The ACPI spec defines keywords for the GpioInt and Interrupt resources
to specify whether a given pin is wake capable. Some boards are using
the ec sync interrupt pin to wake the system so the CREC _CRS needs to
be updated accordingly.
Provide a new macro that allows a board to specify whether its ec sync
pin is wake capable.
BUG=b:243700486
TEST=Dump ACPI and verify ExclusiveAndWake share type is set when
EC_SYNC_IRQ_WAKE_CAPABLE is defined
Change-Id: I483c801ff0fee4d3ce0a3b2fc220e0bd9356a612
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Drive board specific USB configuration from the coreboot devicetree into
the opensil input block.
Add USB OC pins to chipset.cb
In the process of scrubbing opensil for public release USB became non
functional.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I506547a7abbb643d3e982e44a92f33b45cd739e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Enable the dummy function 0 that don't have an alias in the chipset
devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I607245c587a544007fd714f64901cbb50014612f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
If a framebuffer is already configured by coreboot, we need to ensure
that the framebuffer size is a multiple of GRANULE_SIZE before passing
to `mmu_add_memrange`. Otherwise, we would fail to allocate memory
region due to `sanity_check`.
Change-Id: Ia6a6400733ca10a61220087e87022f68c28e4789
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79451
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Return the PCI segment group number from data_fabric_get_pci_bus_numbers
via pointer argument so that amd_pci_domain_scan_bus can handle the PCI
segment group numbers once coreboot supports more than one PCI segment
group. For now, just print an error and return if the buses are on a PCI
segment group other than 0.
TEST=Mandolin still boots
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia53cda0ba656201c2197d05bc0d4a8fbbe8ad5d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This patch records early signs of user activity during CSE firmware
synchronization or MRC (re)training events in the event
log (ELOG_TYPE_FW_EARLY_SOL).
These can be used to ensure persistence across global reset (e.g. after
CSE sync) so that they can be later retrieved in order to build things
such as test automation ensuring that we went through the SOL
path/display initialized.
BUG=b:279173035
TEST=Verified on google/rex, event shows in eventlog after CSE sync
and/or MRC.
Scenario #1: While performing MRC update
1 | 2023-11-08 | Early Sign of Life | MRC Early SOL Screen Shown
2 | 2023-11-08 | Memory Cache Update | Normal | Success
3 | 2023-11-08 | System boot | 9
4 | 2023-11-08 | ACPI Wake | S5
Scenario #2: While performing CSE update/downgrade
11 | 2023-11-08 | Early Sign of Life | CSE Sync Early SOL Screen Shown
12 | 2023-11-08 | System boot | 13
Scenario #2: While performing both MRC and CSE upgrade
16 | 2023-11-08 | Early Sign of Life | MRC Early SOL Screen Shown
17 | 2023-11-08 | Early Sign of Life | CSE Sync Early SOL Screen Shown
18 | 2023-11-08 | Memory Cache Update | Normal | Success
19 | 2023-11-08 | System boot | 16
20 | 2023-11-08 | ACPI Wake | S5
Change-Id: Idfa6f216194fd311bb1a57dd7c86fe7446a3597c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78983
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Meteor Lake Firmware Support Package (FSP-M) for ChromeOS includes an
pre-memory graphics driver which can be leveraged to display a text
message thanks to the following FSP-M UPD (Updateable Product Data):
- VgaInitControl (bitfield):
Bit 0: Turn on graphics, setup VGA text mode and display
`VgaMessage' text centered on the screen.
Bit 1: Clear text and tear down VGA text mode and graphics before
returning from FSP-M.
- VbtPtr (address): Pointer to the VBT (Video BIOS Tables) binary.
- VbtSize (unsigned int): Size of the VBT binary.
- LidStatus (boolean): Due to limited resources at early boot stages,
the text message is displayed on a single monitor. The lid status
helps decide which display is the most appropriate.
0: Lid is closed: show the text message on the external display if
available, do not display anything otherwise.
1: Lid is open: show the message on the internal display if
available, use an external display if available otherwise.
- VgaMessage (string): Text message to display.
If the `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' flag is set, coreboot
configures the UPDs above to display a text message during memory
training and CSME update. The text message can be configured via the
locale text mechanism using the `memory_training_desc' name.
The `SOC_INTEL_METEORLAKE_SIGN_OF_LIFE' selects the LZ4 compression
algorithm for VBT because LZMA decompression is not available in
romstage by default and adding LZMA support increases the romstage
binary size more than the VBT binary is reduced.
BUG=b:279173035
TEST=Text message is displayed during memory training on a rex board
Change-Id: I8e7772582b1895fa8e38780932346683be998558
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78244
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
This patch adds a function to check if a CSE FW update is required
during this boot. The function is expected to be used during use
cases like Pre-Memory Sign of Life text display to inform user of
a CSE Firmware update.
Bug=279173035
TEST=build and boot on google/rex board. Call the function in romstage
and confirm it returns True during CSE FW update and False otherwise
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: If5fae95786d28d586566881bc4436812754636ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78243
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
By default MarginLimitCheck and RMC UPDs are enabled in FSP
which enables fast and cold boot retraining causing the
boot time increase. So, disabling the same UPDs to fix it.
Change-Id: Ib15d37dbe177f31590f23de4e239a2e82abf1335
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
LLVM/clang 17 removed support for CSR names that are no longer included
in the RISC-V ISA Manual Privileged Specification since version 1.12.
Related LLVM commit: https://reviews.llvm.org/D149278
Change-Id: I7c8f2a06a109333f95230bf0a3056c8d5c8a9132
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: Iab15fe908aa6ca81724ed7557caf70c38817ad25
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: I60e00932332801c0f62d88b7860afb330d9469e4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Rename Dockerfile to Dockerfile.base since additional Dockerfiles basing
on this one will be added later.
Change-Id: I70f2c89f739068749e1017524b6f8ef1b03d6456
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79344
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Following commands were used to test if everything builds:
* make crossgcc
* make clang
* make what-jenkins-does
Change-Id: I757e6dbac557bcb640777b819529a978bf54ed93
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zebreus <lennarteichhorn@googlemail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tell the resource manager in openSIL to distribute the available IO and
MMIO ranges across the different PCI root bridges.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0985712bc4e87b4068dea22bde1dfa371a6c47bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
vboot_fw.a is built via a sub-invocation of make, but make is not able
to track dependencies between different invocations. That means the
toplevel make assumes that the vboot_fw.a target depends only on the
dependencies explicitly listed in coreboot's Makefile (only config.h in
this case), and thus assumes that if config.h didn't change it does not
need to rebuild the library. This breaks incremental builds when files
inside the vboot repository change.
This patch marks the target as .PHONY so that it will always be rebuilt.
The vboot Makefile's own dependency tracking will then ensure that on an
incremental build we only rebuild the vboot sources that actually
changed, so if nothing changed this will just add a simple and quick
$(AR) call.
Change-Id: I8bdd4e1589124914ba1e877e04b40ee709ea4140
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79375
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updated Linux FW works with PCI gen3 speed and PSPP.
This reverts
commit 05c9a850fd ("mb/google/nipperkin: Fix WLAN to GEN2 speed")
https://review.coreboot.org/c/coreboot/+/63593
and
commit 76fddd9639 ("mb/google/nipperkin: Disable PSPP for WLAN")
https://review.coreboot.org/c/coreboot/+/63722
The changes are overlapped and are reverted together.
BUG=b:240426142 & b:228830362
The system is able to ran over 2500 cycles on Nipperkin with command
suspend_stress_test -c 10000 --wake_min 10 --suspend_min 10 \
--nofw_errors_fatal
The whole variant_update_dxio_descriptors is empty and is pushed back
to weak function.
Change-Id: Id207076542edc8ea0cabc6e02e29856c2b6803c7
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Use the generic resource_consumer method which works for memory both
above and below 4G.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I1bc553b18d08cee502b765166227810f8e619631
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76181
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Due to TCPC0 & TCPC1 exchanged compare to Neried design,
but related USB2 Ports not exchanged, keep mainboard C port to conn0.
BUG=b:312998945
TEST=can boot from external Type-c USB disk
Change-Id: Ib8df4a256bd9cd1b2ca229b09d68f97babc8092e
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
The device/device.h provides the definition for struct device used in
those files, so include this header file to make sure that it's not only
included indirectly via some other header file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6ff7cdbf0f53ada92adb53cf268e5feee9df4629
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Updating from commit id 6788bb0:
2023-08-08 12:04:21 -0600 - (microcode-20230808 Release)
to commit id ece0d29:
2023-11-14 10:19:09 -0600 - (microcode-20231114 Release)
This brings in 1 new commits:
ece0d29 microcode-20231114 Release
Change-Id: I1d65318015803d5ca11dcf52e4011f49cf3129a1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Updating from commit id ba7fd22d:
2023-11-29 01:50:20 +0000 - (Makefile: Always link libdl)
to commit id db533497:
2023-12-05 20:09:44 +0000 - (host/lib/pkcs11: Remove superfluous 'nss' directory from include paths)
This brings in 4 new commits:
db533497 host/lib/pkcs11: Remove superfluous 'nss' directory from include paths
3307f1a7 tlcl: Add `TlclEvictControl()` support
0bd01137 tlcl: Remove the redundant bytes in TlclReadPublic
9afdf0f2 sign_official_build.sh: stop messing with +x
Change-Id: Ib2ded699605dfa4032f4687e1e336297c0af1372
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79402
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
CLKREQ programming as currently implemented is completely dependent on
FSP DXIO descriptors, so move under common/fsp/pci and rename the
Kconfig to reflect the move.
TEST=build google/{guybrush, skyrim, myst}
Change-Id: I87b53d092ddc367b134c25949f9da7670a6a1d88
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79016
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Integration for additional container images might be added to the
Makefile at some later point. However, in order to build and test new
images just add a simple script which fulfills that requirement until
then.
Change-Id: Ibd0a6d59f395e074c784452849650d7f03b4f1d8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Rename Dockerfile to Dockerfile.base since additional Dockerfiles basing
on this one will be added later.
Change-Id: I611feca234ae7600f9c17ae397f9f3903879c057
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
- First a console is set up for opensil.
- After that a region in CBMEM is reserved and passed to opensil which
will use it as a buffer for input/output information.
- Finally opensil is called and the return value handled.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4833a5a86034a13e6be102a6b68c3bb54108bc9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Since the EHCI controllers in the PCH are always on the same device
functions, the device operations can be statically assigned in the
devicetree and there's no need to bind the EHCI device operations to the
PCI devices during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I92ecc3607216fb2f31639db9628898c9ce81770d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79171
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the XHCI controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the XHCI device operations to the
PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8685bec734415346a53330c9bd1aa82986995f1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79170
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Since the PCI bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the PCI bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9ca925a12e64c9a5b3bf295653bf032572ff29a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79169
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Since the SMBus controller in the PCH is always on the same device
function, the device operations can be statically assigned in the
devicetree and there's no need to bind the SMBus device operations to
the PCI device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d3745ba5aefa30efbe705155d216aa7eadd26a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79168
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Function 0 of the device that has the bridges to other buses is a dummy
function that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on that device isn't
enabled. That dummy device function is however not a PCI host bridge, so
change the comment from 'Dummy Host Bridge' to 'Dummy device function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: I6069205bd2e1cb0f75025e9f330afc50462e742a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79397
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Function 0 of the devices that have the bridges to other buses are dummy
functions that can be left enabled to not have to shuffle around the
device function numbers when the first PCI bridge on those devices isn't
enabled. Those dummy device functions are however not PCI host bridges,
so change the comments from 'Dummy Host Bridge' to 'Dummy device
function'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Nico Huber <nico.h@gmx.de>
Change-Id: Ibddfdf558d84bc44434d718b86f41bd06044b22a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Add defaults for the CONSOLE_UART_BASE_ADDRESS Kconfig symbol so that
the SeaBIOS payload will know where the MMIO address of the UART is to
build successfully without any additional user input during the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia05c3531cdbf3fd3e2e5f81b9d652f9dfef2111a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79395
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
While acpidump_print shouldn't be called with a NULL pointer as
table_ptr argument, better add a check to not end up dereferencing the
NULL pointer.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic3cc103c8a47fb8c2fe4262236ea47013af27c4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79393
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Since the LPC bridge in the PCH is always on the same device function,
the device operations can be statically assigned in the devicetree and
there's no need to bind the LPC bridge device operations to the PCI
device during runtime via a list of PCI IDs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I366226be4aba75b98e45e4832bfe129fac14dbfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Fix up the memory config for brox based on the schematics. Also,
since memory training needs to happen in romstage, initializing the
MEM_STRAP & MEM_CH_SEL gpios for use in romstage. Also consolidating
the GPIOs needing to be initialized in romstage into the baseboard
gpio.c file.
BUG=b:300690448
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I17615cda7df10e73e49fb49f736728787ef7625d
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Building the Lenovo T60/T60p, iasl 20230628 shows the remark below:
dsdt.asl 2099: PowerResource (FPwR, 0, 0)
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
dsdt.asl 2118: Name (_PR0, Package () { FPwR })
Remark 2182 - ^ At least one lower case letter found in NameSeg, ASL is case insensitive - converting to upper case (FPWR)
Address it by making it all upper case.
Change-Id: Ia7924b015e76c43818d2d82da35ce0013d721c26
Fixes: 3ab13a8691 ("ec/lenovo/h8/acpi/thermal: Add support for passive cooling")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79367
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update BND_NORTH_APB2_S's domain 5 permission to allow the access from
APU. The APU requires certain information saved in BND_NORTH_APB2_S for
voltage tuning. If this information cannot be retrieved, the APU may
operate at a high frequency with low voltage. Consequently, the APU may
not function as expected.
Change-Id: I967b138dc5517e54da7fbf94b9e502e478c991b5
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79348
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Mark Hasemeyer