Read back the stack guards after most of the romstage took place.
Change-Id: Ia7dc26c7ed1750d4ebbe7514ed87da57f9e34a89
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
With the only valid GTT setting being 1M, TSEG_BASE can only be
aligned to TSEG_SIZE if it is also 1M. This alignment requirement
comes from the desire to use SMRR to protect the SMM RAM.
Tested on Foxconn D41S.
Change-Id: Ibd879529923a1676f2e78500797a52d8a37b8eef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This happens when TSEG is found to be unaligned.
Change-Id: Id0c078a880dddb55857af2bca233cf4dee91250a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30709
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On CPU's with a non eviction mode we cache the whole ROM to speed up
finding the microcode updates, remove the caching to fill in the non
eviction mode and then turn on caching the whole ROM again to speed
executing XIP code in flash.
Change-Id: Ib7f36678913e0ba8ef1305bca2c482f375b23eaf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30682
Reviewed-on: https://review.coreboot.org/c/30813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This patch revises the pad reset config of speaker reset GPIO pin from
RSMRST to PLTRST. Audio engineer suggested to reset the amps with
warm reset.
BUG=b:122441567
BRANCH=None
TEST=warm & cold reset & suspend_stress_test -c 10 and ensure the
speakers are working well.
Change-Id: I87c554b186b068da93e1662a97afaf01dddae0ef
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/30866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Update mainboard UART Kconfig for Whiskylake RVP.
TEST=Build and test on Whiskylake RVP.
By default we can still get console from cbmem, and
enable CONSOLE_SERIAL can get logs from UART port2.
Select other Coffeelake RVPs and check CONSOLE_SERIAL is enabled.
Change-Id: Ic56c019a12b467e5bede5648098d3fb82b56ba7e
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-on: https://review.coreboot.org/c/30861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
The mainboard_romstage_entry function is mostly boilerplate, so move
it to a common location and provide mainboard specific callbacks.
Change-Id: I33cf1d6a60d272f490f41205ec725dee8b00242b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
PLT_RST_L was asserted twice at boot-up and a glitch was observed
when coming out of suspend mode. Configure PLT_RST_L pad IOSSTATE
from HIZCRx1 to be masked.
BRANCH=octopus
BUG=b:117302959
TEST=Verified no glitch on PLT_RST_L at S3 and PLT_RST_L stays high
3.3v during S0ix.
Change-Id: I8c23aadda72be54fb45e67aab2bc8ed51e473bae
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30815
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When rmodule is loaded CPU stack alignment is only guaranteed
to 4kiB. Implementation of cpu_info() requires that each
CPU sees its stack aligned to CONFIG_STACK_SIZE.
Add one spare CPU for the stack reserve, such that alignment can
be enforced runtime.
Change-Id: Ie04956c64df0dc7bb156002d3d4f2629f92b340e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/26302
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some usb devices exhibits signal loss which causes xHCI entering
compliance mode. The resolution is to disable xHCI compliance mode.
BRANCH=octopus
BUG=b:115699781
TEST=Verified usb operation successfully.
Change-Id: I41fecaa43f4b1588a0e4bbfc465d595feb54dd24
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30817
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Provide options to disable xHCI Link Compliance Mode. Default is FALSE
to not disable Compliance Mode. Set TRUE to disable Compliance Mode.
BRANCH=octopus
BUG=b:115699781
TEST=Verified booting to kernel.
Change-Id: I2a486bc4c1a8578cfd7ac3d17103e889eaa25fe4
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/30816
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Apparently coreboot still uses magic numbers instead of macros in some
Lenovo mainboards. Let's use macros instead.
Note that IOTR[0123] is a 64-bit width variable.
Change-Id: Icf185c77ede5a258fe37be9e772be6804d014b57
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit follows up on commit 2e464cf3 with Change-Id
I61fb3b01ff15ba2da2ee938addfa630c282c9870.
Change-Id: Iaf06d347e2da5680816b17f49523ac1a687798ba
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: David Guckian
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Move early_mainboard_romstage_entry before console_init.
Allows to setup a SuperIO, if any, for serial console.
Change-Id: I370263a6197a4c0c805352f07fedddbee1b8e247
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Note that IMC must sleep while SPI writes are in progress.
Instead of using these ACPI methods, flashrom currently does
raw IO to achieve the same.
Change-Id: Ifca4e8328c54d1074b4799ddecfece24607214db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/18537
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
IMC is used on some of the AMD reference designs, so do not
touch them yet.
Change-Id: I6a58ab53d4a800d4c0c2026e50826122ece2c59f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/21190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
IMC is used on some of the AMD reference designs, so do not
touch them yet.
Change-Id: Iae21e0294f0155f07fb4f4348ebc5b3120d50fd1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/18536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Only a few boards are using IMC for the onboard fan control,
so regarding the availability of IMC selection it should be opt-in,
not opt-out. Also, select HUDSON_IMC_ENABLE for Gizmo 2
because Gizmo 2 could use IMC for the onboard fan control.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I3590b13c3b155405d61e373daf1bd82ca8e3bd16
Reviewed-on: https://review.coreboot.org/c/30756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Add S25FL208K (ID 0x4014), S25FL132K (ID 0x4016) and S25FL164K (ID 0x4017)
chips in a way similar to S25FL116K (ID 0x4015) chip from the same family.
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Change-Id: I9bf7197bbc0d12797c8ed100c673628de9c140f7
Reviewed-on: https://review.coreboot.org/c/30874
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
butterfly is a Sandybridge device, and selecting Ivybridge
breaks libgfxinit currently due to CPU mismatch
Test: build/boot butterfly w/libgfxinit
Change-Id: I1a7f5a3681d21a256834b11b545855c4365f5f78
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30820
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's supposed to be the same device that is passed to the executing
function.
Change-Id: I6cf994390c16e0393c96a2b2e04a36305be88e68
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
In these cases we have to expect a NULL pointer because the IGD
device 0:2.0 may be disabled.
The behaviour still differs from using dev_find_slot(), which may
return a disabled device. Though, if you'd try to read its config
space you'd only read garbage (0xff) and in cases where we filled
ACPI data with devicetree information, the information shouldn't
be interpreted by the OS because of the disabled device.
Change-Id: I1bab8fa3a82daca71d03453315cdd69d8951fc24
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30879
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Superseeded with DEBUG_CONSOLE_INIT.
For dbgp_print_data() return early and skip reading
registers when dprintk() would not get printed anyways.
Change-Id: Idf470b8572ad992c8d4684a860412d9140f514ca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Under normal circumstances no printk() goes through until
console_hw_init() has completed. This is wanted behaviour,
except when you need to debug the setup of one of consoles.
Change-Id: Ifc2bb22bf930009ee229d4461f512ada3018307b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This board is the only user of these ancient chipsets,
so we'll do all in one go.
Also wipe out some extra headers.
Change-Id: I22c172d577e6072562d8fcfa58145ec62473823e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This was used to check romcc-built bootblock and romstage
agree about the location of 16-bit entrypoint. There was
no need to customize it as bootblock size requirement did
not grow. Just check for a fixed location at 4 GiB - 4 KiB.
With C_ENVIRONMENT_BOOTBLOCK we can have a proper symbol
for the purpose, since it appears in the same compilation
unit. It will adjust if C_ENV_BOOTBLOCK_SIZE changes.
Change-Id: I93f3c37e78ba587455c804de8c57e7e06832a81f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This patch adds a workaround for ThP2. The PCIe root port LCTL2.TLS
is by default GEN1 and ThP has bad synchronization on polarity
inversion. When the root port request for speed change, ThP doesn’t
confirm the request, and both sides are moving to polling after
timeout, hot reset is issued, and then most of the CFG space is
initialized. From the observation, CCC/ECPM/LTR would be reset to
default but CCC/ECPM of root port and end devices have been
reconfigured in pci_scan. The LTR configuration for root port
is still missing.
BUG=B:117618636
BRANCH=None
TEST=Warm/cold reset for 10 times and didn't see unsupported request
related AER error messages & $lspci -vvs 00:1c.0|grep LTR and
ensure LTR+ is presenti & $iotools pci_read32 0 0x1c 0 0x68
and ensure bit10 is set.
Change-Id: Id5d2814488fbc9db927edb2ead972b73ebc336ce
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/30486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
After f5ca922 (Untangle CBFS microcode updates) got merged, all
mainboard using intel apollolake, cannonlake, coffeelake, glk,
kabylake, skylake, icelake and whiskeylake get affected.
Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG
and set default console for each platform.
BUG=N/A
TEST=Build and test on Sarien platform, by default we can still get
console from cbmem, and enable CONSOLE_SERIAL can get logs from UART
port 2.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de
Reviewed-on: https://review.coreboot.org/c/30853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
With the commit a96e66a (soc/intel: Clean mess around UART_DEBUG), an
adjustment is necessary for this mainboard.
Change-Id: I0fb6288959f8bcb45c4cc93cc132f31a5ab2a5ad
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This way date and version are automatically updated when util/crossgcc
was changed, the version contains the commit ID and we have less churn
on these variables.
Change-Id: I475ba9578a8bb421d7c342d2569d7de7fcf4161d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This reverts commit 6fffd70435.
Doing more tests on the Asus KGPE-D16, it seems to cause a reboot loop
quite often. Therefore, revert the commit.
The problem might be caused by the spinlocks used by `get_option()`, and
which are not used by `read_option()`.
Change-Id: Ic25129aa71c8e8e40a65bb2658de78005766fea8
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/30830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The Kconfig declaration for FIXED_UART_FOR_CONSOLE was accidentally
placed inside an `if CONSOLE_SERIAL` in a96e66a (soc/intel: Clean mess
around UART_DEBUG).
TEST=Start a clean config, select intel/leafhill and disable serial
console. Confirm that config can be saved without error.
Change-Id: Ie41687e91af11a13697cbe25938dada2c74b40fb
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Clearing the EBDA was introduced with b4aaaa "Prepare the BIOS data
areas before device init." which states that the purpose of setting up
these area's is just to make sure they are sane. On the S3 path doing
this is not needed and can even thrash data set up by payloads (mostly
SeaBIOS) that used that memory.
Change-Id: I9c54156bd8247e8a34dec6edc27cfc2d33cde595
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Arthur Heymans