'used_indices' is 64 bits wide, so use a fixed-width type to make
that clear. As such, 'index' can have a value of up to 63, so use a
64 bit integer when doing the shifts to prevent overflow.
Found-by: Coverity Scan CID 1287090
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ibd089df6be60c8ea46da11e5e83cd58b2e2c54d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32854
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
AmdCreateStruct() and AmdReleaseStruct() are equally bad
when it comes to lack of correct function declarations
for definitions found in vendorcode binaryPI/AGESA.c.
Replace these with calls that go through the common
module_dispatch() functions.
Change-Id: I611bcbe2a71fb65c8eb759a9dc74cbd9cb74136e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31486
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Tested:
- Ethernet NIC
- Wifi RFKill
- USB
- LVDS, VGA with libgfxinit
- Booting with dock attached (COM1)
- Keyboard, trackpoint
- SeaBIOS 1.12
- S3 resume
- Tested in descriptor mode, with vendor FD and ME
- Add VBT to ACPI OPregion
Untested:
- SATA (likely works)
- Trackpad (my cable is broken, likely works)
- Displayport (likely works)
- Descriptorless mode
- DVD drive
- Extra battery
- model with ATI GPU
Does not work:
- Dock hotplug
- Quad core CPU (hangs during AP init, probably needs hardware mod)
- Hotplugging the expresscard slot (works with 'echo 1 | sudo tee
/sys/bus/pci/rescan')
TODO:
- proper dock support
- documentation
note: This board was hard to flash, I had to desolder the flash.
TESTED: on a R500 with an Intel iGPU, SeaBIOS 1.12, Debian 9,
Linux 4.9 from USB
Change-Id: I9e129b2e916acdf2b8534fa9d8d2cfc8f64f5815
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
All variants (t400, r400, t500, w500) use the same OPROM for the IGD.
Change-Id: I1b9db7b29b22809542f80f60a5e2eb3283fe1c02
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
When FSP UPD parameters are configured, also configure the GSPI CS lines
appropriately. GSPI driver assumes CS0 is the CS signal to use.
BUG=b:130329260
BRANCH=None
TEST=Boot Kohaku, TPM communcation still functional.
Change-Id: Ic816395b7d198a52c704e6cabcb56889150b741c
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32791
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This microcode update for CPU IDs 0x610F01/0x610F31 improves system stability:
in particular, fixes Xen hardware virtualization freezes. Also it attempts to
patch some Spectre-related security vulnerabilities. This new microcode has been
tested by multiple coreboot community members and found working perfectly.
Old version: 0x600110F [2012-01-11]
replaced by
New version: 0x600111F [2018-03-05]
Change-Id: Ied5da0ff85abb63c2db2eeafd051b8e00916d961
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28273
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: <awokd@danwin1210.me>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This microcode update for CPU ID 0x700F01 improves system stability:
in particular, fixes Xen hardware virtualization freezes. Also it attempts to
patch some Spectre-related security vulnerabilities. This new microcode has been
tested by multiple coreboot community members and found working perfectly.
Old version: 0x700010B [2013-07-09]
replaced by
New version: 0x7000110 [2018-02-09]
Change-Id: Iebe6e54d922378a8a1feb97f37b08ac50c8234b2
Signed-off-by: Mike Banon <mikebdp2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28370
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
sarien/arcada:
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration
GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM.
hatch:
GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration
GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM.
BUG=b:130764684
TEST=H1 TPM interrupt working find and able to boot from fixed boot media
Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration.
GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D16 IRQ mapped for H1 TPM.
BUG=b:130764684
TEST=H1 TPM interrupt working find and able to boot from fixed boot media
Change-Id: I1f83f938f201c6574367960b1027555767cf6f3d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Provide option in chip.h to set dynamic local clock gating
setting.
BUG=b:130764684
TEST=Able to build and boot CML.
Change-Id: Iec60076398b745e11d5025e4d7a5c35374d918a4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Provide option in chip.h to set dynamic local clock gating
setting.
BUG=b:130764684
TEST=Able to build and boot ICL.
Change-Id: Ic30a490aadb8cc9c05a19a05533ab0196c69b7f1
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch adds new function to perform gpio power management
programming as per EDS.
BUG=b:130764684
TEST=Able to build and boot from fixed media on ICL and CML.
Change-Id: I816a70ad92595f013740a235a9799912ad51665e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Adds support for the KB_ERR_CODE command on the Wilco EC. This command
is used to drive diagnostic LEDs on the platform after a failed boot.
This change also adds the Wilco EC mailbox command support to bootblock
and verstage so that those stages can use the KB_ERR_CODE command.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: I96d17baf57694e4e01c676d80c606f67054cd0c3
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32776
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add a new helper function die_with_post_code() that generates a post
code and an error string prior to halting the CPU.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: I87551d60b253dc13ff76f7898c1f112f573a00a2
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32838
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It appears that the rebase.sh script was renamed to
cross-repo-cherrypick and changed directories. Update comments to
reflect that change.
Change-Id: I863df48378feb48c9b195b1778dcaf1972a4f105
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Apply commit d7b88dcb (mb/google/x86-boards: Get rid of power button
device in coreboot) to AMD Brazos boards [1]:
> As per the ACPI specification, there are two types of power button
> devices:
> 1. Fixed hardware power button
> 2. Generic hardware power button
>
> Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
> is not set in FADT by the BIOS. This device has its programming model
> in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
> power button device by default if the power button FADT flag is not
> set.
>
> On the other hand, generic hardware power button can be used by
> platforms if fixed register space cannot be used for the power button
> device. In order to support this, power button device object with HID
> PNP0C0C is expected to be added to ACPI tables. Additionally,
> POWER_BUTTON flag should be set to indicate the presence of control
> method for power button.
[..]
> This change gets rid of the generic hardware power button from all
> google mainboards and relies completely on the fixed hardware power
> button.
The same problem exists with the AMD Hudson devices in coreboot.
For AMD Hudson (2) and Yangtze based devices this was removed in commit
44f2fab8 (AMD hudson and yangtze boards: Let mainboard declare power
button) [2].
Two devices are detected.
$ dmesg | grep Button
[ 0.209213] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.209254] ACPI: Power Button [PWRB]
[ 0.209332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.209349] ACPI: Power Button [PWRF]
$ sudo evtest
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Power Button
[..]
[1]: https://review.coreboot.org/5546
[2]: https://review.coreboot.org/27272
Change-Id: I0cbecb72f7e1bf3d051d3b7656c6af4d6f43b497
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/27496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The system should boot fine to OS on pressing power button before the
system enters G3. However, on hatch, we observe that the system waits
for few seconds at "Starting kernel" and then resets, with SD card tray
inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD#
pad reset config to PLTRST.
BUG=b:129933011
TEST=Built and verified on hatch.
Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
cbmem_find is not available in every stage.
Remove usage of cbmem_find() and use GEN_PMCON1 always.
BUG=NA
TEST=Booting Embedded Linux on Facebook FBG-1701
Change-Id: Id97d57864b3e241e8f046d9b1caebdce199a46b1
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
vboot_measure_cbfs_hook() is included when CONFIG_VBOOT_MEASURED_BOOT
is enabled, but this function is defined as 0 in vboot_crtm.h using ENV_
Remove ENV_ for vboot_measure_cbfs_hook() function definition.
This function is added to bootblock stage also.
BUG=NA
TEST=Build Google Banon and Google Cyan
Change-Id: Ic62c18db09c119dfb85340a6b7f36bfd148aaa45
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Save whether or not vboot has selected developer mode as a flag
in vboot_working_data. Other coreboot code may access this flag
without needing to consult vboot_handoff (which is in the process
of being deprecated).
BUG=b:124141368, b:124192753
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ieb6ac4937c943aea78ddc762595a05387d2b8114
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
With CB:32726 ("lib/timestamp: Make timestamp_sync_cache_to_cbmem() in
postcar") timestamps are synced from cache to cbmem in postcar as
well. For postcar, the cache lives in BSS just like ramstage. This
change updates TIMESTAMP_CACHE_IN_BSS to include both ramstage and
postcar and uses this instead of ENV_RAMSTAGE to check for cache
location.
Ideally, it would be good to get rid of timestamp cache in postcar and
ramstage completely since early cbmem init is enabled by default in
coreboot and it is guaranteed that cbmem is recovered before
timestamps are added in ramstage or postcar. This change is being
pushed in as a temporary fix while I make the changes to remove
timestamp cache from romstage and postcar completely.
BUG=b:132939309
Change-Id: I2d82a96aba954df77c9386b7bd2e2ec0973881be
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The VPD field name is dock_passthrough, not dock_passthru. Fix it.
(I assume there is no length limit)
BUG=b:132689337
TEST=check that the feature can now be controlled by the associated
enterprise policy
Change-Id: Icc2b070313fde74447279cd6ccaa4e3eb6d119ee
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32839
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to JEP106 from JEDEC, fix manufacture ID of Crucial,
Super Talnet and Micron.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I10a268a7f3bde405b95bd3a16d5d121be623c7ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Fill the DIMM serial number field for SMBIOS from the saved SPD
data that is returned by FSP.
BUG=b:132970635
TEST=This was tested on sarien to ensure that SMBIOS type 17
filled the serial number from the DIMM:
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Locator: DIMM-A
Serial Number: 41164beb
Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Set the system serial number from the VPD key "serial_number" and
the mainboard serial number from the VPD key "mlb_serial_number".
BUG=b:132970635
TEST=check serial number is set in SMBIOS based on VPD, and if there
is no VPD key found then it is empty.
Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This fixes the following changes, which made qualcomm Kconfig
appear on all platforms:
bd0b51c0be7a3e46d767
Use proper Kconfig logic.
Change-Id: I0195fd186ac39dd4258fe0781dd6d3d1b1d1679f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32805
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang does not recognize dead_code() as termination of execution. It
gives this message:
error: control reaches end of non-void function
[-Werror,-Wreturn-type]
This change adds an __attribute__((noreturn)) to ensure that clang
recognises that this function will terminate execution.
This change is more general solution to the problem that was addressed
in the specific at https://review.coreboot.org/c/coreboot/+/32798
Signed-off-by: Alan Green <avg@google.com>
Change-Id: I5ba7189559aa01545d5bbe893bced400a3aaabbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Move the DMI initialization code to northbridge folder.
Leave southbridge specific settings in bd82x6x folder and call it from
northbridge code.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ib0b47391f3309f9ab0c3a3a8d525f38f8cca73c0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use RCBA and DMIBAR macros to get rid of DEFAULT_RCBA and DEFAULT_DMIBAR.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ic9be2240ea10b17c8cc289007dccadbb9e3f69ab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Add a few comments and use known register values.
Based on the "2nd Generation Intel® Core™ Processor Family Mobile"
datasheet and the existing serialice trace.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to GNU/Linux.
Change-Id: I404515b77a22324f55581f117d79630be4ba64dd
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32071
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Enable LPC TPM support in Kconfig and add pc80/tpm to devicetree
- Enable VBT support in Kconfig and add VBT files extracted from
vendor firmware
- Remove IGPU VBIOS entries from Kconfig
- Remove unused PS2 definitions in superio.asl
- Add PWRB ACPI device entry to mainboard.asl
- Remove duplicate chipset register initialization from mainboard.c
- Move ITE Super I/O configuration to mainboard_config_superio in
romstage.c
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I2d11c55dc809b920bccf55f5f745d9f29b18bbb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
That's how we do it these days.
Change-Id: I1c088d23dff709bcdcb21310059e6a2aab84c0be
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
That's how we do it these days.
Change-Id: I6bf6460440d0f2e6973734ba8894a4be981d03c5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Needed to make libpayload build clean with -Wconversion.
BUG=b:111443775
BRANCH=none
TEST=make junit.xml shows fewer warnings with -Wconversion enabled
Change-Id: Ie193e39854d2231b6d09a2b0deeeef2873e900ab
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously cpu_index() always succeeded, but since commit 095c931
(src/arch/x86: Use core apic id to get cpu_index()) it is now possible
for it to indicate an error by returning -1. This commit adds error
handling for all calls to cpu_index(), and restores several checks that
were removed in commit 7c712bb (Fix code that would trip -Wtype-limits)
but are now needed.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I5436eed4cb5675f916924eb9670db04592a8b927
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- The link to create an account is now "Sign in" and not "Register"
- Use monospace formatting for terminal commands and file names
- Properly escape less-than and greater-than
- Correct the 'make lint' example command
- Reformat example commit messages
- Add formatting for website links
- Other whitespace fixes
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I9931bef8c30387d1c08b59973d6de9b5c0419814
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The FSP will lock down the configuration of GPP_A12, which
makes the configuration of the GPIO pin on warm reset not
work correctly.
This is only needed for the Arcada variant since it is the only variant
that uses ISH.
BRANCH=sarien
BUG=b:132719369
TEST=ISH_GP6 now works on warm resets on arcarda
Change-Id: Icb3bae2c48eee053189f1a878f5975c6afe51c71
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32831
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first
went in, gpio.c was a natural location due to the nature of the
algorithm. This is preparation for moving most of gpio.c to common
code.
Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the stoneyridge AcpiMmio code into soc/amd/common.
The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000
commonly known as AcpiMmio. Implementations beginning with Mullins
enable decode in PMx04. Older designs use PMx24 and allow for
configuring the base address. Future work may support the older version.
Comparing the documentation for AMD's RRGs and BKDGs, it is evident that
the block locations have not been reassigned across products. In some
cases, address locations are deprecated and new ones consumed, e.g. the
early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks
are now at 0x1500, 0x1600, and 0x1700.
Note: Do not infer the definitions within the hardware blocks are
consistent across family/model products.
BUG=b:131682806
Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We need to store the acpi_gpio struct, not save its address.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The 'last' variable is unused, and has been for the entire history of
this file.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I688cb60c98370bf74aa8554bab43594ff84c4e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Jacob Garber