Here, vga_disable stored but we read it only if MAINBOARD_DO_NATIVE_VGA_INIT.
Found-by: scan-build 7.0.1-8
Change-Id: I5c359df71568b56f48eca9615c6265da33d4a073
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34331
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Correct all GPIOs with reference to the Apollo Lake SoC EDS Vol 4
revision 2.4 chapter 10.1.2.3 List of Pins that are GPIOs but cannot be
used in Function 0 (GPIO) mode.
In additional, set an internal pull to any GPI that does not have an
external resistor so that the input is not in an undefined state.
Change-Id: Ia8fe457eddbed0f4ee6bff9ef9dd7a92545be40b
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
The limitation for SD-Card was originally only made for mc_apl2
mainboard. Since other mc_apl mainboards also use the SD-Card interface,
the speed mode setting is made in the parent mainboard_final.
In additional, all UHS-I bus speed modes are disabled because of a
limitation for industry use cases. This means that only HS mode is
permitted.
Change-Id: I2f1b51f13a53c2507c52d6a169d6384b8570b3bc
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
This patch makes VGPIO_3 GPIO PIN output and low independent of
cnvi is connected or not.
BUG=b:123062346
BRANCH=None
TEST=boot up Hatch device and make sure VGPIO_3 gpio pin is driven low.
Change-Id: I629b99676f56747de1b244724709e14069250097
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34376
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Taken from
"Intel 6 Series Chipset and Intel C200 Series Chipset"
Document Number: 324645-006 and
"Intel 5 Series Chipset and Intel 3400 Series Chipset"
Document Number: 322169-004 and
"Intel 6 Series Chipset"
Document Number: 324645-001.
UPDCR was found in GNU/Linux's drivers/pci/quirks.c.
DMC2 was guessed as it's close to DMC and defined for 5 series chipset.
Test:
Run BUILD_TIMELESS=1 and compared the coreboot.roms, no differences.
Change-Id: I4fed7c38078cabd4308424c7547416e87c9e6fa7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This CL allows that everyone can use main() in lib/bootblock.c
even if you select CONFIG_BOOTBLOCK_CUSTOM. I also rename main
functions used in some soc/ to avoid the collision with the
main function defined at lib/bootblock.c.
Change-Id: I0575c9d1ce9dea9facfcc86760dff4deee9c1e29
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34250
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The GCFC (Graphics Clock Frequency Control) read is not used at
the line below.
As the default value is zero, let's remove unused read.
Found-by: scan-build 7.0.1-8
Change-Id: I82c567e3a5b0c0c4a8596ea0cb7693667c71b720
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The code currently checks that 4 <= dev_index <= 10, which after
subtraction by 4 can index into an array of length at most 7. This is
fine for the largest cpl array (which does have length 7), but is
too large for some of the others, which are smaller. This adds bounds
checks for each array access to ensure they are all within bounds.
Change-Id: I1610d35ca6cbb6cfb42c251e75b0e8b22b64252b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229676
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Only needed in ramstage, and only for MP tables.
Change-Id: Ia7c1e153b948aeefa4c3bea4920b02a91a417096
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33922
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Makefile.inc allows extending site-specific configurations.
This change is to allow make utility to list supported options,
irrespective of a .config file availability.
Change-Id: I7c968c773c368ea74689b9741c4c978c35110187
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The speed argument should be one of the six values from the mem_clock
enum, so something is very wrong if this is not the case. Better to
die now than return 0, which will cause a division-by-zero error
later on where this function is called. The first two speeds are also
unsupported and have the same problem with returning 0, so die on those
as well.
Change-Id: Ib628c0eed3d6571bdde1df27ae213ca0691ec256
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1391088
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33409
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If the decoded SPD DRAM frequency is slower than the controller minimum,
then there will be an unsigned integer underflow in the following loop,
which will lead to a very large out of bounds array access. Ensure this
does not happen.
Change-Id: Ic8ed1293adfe0866781bd638323977abd110777e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1229675
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Judging from the state machine on page 281 of the Rockchip RK3288
Technical Reference Manual (Rev 1.0 - Jun 2015), the fall through
from the INIT_MEM -> CONF states is intentional, since that is the
only way to get to the ACCESS state. Add a comment to explain this.
Change-Id: I1d0cfea07211c54d6a906f5a7481c2c760f8ef0d
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1291959
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Add config parameter for Merlin Falcon (SOC_AMD_MERLINFALCON) and modify
the Makefile.inc based on this config parameter.
BUG=none.
TEST=Tested later with padmelon board.
Change-Id: Id9f960b8f012c5a1cfd398611d6a51838493da27
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
- Add CPU, MCH & IGD IDs for new Coffeelake SKUs
- Add PCH, LPC, SPI IDs for CNP-H PCH CM246 & C246
- Make some minor alignments & naming corrections to align with the rest
TEST= build, boot to both Linux & windows OS on CFL H & S platforms
and verified all the device Id's in serial console logs.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: I343b11ea8d9c33eb189d7478511a473b145f4ab4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Fix regression with commit
903b40a soc/intel: Replace uses of dev_find_slot()
Platforms where FSP hides PCI devices before enumeration
may halt with error message 'PCI: dev is NULL!'.
The workaround here is to print an error message revealing
the faulty source code function and revert to old behaviour
of dev_find_slot().
Change-Id: I5eab3e7f1993b686103eaa257aacda379dc259fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34285
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initial support for Portwell PQ7-M107 (Q7) module.
Code based on Intel Strago mainboard.
BUG=N/A
TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107
Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Move the SMM lock outside the function as it is renamed.
Replace conditional !PARALLEL_MP with SMM_ASEG to better
reflect the use.
Change-Id: I93bf0d2f711f94a5bb741bdcd92c1e0fec228684
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The code should probably set SCI routing if built
with HAVE_SMI_HANDLER=n.
Change-Id: I0ada4b2a16490a15d8036a9425c4f768f7b8f218
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Currently, bluetooth FW is not loaded after a reboot. In order to do
this, we have to disable the bluetooth disable gpio (GPP_C14) in
bootblock and re-enable it in ramstage.
BUG=b:137307516
BRANCH=None
TEST=boot up Hatch device and make sure (in dmesg) that proper
bluetooth FW in loaded
Change-Id: Ic5e447d9de57790f7a100e9e03f36b047c19d8f9
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34354
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIOs related to power sequnce are
GPIO_67 - EN_PP3300
GPIO_117 - FULL_CARD_POWER_ON_OFF
GPIO_161 - PLT_RST_LTE_L
1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161
2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67
3. Power reset:
- keep GPIO_67 and GPIO_117 high and
- pull down GPIO_161 for 30ms then release it.
BUG=b:137033609
BRANCH=octopus
TEST=build image and verify on the DUT with LTE DB.
Change-Id: I7bf6fee087c885c22363b44aa98aa61f91be90b4
Signed-off-by: Marco Chen <marcochen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
These configuration files can be used to build Kodama firmware.
BUG=b:135490566
TEST=check variant: kodama via make menuconfig; make -j
Change-Id: I72e80e800ba041df1dda2b0f84470d1ef58bc946
Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33616
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are two hard things in computer science: cache invalidation,
naming things, and off-by-one errors. -- Anonymous
var_num records the number of initialized entries in the reg_var array.
However, this means the index of the last initialized element is one
less than the value of var_num, so we need to take that into account
when indexing into the array. This has already been fixed in several
other places (eg. sb/amd/pi/hudson/lpc.c), so let's also do so here.
Change-Id: Ibefabaca42866a3f2b22eff979c73badf86ac317
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
512 bytes is much too big for this buffer, which only needs to hold a
path that will have a length of at most 20. The large buffer size also
triggers a -Wformat-truncation warning with GCC since it is later
printed into the smaller temp_string array, so shrink it down to
something reasonable.
Change-Id: I6a136d1a739c782b368d5035db9bc25cf5b9599b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The FSP_CAR option has additional configuration options whose default
values result in boot failures. Since default values should always boot,
default to the open-source CAR NEM Enhanced implementation instead. This
also allows us to get rid of an unnecessary vendor-specific special case.
Change-Id: I30b1808f91701c07dce6f1de08c213150e8a675a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34287
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Make the title for lesson 1 match the format used for lesson 2 and the
lessons index, for consistency purposes.
Change-Id: I133d758ddf4974096cbf9f10ae96c148fc859efc
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Set the controller state to D0 during the i2c init sequence, this ensures
the controller is up and active.
BUG=b:135941367
TEST=Verify no timeouts seen during I2C controller enumeration sequence
Change-Id: I247ede44b8d1d6871e3e813b63f99a7f6398dd72
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34273
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add function to set the power state of a LPSS controller.
The API implemented can be used to enforce controllers in
active state(D0) during initialization.
BUG=b:135941367
Change-Id: I7540924885350de64caff91d920d6cc234154616
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34272
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Elan's touchpad requires min 0.3us data hold time.
To fine tune the data hold time of i2c1 to meet
specification of Elan's touchpad.
BUG=None
BRANCH=None
TEST=Verified data hold time of i2c1 is around 320ns
Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com>
Change-Id: I0fa9db3b50e74f193261be96bd9e305bb19841e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Crews <ncrews@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
For AMD's Family17h processors, verstage needs to be run in the PSP,
before memory is initialized. This adds that binary into the PSP
directory.
See the Family17h documentation in the coreboot documentation directory
for more information.
BUG=b:137338769
TEST=Build, add test binary to mandolin board, boot
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I29002a1af51c59a2e6c715e15f3dc63e59cd5729
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
- Correct command line argument for microcode patches from -u to -O
- Add #if PSP_COMBO around new_combo_dir() as it's only called when
that's enabled.
- Remove unused variable in integrate_bios_firmwares()
- Correct enum type from amd_fw_type to amd_bios_type in
register_fw_addr()
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I51c6dbe700505bc2e32443000ae55cb644051e42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
As Intel doesn't even document known bugs add a list of
FSP bugs here.
Change-Id: I07819b83fb0c9437fc237472dfe943f78738347a
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34239
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SOR_LINK_SPEED_G5_4 is unsupported, but it is not invalid, so it
suffices to return here instead of printing the next warning message.
Change-Id: Ifca3c52635e9a39af42e6616821d1099c43c237c
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1293137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
last_unitid is immediately overwritten in the do loop, so this assignment
is not needed. This a relic from old code that commit 13f1c2af8b made
obsolete, but was never removed.
Change-Id: I2eecddd025f7a64b0a70fc07a61ebb43aba757d6
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: scan-build 8.0.0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The JUnit output from the libpayload builds was getting deleted by the
coreinfo build. Move the libpayload to later in the coreboot-gerrit
job.
Also add messages to stdout indicating the various libpayload configs
that are built and a message indicating when all libpayload builds are
complete.
BUG=b:137380189
TEST=Upload test commit that includes a libpayload compile error and
verify buildbot fails.
Change-Id: I43b55f402216582dcf81be34171437be345572ab
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34183
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
USB device id does not get included because of the logical OR operation.
Fix encoding the USB device path.
BUG=None
BRANCH=None
TEST=Boot to ChromeOS.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I79317da6d9c7cd177bd7bbbba1f1ccebe076930a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34245
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Angel Pons