This README.md file specifies the expectations and agreements implied by
contributing code to the coreboot src/vendorcode directory.
Licenses, structure, formatting and the like are all the responsibility
of the contributors, however as the code is a part of the coreboot
codebase, members of the coreboot community are allowed to modify the
code to the extent deemed necessary.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib7e2aedce9383158d03be342cb10ae18d85146ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67485
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Librem Mini has a UART (accessible with soldering), which is very
useful for work on coreboot. It can be used for coreboot/SeaBIOS/Linux
boot logs, or as a general purpose UART.
Change-Id: I38ad5f19da6af5ed286ad3583f34b824a3660916
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68551
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure the Intel iGPU as primary video adapter if enabled according
to EEPROM settings. The default is to use the ASPEED BMC as primary
video adapter, which only has a VGA output and the remote KVM output.
For now, use the FSP GOP driver to light up the iGPU. There are several
issues with libgfxinit on the Hermes, probably due to the unusual setup
of the iGPU's display outputs. They are routed to a mezzanine connector
for a piggy-back sub-board, of which there are two models. The Poseidon
piggy-back has two DisplayPort outputs and an HDMI output coming from a
MegaChips LSPCON. The Avalanche piggy-back routes all three DisplayPort
outputs from the iGPU into a FPGA, which acts as a DisplayPort sink.
Note that the FSP GOP only initializes at most 2 iGPU display outputs.
However, all three outputs function properly once OS (Windows, Linux)
graphics drivers take over.
Additionally, update the config file that Prodrive uses to build
coreboot images so that the iGPU can be used as primary.
TEST=Verify that the iGPU's outputs work properly in pre-OS, Windows and
Linux, on both the Poseidon and Avalanche piggy-backs.
Change-Id: I24d9ebc2055dc246e7f257aa2f3853b22c8af370
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62649
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On the intel/glkrvp
compressed:
- romstage: 29659
- verstage: 31303
non compressed:
- romstage: 46244
- verstage: 47012
On qemu (with some additional patch to not run XIP)
compressed:
- romstage: 11203
non compressed:
- romstage: 13924
Even with a small romstage the size improvements are substantial,
which should result in a speedup when loading the stage. On the
up/squared loading romstage is sped up by 9ms.
TESTED: successfully boot the up/squared & google/vilboz.
Change-Id: I6906c8b6df45f2433d92d2ff1d1748cc4926c73a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Some platform run early stages like romstage and verstage from CAR
instead of XIP. This allows to link them like other arch inside the
_program region. This make in place LZ4 decompression possible as it
needs a bit of extra place to extract the code which is now provided by
the .bss.
Tested on up/squared (Intel APL).
Change-Id: I6cf51f943dde5f642d75ba4c5d3be520dc56370a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48156
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This patch drops `ufs.asl` from the local SoC directory.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I84e0b51e74e2d6a7120f1d990152bc27e37a501f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68302
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
This patch includes UFS ASL entry from common block ACPI code.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia77ea1c915d0dec991afa5b977af78487ae6a8b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68301
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
This patch migrates UFS ASL entry from Alder Lake SoC to common
block ACPI code to be able to be utilized across different IA SoCs.
Additionally, migrate to ASL2.0.
BUG=none
TEST=Able to build and boot Google/Kano.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2e803138a20fd1fc3cdcd5c0fbbb1254663bb8dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68300
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com>
Set _STA to 0xB for GOOG000C/GOOG000E devices to prevent showing
as missing drivers under Windows.
Change-Id: I0887fd6e18528d2c8523e7bc66db9efaa31adf5d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68462
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The ISH build target used for nissa is called adl_ish_lite: CL:3925007,
and by default the binary is installed as
/lib/firmware/intel/adl_ish_lite.bin
We could change the installed name, but it's nicer to keep it consistent
with the build target, so change the name in coreboot instead.
BUG=b:234776154
TEST=Build and boot nirwen, check firmware name is updated in SSDT
Change-Id: I983a38d08e758cf5a12a3f91a601c7e57d42c0cb
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68466
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
1. Set the PL1, PL2 and PL4.
2. Set PsysPL2 and PsysPmax.
BUG=b:253380352 b:253542746
TEST=Compare the measured power from adapter with the value of 'psys'
from the command 'dump_intel_rapl_consumption'.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I0a7ff64689b39e7754e0aed2f6869881a682fc93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68437
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59985f283f1694beeacb0999340111146fa3f39b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Move i2c SoC related code from early_fch.c to i2c.c
TEST=build boards for each SoC
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I69d4b32cf95ce74586bd8971c7ee4b56c1c2fc04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Update the GPIO definitions for morgana per PPR #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7fa4aaf81b5487f7548f430cb35630aca8be732f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Remove the ACPI ALS device from the EC configuration for newer devices,
because some do not have light sensors, and those who do have their ALS
presented through the new EC sensor interface already.
Inspired from commit ("f13e2501525f ("UPSTREAM: mainboard/google/eve: Remove ACPI ALS device")
BUG=b:253967865
BRANCH=none
TEST=Boot a device and ensure that 'acpi-als' device is not present
in /sys/bus/iio/devices.
Change-Id: Ibcfa9e8c5a4679d557150998fd255789d3f8a272
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68493
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SAR-related Kconfigs are only used by ChromeOS, and should be guarded
properly as such (as most other boards do).
TEST=build glados w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not
selected.
Change-Id: Id8abf68ed2e9720b5580f7965208dbe36460af07
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68458
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SAR-related Kconfigs are only used by ChromeOS, and should be guarded
properly as such (as most other boards do).
TEST=build reef w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not
selected.
Change-Id: I4fe3092e620bcbc33b0411ea69e55154fc118aa4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68457
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SAR-related Kconfigs are only used by ChromeOS, and should be guarded
properly as such (as most other boards do).
TEST=build sarien w/o CONFIG_CHROMEOS, verify SAR-related Kconfigs not
selected.
Change-Id: I424033e087bc37c651a922273718fc229b720448
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68456
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the GSC is ready for the next transaction, it triggers a
GSC_AP_INT_ODL (active low) pulse with 100us duration to notify the AP.
Currently the TPM IRQ is configured as EDGE_RISING. Changing it to
EDGE_FALLING would speed up each register access by 100us. On Kingler,
this saves 20ms for the boot time (0.93s -> 0.91s).
BUG=b:235185547
TEST=emerge-corsola coreboot
TEST=Kingler booted without TPM errors
BRANCH=none
Change-Id: Id282e0f35694bd151781845cbd5aa4b389a30ddc
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
To help make sure that future releases are done correctly and on time,
we are setting up a team with the shared responsibility for doing the
releases and maintaining the release notes, scripts, and documentation.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5ef5b10fce9b16241de548df225fd12c9a7e199f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
When "make symlink" is run, it looks for symlink.txt files recursively
under site-local directory, and make symbolic links accordingly.
"make clean-symlink" removes the symbolic links made.
One application is for development of support for new processors and/or
new mainboards, where new directories are added, along with some common
code changes.
Change-Id: I3fa119675ecca1626d70375a61e8a71abec6a53b
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Setting up HT resource seems to be copied from the old native family10
code. It is however not used as no device has a child device below 18.0
in any of the fam15tn board device trees.
Setting up HT resources is therefore done by AGESA and resource
allocation mostly happens to work.
Change-Id: I7edf19f71095fb38161f19d511997cdc2fe0d76c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Setting up HT resource seems to be copied from the old native family10
code. It is however not used as no device has a child device below 18.0
in any of the fam15tn board device trees.
Setting up HT resources is therefore done by AGESA and resource
allocation mostly happens to work.
Change-Id: Id95e2dec4a6f3e70234fff1df67ee61e08731400
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68411
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The current SMBIOS for coreboot is missing processor info for Alder Lake and Raptor Lake SoC, specifically, voltage, max speed,
and upgrade (socket type). This patch implements upgrade function.
Refer to SMBIOS spec sheet for documentation on cpu socket values:
https://web.archive.org/web/20221012222420/https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
BUG=NONE
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that SMBIOS processor upgrade value is correct.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I5796d31fa2d31b17afa5eddde0799b0f68d69909
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68024
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
X9SAE has a PS/2 controller for keyboard and mouse but its definition
in ACPI used to be missing, and X9SAE used to use a generic SuperIO
support initially generated by autoport, so the full NCT6776 support
is added here like x9scl.
Test result:
Log lines like
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
become
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
and more sub-devices within SuperIO is handled by the PNP driver.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ie5e73e8c3fc4e57c6683d7a7ca70e96c64dd9366
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This code is identical for all non-CAR AMD SoCs, so factor it out to
soc/amd/common/block/cpu/noncar/bootblock.c to avoid code duplication.
Also integrate the bootblock.c improvement to include cpu/cpu.h which
provides cpuid_eax from commit 68eb439d80 ("soc/amd/picasso: Clean up
includes").
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I42e4aa85efd6312a3ab37f0323a35f6dd7acd8e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Rename soc/amd/common/block/cpu/smm/smi_ampc_helper.c to smi_apmc.c and
add the fch_apmc_smi_handler function.
Remove the duplicated function from picasso, cezanne, mendocino, and
morgana SoC.
The stoneyridge soc does not implement the APM_CNT_SMMINFO handler, so
give the handler a unique name that does not conflict with the common
handler name.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e6fb59a1ee15b075ee3bbb5f95debe884b66789
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68441
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
The 4.19 release is planned for January 2023. Please add any updates to
the coreboot code that are should go into the notes between now and
then. This helps in that you get to phrase the update the way you want,
and it lessens the load for the release managers.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ib5a7ddfc6cb1a8e0a485c1e1810631c86f4083c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Enable PMC in devicetree so that resources are allocated properly
for it.
Tested on StarLite Mk III & IV, and both can power on correctly.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ib4384b55751a9979e470dd04f6814d4ca170ff34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67409
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reset the XHCI controller prior to S5 to avoid XHCI preventing shutdown.
Linux needs to put the XHCI into D3 before shutting down but the
powerstate commands do not perform a reset.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3be70443eb85a7dff8055c9de0ca2fd89f4fc88d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67678
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9377c3b65aa342f754c303148b0b8d826d05bb94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67662
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Configure FSP S UPDs to allow coreboot to handle the lockdown.
The main change here is setting `Write Protection Support` to 0,
as the default is Enabled, which shouldn't allow writes (even though
it seems to).
The UPDs are identical on APL and GLK, but all ones configured
in this patch have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I1f6e5344cab2af7aa6001b9ec0f07b043a9caa8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Martin Roth