Fully tested for Probe/Read/Erase/Write on EN29F002NT.
Jedec subroutines 'probe_jedec()' and 'erase_chip_jedec()'
are still in use, but a tailored 'write_en29f002a()' is
needed due to a byte wise writing mechanism for this chip.
Signed-off-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3602 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
without errors.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3601 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
EP80579 Integrated Processor (codename "Tolapai"). The memory
controller code supports only 64-bit-wide DIMMs with x8 devices and
ECC. It has been tested on a development board using a single Micron
MT9HTF6472PY-667D2 DIMM. Your mileage will definitely vary with other
DIMMs.
Signed-off-by: Ed Swierk <eswierk@arastra.com>
Acked-by: Joseph Smith <joe@settoplinux.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3600 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
immediately overwritten by stdscr.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3599 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
to an extra space sent at end of each line, as well as a data corruption
issue, which could result in undefined color pairs being referenced.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3598 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3596 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3595 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
default 48MHz clock input. The Asus a8n_e uses the it8712f
with a 24MHz clock input. The it8712f early init code was
setting a 24MHz input clock(to support the a8n_e).
Since 48Mhz is the default I added a function to set 24MHz
input clock to the a8n_e.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Rudolf Marek <r.marek@assembler.cz>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3594 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
VT8237R (random keyboard/mouse lockups).
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3593 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Preset CC to gcc in Makefile. There are some $(shell $(CC) ...)
invocations with GCC specific options, so that shouldn't hurt.
2.
Replace stdbool.h include in util/kconfig/expr.h by a custom
implementation of booleans. This is okay as these booleans are purely
internal. It's necessary because there's some disagreement between the
Solaris headers and GCC on Solaris, about when stdbool.h is appropriate.
3.
Remove stdbool.h include from util/kconfig/zconf.tab.c_shipped. This
file includes expr.h already, so it picks up the right set of
primitives, without duplicating the special case for Solaris.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3592 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
problem left is with CPU scaling setup. No VGA - may work with the Xorg drivers
recently released, maybe with OpenChrome too.
It wont work with the little patch which will hop in soon
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Michael Xie <Michael.Xie@amd.com>
Reviewed-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3590 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Most of the functions in SB600 are enabled except power management.
Signed-off-by: Michael Xie <Michael.Xie@amd.com>
Reviewed-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3589 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
All the PCIe slots are enabled in this patch except power management.
Signed-off-by: Michael Xie <Michael.Xie@amd.com>
Reviewed-by: Marc Jones <marc.jones@amd.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3588 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
D1F0 bridge without activated I/O and MEM resources, otherwise it will hang
whole PCI bus.
U-boot is also disabling the IO/MEM decode when sizing the BARs, dont know why
does we not.
Second small change just changes a bit which controls the PSTATECTL logic.
Third change deals with the integrated VGA, which needs to be enabled early,
so the VGA_EN is set along the bridges, and PCI K8 resource maps are set
correctly. Finally the CPU accessible framebuffer is now disabled as it is not
needed.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3587 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Marc Jones <marc.jones@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3586 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Michael Xie Michael.Xie@amd.com
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3585 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
(add back function keys; trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3581 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- fix ctrl-[a-z]
- get rid of curses' ps/2 driver. uses generic one instead
- #ifdef's around ps/2 keyboard handling and serial handling
- add alt-key handling (necessary for german keymap)
- flush keyboard controller buffer on init
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3580 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
significantly speeds up serial output with large windows.
It also adds the function curs_set to enable/disable the cursor (video console
only for now)
Also, use werase in one place to reduce code duplication.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3579 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* Fix an off by one bug
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3578 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
* change the comment for device f.0 from "IDE" to "SATA"
* turn on firewire device a.0
* turn on pata device f.1
* don't turn on the unusable device 10.5 (built-in vt8237 ethernet?)
Signed-off-by: Alex Mauer <hawke@hawkesnest.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3577 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
are several "if (cursorx < 0)" tests.
I also added another one, to make backspace
wrap backwards into the previous line, if necessary.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This target is a copy of the epia-cn target, with only
COREBOOT_EXTRA_VERSION modified.
Signed-off-by: Alex Mauer <hawke@hawkesnest.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3573 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Use dev_path() to have nice debug output
patch is run-time tested
Trivial, thus:
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3572 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
changes the superio to a Fintek F71805F as described at
http://www.coreboot.org/Jetway_J7F2_Build_Tutorial
It also creates the mainboard tree for this series of motherboards
(Jetway J7F2 and J7F4). I've tested it with one motherboard
(J7F2WE1G3), and I believe it works with the others, as the differences
among them are mostly trivial (processor speed, chipset and quantity of
LAN cards, audio chipset, etc.). A list of the relevant motherboards
with specs can be found at
http://www.jetway.com.tw/jw/ipcboard_socket.asp?platid=16
The irq_tables.c is copied directly from the epia-cn, because the one
generated by getpir with the factory BIOS did not work properly while
the EPIA-CN one did.
Minor changes on checkin to cope with moved romcc in latest revision.
NOTE: This board is broken until the issue introduced in r3567 is resolved.
Signed-off-by: Alex Mauer <hawke@hawkesnest.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3571 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Per report from Kevin O'Connor. Thanks Kevin!
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3570 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
on mine desktop) except of reverting the small change introduced by Bari
(gpio/inta setup reg 0x5b). This should go for some board specific file. The
change would broke at least mine board. But seems to be needed for jakllsch.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Bari Ari <bari@onelabs.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3567 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
since it has been superseeded by the ACS code in tinycurses.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3565 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
targets/*/*/Makefile
targets/*/*/normal/Makefile
targets/*/*/fallback/Makefile
to use a common copy of romcc, and to leave this compiler untouched by
'make clean' in targets/*/*/fallback/ and targets/*/*/normal/ .
'make clean' in targets/*/*/ will clean romcc.
Thanks to Mats for the initial idea and implementation of a tool to do
this. This patch has almost the same behaviour as the original tool
without having to run the tool each time.
Tested for abuild-friendliness.
The patch saves ~10-12 seconds for every target using romcc. For a full
abuild run, this is ~20% time saved.
For the first 38 abuild targets, total build time is down to 13m24s
instead of 16m22s on my machine.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Mats Erik Andersson <mats.andersson@gisladisker.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3564 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This removes the false positive matches we've been seeing, and also removes
the true positive match in case there is more than one flash chip and the 2nd
or 3rd are unknown - but I think that case is uncommon enough to warrant the
improvement in the common case. Use flashrom -frc forced read if you have the
uncommon case, and/or please add the flash chip to the flashchips array.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3562 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Note that the sequence \e[m for turning off bold resets all attributes,
including color.
Signed-off-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3561 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
memalign implementation (eg. the one I sent yesterday).
Features:
- UHCI controller driver
- UHCI root hub driver
- USB MSC (Mass Storage Class) driver
- skeleton of a USB HID driver
(requires better interrupt transfer handling, which is TODO)
- skeleton of a USB hub driver
(needs several blank spots filled in, eg. power management.
Again: TODO)
OHCI and EHCI are not supported, though OHCI support should be rather
easy as the stack provides reasonable abstractions (or so I hope). EHCI
will probably be more complicated.
Isochronous transfers (eg. webcams, audio stuff, ...) are not supported.
They can be, but I doubt we'll have a reason for that in the boot
environment.
The MSC driver was tested against a couple of USB flash drives, and
should be reasonably tolerant by now. But I probably underestimate
the amount of bugs present in USB flash drives, so feedback is welcome.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3560 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3559 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
special keys.
Patrick Georgi explained:
The |0x80 codes are "break codes", that means, codes that are emitted
when the key transitions from pressed to non-pressed, so the modifier
was always in the wrong state, as soon as you pressed shift for the
first time.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3558 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Per test report from Bari Ari. Thanks!
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3557 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
All devices work, no irq storms. Enjoy.
Signed-off-by: Bari Ari <bari@onelabs.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3556 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
- Drop all '@brief's, they're not needed as we use JAVADOC_AUTOBRIEF.
The first sentence of every description will be treated as the '@brief'
automatically.
- Also, put all documentation/descriptions on top of the Doxygen-comments,
and put the '@foo' keywords at the bottom of the comments for consistency.
- Change comments for SEEK_SET/SEEK_CUR/SEEK_END from '/**@def' to '/**<'
in order to make them appear in the output.
- Drop all explicit '@struct' lines (which are optional; Doxygen will figure
out that it's a struct if the comment is right before the struct).
- Fix various typos, whitespace issues, etc.
- Fix incorrect @param variable names, e.g. change '@param n foobar' to
'@param s foobar' if the variable is named 's'.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3555 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
No code changes.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3553 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Mats Erik Andersson