Update the EC GPIO values for Birman, per schematic # 105-D67000-00B
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Icd9df120f555eb06f920f6263a8d2ab45c05baec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73971
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CBFS library performs memory mapped access of the files during loading,
verification and de-compression. Even with MTRRs configured correctly,
first few file access through memory map are taking longer times to
load. Update the SPI DMA driver to load the files into CBFS cache, so
that they can be verified and de-compressed with less overhead. This
saves ~60 ms in boot time.
BUG=None
TEST=Build Skyrim BIOS image and boot to OS. Observe ~60 ms improvement
with the boot time. Performing additional test to confirm there are no
regressions.
Before:
=======
970:loading FSP-M
15:starting LZMA decompress (ignore for x86) 760,906 (60,035)
16:finished LZMA decompress (ignore for x86) 798,787 (37,881)
8:starting to load ramstage
17:starting LZ4 decompress (ignore for x86) 1,050,093 (13,790)
18:finished LZ4 decompress (ignore for x86) 1,054,086 (3,993)
971:loading FSP-S
17:starting LZ4 decompress (ignore for x86) 1,067,778 (3,313)
18:finished LZ4 decompress (ignore for x86) 1,068,022 (244)
90:starting to load payload
17:starting LZ4 decompress (ignore for x86) 1,302,155 (11,285)
18:finished LZ4 decompress (ignore for x86) 1,303,938 (1,783)
After:
======
970:loading FSP-M
15:starting LZMA decompress (ignore for x86) 709,542 (12,178)
16:finished LZMA decompress (ignore for x86) 739,379 (29,837)
8:starting to load ramstage
17:starting LZ4 decompress (ignore for x86) 1,001,316 (12,368)
18:finished LZ4 decompress (ignore for x86) 1,001,971 (655)
971:loading FSP-S
17:starting LZ4 decompress (ignore for x86) 1,016,514 (3,031)
18:finished LZ4 decompress (ignore for x86) 1,016,722 (207)
90:starting to load payload
17:starting LZ4 decompress (ignore for x86) 1,244,602 (10,313)
18:finished LZ4 decompress (ignore for x86) 1,244,831 (228)
Change-Id: Ie30b6324f9977261c60e55ed509e979ef290f1f1
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
On Skyrim variants, the eMMC reset GPIO should be SSD_AUX_RST_L (GPIO6).
Update the port_descriptors to link the correct reset GPIO. Data
is from the skyrim variant schematics and go/skyrim-gpios.
BUG=b:278759559
TEST=reboot: 5 iterations
suspend_stress_test: 10 iterations
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I4713b3af23bb7684c9e2e81cf9c8d8a560b41a79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74512
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers
for FSP as crota is using a converged firmware image.
BUG=b:267249674
BRANCH=firmware-brya-14505.B
TEST="FW_NAME=crota emerge-brya
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage"
Cq-Depend: chromium:4430832
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I448c58f93fddc44904c1f5ef3f8939618eff536f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
The Kconfig option SOC_INTEL_ALDERLAKE_S3 suggests that it's doing
something with S3, but it's actually disabling D3Cold support.
Rename it to D3COLD_SUPPORT to make it clear what it's doing.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifc3f19912ac7ee55be8ec7a491598140f9532675
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Add supported memory part in mem_parts_used.txt, then generate.
K4UBE3D4AB-MGCL
BUG=b:267539938
TEST=run part_id_gen to generate SPD id
Change-Id: Iee41bb4511f2d77e5ddc2798f9d4db6137ed818d
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74497
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reset function, constants and include are not used outside of scom.c and
not going to be.
Change-Id: Iff4e98ae52c7099954f0c20fcb639eb87af15534
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Add boten supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K4U6E3S4AB-MGCL
BUG=b:278138388
TEST=Use part_id_gen to generate related settings
Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com>
Change-Id: I5f910393847c6494f77c009cb11f50b31bebffb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
This patch enables all DDI ports on Rex board to support display port
tunneling and dual display on TBT dock.
BUG=b:273901499
TEST=Boot google/rex and connect two displays over a TBT dock and check the display functionality.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I45ee5334fbb877bd58912c8d24920037f155dc42
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74413
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add G2 touchscreen GTCH7503 for craaskino.
Use SSFC to separate touchscreen settings.
Bit 38-41 for TS_SOURCE:
(1) TS_UNPROVISIONED --> 0
(2) TS_GTCH7503 --> 1
BUG=b:277979947
TEST=(1) emerge-nissa coreboot
(2) Test on craaskino with G2 touchscreen
(3) Test on craaskino with elan touchscreen
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I636f21be39f26a617653e134129a11479e801ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74298
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Create the screebo variant of the rex0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:276814951
BRANCH=None
TEST=util/abuild/abuild -p none -t google/rex -x -a
make sure the build includes GOOGLE_SCREEBO
Change-Id: I8d05ca7c0fe596378ca15d0734d46ad1dc63a1f9
Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74391
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Add function needed to generate ACPI backlight control SSDT, along with
Kconfig values for accessing the registers.
Tested by adding gfx register on google/magpie. Backlight controls
work on Windows 10 and Linux 6.1.
Change-Id: Iaa9872cd590c3b1298667cc80354ed3efd91c6c8
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
In order to accord with grub (see include/grub/i386/linux.h) and
comments for offsets of members of struct linux_params,
struct e820entry should be defined as __packed, otherwise,
sizeof(struct linux_params) will become 4224 (0x1080).
Fortunately, the affected area is usually not occupied.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: I09955c90e4eec337adca383e628a8821075381d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The patch moves API that gets the CSE FW partition information into
CSE Lite specific file aka cse_lite.c because the consumer of this API
is the cse_lite specific ChromeOS devices hence, it's meaningful to
move the cse lite specific implementation inside cse_lite.c file.
BUG=b:273661726
TEST=Able to build and boot google/marasov with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I49ffaec467f6fb24327de3b2882e37bf31eeb7cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74382
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 5b8596ce:
2sha256_arm: Fix data abort issue
to commit id 35f50c31:
Fix build error when compiling without -DNDEBUG
This brings in 41 new commits.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I58f6740c34670ea5a501ff2ee8cfcf9d2a1c25e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Enable early caching of the TOM region to optimize the boot time by
selecting `SOC_INTEL_COMMON_BASECODE_RAMTOP` config.
Purpose of this feature is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I3b68d13aa414e69c0a80122021e6755352db32fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73738
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Enable early caching of the TOM region to optimize the boot time by
selecting `SOC_INTEL_COMMON_BASECODE_RAMTOP` config.
Purpose of this feature is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
TEST=Able to build and boot Starlab ADL laptop to OS.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Iba554af4ff0896e133d20860ff72dd1a10ebd1e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73736
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
This patch adds CPU ID for B0 stepping (aka ES2).
DOC=#723567
TEST=Able to boot on B0 rvp and get correct CPU Name in coreboot log.
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Change-Id: I8b939ccc8b05e3648c55f8f2a0a391cb08f04184
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74300
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Boards with SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID have
special handling for the time being.
Change of aopen/dxplplusu is coupled with sb/intel/i82801dx.
Change of emulation/qemu-i440fx is coupled with intel/i82371eb.
For asus/p2b, this adds MADT LAPIC entries, even though platform
has ACPI_NO_MADT selected. Even previously ACPI_NO_MADT creates
the MADT, including an entry for LAPIC address.
Change-Id: I1f8d7ee9891553742d73a92b55a87c04fa95a132
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
In the non-timeout case in recv_ec_data_timeout, a message like this one
will get printed at BIOS_SPEW log level: "recv_ec_data_timeout: 0x00".
The "timeout" part of the function name corresponds to what the function
does, but the message will only be printed when not running into the
timeout which is a bit misleading and might suggest a problem when there
is none. To avoid this possible confusion, don't use the function name
in the printk, but use "Data from EC:" instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I521f67517f64fc64e24853d96730c3f9459f1ccc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74381
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Take variable names from soc/intel and adjust counter to
start from zero.
Change-Id: I14e1120e74e1bd92acd782a53104fabfb266c3b5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This fixes the Jenkins build error when building INTEL_ARCHERCITY_CRB
that was caused by the API change in commit 36e6f9bc04. This patch removes the
broken API function and also adds package_id log print same as previous
commit mentioned above.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I89e14b40186007ab0290b24cd6bd58015be376b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74436
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
When a mainboard selects ACPI_SOC_NVS and CHROMEOS, CHROMEOS_NVS will be
selected. This causes vc/google/chromeec/acpi/chromeos.asl to be
included in the DSDT and chromeos_acpi_gpio_generate to be called when
generating the coreboot SSDT. When a mainboard also uses
DECLARE_NO_CROS_GPIOS(), this will cause variant_cros_gpio.count to be 0
and variant_cros_gpio.gpios to be NULL. chromeos_acpi_gpio_generate only
checked if the GPIO table was non-NULL, which caused the function to
exit early and not generate the OIPG package which causes the kernel to
complain about referencing the non-existing OIPG package. To avoid this,
only exit in the GPIO table pointer being NULL case if the number of
GPIOs is non-0.
TEST=Error about missing OIPG ACPI object in dmesg disappears on birman.
Before:
[ 0.241339] chromeos_acpi: registering CHSW 0
[ 0.241468] ACPI BIOS Error (bug): Could not resolve symbol [\CRHW.GPIO.OIPG], AE_NOT_FOUND (20220331/psargs-330)
[ 0.241703] ACPI Error: Aborting method \CRHW.GPIO due to previous error (AE_NOT_FOUND) (20220331/psparse-531)
[ 0.241933] chromeos_acpi: failed to retrieve GPIO (5)
[ 0.242011] chromeos_acpi: registering VBNV 0
[ 0.242113] chromeos_acpi: registering VBNV 1
[ 0.242284] chromeos_acpi: truncating buffer from 3072 to 1336
[ 0.242462] chromeos_acpi: installed
With the patch applied:
[ 0.242580] chromeos_acpi: registering CHSW 0
[ 0.242714] chromeos_acpi: registering VBNV 0
[ 0.242817] chromeos_acpi: registering VBNV 1
[ 0.242990] chromeos_acpi: truncating buffer from 3072 to 1336
[ 0.243249] chromeos_acpi: installed
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie340003afb718b1454c2da4a479882b71714c3c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74375
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch avoids cannonlake base config to select eNEM for CAR by
default. Rather allow other SoC config to choose the applicable CAR
mode between eNEM and NEM.
CML and WHL select eNEM whereas CFL decided to use NEM for CAR setup.
Here is some background about why CFL SoC platform decided to choose
NEM over eNEM:
It was found that some coffeelake CPUs like Intel i3 9100E fail to enter
CAR mode because some MSR used by NEM enhanced are lacking. According to
the Intel SDM CPUID.EAX=07h.ECX=0 reg EBX[12 or 15] should indicate the
presence of IA32_PAR_ASSOC and CPUID.EAX=10h.ECX[1 or 2] reg ECX[2]
should indicate IA32_L3_QOS_CFG and IA32_L2_QOS_CFG respectively but
even on a Intel coffeelake CPU that works with the NEM_ENHANCED these
CPUID bits are all 0 so there is no way of knowing whether NEM_ENHANCED
will work at runtime. Instead just always use regular NEM.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibeaa4d53279ff9cbcd0b2ac5f2ad71925872355b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
The 'Starmie' is a mt8186 detachable reference design that will share
most of Corsola design. For AP firmware, there will be a few changes,
mostly in display (MIPI interface and w/o bridge), so we create it
as a variant in Corsola.
BUG=b:275470328
BRANCH=corsola
TEST=./util/abuild/abuild -t google/corsola -b starmie -a
Change-Id: Ic1556ad0031e9a24bf26fa84d7713b7b7928312a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
To provide power to MIPI panel STA_HIMAX83102_J02, add support for
regulator VIO18.
BUG=b:272425116
TEST=test firmware display pass for STA_HIMAX83102_J02 on Starmie.
Change-Id: I3c3aa105e648b87fc39f881d762002f67b4422b5
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74341
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Currently the xeon_sp code reassigns struct devices apic_id so that srat
entries can be added in a certain order.
This is not a good idea as it breaks thread local storage which contains
a pointer to its struct device cpu.
This moves the sorting of the lapic_ids to the srat table generation
and adds the numa node id in each core init entry. Now it is done in
parallel too as a bonus.
Change-Id: I372bcea1932d28e9bf712cc712f19a76fe3199b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68912
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Avoid asserts related to CNVi UPDs which are not boot critical.
Instead, add error messages which are more helpful in identifying
the issue.
BUG=none
TEST=Boot to the OS on google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I49a988b7eda009456d438ba7be0d2918826e1c36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74370
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
For security reasons, removing the efivars implementation of the option
API was considered. However, this use-case is not the "None"
option-backend (CONFIG_OPTION_BACKEND_NONE), so the SMM phase also does
not use the no-op in option.h. This causes linker errors when the
option API is called.
For example, src/soc/intel/common/block/pmc/pmclib.c and
src/console/init.c use `get_uint_option`.
Minimising code in SMM can be implemented as a follow-up.
Change-Id: Ief3b52965d8fde141c12266a716f254dd45559d5
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Secondary threads need to be added after the primary threads.
Change-Id: I3a98560760b662a7ba7efb46f5f7882fb0f7bb1f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add G2touch touchscreen support for kracko.
BOE NV116WHM-T04 V8.0 with G7500 touch panel sensor IC
BUG=b:277852921
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot & test on DUT
Change-Id: Ic065d5dc2900c6ccfee09031f7a80cefc391f5dd
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74307
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
All the variant will use the same dGPU, so make PCIEXP_SUPPORT_RESIZABLE_BARS common.
BUG=b:277974986
TEST=abuild -a -x -c max -p none -t google/brya -b hades
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: If8618f2da3133c6b52427375c55a69d7014c4881
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74371
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
The reference to a constant FCH IOAPIC interrupt count used
with GNB IOAPIC was a bit obscure.
Change-Id: I2d862e37424f9fea7f269cd09e9e90056531b643
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Read IOAPIC ID and number of interrupts from programmed registers.
Change-Id: Ic8ba395bc220fdb691118719f7b32dd7400931f4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Fred Reitberger