add SKU ID 3 and 4 for dood DVT
1: Dood WiFi + LTE (evt)
2: Dood WiFi (evt)
3: Dood WiFi + LTE + dual camera (dvt)
4: Dood WiFi + dual camera (dvt)
BUG=b:148988979
TEST=build firmware and verify on the DUT of sku 3 and 4
check LTE module is enabled or not
Change-Id: If86efe2a2f7b2e165ad44220b6dd59e9080b5892
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38730
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The pgeorgi namespace is my own and things could change without notice
there. To overcome this issue, encapsulate is now maintained on
review.coreboot.org/encapsulate.git and mirrored over to github, so
let's use that.
Change-Id: I12e43f61f693a6b0392b84dd56ede665a1a2129a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38899
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
USB3 OC pin is configured for the wrong pin. Follow HW circuit
(schematics) to set it correctly.
BUG=b:147869924
TEST=USB function works well and OC function is corresponds to the
right port.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I61234a2054ab52fa508482d3dd0f94b13f96a5c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38885
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Puff uses the smbus to access the SPD of memory DIMMs.
It will short the SPD reading time if enabling SPD_READ_BY_WORD.
BUG=b:149360051
BRANCH=None
TEST=build puff and boot up OS
ran cbmem -t | grep FspMemoryInit
Without this patch:
950:calling FspMemoryInit 643,199 (257,588)
With this patch:
950:calling FspMemoryInit 477,714 (154,612)
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Change-Id: I161e8eb386ab604b16746f0deeecc3d6c9063c3a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
The number of bits per pixel for MIPI_DSI_FMT_RGB666 should be 24
instead of 18.
BRANCH=none
BUG=none
TEST=none
Change-Id: I9574502b2dec4b5a042df3886922ddd8c755da1a
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jitao Shi <jitao.shi@mediatek.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Fine tune the video timing of panel-BOE_TV101WUM_N53 to avoid noise. The
parameters are based on BOE NV101WUM-N53 preliminary product spec.
BRANCH=kukui
BUG=b:147378025
TEST=bootup pass
Change-Id: Ia9e2cc90f233e87d712c2dc6f4441ca2e5423162
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38401
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The extra data transfer in DSI, namely, lpx, hs_prepare, hs_zero,
hs_exit and the sof/eof of DSI packets, will enlarge the line time,
which causes the real frame on dsi bus to be lower than the one
calculated by video timing. Therefore, hfp_byte is reduced by d_phy to
compensate the increase in time by the extra data transfer. However, if
hfp_byte is not large enough, the hsync period will be increased on DSI
data, leading to display scrolling in firmware screen.
To avoid this situation, this patch changes the DSI Tx driver to reduce
both hfp_byte and hbp_byte, with the amount proportional to hfp and hbp,
respectively. Refer to kernel's change in CL:1915442.
Also rename 'phy_timing' to 'timing' to sync with kernel upstream.
Since the phy timing initialization sequence has been corrected, the m
value adjustment in the analogix driver can be removed.
BUG=b:144824303
BRANCH=kukui
TEST=emerge-jacuzzi coreboot
TEST=Boots and sees firmware screen on krane and juniper
TEST=No scrolling issue on juniper AUO and InnoLux panels
Change-Id: I10a4d8a4fb41c309fa1917cf1cdf19dabed98227
Signed-off-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
When configuring MIPI DSI Tx, the value of pcw was calculated from data
rate in MHz, leading to loss of precision. This patch changes to use
data rate in Hz for the calculation so that the resulting value should
be consistent with the one in kernel (CL:1786327).
In addition, change the type of data rate to u32, and calculation of
data rate from pixel clock is changed to use DIV_ROUND_UP for
consistency with kernel (CL:1761843).
Also remove unused variable txdiv.
BRANCH=kukui
BUG=b:149051882
TEST=emerge-jacuzzi coreboot
TEST=No scrolling issue on Juniper AUO and InnoLux panels
Change-Id: I23220d446833b956431006027bbc8cb20fc696a5
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38827
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bipship is a sustaining project of Blooguard.
SAR value follow Blooguard.
BUG=b:149414960
BRANCH=octopus
TEST=build and verify load correct SAR value by sku-id
Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Turn on the H1 device in the devicetree. Configure the concerned GPIOs
and enable the required config items.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I37972635454cd0d35608623e7be4110012ace658
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38772
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove blank line to maintain the relation between the previous comment and
the remainder of the block.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: Ib9754c6723ecd5e4895898490fc7228e1c3839d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38821
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The is_smm_enabled is not necessary because it is done previously
in this code path.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I20d50acbea891cb56ad49edc128df25d21c5f1ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38820
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initial testing of STM support revealed a sizing issue for greater than 4 threads.
This patch reduces the STM smm_save_state_size, which should allow for 24 threads.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I025694185469577e072a92ea75cbbb53c24b2c24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38819
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add EC ACPI reporting of current temp and platform critical temp.
Adapted from ACPI dump of ODM AMI firmware.
TEST: check reporting of current/critical temps via lm-sensors
from ACPI on Librem 13v1 and 13v4 boards.
Change-Id: I92641fbbdda46e0c388607a37f7a7cc2dcd6c26d
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit a017e5fb3d.
Reason for revert: The extra reset in the FSP after the flex ratio is changed causes recovery reasons to be lost. There are some vboot changes that recently landed that could help with this issue, but for now, we are working on a new AU image for Kohaku and this is causing our automated testing to fail.
Change-Id: Ic38b390842e2a533033587b3247b7c8d982b1dff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Added CMOS support for MacBook Air 4,2. In future, I hope there will
be more useful options available, because I'm working on macbooks
support.
Also, it may be necessary for hyper_threading support (#29669) once it
will be ready.
Change-Id: I369ed9aeff2098a4840918531be6a34cfc8d2a1e
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Make sure the Skylake comment refers to the correct BWG paragraph and
update the text for all.
BUG=N/A
TEST=build
Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI
offset 0x80. This is specified in PCH BWG par 2.5.1.5.
Add the support to make sure this PCR is always set correctly.
BUG=N/A
TEST=tested on facebook monolith.
Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With CL:1940398, this option is no longer needed. Recovery
requests are not cleared until kernel verification stage is
reached. If the FSP triggers any reboots, recovery requests
will be preserved. In particular:
- Manual requests will be preserved via recovery switch state,
whose behaviour is modified in CB:38779.
- Other recovery requests will remain in nvdata across reboot.
These functions now only work after verstage has run:
int vboot_check_recovery_request(void)
int vboot_recovery_mode_enabled(void)
int vboot_developer_mode_enabled(void)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Serves two purposes:
(1) On some platforms, FSP initialization may cause a reboot.
Push clearing the recovery mode switch until after FSP code runs,
so that a manual recovery request (three-finger salute) will
function correctly under this condition.
(2) The recovery mode switch value is needed at BS_WRITE_TABLES
for adding an event to elog. (Previously this was done by
stashing the value in CBMEM_ID_EC_HOSTEVENT.)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Jasper Lake SOC has 8 PCIe root ports. Cleaning up the root ports
as per Jasper Lake. This patch updates the devicetree to enable WLAN
and NVME for jasperlake_rvp and removes the other root port configurations
which are not required.
Change-Id: I6c801d81ccece6b45a7c45212533bb33a6805367
Signed-off-by: Usha P <usha.p@intel.com>
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38679
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI files for xhci in JSL is different from TGL. Hence, renaming
xhci.asl to xhci_tgl.asl and adding a new file xhci_jsl.asl for JSL.
Also, allowing xhci.asl to choose the correct file based on the SoC
selected.
BUG=None
BRANCH=None
TEST=Compilation for JasperLake board is working
Change-Id: Ia8e88e02989ff80d7cd1f28941e005cb0d842fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
SUART3/4 are unused on this board (verified by checking registers on
vendor BMC firmware). Further they break the console for an unknown
reason. Thus disable them.
Change-Id: I30bb8184d03ee1037d9ec33eb1d93ee540563fc5
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38818
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SUART3/4 are unused on this board (verified by checking registers on
vendor BMC firmware). Thus drop the remaining settings.
Change-Id: I2ababd92fcd7016c508aa3119e798f75eeb90a1c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38817
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These header files need to make use of vb2_shared_data.
Remove the last vestiges of vboot1 data structures in coreboot.
BUG=b:124141368, chromium:1038260
TEST=Build locally with CL:2054269
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I61b27e33751c11aac9f8af261a75d83b003b5f92
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38884
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
X11SSM-F has a different board id (0896) than X11SSH-TF (089C). Use the
right id for the right board.
Change-Id: Ib0d5e66ce1a973f29a1da78f04f7ef677b260cd8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The variable is never read before being assigned a value at the end of
the function.
Change-Id: I3b42dcd564480005b2c520316933940d87b6e418
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
GNU Make 4.3 is more picky about the $(spc) definition. It seems, the
variable ends up empty. The old definition worked for nearly 8 years,
RIP.
Tested with GNU Make 4.2.1 and 4.3.
Change-Id: I7981e0066b550251ae4a98d7b50e83049fc5586a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38790
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The body contains a `#` and GNU make 4.3 disagrees with earlier versions
if it should be treated as a comment. Turn it into a `define` which has
clearer semantics regarding comments (interpretation is supposed to be
deferred until the variable is expanded).
Change-Id: I589542abbd14082c3ecc4a2456ebd809fb6911ea
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38793
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Interpretation if # starts a comment inside a variable definition varies
between GNU make versions. Use a wildcard to match the first # and use
`sed` instead of `grep | cut` to avoid unbalanced quoting chars.
Tested with GNU make 4.2.1 and 4.3. Both produce the same output as
4.2.1 did before the patch.
Change-Id: Ib7c4d7323e112968d3f14ea0590b7dabc57c9c45
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
* Add additional information on non-debian cli tools
* Improve spellings and descriptions to the best of my knowledge
Adding info about needed tools in other distribution's package
managers was requested at the coreboot beginner's workshop at 36C3.
Change-Id: Ifff3c8354b4bec9f195f075eb6b2f377195fc237
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Calculate the correct MMCONF size, which was only correct for
256MiB, but not for smaller values.
Tested on HP Z220:
Fixes "Not using MMCONF" warning in dmesg.
Change-Id: I986681126637c28f6442ab7c34acea5bb58ea3d2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net>
* Use new ACPI syntax
* Return either 0 or 0xf for PCI root port. That will make the
device show up in Windows. This might help users and possibly
Windows drivers working with PCIe ports.
Change-Id: I1e76b735ab1472f6a4ea493c733cd6b2e6fca29e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
By updating the FSP submodule we now got all FSP headers from within
that repo. This commit changes the default paths to use these and
fixes some include paths to allow the usage of
vendorcode/intel/edk2/UDK2017 together with the official Intel
distribution.
We are also adding back the CHANNEL_PRESENT enum, that is
missing in the official headers.
This was tested on the Razer Blade Stealth (late 2019).
Change-Id: I7d5520dcd30f4a68af325125052e16e867e91ec9
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37579
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some of the common memory code that was being performed in
mainboard has moved into the soc to reduce redundant code.
This change adapts volteer to use Tiger Lake's new common code.
BUG=b:145642089, b:145238504, b:145564831
BRANCH=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, boot to kernel, "cat /proc/meminfo" and verify it reports
"MemTotal: 8038196 kB".
Change-Id: I32c9b8a040728d44565806eece6cf60b6b6073b6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Picasso no longer intends to implement a hybrid romstage,
opting instead for a more traditional bootblock/romstage/ramstage.
Update the documentation to reflect this. Clarify additional
details that have come to light since the last revision.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I6c98c007ddb8a4a05810f19e4215bde719de7bb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
When acpi_write_dbg2_pci_uart is called and no pci uart is available the
function prints "Device not found" as an error. This is not correct.
Change the error level to BIOS_DEBUG so coreboot reports the device is
not available but doesn't flag this as an error.
BUG=N/A
TEST=build
Change-Id: I14567bcfcf5a6ff427e418d15bc2675ae7a28f53
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Kenneth Chan