Add a Kconfig variable so that driver code knows whether
or not to use dual-output reads.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I31d23bfedd91521d719378ec573e33b381ebd2c5
Reviewed-on: https://chromium-review.googlesource.com/177834
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit de6869a3350041c6823427787971efc9fcf469b8)
tegra124: implement x2 mode for SPI transfers on CBFS media
This implements x2 mode when reading CBFS media over SPI.
In theory this effectively doubles our throughput, though the initial
results were almost negligibly better. Using a logic analyzer we see
a pattern of 12 clocks, ~70ns delay, 4 clocks, ~310ns delay. So if we
want to see further gains here then we'll probably need to tune AHB
arbitration and utilization to eliminate bubbles/stalls when copying
from APB DMA.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I33d6ae30923fc42b4dc7103d029085985472cf3e
Reviewed-on: https://chromium-review.googlesource.com/177835
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 29289223362b12e84da5cbb130f285c6b9d314cc)
nyan: turn on dual-output reads for SPI flash
Nyan's SPI chip is capable of dual-output reads, so let's use it.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I51a97c05aa25442d8ddcc4e3e35a2507d91a64df
Reviewed-on: https://chromium-review.googlesource.com/177836
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 62de0889a9cfc5686800645d05e21e272e4beb5c)
Squashed three commits to enable dual output spi reads for nyan.
Also fixed the spi_xfer interface that has been updated to use bytes
instead of bits.
Change-Id: I750a177576175b297f61e1b10eac6db15e75aa6e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6909
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch adds stub implementations of exception_init() to all archs
so that it can be called from src/lib/hardwaremain.c. It also moves/adds
all other invocations of exception_init() (which needs to be rerun in
every stage) close to console_init(), in the hopes that it will be less
likely overlooked when creating future boards. Also added (an
ineffective) one to the armv4 bootblock implementations for consistency
and in case we want to implement it later.
Change-Id: Iecad10172d25f6c1fc54b0fec8165d7ef60e3414
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176764
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2960623f4a59d841a13793ee906db8d1b1c16c5d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6884
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
The google mainboards were updated to unconditionally include
chromeos.c except for panther.
Change-Id: I35bbd56326ee0f94ee542bae28f9c23980e9a9ed
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6874
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This fixes the ACPI interrupt storm on Parrot that happens when
closing the lid or entering suspend by lid close (seen in
/sys/firmware/acpi/interrupts/gpe1F). This patch inverts the interrupt
trigger level every time the interrupt is received so that it doesn't fire
until the next state change. http://askubuntu.com/questions/310196
is a good example of what this is trying to solve.
Change-Id: I8b095914e9330c3217a4ceb058613fa952f4a234
Signed-off-by: Andrew Litt <ajlitt@splunge.net>
Reviewed-on: http://review.coreboot.org/6858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Move NFC_INT to GPIO9
Swap CODEC_INT to GPIO46 and WLAN_DISABLE_L to GPIO42
Swap ACCEL_INT to GPIO45 and PP1800_CODEC_EN to GPIO43
Enable PP1800_CODEC_EN, CODEC_LDOENA, CODEC_RESET_L
Old-Change-Id: I5547d34f1b7953808375aa5fe5e0a9640ae7e05e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5bb4bc59e37ee4fe9a0556e08a53402c822e5bd6)
samus: Misc fixes from proto1b bringup
- NFC interrupt is expected in the kernel as a GPIO now,
so set it back to that type
- NFC FW update GPIO should be low
- Accel/Codec interrupts were still set as GPIO type,
they should be set as PIRQ type
Old-Change-Id: I354c848ae7b158943f4745872b82a49e17e67e2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 75a0944f320c80618f12732a23344ce40010a688)
Squashed two small patches for samus.
Change-Id: I7ec56191fe2b7f19e470df175ad0bbe320a442f5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6852
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Old-Change-Id: Icdde4cf5e1abb3ae1ad14279ebc129919ba30074
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170837
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e9d87534ccacb42d508f1902786470798a2dbaea)
nyan: Add a "special-class" for aggregating BCT files into bct.cfg.
The config file which cbootimage processes to create a BCT could come from
multiple different files, individually selected based on config options,
and/or split up into different files for organizational purposes. This change
adds a special-class which collects those files and concatenates them all
together in a bct.cfg which can be processed more easily by other parts of the
build.
While the BCT files themselves are potentially very board specific, for
instance ones that hold memory timing information, this bit of code which
collects them is not. It has to be in each board file instead of alongside the
CPU, however, to ensure that the special class is set up before another
Makefile tries to use it. If we end up with lots of Tegra based boards which
duplicate this code over and over, we might want to revisit how this works.
Old-Change-Id: I58e1373434f89e69298990ea4643a19d8afdc309
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170922
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3ae44178b7084037a75e16ce161b1432abf4246a)
nyan: Add bct files for nyan.
There's a config option which selects between the emmc and spi config files
depending on what the firmware is intended to boot from. These are copied from
the files installed by the tegra-bct-nyan ebuild, except that the spi config
file has been modified so that there's only one copy of the BCT and so that it
only has one configuration. This is to save space in the final image.
Old-Change-Id: Ibf1b895bb3ed060d394fc6ffcec67b6972bb21e3
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170923
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 6bbcffe04e8ae73c86bc05c577a67f909857e1c0)
Squashed three commits required to get nyan building since some patches
were out of order. Added a select to the nyan mainboard Kconfig to have
a rom size of 1024K to match the saved config on the chromium side.
Change-Id: I346dbb02d216adfea9707e40adf0a4d1e0fabf36
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6669
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
As a first step towards removing hardcodes from the FUI support,
change the haswell call to i915_lightup to panel_lightup, and pass the
intel_dp * as a parameter. Get rid of the scalar arguments and make
them part of intel_dp. Get rid of file-scope variables and use the
ones in the intel_dp struct. In falco, use functions that peppy
uses. Drop slippy support for FUI, it's a dead board; if this is ok
I'll remove the files next.
And, incidentally, fix the broken RGBX constant and change it to BGRX.
Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/174932
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6833
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
It's time to start cleaning up the falco graphics code, but it needs
to have its own files, not slippy's.
Change-Id: I7dbe27eafbf247b5c7806819bf0059d8b10e842c
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172501
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 262a0c16a39871d14972a92bff2dbc24de2ca3f0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- GPIO29 is no longer connected so we don't need the SMI workaround
on the entry to sleep states.
- Disable touchscreen wake source until the kernel driver is working
so it does not wake immediately.
- Update a few GPIOs and disable the codec for now as it is leaking
into the 1.8V DDR rail.
Change-Id: Ia67b17eb4a097627befd8f39aadc939da1bf3d40
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174122
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0fdc9a83a434378499f825d072ce0adba5ffda59)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The LPDDR3 memory is x32 and dual rank with 14 row bits.
In addition the memory is actually elpida, even though
they are owned by micron it is confusing to label it as such.
And the ram strap options were inverted from what I expected
so the memory table needs to be updated.
Change-Id: Ia29a23e8140d884fb84f940806f041b40562aab9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0d63d36b8035165f95db798ed40488519e622a65)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6828
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Checked by comparing binaries and seeing no differences other than
build info.
Change-Id: Ie702c540a18b50d6da0379f7c4e65adf3e4f18d4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6819
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Not referenced anywhere.
Change-Id: I6529f2ecbc34a2fa9ca720fea1224670eb98bdcd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
There is some magic new SPD SDRAM type 241 to indicate LPDDR.
I cannot find it specificed in any JEDEC document but it is
what the reference code uses.
Change-Id: I21d7a943784435cb336ecdba7ca5eac0bf5fcd92
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171900
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0a1385515c62fd1e534b12568df8aaf2170e06f4)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6777
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
This interrupt needs to be specified in the MADT before it can
be used by the kernel driver.
Change-Id: Ic920a792a203cb06cd4529815680584a21532106
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171902
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a330fddb62cb6346ad66ceb5b5c32b66aecd81e2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6778
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Add the coreboot board files for samus
- Based on Bolt
- GPIO setup based on 0.91 schematic
- Support both memory types
- No HDA verb table for this platform
- Some GPIO interrupts are shared and need to be passed to OS
Change-Id: I8dbd7639456c631a0115b03a493d94b5e2361ab5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171694
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 249a74c628264e3d4ce754803ede31238404b4d5)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6775
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Move (and rename to make it clearer) the function that computes display
parameters from the dpcd and edid.
Change-Id: Idfbb56fd312b23c742c52abca1a34ae117a8fece
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171366
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 8f2b3bafee7cb05db8fae1c52fc9e1ee64e5e35d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6768
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
The Exynos family and most ARM products are SoC, not just CPU.
We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.
Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
The code to set the graphics translation table has been in the
mainboards, but should be in the northbridge support code.
Move the function, give it a better name, and enable support for > 4
GiB while we're at it, in the remote possibility that we get some 8
GiB haswell boards.
Change-Id: I72b4a0a88e53435e00d9b5e945479a51bd205130
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171160
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit d5a429498147c479eb51477927e146de809effce)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6741
Tested-by: build bot (Jenkins)
Peppy had some issues with FUI. We decided it was time to create
peppy-specific gma.c and i915io.c files. Using yabel and the i915tool,
we generated a replay attack, then interpolated against the slippy
i915io.c to get something working.
Also, in preparation for moving code out of the mainboard gma.c to
generic driver code, we got rid of some hardcodes in the mainboard
gma.c that have no business being there. The worst were the
computation of gmch_[m,n] and it turns out that we had some
long-standing bugs related to confusion about 'bpp'. I've killed the
word bpp everywhere I could because there are at least 3 things that
correspond to bpp. We now have framebuffer, pipe, and panel bpp. The
names are long because I want to avoid all the mistakes we've all been
making in the last year :-) Sadly, that means a lot of changes not just
peppy-related, but they are simple and in a good cause.
The test pattern generation is driven by a global variable in
mainboard/peppy/gma.c. I've found in the past that it's very useful
to have a function like this available, as one can activate it while
using a jtag debugger: halt at the right place in ramstage, set the
variable to 1, continue. It's not enough code to worry about always
including.
The last hard-codes for M and N registers are gone, and the function
to set from generic intel_dp.c code works. To avoid screen trash on a
dev mode boot, which we liked but nobody else did :-), we now take the
time to put a pleasing background color that sort of doubles as a
power LED.
Rough timing is ramstage start is at 2.2, and dev setup is done at
3.3. These new platforms are depressingly slow to boot. Rom init alone
is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash
prompt. These CPUs are at least 10x faster and take much longer to get going.
Future work, once we get this through, is to move more functions to the
intel driver, and combine the mainboard i915io.c into the mainboard gma.c.
That separation only existed because i915io.c was generated by a tool, and it
had lots of ugliness. Most ugliness is gone.
Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/170013
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
(cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d)
snow: Fix a typo in devicetree.cb that was breaking the snow build.
A typo in a recent change broke the snow build.
Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171014
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 154876c126a6690930141df178485658533096d2)
Squashed a fix into the initial patch and updated nehalem/gma.c
to have a non-static gtt_poll.
Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6657
Tested-by: build bot (Jenkins)
Trustzone needs to be initialized/disabled both on boot and on wake, so it
needs to be done before ramstage which doesn't run on wake. cpu.c isn't
compiled into romstage and fixing that causes other problems, so the trustzone
functions were split out.
Change-Id: I8fc630237ebec1f02a91600f8baf3d4e9ea66d0e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/169817
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 055ed0e28476123b0bd666109af90baf40aadcee)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This patch adds support for the DesignWare3 USB 3.0 DRD controller and
PHY to the Exynos5250 and Exynos5420 CPUs. It also adds code to the
Google Snow and Pit boards to turn these controllers on where
applicable.
Change-Id: Idcca627363a69f1d65402e1acb9a62b439f077ff
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169452
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit e9809ae12ef8b8bd6cd61d3f604cb9e4718cf7eb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6642
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Use tab between "COREBOOT", and comment.
This fix was requested in 90957f88 -
"mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000"
Change-Id: If9fb6158cca95341ab57db1125e85648b616b72c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/6601
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This header has nothing to do with cache-as-ram. Therefore, 'car'
is the wrong term to use. It is about providing a prototype for
*romstage*.
Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6661
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
A recent change to support early firmware selection on ARM broke snow and was
incompletely implemented on pit. This change fixes snow by applying
the remaining part of the change that had been applied to pit,
and also hooks up real values in the get_write_protect_state function.
Change-Id: Ifef7ad1bf399f79353daec3dd46973f2b2022e37
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/169120
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 841773e048cd9cfbb64782059c24e29c467f17c8)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6635
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
When passing '-ffreestanding' the 'main' romstage.c may no longer
necessarily be considered the entry point.
From the C specification in 5.1.2.1 Freestanding environment;
"In a freestanding environment (in which C program execution may take
place without any benefit of an operating system), the name and type of
the function called at program startup are implementation-defined."
Clang complains about these being missing as Clang is somewhat more
strict about the spec than GNU/GCC is. An advantage here is that a
different entry-point type-signature shall now be warned about at
compile time.
Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5872
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
All this samsung_get_base_address_of_device_with_a_really_long_name()
boilerplate makes my eyes bleed... I think there are so much cleaner
ways to do this. Unfortunately changing this ends up touching nearly
every Exynos5 file, but I hope you agree that it's worth it (and the
sooner we get it over with, the better... I can't bring myself to make
another device fit into that ugly scheme).
This also removes the redundant EXYNOS5 base address definitions from
the 5420 directory when there are EXYNOS5420 ones, to avoid complete
confusion. The new scheme tries to use EXYNOS5 for base addresses and
exynos5 for types that are common between the two processors, and
EXYNOS5420/exynos5420 for things that have changes (although I probably
didn't catch all differences).
Change-Id: I87e58434490ed55a9bbe743af1f9bf2520dec13f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167579
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 66c87693352c248eec029c1ce83fb295059e6b5b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6632
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
For now using the same gma.c and i915io.c files as for slippy
Change-Id: Ieb09d0152d525aa090eeb86ebfa253d450d22820
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/64373
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 3e119c7e22cb82677754413e56a125f4a372ad54)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6603
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
A large portion of documented registers have been initialized using macros. Only a few
undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant
calls. However, some more work is required to correctly identify which calls are not required.
All the io_writes are replaced by gtt_writes.
Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66204
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6600
Tested-by: build bot (Jenkins)
This patch renames the x86 way of doing things to
explicitly mention CMOS (which is not available on
our ARM platforms) and adds an implementation to
get VBNV through the Chrome EC. We might want to
refine this further in the future to allow VBNV
in the EC even on x86 platforms. Will be fixed when
that appears. Also, not all ARM platforms running
ChromeOS might use the Google EC in the future, in
which case this code will need additional work.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: Ice09d0e277dbb131f9ad763e762e8877007db901
Reviewed-on: https://chromium-review.googlesource.com/167540
Reviewed-by: David Hendrix <dhendrix@chromium.org>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 8df6cdbcacb082af88c069ef8b542b44ff21d97a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6616
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
This patch adds a mechanism to set aside a region of cache-coherent
(i.e. usually uncached) virtual memory, which can be used to communicate
with DMA devices without automatic cache snooping (common on ARM)
without the need of explicit flush/invalidation instructions in the
driver code.
This works by setting aside said region in the (board-specific) page
table setup, as exemplary done in this patch for the Snow and Pit
boards. It uses a new mechanism for adding board-specific Coreboot table
entries to describe this region in an entry with the LB_DMA tag.
Libpayload's memory allocator is enhanced to be able to operate on
distinct types/regions of memory. It provides dma_malloc() and
dma_memalign() functions for use in drivers, which by default just
operate on the same heap as their traditional counterparts. However, if
the Coreboot table parsing code finds a CB_DMA section, further requests
through the dma_xxx() functions will return memory from the region
described therein instead.
Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167155
(cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6622
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This cleans up a few minor things (mostly #defines) of the memory code
for exynos5420, pit, and kirby. Specifically:
- CONCONTROL.empty is read-only, so don't try to set it and also
get rid of the unneeded DMC_CONCONTROL_EMPTY_ENABLE #define.
- MEMBASECONFIG* overlaps members of the mem_timings struct and
are mainboard-dependent anyway, so get rid of 'em.
- DMC_MEMCONTROL_TP_DISABLE corresponds to a reserved bit. It may
have been deprecated.
- Same with TIMING* #defines.
- Clarify DDR_MODE_* usage and use mem->mem_type when appropriate.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ideb21efcc97b24f7e115e90051c20daef4480f17
Reviewed-on: https://chromium-review.googlesource.com/167500
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 650dba32cb217414c422907398f68e784e5720e8)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6614
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
membaseconfig0/1 are utterly dependent on the mainboard's particular
DRAM setup. This defines their values in the mem_timings struct for
pit.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: Ifd782d1229b2418f8ddbf0bcb3f45cc828ac34b0
Reviewed-on: https://chromium-review.googlesource.com/167488
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 80eebd5bc0dbb9fabf81f46c25dcd5c5d5747579)
exynos5420: necessary updates for DRAM
This updates DRAM usage for Exynos5420 so that we can actually
use 3.5GB:
- Memory chips used with Exynos5420 may have 16 row address lines.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Old-Change-Id: I86d1a96d0d1a028587f7655f8de5a2e52165e9d2
Reviewed-on: https://chromium-review.googlesource.com/167489
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 04bbaf5d8e125166dd689f656d5b37776be01fb1)
Squashed two related commits.
Change-Id: I4e45bc8a446715897ec21b0160701152fa6b226b
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6613
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This changes the number of chip selects that we configure from 2 to 1.
On current setups with (x16 memory 4Gbit chips) that means that we're
at 2GByte.
Technically we should add a second setting in the ares_ddr3_timings
and select between the two of the based on board strappings. That
would make the CONFIG_RUN_TIME_BANK_NUMBER work properly. I've
changed the ddr3_mem_ctrl_init() so it should handle that, but I'm not
actually doing the board strapping read right now.
This change means that accesses to 0xA0000000 - 0xFFFFFFFF on 2G
systems will no longer put the system in a messed up state (leading to
a hang). It also prevents some of the weird boot behavior that we've
seen that comes and goes depending on U-Boot alignment. See
<http://crosbug.com/p/20577>.
This patch was ported from: https://gerrit.chromium.org/gerrit/66117
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: Ib4cfe420aac30bd817438f06d01e8671afc4a27d
Reviewed-on: https://chromium-review.googlesource.com/167210
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: ron minnich <rminnich@chromium.org>
(cherry picked from commit 0ea574243058068702e3f6bc7355098745d16880)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6612
Tested-by: build bot (Jenkins)
Fine tuning DDR timings value for better stability
* Changed Data Driver Strength from 34 ohms to 30 ohms, expected to
enhance signal integrity.
* Changed DQ signal from 0xf to 0x1f000f, to keep default value safe.
* Changed mrs[2] and added new mrs direct command for setting WL/RL
without resetting DLL.
* Added explicit reset value write in phy_con0 instead of just setting
a bit, to ensure that reset happens.
* Added DREX automatic control for ctrl_pd in none read memory state.
This is ported from: https://gerrit.chromium.org/gerrit/61405
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Change-Id: I59e96e6dede7b49c6572548aca664d82ad110bb1
Reviewed-on: https://chromium-review.googlesource.com/66995
Reviewed-by: ron minnich <rminnich@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit ec34b711c6d270672c56d45c370ca14c0aa27ca3)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6611
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
