Enable PSE GBE with following changes:
1. Configure PCH GBE related FSP UPD flags
2. Add PSE GBE ACPI devices
3. Refactor PCH GBE FSP-S code and merge it together
with PSE GBE code
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: If3807ff5a4578be7b2c67064525fa5099950986a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The Intel® Programmable Services Engine (Intel® PSE) is a
dedicated offload engine for IoT functions powered by an ARM
Cortex-M7 microcontroller. It provides independent, low-DMIPS
computing and low-speed I/Os for IoT applications, plus
dedicated services for real-time computing and time-sensitive
synchronization.
The PSE hosts new functions, including remote out-of-band
device management, network proxy, embedded controller lite
and sensor hub.
This CL enables the user to provide the base address of the
PSE FW blob which will then be loaded by the FSP-S onto the
ARM controller. PSE FW will do the initialization work of
PSE controller and its peripherals. The loading of PSE FW
should have negligible impact on boot time unless PSE
controller could not locate the PSE FW and FSP will attempt to
redo PSE FW loading and wait for PSE handshake until it times
out. Once PSE controller locate the PSE FW, it will do
initialization concurrently by itself with coreboot booting.
It also adds PSE related FSP-S UPD settings which enable the
setup of peripheral ownership (assigned to the PSE or x86
subsystem) and interrupts. These assignments need to take
place at a given point in the boot process and cannot be
changed later.
To verify if PSE FW is loaded properly, the user could enable
PchPseShellEnabled flag and the log will be printed at PSE UART
2.
For further info please refer to doc #611825 (for HW overview)
and #614110 (for PSE EDS).
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Ifea08fb82fea18ef66bab04b3ce378e79a0afbf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Constructed out of a mix of autoport results, p8z77-m_pro, and
tool dumps.
Working:
- Core i7-3770K CPU
- SeaBIOS 1.13.0 boot to Linux 5.4.24 and Windows 10 1903
(all further tests are under these versions)
- USB2 / USB3
- SATA
- Gigabit ethernet
- CPU temp sensors (memtest86+ 5.0.1)
- Hardware monitoring under Linux
- Native and MRC raminit
- PCIe GPU in both "PCIEX16" slots (16x/4x, nVidia Quadro 600)
- Integrated graphics with Intel OpROM and libgfxinit (all ports)
- Serial port
- Windows with libgfxinit framebuffer
- 2ch sound playback, Linux and Windows
Not working:
- PS/2 mouse
- 6ch analog audio out
- PCI POST card in PCI slot
Untested:
- PS/2 keyboard
- Internal USB3 ports
- Digital audio out
Change-Id: If756e791ddce747cb1706414be8e41e83f88922b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Fast-k flow may need to re-init header because mrc_cache doesn't
store header. Storing header together with dparam data is better
for data consistancy.
TEST=fast calibration pass on Corsola
BUG=b:204226005
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I22982923dce06c9e770aa4f20f3dcd2f33685d84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Check for situations where a Type C device isn't useful and avoid
creating one for those scenarios.
BUG=b:215199976
TEST=Tested on brya; verified that USBC device is created.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Tested-by: Alyssa Ross <hi@alyssa.is>
Change-Id: I5e1598bd637ec9f50e7bf8dab9e3c757a30b9848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Compared to Cezanne there are 3 more UARTs controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id98767197a21cb1a61f54fc9b256b10a9506c791
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Compared to Cezanne there are 3 more UARTs with DMA controllers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a3d255bb4976a55623f3a161e791e80f1d01c69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Let's increase this to avoid losing any logs.
BUG=b:213828947
TEST=Boot guybrush and no longer see
*** Pre-CBMEM romstage console overflowed, log truncated!
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Replace the Renoir/Cezanne PCI IDs with the Sabrina ones that were added
in commit 27b02c2eee (include/device/
pci_ids.h: add PCI IDs for AMD Family 17h Model A0h SoC).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I427df6f8e8c08fb47ae8513b6cf1085d4294e28f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
To have the new AMD Sabrina SoC code tested, add the AMD Chausie
mainboard as a copy of Majolica. This patch also changes the name from
Majolica to Chausie, selects the Sabrina SoC instead of the Cezanne SoC
and comments out the APCB_SOURCES since those aren't available in the
3rdparty/blobs repository yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic7b18f7a6ae5b8365234dd1227e0b1f7f37279da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Document #55758 Rev. 1.13 says that family 17h models 30h-3Fh and later
use the spi_readmode_f17_mod_30_3f struct element for SPI_MODE_FIELD and
spi_fastspeed_f17_mod_30_3f for SPI_SPEED_FIELD, so also use this for
The AMD Sabrina SoC which is family 17h models A0h-AFh.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I336f9ea4a0defdf34e1af4b6d568cfe46488f75e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The Cezanne SoC code was initially started as a copy of example/min86
which only provides enough code to make the SoC code build. Then the
different parts of the real SoC support was brought in patch by patch
which also helped cleaning up and untangling the code. Since the Cezanne
SoC code is now in a rather good shape and the Sabrina SoC is similar to
the Cezanne SoC from the coreboot side, the new SoC support is started
with a copy of the Cezanne code and all the needed changes will be
applied on top of that. In order for the build not to fail due to
duplicate files, this patch does not only copy the directory, but also
replaces most instances of the Cezanne name with Sabrina. Since the
needed blobs aren't available in the 3rdparty/amd_blobs repository yet,
the Cezanne blobs are used for now so that the build will succeed. As
soon as the proper blobs will be available in that repository, the code
will be switched over to use them.
As suggested by Nico, I added a "TODO: Check if this is still correct"
comment to the beginning of every copied file and all SOC_AMD_COMMON_*
Kconfig option selects which will be removed after re-verifying that
each file and each selected common code block is still correct for the
new SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I978ddbdbfd70863acac17d98732936ec2be8fe3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The AMD Sabrina SoC will be using the FSP driver to call into the
corresponding FSP binary to do its part of for the silicon
initialization, so we need an initial set of FSP headers for the AMD
Sabrina SoC code to build. Since the FSP interface for this SoC won't be
too different from the Cezanne FSP interface, we'll start with a copy of
the Cezanne FSP headers and update/replace them as soon as the proper
FSP headers for Sabrina will be available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib3bf50598efe60673b81cf99da491866fb5dc121
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
This reverts commit 2a8de6dafb.
SeaBIOS 1.15.0 regresses on systems with NVMe devices [1]:
> Greetings! Was this patch set tested on bare metal hardware? I'm
> seeing "GRUB loading: Read Error" when attempting to boot from NVMe on
> various Purism Librem devices (Intel Skylake thru Cometlake hardware).
> Reverting this series resolves the issue.
So, revert back to SeaBIOS 1.14.0.
[1]: https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/message/SRECAGH4NE3XPDWJ2YI526L5LPSJWENJ/
Change-Id: If2ec738d478f11b203f499eaa28197357de6630d
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61179
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The object pointed to by the struct device * argument is not modified,
therefore it can be made const.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I300d2a59eb0513ddd08d4f1d2a3c6eb829e3f836
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The Lemur Pro, with its mixed memory topology, only has a DIMM at
address 0x52.
Change-Id: Iecea8c70c7fd40943d86f8918f8e3b384538b5c3
Fixes: 4dcee4f21d ("mb/system76/lemp10: Add System76 Lemur Pro 10")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
When calling get_pcie_rp_pmc_idx(), the following code checked the
return value to see if it was negative or `> CONFIG_MAX_ROOT_PORTS`.
However, the expected return value for CPU PCIe RPs is above
MAX_ROOT_PORTS. Since the static, local function is intended to return
-1 or a valid value, drop the check for `> CONFIG_MAX_ROOT_PORTS`.
Change-Id: I2039273ad246884cd8736a7f0355e621a706a526
Fixes: b6a15a7 ("soc/intel/common/block/pcie/rtd3: Update ACPI Update
ACPI methods for CPU PCIe RPs")
Tested-by: Tim Crawford <tcrawford@system76.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Like the variant function to change DXIO settings, add a similar weak
function to modify the DDI settings.
Currently we follow the old way. Later we will find out a better way
to avoid using weak function.
Change-Id: I9898d717bc3025ea1ddc3b0db41325083324ed57
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61140
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
To be shared with different SOCs, move the dramc_param_header struct
as well DRAMC_PARAM_FLAG and DRAMC_PARAM_CONFIG enums to a common
header file dramc_param_common.h.
TEST=fast calibration pass
BUG=b:204226005
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I087971799803e47e34c30063b2b0bd0cfc5795ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61132
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Building libgfxinit with Debian’s toolchain – latest test with *gnat-11*
11.2.0-13 from Debian sid/unstable – the build fails with the error
below.
E: Invalid reloc type: 10
E: Unable to create rmodule from 'build/cbfs/fallback/ramstage.debug'.
Debian’s toolchain is built without enabling PIE by default.
So, explicitly pass `-fno-pie` to `ADAFLAGS_common` to be independent
from how the toolchain was built.
TEST=*gnat* 11.2.0-13 successfully. builds
purism/librem_cnl/variants/librem_mini with libgfxint.
With the coreboot toolchain `make BUILD_TIMELESS=1` produces the
same `build/coreboot.rom` for `BOARD_PURISM_LIBREM_MINI_V2=y` on
top of commit 50251400d2 (sb/intel/common/firmware: Reword
me_cleaner warning) with and without the change.
Change-Id: I6661937906d95c130c6099f598d61b21e958fd85
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This change splits the size of the console transfer region and size of
the bootblock/romstage Pre-RAM console region. This allows having a
larger Pre-RAM console while not impacting the size of the PSP verstage
console.
Instead of directly using the PRE_X86_CBMEM_CONSOLE_SIZE symbol in
`setup_cbmem_console`, I chose to use the offsets provided in the
transfer buffer. It would be nice to eventually do this for all the
fields in the transfer buffer.
BUG=b:213828947
TEST=Boot guybrush and verify verstage logs are no longer truncated
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I8b8cc46600192a7db00f5c1f24c3c8304c4db31d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
When running in verstage before bootblock, the PSP (ARM co-processor) is
running with limited SRAM. It needs to stash the verstage console data
internally until DRAM is brought up. Once DRAM is brought up the data is
stashed in a "transfer buffer" region. In the current design, we are
using the same region for the transfer buffer and the
preram_cbmem_console region. This has the following downsides:
1) The pre-x86 buffer needs to be large enough to hold all the
verstage, bootblock and romstage console logs.
2) On AMD platforms, the PSP verstage is signed. Changing the size of
preram_cbmem_console after the fact will result in a mismatch of the
transfer buffer between verstage and bootblock.
This CL adds a new method that allows SoC specific code to copy the
CBMEM console in the transfer buffer to the active CBMEM console.
BUG=b:213828947
TEST=Boot guybrush and no longer see
*** Pre-CBMEM romstage console overflowed, log truncated!
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idc0ab8090db740e0d1b3d21d8968f26471f2e930
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Fixes commit 6bcaf6f (mb/system76/lemp9: Configure IRQs as level
triggered for HID over I2C), which changed the interrupt configuration
in the device tree but not in the GPIO definitions. Tested on a
System76 Lemur Pro (lemp9), multi-touch I2C-HID was working.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I7f0559675a65453a1ad071f96049549a2dc21378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
The patch implements get_soc_cpu_type() helper function which
determines whether the executing CPU is a small or a big core. This is
the SoC-specific callback that must be implemented for SoCs that select
SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID. It will be called from
set_cpu_type().
TEST=verified on Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Icd0d7e8a42c4b20d3e1d34998bca6321509df2d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Rebase all of the timestamps to the lowest (potentially negative) value
in the list when displaying them. Also drop the extra
`timestamp_print_*_entry` calls for time 0 and instead inserted a
"dummy" timestamp entry of time 0 into the table.
TEST=Boot to OS after adding negative timestamps, cbmem -t
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I7eb519c360e066d48dde205401e4ccd3b0b3d8a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Change timestamp_add to accept negative values for events that took
place before coreboot started executing.
TEST=Boot to OS, check cbmem -t
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I90afc13a8e92693d86e3358f05e0a0cb7cdbca9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This command retrieves a set of boot performance timestamps
CSME collected during the platform's last boot flow.
BUG=b:182575295
TEST=Verify CSME timestamps after S3 and boot.
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ic6f7962c49b38d458680d51ee1cd709805f73b66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This reverts commit 6a3bdf9aa5.
Reason for revert: Oops, I thought I abandoned this. It's been replaced by https://review.coreboot.org/c/coreboot/+/61099/3
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id18e8e69481bdd78fdd70116940ea435922a9e77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested by checking PCR-2 data is recorded in cbmem log.
Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
The _UID must be unique as these devices use the same _HID. Fixes BSOD
when booting Windows 10.
Change-Id: I67fda892a496dc9e5a6fa5e133ff0b35cde8fce7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times
are greater than 500ms, which is the spec for Chromebooks.
The actual kernel timing has been measured, and given the ACPI delay
after deasserting reset in addition to the delay until the kernel
driver accesses the device, delaying only 200ms in the ACPI method is
also sufficient to meet the 300ms requirement.
BUG=b:210772498
BRANCH=none
TEST=build and test touchscreen function on DUT.
TEST=suspend, wake DUT and check touchscreen function.
Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Change-Id: I4bb4eda09686cb59b6e19c741aa2b78d84332d2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch provides the possible options for PCH to allow `Pad
Configuration Lock`.
`SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI` config is for Tiger Lake
Point (TGP) and Alder Lake Point (ADP) PCH.
BUG=b:211573253, b:211950520
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7cf35893ab613b154a1073060081a09e561ffe56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This patch introduces a `const bit_mask` variable to hold the gpio
PAD mask value prior to sending the lock configuration command using
the sideband interface.
Additionally, this patch fixes the PAD lock overridden issue as below:
Without this code change every consecutive PAD lock operation resets
other bits in that register as below:
After Locking pad 2 , pcr_read=0x4
After Locking pad 3 , pcr_read=0x8
After Locking pad 4 , pcr_read=0x10
After Locking pad 5 , pcr_read=0x20
After Locking pad 6 , pcr_read=0x40
After Locking pad 7 , pcr_read=0x80
After Locking pad 8 , pcr_read=0x100
With this code change all previous lock bits are getting preserved as
below:
After Locking pad 2 , pcr_read=0x4
After Locking pad 3 , pcr_read=0xc
After Locking pad 4 , pcr_read=0x1c
After Locking pad 5 , pcr_read=0x3c
After Locking pad 6 , pcr_read=0x7c
After Locking pad 7 , pcr_read=0xfc
After Locking pad 8 , pcr_read=0x1fc
BUG=b:211573253, b:211950520
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I342a666aa2d34bcc8ba33460396d1248f0c0f89f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60999
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ADL-P 2+8+2 (28W) would have a match PD to ADL-P 4+8+2 (28W). Group them
into the same group core "ADL_P_282_482_28W_CORE".
BUG=b:211365920
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I3f92c0f5d717dd33ac478fbaa883f3e972e7a7de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Camera LED blinks as sensor is being probed during kernel boot,
which misleads user to belive camera has been turned on.
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
BUG=b:214155527
TEST=Build and boot Kano to OS. Verify entries in SSDT and monitor LED
during boot.
Signed-off-by: Jim Lai <jim.lai@intel.com>
Change-Id: I92f1e88d0fcce49660a95d4402c8c4161e320168
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61109
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:210501484
BRANCH=puff
TEST=build
Change-Id: I84bc378d6b00828366309be7dbf56a61702a14da
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
This will make the method available earlier. This is needed for the next
CL.
BUG=b:213828947
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iee911a2debcfbf4309d2e866401b74f2a6c18feb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The only option to make HECI1 function disable on Elkhart Lake SoC
platform is using SBI under SMM mode.
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I76c625e6221fdef1343599e7dbc7739caa91bf98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
David Wu