verstage-y += $(CONFIG_MEMLAYOUT_LD_FILE)
postcar-y += $(CONFIG_MEMLAYOUT_LD_FILE)
decompressor-y += $(CONFIG_MEMLAYOUT_LD_FILE)
#######################################################################
# Clean up rules
clean-abuild:
rm -rf coreboot-builds
#######################################################################
# Development utilities
printcrt0s:
@echo crt0s=$(crt0s)
@echo ldscripts=$(ldscripts)
update:
dongle.py -c /dev/term/1 $(obj)/coreboot.rom EOF
check-style:
grep "^# DESCR:" util/lint/check-style | sed "s,.*DESCR: *,,"
echo "========"
util/lint/check-style
echo "========"
gitconfig:
util/gitconfig/gitconfig.sh "$(MAKE)"
install-git-commit-clangfmt:
cp util/scripts/prepare-commit-msg.clang-format .git/hooks/prepare-commit-msg
include util/crossgcc/Makefile.inc
.PHONY: tools
tools: $(objutil)/kconfig/conf $(objutil)/kconfig/toada $(CBFSTOOL) $(objutil)/cbfstool/cbfs-compression-tool $(FMAPTOOL) $(RMODTOOL) $(IFWITOOL) $(objutil)/nvramtool/nvramtool $(objutil)/sconfig/sconfig $(IFDTOOL) $(CBOOTIMAGE) $(AMDFWTOOL) $(AMDCOMPRESS) $(FUTILITY) $(BINCFG) $(IFITTOOL) $(objutil)/supermicro/smcbiosinfo $(CSE_FPT) $(CSE_SERGER) $(AMDFWREAD)
###########################################################################
# Common recipes for all stages
###########################################################################
New mechanism to define SRAM/memory map with automatic bounds checking This patch creates a new mechanism to define the static memory layout (primarily in SRAM) for a given board, superseding the brittle mass of Kconfigs that we were using before. The core part is a memlayout.ld file in the mainboard directory (although boards are expected to just include the SoC default in most cases), which is the primary linker script for all stages (though not rmodules for now). It uses preprocessor macros from <memlayout.h> to form a different valid linker script for all stages while looking like a declarative, boilerplate-free map of memory addresses to the programmer. Linker asserts will automatically guarantee that the defined regions cannot overlap. Stages are defined with a maximum size that will be enforced by the linker. The file serves to both define and document the memory layout, so that the documentation cannot go missing or out of date. The mechanism is implemented for all boards in the ARM, ARM64 and MIPS architectures, and should be extended onto all systems using SRAM in the future. The CAR/XIP environment on x86 has very different requirements and the layout is generally not as static, so it will stay like it is and be unaffected by this patch (save for aligning some symbol names for consistency and sharing the new common ramstage linker script include). BUG=None TEST=Booted normally and in recovery mode, checked suspend/resume and the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies with ToT and looked for red flags. Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614 Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/213370 Reviewed-on: http://review.coreboot.org/9283 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-21 00:29:56 +02:00
# loadaddr can determine the load address of a stage, which may be needed for
# platform-specific image headers (only works *after* the stage has been built)
loadaddr = $(shell $(OBJDUMP_$(1)) -p $(objcbfs)/$(1).debug | \
sed -ne '/LOAD/s/^.*vaddr 0x\([0-9a-fA-F]\{8\}\).*$$/0x\1/p')
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
# find-substr is required for stages like romstage_null and romstage_xip to
# eliminate the _* part of the string
find-substr = $(word 1,$(subst _, ,$(1)))
# find-class is used to identify the class from the name of the stage
# The input to this macro can be something like romstage.x or romstage.x.y
# find-class recursively strips off the suffixes to extract the exact class name
# e.g.: if romstage.x is provided to find-class, it will remove .x and return romstage
# if romstage.x.y is provided, it will first remove .y, call find-class with romstage.x
# and remove .x the next time and finally return romstage
find-class = $(if $(filter $(1),$(basename $(1))),$(if $(CC_$(1)), $(1), $(call find-substr,$(1))),$(call find-class,$(basename $(1))))
# Bootblocks are not CBFS stages. coreboot is currently expecting the bss to
# be cleared by the loader of the stage. For ARM SoCs that means one needs to
# include the bss section in the binary so the BootROM clears the bss on
# loading of the bootblock stage. Achieve this by marking the bss section
# loadable,allocatable, and data. Do the same for the .data section in case
# the linker marked it NOBITS automatically because there are only zeroes in it.
preserve-bss-flags := --set-section-flags .bss=load,alloc,data --set-section-flags .data=load,alloc,data
# For Intel TXT files in the CBFS needs to be marked as 'Initial Boot Block'.
# As CBFS attributes aren't cheap, only mark them if TXT is enabled.
ifeq ($(CONFIG_INTEL_TXT),y)
TXTIBB := --ibb
else
TXTIBB :=
endif
Introduce bootblock self-decompression Masked ROMs are the silent killers of boot speed on devices without memory-mapped SPI flash. They often contain awfully slow SPI drivers (presumably bit-banged) that take hundreds of milliseconds to load our bootblock, and every extra kilobyte of bootblock size has a hugely disproportionate impact on boot speed. The coreboot timestamps can never show that component, but it impacts our users all the same. This patch tries to alleviate that issue a bit by allowing us to compress the bootblock with LZ4, which can cut its size down to nearly half. Of course, masked ROMs usually don't come with decompression algorithms built in, so we need to introduce a little decompression stub that can decompress the rest of the bootblock. This is done by creating a new "decompressor" stage which runs before the bootblock, but includes the compressed bootblock code in its data section. It needs to be as small as possible to get a real benefit from this approach, which means no device drivers, no console output, no exception handling, etc. Besides the decompression algorithm itself we only include the timer driver so that we can measure the boot speed impact of decompression. On ARM and ARM64 systems, we also need to give SoC code a chance to initialize the MMU, since running decompression without MMU is prohibitively slow on these architectures. This feature is implemented for ARM and ARM64 architectures for now, although most of it is architecture-independent and it should be relatively simple to port to other platforms where a masked ROM loads the bootblock into SRAM. It is also supposed to be a clean starting point from which later optimizations can hopefully cut down the decompression stub size (currently ~4K on RK3399) a bit more. NOTE: Bootblock compression is not for everyone. Possible side effects include trying to run LZ4 on CPUs that come out of reset extremely underclocked or enabling this too early in SoC bring-up and getting frustrated trying to find issues in an undebuggable environment. Ask your SoC vendor if bootblock compression is right for you. Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-16 23:14:04 +02:00
ifeq ($(CONFIG_COMPRESS_BOOTBLOCK),y)
$(objcbfs)/bootblock.lz4: $(objcbfs)/bootblock.elf $(objutil)/cbfstool/cbfs-compression-tool
@printf " LZ4 $(subst $(obj)/,,$(@))\n"
$(OBJCOPY_bootblock) $(preserve-bss-flags) $< $@.tmp
$(OBJCOPY_bootblock) -O binary $@.tmp
$(objutil)/cbfstool/cbfs-compression-tool rawcompress $@.tmp $@.tmp2 lz4
rm -f $@.tmp
mv $@.tmp2 $@
# Put assembled decompressor+bootblock into bootblock.raw.elf so that SoC
# Makefiles wrapping the bootblock in a header can always key off the same file.
$(objcbfs)/bootblock.raw.elf: $(objcbfs)/decompressor.elf
@printf " OBJCOPY $(notdir $(@))\n"
$(OBJCOPY_bootblock) $(preserve-bss-flags) $< $@
else # CONFIG_COMPRESS_BOOTBLOCK
$(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf
@printf " OBJCOPY $(notdir $(@))\n"
$(OBJCOPY_bootblock) $(preserve-bss-flags) $< $@
Introduce bootblock self-decompression Masked ROMs are the silent killers of boot speed on devices without memory-mapped SPI flash. They often contain awfully slow SPI drivers (presumably bit-banged) that take hundreds of milliseconds to load our bootblock, and every extra kilobyte of bootblock size has a hugely disproportionate impact on boot speed. The coreboot timestamps can never show that component, but it impacts our users all the same. This patch tries to alleviate that issue a bit by allowing us to compress the bootblock with LZ4, which can cut its size down to nearly half. Of course, masked ROMs usually don't come with decompression algorithms built in, so we need to introduce a little decompression stub that can decompress the rest of the bootblock. This is done by creating a new "decompressor" stage which runs before the bootblock, but includes the compressed bootblock code in its data section. It needs to be as small as possible to get a real benefit from this approach, which means no device drivers, no console output, no exception handling, etc. Besides the decompression algorithm itself we only include the timer driver so that we can measure the boot speed impact of decompression. On ARM and ARM64 systems, we also need to give SoC code a chance to initialize the MMU, since running decompression without MMU is prohibitively slow on these architectures. This feature is implemented for ARM and ARM64 architectures for now, although most of it is architecture-independent and it should be relatively simple to port to other platforms where a masked ROM loads the bootblock into SRAM. It is also supposed to be a clean starting point from which later optimizations can hopefully cut down the decompression stub size (currently ~4K on RK3399) a bit more. NOTE: Bootblock compression is not for everyone. Possible side effects include trying to run LZ4 on CPUs that come out of reset extremely underclocked or enabling this too early in SoC bring-up and getting frustrated trying to find issues in an undebuggable environment. Ask your SoC vendor if bootblock compression is right for you. Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-16 23:14:04 +02:00
endif # CONFIG_COMPRESS_BOOTBLOCK
$(objcbfs)/bootblock.raw.bin: $(objcbfs)/bootblock.raw.elf
@printf " OBJCOPY $(notdir $(@))\n"
$(OBJCOPY_bootblock) -O binary $< $@
ifneq ($(CONFIG_HAVE_BOOTBLOCK),y)
$(objcbfs)/bootblock.bin:
dd if=/dev/zero of=$@ bs=64 count=1
endif
$(objcbfs)/%.bin: $(objcbfs)/%.raw.bin
cp $< $@
$(objcbfs)/%.map: $(objcbfs)/%.debug
$(eval class := $(call find-class,$(@F)))
$(NM_$(class)) -n $< | sort > $(basename $@).map
$(objcbfs)/%.elf: $(objcbfs)/%.debug $(objcbfs)/%.map
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(eval class := $(call find-class,$(@F)))
@printf " OBJCOPY $(subst $(obj)/,,$(@))\n"
cp $< $@.tmp
Introduce stage-specific architecture for coreboot Make all three coreboot stages (bootblock, romstage and ramstage) aware of the architecture specific to that stage i.e. we will have CONFIG_ARCH variables for each of the three stages. This allows us to have an SOC with any combination of architectures and thus every stage can be made to run on a completely different architecture independent of others. Thus, bootblock can have an x86 arch whereas romstage and ramstage can have arm32 and arm64 arch respectively. These stage specific CONFIG_ARCH_ variables enable us to select the proper set of toolchain and compiler flags for every stage. These options can be considered as either arch or modes eg: x86 running in different modes or ARM having different arch types (v4, v7, v8). We have got rid of the original CONFIG_ARCH option completely as every stage can have any architecture of its own. Thus, almost all the components of coreboot are identified as being part of one of the three stages (bootblock, romstage or ramstage). The components which cannot be classified as such e.g. smm, rmodules can have their own compiler toolset which is for now set to *_i386. Hence, all special classes are treated in a similar way and the compiler toolset is defined using create_class_compiler defined in Makefile. In order to meet these requirements, changes have been made to CC, LD, OBJCOPY and family to add CC_bootblock, CC_romstage, CC_ramstage and similarly others. Additionally, CC_x86_32 and CC_armv7 handle all the special classes. All the toolsets are defined using create_class_compiler. Few additional macros have been introduced to identify the class to be used at various points, e.g.: CC_$(class) derives the $(class) part from the name of the stage being compiled. We have also got rid of COREBOOT_COMPILER, COREBOOT_ASSEMBLER and COREBOOT_LINKER as they do not make any sense for coreboot as a whole. All these attributes are associated with each of the stages. Change-Id: I923f3d4fb097d21071030b104c372cc138c68c7b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5577 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-04-23 19:18:48 +02:00
$(OBJCOPY_$(class)) --strip-debug $@.tmp
$(OBJCOPY_$(class)) --add-gnu-debuglink=$< $@.tmp
mv $@.tmp $@
Introduce bootblock self-decompression Masked ROMs are the silent killers of boot speed on devices without memory-mapped SPI flash. They often contain awfully slow SPI drivers (presumably bit-banged) that take hundreds of milliseconds to load our bootblock, and every extra kilobyte of bootblock size has a hugely disproportionate impact on boot speed. The coreboot timestamps can never show that component, but it impacts our users all the same. This patch tries to alleviate that issue a bit by allowing us to compress the bootblock with LZ4, which can cut its size down to nearly half. Of course, masked ROMs usually don't come with decompression algorithms built in, so we need to introduce a little decompression stub that can decompress the rest of the bootblock. This is done by creating a new "decompressor" stage which runs before the bootblock, but includes the compressed bootblock code in its data section. It needs to be as small as possible to get a real benefit from this approach, which means no device drivers, no console output, no exception handling, etc. Besides the decompression algorithm itself we only include the timer driver so that we can measure the boot speed impact of decompression. On ARM and ARM64 systems, we also need to give SoC code a chance to initialize the MMU, since running decompression without MMU is prohibitively slow on these architectures. This feature is implemented for ARM and ARM64 architectures for now, although most of it is architecture-independent and it should be relatively simple to port to other platforms where a masked ROM loads the bootblock into SRAM. It is also supposed to be a clean starting point from which later optimizations can hopefully cut down the decompression stub size (currently ~4K on RK3399) a bit more. NOTE: Bootblock compression is not for everyone. Possible side effects include trying to run LZ4 on CPUs that come out of reset extremely underclocked or enabling this too early in SoC bring-up and getting frustrated trying to find issues in an undebuggable environment. Ask your SoC vendor if bootblock compression is right for you. Change-Id: I0dc1cad9ae7508892e477739e743cd1afb5945e8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/26340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-05-16 23:14:04 +02:00
###########################################################################
# Build the final rom image
###########################################################################
# extract_nth - Return a subsection of the $file string
#
# the input string looks like this:
# ./build/cbfs/fallback/romstage.elf|fallback/romstage|stage|none||64|--xip*-S*.car.data*-P*0x10000
#
# Sections:
# 1 - Path and name of file [FILENAME: Added to cbfs-files-y list variable]
# 2 - Name of file in cbfs [$(FILENAME)-file]
# 3 - File type: [$(FILENAME)-type]
# bootblock, cbfs header, stage, payload, optionrom, bootsplash, raw, vsa,
# mbi, microcode, fsp, mrc, cmos_default, cmos_layout, spd, mrc_cache,
# mma, efi, deleted, null
# 4 - Compression type [$(FILENAME)-compression]
# none, LZMA
# 5 - Base address [$(FILANAME)-position]
# 6 - Alignment [$(FILENAME)-align]
# 7 - cbfstool flags [$(FILENAME)-options]
#
# Input:
# $(1) = Section to extract
# $(2) = Input string
#
# Steps:
# 1) replace all '|' characters with the sequence '- -' within the full string, prepended and appended with the character '-'
# 2) extract the specified section from the string - this gets us the section surrounded by '-' characters
# 3) remove the leading and trailing '-' characters
# 4) replace all '*' characters with spaces
extract_nth=$(subst *,$(spc),$(patsubst -%-,%,$(word $(1), $(subst |,- -,-$(2)-))))
# regions-for-file - Returns a cbfstool regions parameter
# $(call regions-for-file,$(filename))
# returns "REGION1,REGION2,..."
#
# This is the default implementation. When using a boot strategy employing
# multiple CBFSes in fmap regions, override it.
regions-for-file ?= $(if $(value regions-for-file-$(1)), $(regions-for-file-$(1)), COREBOOT)
ifeq ($(CONFIG_CBFS_AUTOGEN_ATTRIBUTES),y)
cbfs-autogen-attributes=-g
endif
# cbfs-add-cmd-for-region
# $(call cbfs-add-cmd-for-region,file in extract_nth format,region name)
#
# CBFSTOOL_ADD_CMD_OPTIONS can be used by arch/SoC/mainboard to supply
# add commands with any additional arguments for cbfstool.
# Example: --ext-win-base <base> --ext-win-size <size>
define cbfs-add-cmd-for-region
$(CBFSTOOL) $@.tmp \
add$(if $(filter stage,$(call extract_nth,3,$(1))),-stage)$(if \
$(filter payload,$(call extract_nth,3,$(1))),-payload)$(if \
$(filter flat-binary,$(call extract_nth,3,$(1))),-flat-binary) \
-f $(call extract_nth,1,$(1)) \
-n $(call extract_nth,2,$(1)) \
$(if $(filter-out flat-binary payload stage,$(call \
extract_nth,3,$(1))),-t $(call extract_nth,3,$(1))) \
$(if $(call extract_nth,4,$(1)),-c $(call extract_nth,4,$(1))) \
$(cbfs-autogen-attributes) \
-r $(2) \
$(if $(call extract_nth,6,$(1)),-a $(call extract_nth,6,$(file)), \
$(if $(call extract_nth,5,$(file)),-b $(call extract_nth,5,$(file)))) \
$(call extract_nth,7,$(1)) \
$(CBFSTOOL_ADD_CMD_OPTIONS)
endef
# Empty line before endef is necessary so cbfs-add-cmd-for-region ends in a
# newline
# cbfs-add-cmd
# $(call cbfs-add-cmd,
# file in extract_nth format,
# region name,
# non-empty if file removal requested)
define cbfs-add-cmd
printf " CBFS $(call extract_nth,2,$(1))\n"
$(if $(3),-$(CBFSTOOL) $@.tmp remove -n $(call extract_nth,2,$(file)) 2>/dev/null)
$(call cbfs-add-cmd-for-region,$(1),$(2))
endef
# list of files to add (using their file system names, not CBFS names),
# for dependencies etc.
prebuilt-files = $(foreach file,$(cbfs-files), $(call extract_nth,1,$(file)))
# $(all-regions)
# returns full list of fmap regions that we add files to
all-regions = $(sort $(subst $(comma),$(spc), \
$(foreach file,$(cbfs-files), \
$(call regions-for-file,$(call extract_nth,2,$(file))))))
# $(call all-files-in-region,region name)
# returns elements in $(cbfs-files) that end up in that region, in the order
# they appear in $(cbfs-files)
all-files-in-region = $(foreach file,$(cbfs-files), \
$(if $(filter $(1), \
$(subst $(comma),$(spc),$(call regions-for-file,$(call extract_nth,2,$(file))))), \
$(file)))
# $(call update-file-for-region,file string from $(cbfs-files),region name)
# Update position and alignment according to overrides for region
# Doesn't check for invalid configurations (eg. resetting neither or both
# position and align)
# Returns the updated file string
update-file-for-region = \
$(subst $(spc),*,$(call extract_nth,1,$(1))|$(call extract_nth,2,$(1))|$(call extract_nth,3,$(1))|$(call extract_nth,4,$(1))|$($(call extract_nth,2,$(1))-$(2)-position)|$($(call extract_nth,2,$(1))-$(2)-align)|$(call extract_nth,7,$(1)))
# $(call placed-files-in-region,region name)
# like all-files-in-region, but updates the files to contain region overrides
# to position or alignment.
placed-files-in-region = $(foreach file,$(call all-files-in-region,$(1)), \
$(if $($(call extract_nth,2,$(file))-$(1)-position), \
$(if $($(call extract_nth,2,$(file))-$(1)-align), \
$(error It is not allowed to specify both alignment and position for $(call extract_nth,2,$(file))-$(1))) \
$(call update-file-for-region,$(file),$(1)), \
$(if $($(call extract_nth,2,$(file))-$(1)-align), \
$(call update-file-for-region,$(file),$(1)), \
$(file))))
# $(call sort-files,subset of $(cbfs-files))
# reorders the files in the given set to list files at fixed positions first,
# followed by aligned files and finally those with no constraints.
sort-files = \
$(eval _tmp_fixed:=) \
$(eval _tmp_aligned:=) \
$(eval _tmp_regular:=) \
$(foreach file,$(1), \
$(if $(call extract_nth,5,$(file)),\
$(eval _tmp_fixed += $(file)), \
$(if $(call extract_nth,6,$(file)), \
$(eval _tmp_aligned += $(file)), \
$(eval _tmp_regular += $(file))))) \
$(_tmp_fixed) $(_tmp_aligned) $(_tmp_regular)
# command list to add files to CBFS
prebuild-files = $(foreach region,$(all-regions), \
$(foreach file, \
$(call sort-files,$(call placed-files-in-region,$(region))), \
$(call cbfs-add-cmd,$(file),$(region),$(CONFIG_UPDATE_IMAGE))))
# If no FMD file (Flashmap) is supplied by mainboard, fall back to a default
ifeq ($(CONFIG_FMDFILE),)
ifeq ($(CONFIG_ARCH_X86),y)
DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default-x86.fmd
# check if IFD_CHIPSET is set and if yes generate a FMAP template from IFD descriptor
ifneq ($(CONFIG_IFD_CHIPSET),)
ifeq ($(CONFIG_HAVE_IFD_BIN),y)
DEFAULT_FLASHMAP:=$(obj)/fmap-template.fmd
$(DEFAULT_FLASHMAP): $(call strip_quotes,$(CONFIG_IFD_BIN_PATH)) $(IFDTOOL)
echo " IFDTOOL -p $(CONFIG_IFD_CHIPSET) -F $@ $<"
$(IFDTOOL) -p $(CONFIG_IFD_CHIPSET) -F $@ $<
endif # ifeq($(CONFIG_HAVE_IFD_BIN),y)
endif # ifneq($(CONFIG_IFD_CHIPSET),)
# entire flash
FMAP_ROM_ADDR := $(call int-subtract, 0x100000000 $(CONFIG_ROM_SIZE))
FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE)
# entire "BIOS" region (everything directly of concern to the host system)
# relative to ROM_BASE
FMAP_BIOS_BASE := $(call int-align, $(call int-subtract, $(CONFIG_ROM_SIZE) $(CONFIG_CBFS_SIZE)), 0x10000)
FMAP_BIOS_SIZE := $(call int-align-down, $(shell echo $(CONFIG_CBFS_SIZE) | tr A-F a-f), 0x10000)
# position and size of flashmap, relative to BIOS_BASE
#
# X86 CONSOLE FMAP region
#
# position, size and entry line of CONSOLE relative to BIOS_BASE, if enabled
FMAP_CURRENT_BASE := 0
ifeq ($(CONFIG_CONSOLE_SPI_FLASH),y)
FMAP_CONSOLE_BASE := $(FMAP_CURRENT_BASE)
FMAP_CONSOLE_SIZE := $(CONFIG_CONSOLE_SPI_FLASH_BUFFER_SIZE)
FMAP_CONSOLE_ENTRY := CONSOLE@$(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE))
else
FMAP_CONSOLE_ENTRY :=
endif
ifeq ($(CONFIG_CACHE_MRC_SETTINGS),y)
FMAP_MRC_CACHE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x10000)
FMAP_MRC_CACHE_SIZE := $(CONFIG_MRC_SETTINGS_CACHE_SIZE)
FMAP_MRC_CACHE_ENTRY := RW_MRC_CACHE@$(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE))
else
FMAP_MRC_CACHE_ENTRY :=
endif
ifeq ($(CONFIG_SMMSTORE),y)
FMAP_SMMSTORE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x10000)
FMAP_SMMSTORE_SIZE := $(CONFIG_SMMSTORE_SIZE)
FMAP_SMMSTORE_ENTRY := SMMSTORE@$(FMAP_SMMSTORE_BASE) $(FMAP_SMMSTORE_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_SMMSTORE_BASE) $(FMAP_SMMSTORE_SIZE))
else
FMAP_SMMSTORE_ENTRY :=
endif
ifeq ($(CONFIG_SPD_CACHE_IN_FMAP),y)
FMAP_SPD_CACHE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x4000)
FMAP_SPD_CACHE_SIZE := $(call int-multiply, $(CONFIG_DIMM_MAX) $(CONFIG_DIMM_SPD_SIZE))
FMAP_SPD_CACHE_SIZE := $(call int-align, $(FMAP_SPD_CACHE_SIZE), 0x1000)
FMAP_SPD_CACHE_ENTRY := $(CONFIG_SPD_CACHE_FMAP_NAME)@$(FMAP_SPD_CACHE_BASE) $(FMAP_SPD_CACHE_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_SPD_CACHE_BASE) $(FMAP_SPD_CACHE_SIZE))
else
FMAP_SPD_CACHE_ENTRY :=
endif
ifeq ($(CONFIG_VPD),y)
FMAP_VPD_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x4000)
FMAP_VPD_SIZE := $(CONFIG_VPD_FMAP_SIZE)
FMAP_VPD_ENTRY := $(CONFIG_VPD_FMAP_NAME)@$(FMAP_VPD_BASE) $(FMAP_VPD_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_VPD_BASE) $(FMAP_VPD_SIZE))
else
FMAP_VPD_ENTRY :=
endif
ifeq ($(CONFIG_INCLUDE_HSPHY_IN_FMAP),y)
FMAP_HSPHY_FW_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x1000)
FMAP_HSPHY_FW_SIZE := $(CONFIG_HSPHY_FW_MAX_SIZE)
FMAP_HSPHY_FW_ENTRY := HSPHY_FW@$(FMAP_HSPHY_FW_BASE) $(FMAP_HSPHY_FW_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_HSPHY_FW_BASE) $(FMAP_HSPHY_FW_SIZE))
else
FMAP_HSPHY_FW_ENTRY :=
endif
#
# X86 FMAP region
#
#
# position, size
FMAP_FMAP_BASE := $(FMAP_CURRENT_BASE)
FMAP_FMAP_SIZE := 0x200
#
# X86 COREBOOT default cbfs FMAP region
#
# position and size of CBFS, relative to BIOS_BASE
FMAP_CBFS_BASE := $(call int-add, $(FMAP_FMAP_BASE) $(FMAP_FMAP_SIZE))
FMAP_CBFS_SIZE := $(call int-subtract, $(FMAP_BIOS_SIZE) $(FMAP_CBFS_BASE))
else # ifeq ($(CONFIG_ARCH_X86),y)
DEFAULT_FLASHMAP:=$(top)/util/cbfstool/default.fmd
# entire flash
FMAP_ROM_ADDR := 0
FMAP_ROM_SIZE := $(CONFIG_ROM_SIZE)
# entire "BIOS" region (everything directly of concern to the host system)
# relative to ROM_BASE
FMAP_BIOS_BASE := 0
FMAP_BIOS_SIZE := $(CONFIG_CBFS_SIZE)
# position and size of flashmap, relative to BIOS_BASE
FMAP_FMAP_BASE := 0x20000
FMAP_FMAP_SIZE := 0x200
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_FMAP_BASE) $(FMAP_FMAP_SIZE))
#
# NON-X86 CONSOLE FMAP region
#
# position, size and entry line of CONSOLE relative to BIOS_BASE, if enabled
ifeq ($(CONFIG_CONSOLE_SPI_FLASH),y)
FMAP_CONSOLE_BASE := $(FMAP_CURRENT_BASE)
FMAP_CONSOLE_SIZE := $(CONFIG_CONSOLE_SPI_FLASH_BUFFER_SIZE)
FMAP_CONSOLE_ENTRY := CONSOLE@$(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_CONSOLE_BASE) $(FMAP_CONSOLE_SIZE))
else
FMAP_CONSOLE_ENTRY :=
endif
#
# NON-X86 RW_MRC_CACHE FMAP region
#
# position, size and entry line of MRC_CACHE relative to BIOS_BASE, if enabled
ifeq ($(CONFIG_CACHE_MRC_SETTINGS),y)
FMAP_MRC_CACHE_BASE := $(call int-align, $(FMAP_CURRENT_BASE), 0x10000)
FMAP_MRC_CACHE_SIZE := $(CONFIG_MRC_SETTINGS_CACHE_SIZE)
FMAP_MRC_CACHE_ENTRY := RW_MRC_CACHE@$(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE)
FMAP_CURRENT_BASE := $(call int-add, $(FMAP_MRC_CACHE_BASE) $(FMAP_MRC_CACHE_SIZE))
else
FMAP_MRC_CACHE_ENTRY :=
endif
#
# NON-X86 COREBOOT default cbfs FMAP region
#
# position and size of CBFS, relative to BIOS_BASE
FMAP_CBFS_BASE := $(FMAP_CURRENT_BASE)
FMAP_CBFS_SIZE := $(call int-subtract,$(FMAP_BIOS_SIZE) $(FMAP_CBFS_BASE))
endif # ifeq ($(CONFIG_ARCH_X86),y)
$(obj)/fmap.fmd: $(top)/Makefile.inc $(DEFAULT_FLASHMAP) $(obj)/config.h
sed -e "s,##ROM_BASE##,$(FMAP_ROM_ADDR)," \
-e "s,##ROM_SIZE##,$(FMAP_ROM_SIZE)," \
-e "s,##BIOS_BASE##,$(FMAP_BIOS_BASE)," \
-e "s,##BIOS_SIZE##,$(FMAP_BIOS_SIZE)," \
-e "s,##FMAP_BASE##,$(FMAP_FMAP_BASE)," \
-e "s,##FMAP_SIZE##,$(FMAP_FMAP_SIZE)," \
-e "s,##CONSOLE_ENTRY##,$(FMAP_CONSOLE_ENTRY)," \
-e "s,##MRC_CACHE_ENTRY##,$(FMAP_MRC_CACHE_ENTRY)," \
-e "s,##SMMSTORE_ENTRY##,$(FMAP_SMMSTORE_ENTRY)," \
-e "s,##SPD_CACHE_ENTRY##,$(FMAP_SPD_CACHE_ENTRY)," \
-e "s,##VPD_ENTRY##,$(FMAP_VPD_ENTRY)," \
-e "s,##HSPHY_FW_ENTRY##,$(FMAP_HSPHY_FW_ENTRY)," \
-e "s,##CBFS_BASE##,$(FMAP_CBFS_BASE)," \
-e "s,##CBFS_SIZE##,$(FMAP_CBFS_SIZE)," \
$(DEFAULT_FLASHMAP) > $@.tmp
mv $@.tmp $@
else # ifeq ($(CONFIG_FMDFILE),)
$(obj)/fmap.fmd: $(CONFIG_FMDFILE) $(obj)/config.h
$(HOSTCC) $(PREPROCESS_ONLY) -include $(obj)/config.h $< -o $@.pre
mv $@.pre $@
endif # ifeq ($(CONFIG_FMDFILE),)
# generated at the same time as fmap.fmap
$(obj)/fmap_config.h: $(obj)/fmap.fmap
true
$(obj)/fmap.desc: $(obj)/fmap.fmap
true
$(obj)/fmap.fmap: $(obj)/fmap.fmd $(FMAPTOOL)
echo " FMAP $(FMAPTOOL) -h $(obj)/fmap_config.h $< $@"
$(FMAPTOOL) -h $(obj)/fmap_config.h -R $(obj)/fmap.desc $< $@
ifeq ($(CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK),y)
TS_OPTIONS := -j $(CONFIG_INTEL_TOP_SWAP_BOOTBLOCK_SIZE)
endif
ifneq ($(CONFIG_ARCH_X86),y)
add_bootblock = $(CBFSTOOL) $(1) write -u -r BOOTBLOCK -f $(2)
endif
# coreboot.pre doesn't follow the standard Make conventions. It gets modified
# by multiple rules, and thus we can't compute the dependencies correctly.
$(shell rm -f $(obj)/coreboot.pre)
ifneq ($(CONFIG_UPDATE_IMAGE),y)
$(obj)/coreboot.pre: $$(prebuilt-files) $(CBFSTOOL) $(obj)/fmap.fmap $(obj)/fmap.desc $(objcbfs)/bootblock.bin
$(CBFSTOOL) $@.tmp create -M $(obj)/fmap.fmap -r $(shell cat $(obj)/fmap.desc)
printf " BOOTBLOCK\n"
$(call add_bootblock,$@.tmp,$(objcbfs)/bootblock.bin)
$(prebuild-files) true
mv $@.tmp $@
else # ifneq ($(CONFIG_UPDATE_IMAGE),y)
.PHONY: $(obj)/coreboot.pre
$(obj)/coreboot.pre: $$(prebuilt-files) $(CBFSTOOL)
mv $(obj)/coreboot.rom $@.tmp || \
(echo "Error: You have UPDATE_IMAGE set in Kconfig, but have no existing image to update." && \
echo "Exiting." && \
false)
$(prebuild-files) true
mv $@.tmp $@
endif # ifneq ($(CONFIG_UPDATE_IMAGE),y)
ifeq ($(CONFIG_HAVE_REFCODE_BLOB),y)
REFCODE_BLOB=$(obj)/refcode.rmod
$(REFCODE_BLOB): $(RMODTOOL)
$(RMODTOOL) -i $(CONFIG_REFCODE_BLOB_FILE) -o $@
endif
Rampayload: Able to build coreboot without ramstage This patch removes all possible dependencies in order to build platform with CONFIG_RAMPAYLOAD enable(without ramstage). A. Create coreboot separate stage kconfigs This patch creates seperate stage configs as below 1. HAVE_BOOTBLOCK 2. HAVE_VERSTAGE 3. HAVE_ROMSTAGE 4. HAVE_POSTCAR 5. HAVE_RAMSTAGE B. Also ensures below kconfigs are aligned with correct stage configs 1. COMPRESS_RAMSTAGE and RELOCATABLE_RAMSTAGE are now enable if CONFIG_HAVE_RAMSTAGE is selected. 2. COMPRESS_BOOTBLOCK will enable if CONFIG_HAVE_BOOTBLOCK is set 3. COMPRESS_PRERAM_STAGES will enable if CONFIG_HAVE_VERSTAGE || CONFIG_HAVE_ROMSTAGE is selected. C. Also fix compilation issue with !CONFIG_HAVE_RAMSTAGE On x86 platform: Case 1: ramstage do exist: CONFIG_HAVE_RAMSTAGE=1 >> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_x86_32 Case 2: ramstage doesn't exist: CONFIG_HAVE_RAMSTAGE=0 >> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_ This patch fixes Case 2 usecase where platform doesn't select CONFIG_HAVE_RAMSTAGE. Also add option to create sipi_vector.manual based on $(TARGET_STAGE) variable. $(TARGET_STAGE)=ramstage if user selects CONFIG_HAVE_RAMSTAGE $(TARGET_STAGE)=postcar if user selects CONFIG_RAMPAYLOAD Change-Id: I0f7e4174619016c5a54c28bedd52699df417a5b7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-06-08 08:59:02 +02:00
ifeq ($(CONFIG_HAVE_RAMSTAGE),y)
RAMSTAGE=$(objcbfs)/ramstage.elf
else
RAMSTAGE=
endif
add_intermediate = \
$(1): $(obj)/coreboot.pre $(2) | $(INTERMEDIATE) \
$(eval INTERMEDIATE+=$(1)) $(eval PHONY+=$(1))
$(obj)/coreboot.rom: $(obj)/coreboot.pre $(CBFSTOOL) $(IFITTOOL) $$(INTERMEDIATE)
@printf " CBFS $(subst $(obj)/,,$(@))\n"
CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstool Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-10 22:11:50 +01:00
# The full ROM may be larger than the CBFS part, so create an empty
# file (filled with \377 = 0xff) and copy the CBFS image over it.
dd if=/dev/zero bs=$(call _toint,$(CONFIG_ROM_SIZE)) count=1 2> /dev/null | tr '\000' '\377' > $@.tmp
CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstool Some projects (like ChromeOS) put more content than described by CBFS onto their image. For top-aligned images (read: x86), this has traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the area actually managed by CBFS, as opposed to ROM_SIZE) that is used to calculate the CBFS entry start offset. On bottom-aligned boards, many define a fake (smaller) ROM_SIZE for only the CBFS part, which is not consistently done and can be an issue because ROM_SIZE is expected to be a power of two. This patch changes all non-x86 boards to describe their actual (physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a mainboard Kconfig select (which is the correct place to declare unchangeable physical properties of the board). It also changes the cbfstool create invocation to use CBFS_SIZE as the -s parameter for those architectures, which defaults to ROM_SIZE but gets overridden for special use cases like ChromeOS. This has the advantage that cbfstool has a consistent idea of where the area it is responsible for ends, which offers better bounds-checking and is needed for a subsequent fix. Also change the FMAP offset to default to right behind the (now consistently known) CBFS region for non-x86 boards, which has emerged as a de-facto standard on those architectures and allows us to reduce the amount of custom configuration. In the future, the nightmare that is ChromeOS's image build system could be redesigned to enforce this automatically, and also confirm that it doesn't overwrite any space used by CBFS (which is now consistently defined as the file size of coreboot.rom on non-x86). CQ-DEPEND=CL:231576,CL:231475 BRANCH=None BUG=chromium:422501 TEST=Built and booted on Veyron_Pinky. Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71 Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/229974 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9619 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-11-10 22:11:50 +01:00
dd if=$(obj)/coreboot.pre of=$@.tmp bs=8192 conv=notrunc 2> /dev/null
ifeq ($(CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE),y)
# Print final FIT table
$(IFITTOOL) -f $@.tmp -D -r COREBOOT
# Print final TS BOOTBLOCK FIT table
ifeq ($(CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK),y)
@printf " TOP SWAP FIT table\n"
$(IFITTOOL) -f $@.tmp -D $(TS_OPTIONS) -r COREBOOT
endif # CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK
endif # CONFIG_CPU_INTEL_FIRMWARE_INTERFACE_TABLE
mv $@.tmp $@
@printf " CBFSLAYOUT $(subst $(obj)/,,$(@))\n\n"
$(CBFSTOOL) $@ layout
@printf " CBFSPRINT $(subst $(obj)/,,$(@))\n\n"
$(CBFSTOOL) $@ print -r $(subst $(spc),$(comma),$(all-regions))
ifeq ($(CONFIG_CBFS_VERIFICATION),y)
line=$$($(CBFSTOOL) $@ print -kv 2>/dev/null | grep -F '[CBFS VERIFICATION (COREBOOT)]') ;\
if ! printf "$$line" | grep -q 'fully valid'; then \
echo "CBFS verification error: $$line" ;\
exit 1 ;\
fi
endif # CONFIG_CBFS_VERIFICATION
cbfs-files-y += $(CONFIG_CBFS_PREFIX)/romstage
$(CONFIG_CBFS_PREFIX)/romstage-file := $(objcbfs)/romstage.elf
$(CONFIG_CBFS_PREFIX)/romstage-type := stage
$(CONFIG_CBFS_PREFIX)/romstage-compression := $(CBFS_PRERAM_COMPRESS_FLAG)
ifeq ($(CONFIG_ARCH_ROMSTAGE_ARM),y)
$(CONFIG_CBFS_PREFIX)/romstage-options := -b 0
endif
ifeq ($(CONFIG_ARCH_ROMSTAGE_X86_32)$(CONFIG_ARCH_ROMSTAGE_X86_64),y)
# Use a 64 byte alignment to provide a minimum alignment
# requirement for the overall romstage. While the first object within
# romstage could have a 4 byte minimum alignment that doesn't mean the linker
# won't decide the entire section should be aligned to a larger value. In the
# future cbfstool should add XIP files proper and honor the alignment
# requirements of the program segment.
#
# Make sure that segment for .car.data is ignored while adding romstage.
$(CONFIG_CBFS_PREFIX)/romstage-align := 64
$(CONFIG_CBFS_PREFIX)/romstage-options := -S ".car.data"
# If CAR does not support execution of code, romstage on x86 is expected to be
# xip.
ifneq ($(CONFIG_NO_XIP_EARLY_STAGES),y)
$(CONFIG_CBFS_PREFIX)/romstage-options += --xip
# For efficient MTRR utilisation use natural alignment for romstage.
ifeq ($(CONFIG_SETUP_XIP_CACHE),y)
$(CONFIG_CBFS_PREFIX)/romstage-options += --pow2page
endif # CONFIG_SETUP_XIP_CACHE
endif # CONFIG_NO_XIP_EARLY_STAGES
endif # CONFIG_ARCH_ROMSTAGE_X86_32 / CONFIG_ARCH_ROMSTAGE_X86_64
ifeq ($(CONFIG_VBOOT_STARTS_IN_ROMSTAGE),y)
$(CONFIG_CBFS_PREFIX)/romstage-options += $(TXTIBB)
endif
Rampayload: Able to build coreboot without ramstage This patch removes all possible dependencies in order to build platform with CONFIG_RAMPAYLOAD enable(without ramstage). A. Create coreboot separate stage kconfigs This patch creates seperate stage configs as below 1. HAVE_BOOTBLOCK 2. HAVE_VERSTAGE 3. HAVE_ROMSTAGE 4. HAVE_POSTCAR 5. HAVE_RAMSTAGE B. Also ensures below kconfigs are aligned with correct stage configs 1. COMPRESS_RAMSTAGE and RELOCATABLE_RAMSTAGE are now enable if CONFIG_HAVE_RAMSTAGE is selected. 2. COMPRESS_BOOTBLOCK will enable if CONFIG_HAVE_BOOTBLOCK is set 3. COMPRESS_PRERAM_STAGES will enable if CONFIG_HAVE_VERSTAGE || CONFIG_HAVE_ROMSTAGE is selected. C. Also fix compilation issue with !CONFIG_HAVE_RAMSTAGE On x86 platform: Case 1: ramstage do exist: CONFIG_HAVE_RAMSTAGE=1 >> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_x86_32 Case 2: ramstage doesn't exist: CONFIG_HAVE_RAMSTAGE=0 >> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_ This patch fixes Case 2 usecase where platform doesn't select CONFIG_HAVE_RAMSTAGE. Also add option to create sipi_vector.manual based on $(TARGET_STAGE) variable. $(TARGET_STAGE)=ramstage if user selects CONFIG_HAVE_RAMSTAGE $(TARGET_STAGE)=postcar if user selects CONFIG_RAMPAYLOAD Change-Id: I0f7e4174619016c5a54c28bedd52699df417a5b7 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-06-08 08:59:02 +02:00
cbfs-files-$(CONFIG_HAVE_RAMSTAGE) += $(CONFIG_CBFS_PREFIX)/ramstage
$(CONFIG_CBFS_PREFIX)/ramstage-file := $(RAMSTAGE)
$(CONFIG_CBFS_PREFIX)/ramstage-type := stage
$(CONFIG_CBFS_PREFIX)/ramstage-compression := $(CBFS_COMPRESS_FLAG)
# The AMD LPC SPI DMA controller requires source files to be 64 byte aligned.
ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_LPC_SPI_DMA),y)
$(CONFIG_CBFS_PREFIX)/ramstage-align := 64
endif
cbfs-files-$(CONFIG_HAVE_REFCODE_BLOB) += $(CONFIG_CBFS_PREFIX)/refcode
$(CONFIG_CBFS_PREFIX)/refcode-file := $(REFCODE_BLOB)
$(CONFIG_CBFS_PREFIX)/refcode-type := stage
$(CONFIG_CBFS_PREFIX)/refcode-compression := $(CBFS_COMPRESS_FLAG)
cbfs-files-$(CONFIG_SEABIOS_VGA_COREBOOT) += vgaroms/seavgabios.bin
vgaroms/seavgabios.bin-file := $(CONFIG_PAYLOAD_VGABIOS_FILE)
vgaroms/seavgabios.bin-type := raw
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += config
build: List all Kconfigs in CBFS `config` file, compress it The coreboot build system automatically adds a `config` file to CBFS that lists the exact Kconfig configuration that this image was built with. This is useful to reproduce a build after the fact or to check whether support for a specific feature is enabled in the image. However, the file is currently generated using the `savedefconfig` command to Kconfig, which generates the minimal .config file that is needed to produce the required config in a coreboot build. This is fine for reproduction, but bad when you want to check if a certain config was enabled, since many configs get enabled by default or pulled in through another config's `select` statement and thus don't show up in the defconfig. This patch tries to fix that second use case by instead including the full .config instead. In order to save some space, we can remove all comments (e.g. `# CONFIG_XXX is not set`) from the file, which still makes it easy to test for a specific config (if it's in the file you can extract the right value, if not you can assume it was set to `n`). We can also LZMA compress it since this file is never read by firmware itself and only intended for later re-extraction via cbfstool, which always has LZMA support included. On a sample Trogdor device the existing (uncompressed) `config` file takes up 519 bytes in CBFS, whereas the new (compressed) file after this patch will take up 1832 bytes -- still a small amount that should hopefully not break the bank for anyone. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-11-17 02:48:46 +01:00
config-file := $(DOTCONFIG):config
config-type := raw
build: List all Kconfigs in CBFS `config` file, compress it The coreboot build system automatically adds a `config` file to CBFS that lists the exact Kconfig configuration that this image was built with. This is useful to reproduce a build after the fact or to check whether support for a specific feature is enabled in the image. However, the file is currently generated using the `savedefconfig` command to Kconfig, which generates the minimal .config file that is needed to produce the required config in a coreboot build. This is fine for reproduction, but bad when you want to check if a certain config was enabled, since many configs get enabled by default or pulled in through another config's `select` statement and thus don't show up in the defconfig. This patch tries to fix that second use case by instead including the full .config instead. In order to save some space, we can remove all comments (e.g. `# CONFIG_XXX is not set`) from the file, which still makes it easy to test for a specific config (if it's in the file you can extract the right value, if not you can assume it was set to `n`). We can also LZMA compress it since this file is never read by firmware itself and only intended for later re-extraction via cbfstool, which always has LZMA support included. On a sample Trogdor device the existing (uncompressed) `config` file takes up 519 bytes in CBFS, whereas the new (compressed) file after this patch will take up 1832 bytes -- still a small amount that should hopefully not break the bank for anyone. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-11-17 02:48:46 +01:00
config-compression := LZMA
cbfs-files-$(CONFIG_INCLUDE_CONFIG_FILE) += revision
revision-file := $(obj)/build.h
revision-type := raw
cbfs-files-y += build_info
build_info-file := $(obj)/build_info
build_info-type := raw
BOOTSPLASH_SUFFIX=$(suffix $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE)))
cbfs-files-$(CONFIG_BOOTSPLASH_IMAGE) += bootsplash$(BOOTSPLASH_SUFFIX)
bootsplash$(BOOTSPLASH_SUFFIX)-file := $(call strip_quotes,$(CONFIG_BOOTSPLASH_FILE))
bootsplash$(BOOTSPLASH_SUFFIX)-type := bootsplash
Makefile: Add build-time overlap check for programs loaded after coreboot On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-08 02:55:43 +01:00
# Ensure that no payload segment overlaps with memory regions used by ramstage
# (not for x86 since it can relocate itself in that case)
ifneq ($(CONFIG_ARCH_X86),y)
check-ramstage-overlap-regions := ramstage
check-ramstage-overlap-files :=
ifneq ($(CONFIG_PAYLOAD_NONE),y)
check-ramstage-overlap-files += $(CONFIG_CBFS_PREFIX)/payload
endif
# will output one or more lines of "<load address in hex> <memlen in decimal>"
cbfs-get-segments-cmd = $(CBFSTOOL) $(obj)/coreboot.pre print -v | sed -n \
'\%$(1)%,\%^[^ ]\{4\}%s% .*load: \(0x[0-9a-fA-F]*\),.*length: [0-9]*/\([0-9]*\).*%\1 \2%p'
ramstage-symbol-addr-cmd = $(OBJDUMP_ramstage) -t $(objcbfs)/ramstage.elf | \
sed -n '/ $(1)$$/s/^\([0-9a-fA-F]*\) .*/0x\1/p' | \
uniq
Makefile: Add build-time overlap check for programs loaded after coreboot On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-08 02:55:43 +01:00
$(call add_intermediate, check-ramstage-overlaps)
Makefile: Add build-time overlap check for programs loaded after coreboot On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-08 02:55:43 +01:00
programs=$$($(foreach file,$(check-ramstage-overlap-files), \
$(call cbfs-get-segments-cmd,$(file)) ; )) ; \
regions=$$($(foreach region,$(check-ramstage-overlap-regions), \
echo $(region) ; \
$(call ramstage-symbol-addr-cmd,_$(region)) ; \
$(call ramstage-symbol-addr-cmd,_e$(region)) ; )) ; \
pstart= ; pend= ; \
for x in $$programs; do \
if [ -z $$pstart ]; then pstart=$$(($$x)) ; continue ; fi ; \
pend=$$(($$pstart + $$x)) ; \
rname= ; rstart= ; rend= ; \
for y in $$regions ; do \
if [ -z $$rname ]; then rname=$$y ; continue ; fi ; \
if [ -z $$rstart ]; then rstart=$$(($$y)) ; continue ; fi ; \
rend=$$(($$y)) ; \
if [ $$pstart -lt $$rend -a $$rstart -lt $$pend ]; then \
echo "ERROR: Ramstage region _$$rname overlapped by:" \
$(check-ramstage-overlap-files) ; \
exit 1 ; \
fi ; \
rname= ; rstart= ; rend= ; \
done ; \
pstart= ; pend= ; \
done
endif