This patch provides diagnostic information during the STM setup to
indicate when the MSEG is too small for what the STM requires.
The error message includes the configured MSEG size and the MSEG
area that the STM needs.
Change-Id: I88d947e3a0495089be886f6557e4d4d7993e2508
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
When a parallel SMM relocation is being done, there is a good chance
that the value for stm_resource_heap is not consistent across processors.
Rather than holding (via a lock) processors until this value is set and
then flushing the cache so that all processors see the same value, this
solution moves the code such that all processors set it, thus maintaining
parallelism and keeping the code simple.
Change-Id: I2e5385c47124adcd99803337167984b6307af860
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch centralizes the MSEG location calculation. In the current
implementation, the calculation happens in smm_module_loader and
mp_init. When smm_module_loaderv2 was added, this calculation became
broken as the original calculation made assumptions based on perm_smbase.
The calculation is now located in smm_subregion (tseg_region.c), as the
MSEG is located within the TSEG (or SMM);
These patches have been tested on a Purism librem-l1um server.
Change-Id: Ic17e1a505401c3b2a218826dffae6fe12a5c15c6
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55628
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some platforms run the smm_relocation function twice during initialization.
This results in the BIOS resource list becoming twice as long. Also,
testing has shown that elements of the list created in the first interation
may have invalid data included in the resource list.
This patch resolves these issues by reseting the list every time stm_setup
is involked.
This patch has been tested on the Purism L1UM-1X8C
Change-Id: I874871ff01bdf0d00a3e6b48bc885e7abaa25112
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The patch incorporates the STM build as a part of the coreboot
build. A separate patch lists and documents the options that
the developer can use. In most cases the default options will
suffice.
Original-Change-Id: I8c6e0c85edd4e2b0658791553bd9947656e8c796
Original-Signed-off-by: Eugene D Myers <cedarhouse@comcast.net>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/44687
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: ron minnich <rminnich@gmail.com>
Change-Id: I901cb429d8050fb2a7c839e8ef29ac3359239d2c
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55625
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replaced the 'l' with a 'z' to clear up the issue.
Change-Id: I696b615b4dd3bacda7151c91fff17f9b01b17821
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55623
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch adds options that support building the STM as a
part of the coreboot build. The option defaults assume that
these configuration options are set as follows:
IED_REGION_SIZE = 0x400000
SMM_RESERVED_SIZE = 0x200000
SMM_TSEG_SIZE = 0x800000
Original-Change-Id: I80ed7cbcb93468c5ff93d089d77742ce7b671a37
Original-Signed-off-by: Eugene Myers <cedarhouse@comcast.net>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/44686
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: ron minnich <rminnich@gmail.com>
Change-Id: I982cde1299c87b5cf4f495905b53a6c107842956
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Originally a part of security/intel/stm.
Add get_pmbase to the intel platform setup code.
get_pmbase is used by the coreboot STM setup functions to ensure
that the pmbase is accessable by the SMI handler during runtime.
The pmbase has to be accounted for in the BIOS resource list so
that the SMI handler is allowed this access.
Original-Change-Id: If6f6295c5eba9eb20e57ab56e7f965c8879e93d2
Original-Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/37990
Original-Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: I7f9ef32946a17aa0bbcbc375bc34b48e62620694
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
While the gcc(1) driver has the `-nostartfiles` option, ld(1), the
program the coreboot toolchain uses to link the object files, doesn't
have it.
In binutils before 2.36, this option is interpreted as `-n -o
startfiles`, in which the `-o` option is overridden by a later `-o`
option, so only the `-n` option has effect, which is the `--nmagic`
long option of ld(1). So the correct linker option in this place is
`--nmagic`.
It is tested that without `--nmagic`, ld can generate a much bigger
x86_64 romstage, so this option is still needed.
This error is found when trying to update binutils to 2.36 and later
versions, where ld(1) is unable to disambiguate options and reports an
error.
Change-Id: I27dc2209abdc6fec866716a252736c5cf236a347
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61958
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Add information about the OCP Mono Lake mainboard.
Change-Id: I2109cca0e4037a2945bcb7e4d80897b48ada54af
Signed-off-by: Marc Jones <marcjones@sysproconsutling.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57561
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set bmc_boot_timeout and wait_for_bmc to give the BMC more time to respond
before coreboot times out and moves on. Passes IPMI BMC selftest.
Change-Id: I310a08b8c134cf839381675ade2fe7deee9b1909
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55770
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With the current timeout of 1000 cycles of 100 microsecond would see
timeout occurs on OCP Delta Lake if the log level is set to values
smaller than 8. Because the prink(BIOS_SPEW, ..) in ipmi_kcs_status()
creates delay and avoid the problem, but after setting the log level
to 4 we see some timeout occurs.
The unit is millisecond and the default value is set to 5000 according
to IPMI spec v2.0 rev 1.1 Sec. 9.15, a five-second timeout or greater
is recommended.
Tested=On OCP Delta Lake, with log level 4 cannot observe timeout
occurs.
Original-Change-Id: I42ede1d9200bb5d0dbb455d2ff66e2816f10e86b
Original-Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/45103
Original-Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
(cherry picked from commit d04c06b472)
Change-Id: I7046467d41e1feddb07081964466c8189321cb1d
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55769
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If reading the data for the asset_tag fails, that buffer should be
freed, not the one for serial_number.
Original-Change-Id: I2ecaf7fd0f23f2fb5a6aa0961c7e17fff04847f4
Original-Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Original-Found-by: Coverity CID 1419481, 1419485
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/39378
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Original-Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
(cherry picked from commit f8cd291344)
Change-Id: I4947ba4578b5a41a30e487f5572412cb6ed79a1b
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55768
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This define is used to set up the STM SMM Descriptor table tr entry.
Original-Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Original-Change-Id: Iddb1f45444d03465a66a4ebb9fde5f206dc5b300
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/38657
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: ron minnich <rminnich@gmail.com>
Change-Id: I13a237c1372b79756e19d7ecbbd1946a44f2049f
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Remove the Gbe option and enable EHCI1 to match devicetree.cb.
Change-Id: I122175aec313da0800f94da8b2cdf20cc498824f
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54882
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IPMI debug was extra spewy, so add a debug option as SPI and
other drivers have when they need to be debugged.
Original-Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/52449
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
(cherry picked from commit dc12daf277)
Change-Id: If586b5feea74de0e6ed677af18e61dedf1216939
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The 3rdparty submodule 'intel-microcode' has changed the branch from
'master' to 'main'. As we do not set any specific branch name in our
config, it defaults to 'master' which makes
"git submodule update --remote --rebase 3rdparty/intel-microcode"
to fail.
This patch adds the branch name in .gitmodules to match the upstream
name.
Change-Id: I7b6d7921a21af4eb3bcc7ce4e5a8ea21c38c89a3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Clean up the device tree as noted by the coreboot log.
PCI: Leftover static devices:
PCI: 00:02.2
PCI: 00:02.3
PCI: 00:19.0
PCI: 00:1d.0
PCI: 00:1f.5
PCI: Check your devicetree.cb.
PCI: 00:02.2 - Keep - "off" setting disables the root port
PCI: 00:02.3 - Remove - there is no 2.3 root port
PCI: 00:19.0 - Remove - Gigabit controller is disabled on Mono Lake
PCI: 00:1d.0 - Keep - EHCI enable patch to follow
PCI: 00:1f.5 - Remove - Second SATA device not enabled
Change-Id: I200acdda07f6bd6a060de3c4b4d335d9227216ed
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Set the end of post GPIO to the BMC. This gets IPMI working on the BMC.
Change-Id: I1a0055cdfd4a973b5f42570723bd95f1844dd9a7
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Update the FADT for fwts errors for the GPE entries.
Fix GPE0 access size and remove GPE1 address space ID.
Change-Id: Iea43b534fa119d17cb2bafef8f72d73bcba3a650
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
If mainboard devicetree config defines lpc_lgmr, use it to
set up LPC Generic Memory Range register. Also set up
64KiB memory resource.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iec94f7364c332789f75c2562e910ea5db4ffad23
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51717
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Watson v2 mainboard has hardware support and OpenBMC support for IPMI.
Add drivers/ipmi to the device tree of watson v2 mainboard.
Use original device tree for watson mainboard.
TESTED=booted watson v2 board, and tested ipmitool command:
0 | OEM record fb | 2800000000f0ffffffffffffff
Signed-off-by: Ravi Rama <rrama@arista.com>
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I1be653278dbfd704d24756cf82be73bdae4bb13c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51311
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For watson_v2 mainboard variant:
* Enable IPMI_KCS in config.
* In early_mainboard_romstage_entry(), enable LPC IO ports
for IPMI over KCS.
Signed-off-by: Ravi Rama <rrama@arista.com>
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ie0e718b44889678c49f3d61cccd0e33b306fc6f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51310
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
watson_v2 mainboard variant has its own code to be built in. Update
Makefile.inc of mainboard directory to include variant subdirectory.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I21ee1c575b3b6e4278955c12d6e4f7109eb75105
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51308
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update the 4.11_branch to the 2020118 intel microcde release,
which is the current main HEAD.
Change-Id: Ic010594a59b692b18eb40656c283c080c34c4d2c
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50553
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the empty PWRB ACPI device. The power button is controlled by
the fixed power button model in PM1x_EVT_BLK and doesn't have a
control method. The only device in mainboard.asl was PWRB, so remove
the file.
This fixes the FWTS error:
acpi_pwrb: PWR_Button field in FACP should not be zero with ACPI PNP0C0C device.
Change-Id: Idd8c3588694b913b52ca6509332603e3525117b7
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Use smm_module_loaderv2 to support 16core/32thread Broadwell_DE.
Tested SMM handler loads on all 32 threads.
Change-Id: I3a6e17e8590a2af9b4e7c701f8fccfccfa3ea94b
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Xeon-SP Skylake Scalable Processor can have 36 CPU threads (18 cores).
Current coreboot SMM is unable to handle more than ~32 CPU threads.
This patch introduces a version 2 of the SMM module loader which
addresses this problem. Having two versions of the SMM module loader
prevents any issues to current projects. Future Xeon-SP products will
be using this version of the SMM loader. Subsequent patches will
enable board specific functionality for Xeon-SP.
The reason for moving to version 2 is the state save area begins to
encroach upon the SMI handling code when more than 32 CPU threads are
in the system. This can cause system hangs, reboots, etc. The second
change is related to staggered entry points with simple near jumps. In
the current loader, near jumps will not work because the CPU is jumping
within the same code segment. In version 2, "far" address jumps are
necessary therefore protected mode must be enabled first. The SMM
layout and how the CPUs are staggered are documented in the code.
By making the modifications above, this allows the smm module loader to
expand easily as more CPU threads are added.
TEST=build for Tiogapass platform under OCP mainboard. Enable the
following in Kconfig.
select CPU_INTEL_COMMON_SMM
select SOC_INTEL_COMMON_BLOCK_SMM
select SMM_TSEG
select HAVE_SMI_HANDLER
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
Debug console will show all 36 cores relocated. Further tested by
generating SMI's to port 0xb2 using XDP/ITP HW debugger and ensured all
cores entering and exiting SMM properly. In addition, booted to Linux
5.4 kernel and observed no issues during mp init.
Original-Change-Id: I00a23a5f2a46110536c344254868390dbb71854c
Original-Signed-off-by: Rocky Phagura <rphagura@fb.com>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/43684
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
(cherry picked from commit afb7a81478)
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Change-Id: I76bb506de56c816f6c0635bfd990125b789c5877
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Rocky Phagura
Suggested by Nico Huber in CB:38765.
This placement makes the address calculation simpler and
makes its location indepedent of the number of CPUs.
As part of the change in the BIOS resource list address
calculation, the `size` variable was factored out of the
conditional in line 361, thus eliminating the else.
Original-Change-Id: I9ee2747474df02b0306530048bdec75e95413b5d
Original-Signed-off-by: Eugene D Myers <cedarhouse@comcast.net>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/40437
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
Original-Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
(cherry picked from commit 076605bc92)
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Change-Id: Ie62e2bdccd2d09084cc39a0f2fe32df236c08cd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
To mitigate against sinkhole in software which is required on
pre-sandybridge hardware, the smm entry point needs to check if the
LAPIC base is between smbase and smbase + smmsize. The size needs to
be available early so add them to the relocatable module parameters.
When the smmstub is used to relocate SMM the default SMM size 0x10000
is provided. On the permanent handler the size provided by
get_smm_info() is used.
Original-Change-Id: I0df6e51bcba284350f1c849ef3d012860757544b
Original-Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/37288
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@google.com>
(cherry picked from commit a3eb3df01c)
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Change-Id: I4948639a513b196382eb38616fe872b72bb7e59e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Check to ensure that dual monitor mode is supported on the
current processor. Dual monitor mode is normally supported on
any Intel x86 processor that has VTx support. The STM is
a hypervisor that executes in SMM dual monitor mode. This
check should fail only in the rare case were dual monitor mode
is disabled. If the check fails, then the STM will not
be initialized by coreboot.
Original-Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Original-Change-Id: I518bb2aa1bdec94b5b6d5e991d7575257f3dc6e9
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/38836
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Nico Huber <nico.h@gmx.de>
(cherry picked from commit 5544f62746)
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Change-Id: I312570ca28329490006283251f69dd83ef64af40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50309
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
This update is a combination of all four of the patches so that the
commit can be done without breaking parts of coreboot. This possible
breakage is because of the cross-dependencies between the original
separate patches would cause failure because of data structure changes.
security/intel/stm
This directory contains the functions that check and move the STM to the
MSEG, create its page tables, and create the BIOS resource list.
The STM page tables is a six page region located in the MSEG and are
pointed to by the CR3 Offset field in the MSEG header. The initial
page tables will identity map all memory between 0-4G. The STM starts
in IA32e mode, which requires page tables to exist at startup.
The BIOS resource list defines the resources that the SMI Handler is
allowed to access. This includes the SMM memory area where the SMI
handler resides and other resources such as I/O devices. The STM uses
the BIOS resource list to restrict the SMI handler's accesses.
The BIOS resource list is currently located in the same area as the
SMI handler. This location is shown in the comment section before
smm_load_module in smm_module_loader.c
Note: The files within security/intel/stm come directly from their
Tianocore counterparts. Unnecessary code has been removed and the
remaining code has been converted to meet coreboot coding requirements.
For more information see:
SMI Transfer Monitor (STM) User Guide, Intel Corp.,
August 2015, Rev 1.0, can be found at firmware.intel.com
include/cpu/x86:
Addtions to include/cpu/x86 for STM support.
cpu/x86:
STM Set up - The STM needs to be loaded into the MSEG during BIOS
initialization and the SMM Monitor Control MSR be set to indicate
that an STM is in the system.
cpu/x86/smm:
SMI module loader modifications needed to set up the
SMM descriptors used by the STM during its initialization
Original-Change-Id: If4adcd92c341162630ce1ec357ffcf8a135785ec
Original-Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Original-Reviewed-on: https://review.coreboot.org/c/coreboot/+/33234
Original-Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Original-Reviewed-by: ron minnich <rminnich@gmail.com>
(cherry picked from commit ae438be578)
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Change-Id: Ic0131fcada9f43c9817c8a0a942d0419c7023130
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
It was initially applied to Wedge100 and MonoLake in CB:30290
and the issue has now been observed on Watson as well.
Original change: [CB:30290][commit 817994c1be]
Signed-off-by: Deomid "rojer" Ryabkov <rojer9@fb.com>
Change-Id: Ica9557ff159321abed55f9402aee626f18fe526b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50307
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is consistent with how other binaries (e.g. FSP) are added via
Kconfig. This also makes it more visible that things need to be
configured.
Change-Id: I399de6270cc4c0ab3b8c8a9543aec0d68d3cfc03
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Include the soc uncore.asl for the uncore irq routing. Generates
the same asl.
Change-Id: I2062520a06626f86fb0d78e8b23533f987b37ca0
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Latest IASL version (20200717) leads to a build error on 4.11_branch.
dsdt.asl 1121: Device (UNC0)
Warning 3073 - Multiple types (Device object requires either a _HID or
_ADR, but not both)
This warning reported as error was ignored in older IASL versions.
The address object (_ADR) is not needed because a valid hardware ID
(_HID) for the device is available.
Change-Id: Iae5c91739ed9caea2dbb5996e2f093ed6fc47e93
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
The current size of RO_VPD (and RW_VPD) is too small. We have case that
adding VPD parameters silently corrupts the coreboot region next to
RO_VPD.
Increase the size of both RO_VPD and RW_VPD to 0x4000 bytes.
TESTED=build coreboot image for watson, add large size VPD parameter to
the image, boot watson server into target OS.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I428b7de6462b47492d9526042018395d2f99cb2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
When INTEL_TXT is set, at romstage entry check if startup ACM worked correctly
by probing TXT_ERROR register.
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I6f423df8b05dc44220a9bad3674f687bac94e335
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42713
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add TXT ramstage driver:
* Show startup errors
* Check for TXT reset
* Check for Secrets-in-memory
* Add assembly for GETSEC instruction
* Check platform state if GETSEC instruction is supported
* Configure TXT memory regions
* Lock TXT
* Protect TSEG using DMA protected regions
* Place SINIT ACM
* Print information about ACMs
Extend the `security_clear_dram_request()` function:
* Clear all DRAM if secrets are in memory
Add a config so that the code gets build-tested. Since BIOS and SINIT
ACM binaries are not available, use the STM binary as a placeholder.
Tested on OCP Wedge100s and Facebook Watson
* Able to enter a Measured Launch Environment using SINIT ACM and TBOOT
* Secrets in Memory bit is set on ungraceful shutdown
* Memory is cleared after ungraceful shutdown
Change-Id: Iaf4be7f016cc12d3971e1e1fe171e6665e44c284
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
(cherry picked from commit 5f9f77672d)
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42712
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Commit c1dc2d5e68 (mb/lenovo/t60: Switch to override tree) converted
these boards to override trees, but some device nodes were missed.
Said nodes are essential, as `chip` configuration data is always tied
to device nodes. The resulting `static.c` contained multiple copies
of the `chip` configuration structs, but the wrong ones were hooked up.
The therefore missing configuration of the clockgen led to general
instability, especially with SMP under Linux (probably due to the
attempt to enter lower C states on an idle core). Passing `maxcpus=1`
to the Linux kernel served as a workaround.
Change-Id: I6c26d633d1860cf9a5415994444e75ae1c2e59ad
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43065
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=Use "dmidecode -t 16" in Linux to check if SMBIOS type 16 exists
Change-Id: Ie057742112f14447b226d432417d9301d4aea958
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37233
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select VPD, GENERATE_SMBIOS_TABLES, VPD_SMBIOS_VERSION so that
"firmware_version" key value in RO_VPD is reported in smbios type
0 as BIOS version.
TEST=Build coreboot image for WatsonV2, run "vpd -s
firmware_version=FB_OSF_1.2 -i RO_VPD -f build/coreboot.rom"
command to add firmware_version key value pair in RO_VPD,
flash the image to WatsonV2 and reboot it, run dmidecode to verify:
[root@localhost ~]# dmidecode -t 0
...
BIOS Information
Vendor: coreboot
Version: FB_OSF_1.2
...
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I31fb2cef01161175a0c01094c5445f7fa340f2d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: insomniac <insomniac@slackware.it>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Eugene Myers