Align the PSP's NVRAM item since it's intended to be updateable
in the flash device.
Change-Id: I6b28525624b95b411cc82de0cbe430ea7871149d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Allow the soc build to pass a soft fuse value to the utility. This
helps maintain compatibility across PSP generations.
Add a generic 'other' item to the amd_fw_entry structure that may
be used by non-fuse entries in the future.
TEST=Verify google/grunt amdfw.rom unchanged before and after.
Compare internal board using override before and after.
Change-Id: I26223f0b42ad28c43d9bd87419a2a8f719ee91cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Instead of assuming GbE/PDR/EC regions may exist or not, check if there
is a valid region defined in the descriptor and set the region access
permissions based on that.
The net effect change is to enable the use of the PDR region on the
sarien platform, which also uses the GbE and EC regions.
This results in the following example changes:
mb/google/sarien (GbE, PDR, EC)
. DESC BIOS ME GbE PDR EC
-BIOS r rw rw r
-------------------------------
+BIOS r rw rw rw r
mb/google/eve: (no GbE, no PDR, no EC)
. DESC BIOS ME GbE PDR EC
-BIOS r rw rw r
-ME r rw r
-GbE r rw
-EC r rw
-------------------------------
+BIOS r rw
+ME r rw
+GbE
+EC
BUG=b:134703987
Change-Id: I7aeffc8f8194638c6012340b43aea8f8460d268a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33273
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As long as we keep the IS_ENABLED() definition in libpayload for
compatibility, we should check that IS_ENABLED() usage doesn't
sneak back in.
Also remove all other IS_ENABLED() checks.
Change-Id: Id30ffa0089cec6c24fc3dbbb10a1be35f63b3d89
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add T32 scripts that allow debug of any coreboot stage
on qcs405.
Change-Id: I4e792a2806e5ebd3b4075c7bb69c43587920deae
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Nitheesh Sekar <nsekar@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29951
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fix the following error from clang invoking gcc linker with wrong arg:
i386-elf-gcc: error: unrecognized command line option '--rtlib=libgcc';
did you mean '-static-libgcc'?
clang-4.0: error: linker (via gcc) command failed with exit code 1
Just remove --rtlib switch from CFLAGS relating to clang
Change-Id: Ife7ef6b6b47a04598fc67b40751bc59eed93b4af
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/21354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
inteltool can't detect whether address mapping is normal or
mirrored, which in turn may be cause RAM initialization to
fail when using spd.bin generated by inteltool.
Mention this in readme as it may help someone.
Change-Id: I8d24e4d9332bdcf484987581dd6941e2bf9c4f87
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
For x64 and x86_32 configurations, apply the -march flag to both GCC and
Clang flags.
This solves the problem of Clang-compiled coreboot failing due to Clang
emitting SSE instructions for code that is executed while SSE is not
enabled.
This patch takes functionality targeted for GCC configurations and moves
it down a few lines, modifying CFLAGS instead of GCC_CFLAGS in order
that it applies to both GCC and Clang.
This is an alternate patch to CB:32887.
Signed-off-by: Alan Green <avg@google.com>
Change-Id: I6a6a6136b01a64d46f730ed19ebbeaadaf2183df
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
It is possible that 'lnode->val' is set to 0 on a previous iteration of
the loop, so check that it is non-null here before dereferencing it.
Change-Id: I9827dd5623eaf11240df605a8b50ff9e27a5fce0
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1129149
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The 'new_type' function already allocates memory, so it is only
necessary to clone the existing type if this function is not called.
Change-Id: I47065204c5f4b6bab022bd7ccf19838c3ce1f86e
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity Scan CID 1129106
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It is possible that 'filename' is still null in this if statement,
so we add an extra check to prevent a null dereference in strcmp.
Change-Id: Iaba95b63a4d552051e0c56445522de7274dfd0b3
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1395330
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32922
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
In each of these cases it is possible that 'member' is NULL at the
beginning, which will skip the earlier while loops entirely and cause
a NULL dereference later on. Add extra error checks to prevent this.
Change-Id: Ib5873c0830b71397ef661976d387fc6ce33c5cd1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1129147, 1129152, 1129153, 1129154
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
SMBus adapter will not appear if i2c-i801 module is not loaded.
Added it to the readme.
Change-Id: I3de0e02f13178d78b8cc02a74a745ad66e929070
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
When using -Werror=old-style-declaration, gcc reports an error:
"'static' is not at beginning of declaration"
Tested on 945G-M4 board.
Change-Id: I7216a4fab2d5878066c871166e6a481d1f201a9d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
If 'class > LAST_REGC', then there will be an out-of-bounds read when
accessing 'regcm_bound'. Prevent this by skipping to the next iteration
of the loop. Note that this should not generally happen anyway, since
'result' represents a bitset for the indices of 'regcm_bound', and so
iterations where 'class > LAST_REGC' should already be skipped by the
previous continue statement (since those bits of 'result' should all be
zero).
Found-by: Covericy CID 1129122
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Id5f5adb0a292763251054aeecf2a5b87a11297b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The corner case of an empty string literal was causing romcc to
segfault. This checks if the literal is empty, and if so allocates a
size one buffer for the terminating null character. A test case for
this is added to ensure it doesn't happen again.
Found-by: Coverity CID 1129099
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I067160a3b9998184f44e4878ef6269f372fe68bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Free 'arg_type' after it is used to prevent a memory leak.
Found-by: Coverity Scan CID 1129114
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I5e8661547bb7623463ed23fc45269049ffb8c50e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
'used_indices' is 64 bits wide, so use a fixed-width type to make
that clear. As such, 'index' can have a value of up to 63, so use a
64 bit integer when doing the shifts to prevent overflow.
Found-by: Coverity Scan CID 1287090
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ibd089df6be60c8ea46da11e5e83cd58b2e2c54d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32854
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It appears that the rebase.sh script was renamed to
cross-repo-cherrypick and changed directories. Update comments to
reflect that change.
Change-Id: I863df48378feb48c9b195b1778dcaf1972a4f105
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I688cb60c98370bf74aa8554bab43594ff84c4e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
At least one channel must be present, so print an error if there is
not. However, we cannot always assume it will be the first channel,
so make the appropriate selection when printing the timings.
Found-by: Coverity Scan #1370{584,585,588,589,590-596,600}
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I6b59989242e498474782876302e0850e3e4cf2d3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
'name' and 'env' are supposed to be file system paths,
but could overflow the buffer if configured incorrectly.
Let's avoid that entirely.
Found-by: Coverity Scan #1362515
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I1aef36819d49ebcbde1c51995dc0961c85e74150
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
It is possible that 'malloc_fo_sub' and 'remalloc_fo' can
fail, so add appropriate error checks for those cases.
This incidentally fixes a possible memory leak when
'malloc_fo_sub' succeeds but 'remalloc_fo' does not.
Found-by: Coverity Scan #1396050
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I944b67f5cdcfd7a687e81d8bb01a209c9dc9b0b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
As the previous comment indicated, this null check is
currently superfluous, but adding it in makes Coverity
happy, and future-proofs the code in case someone changes
the internals of 'find_fcba' later and forgets/doesn't know
to update this error check.
Found-by: Coverity Scan #1395066
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I594cd0098f5b36cef5b3efc4c904710d3ba9b815
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
We keep the support, though. Just now that `libgfxinit` is fixed, we
don't need the distinction anymore. Causally, we also don't need
CPU_INTEL_MODEL_306AX any more.
TEST=Played tint on kontron/ktqm77. Score 606
Change-Id: Id1e33c77f44a66baacba375cbb2aeb71effb7b76
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Should include vb2_sha.h header when SHA library functions or
constants are required. This replaces NEED_VB2_SHA_LIBRARY.
BUG=b:124141368, chromium:956474
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I9f32174dbf3de05fbe5279cb8017888757abf368
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1583820
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add the new field 'smbios_slot_desc', which takes 2 to 4 arguments.
The field is valid for PCI devices and only compiled if SMBIOS table
generation is enabled.
smbios_slot_desc arguments:
1. slot type
2. slot lenth
3. slot designation (optional)
4. slot data width (optional)
Example:
device pci 1c.1 on
smbios_slot_desc "21" "3" "MINI-PCI-FULL" "8"
end # PCIe Port #2 Integrated Wireless LAN
Tested on Lenovo T520.
Change-Id: If95aae3c322d3da47637613b9a872ba1f7af9080
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32307
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Sunrise Point-LP is used on Skylake and KabyLake platforms,
but the PCH IDs differ.
This commit adds the PCH IDs for Skylake mobile platforms
and renames the Kabylake macros to distinguish them.
Used Intel documents:
- 332995-001EN (I/O datasheet vol. 1)
- 332996-002EN (I/O datasheet vol. 2)
Change-Id: Id46224fcc44b06c91cbcd6c74a55c95e1de65ec6
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
TEST=build & run
Change-Id: I222a56f1c9b74856a1e1ff8132bab5e041672c5d
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25207
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If override tree does not have any device, then the chip info
structure in it cannot be associated with the correct device and ends
up being added as a standalone chip info structure without any device
actually using it. This change prevents this condition by throwing an
error during compilation.
BUG=b:130342895
Change-Id: I7b8bb6b3228030a465976ca32ce8ef63f41365dd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The last attribute was never returned.
Fix size compare to retrieve all attributes.
Manually tested and seen all attributes, including the last one.
Change-Id: I08df073158a0f285f96048c92aa8066fa4f57e6f
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Support for ACPI specification version 6.3:
Add PCC operation region support for the AML interpreter. This adds PCC
operation region support in the AML interpreter and a default handler for
acpiexec. The change also renames the PCC region address space keyword to
PlatformCommChannel.
Support for new predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG.
These methods provide OSPM with health information and device boot
status.
PDTT: Add TriggerOrder to the PCC Identifier structure. The field value
defines if the trigger needs to be invoked by OSPM before or at the end
of kernel crash dump processing/handling operation.
SRAT: Add Generic Affinity Structure subtable. This subtable in the SRAT
is used for describing devices such as heterogeneous processors,
accelerators, GPUs, and IO devices with integrated compute or DMA
engines.
MADT: Add support for statistical profiling in GICC. Statistical
profiling extension (SPE) is an architecture-specific feature for ARM.
MADT: Add online capable flag. If this bit is set, system hardware
supports enabling this processor during OS runtime.
New Error Disconnect Recover Notification value. There are a number of
scenarios where system Firmware in collaboration with hardware may
disconnect one or more devices from the rest of the system for purposes
of error containment. Firmware can use this new notification value to
alert OSPM of such a removal.
PPTT: New additional fields in Processor Structure Flags. These flags
provide more information about processor topology.
NFIT/Disassembler: Change a field name from "Address Range" to "Region
Type".
HMAT updates: make several existing fields to be reserved as well as
rename subtable 0 to "memory proximity domain attributes".
GTDT: Add support for new GTDT Revision 3. This revision adds information
for the EL2 timer.
iASL: Update the HMAT example template for new fields.
iASL: Add support for the new revision of the GTDT (Rev 3).
More changes in this version at https://acpica.org/node/166
Change-Id: I3a825f568423c3a703ad1c13da976af322ed9de2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Release Note :
https://cmake.org/cmake/help/v3.14/release/3.14.html
"The FindFontconfig module added by 3.14.0 accidentally used uppercase
FONTCONFIG_* variable names that do not match our conventions.
3.14.1 revises the module to use Fontconfig_* variable names.
This is incompatible with 3.14.0 but since the module is new in the 3.14
series usage should not yet be widespread"
Change-Id: Ief7f5e8309597093f061789926bd3bd2ed3aec2d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
openjdk-8-jre-headless is no longer available in the debian image we're
basing the coreboot-sdk off of. Update it to 'default-jre-headless'.
Change-Id: I60f6ecbaedccc0da61f96e0bce4122406ba4bd91
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
build.h provides iasl's version but right now assumes that it's kept in
util/crossgcc/xgcc/bin. Often true, but not always, so use the one found
in .xcompile to query the version as that's the version that is used in
coreboot builds.
Change-Id: Iaeedc22e0e14fa96b4f2a68127f405c7f0c9d5cc
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
if git log --no-show-signature is not supported, retry without.
Change-Id: I9ee1f8e887cde5e4d6c5e6958f269c62572cdd53
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32299
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Both values in each array are only initialized if
`two_channels` is true, so we need to check that first.
Found-by: Coverity Scan #1370{584,585,588,589,590-596,600}
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I592bc6ae00f834f74a61668d7a3919014ec635f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The Flashmap (FMAP) was not clearly documented. The new flashmap.md
explains where to find more details about that and how / why it was used
in coreboot. Also explained what is FMD and how to use it (based on
original README.fmaptool).
BUG=None
TEST=None (only documentation)
Change-Id: Ia389e56c632096d7c905ed221fd4f140dec382e6
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This check had very few false positives which were all easily resolved,
and it's unlikely that further false positives will become problematic
in the future. On the other hand, it does detect a very severe bug (when
you think you're using a Kconfig but you aren't due to a typo), so since
warnings are currently not very visible, let's turn this into an error
because the pros clearly outweigh the cons for that.
Change-Id: I897b5e13d3242fb77b69f0bd3585baa7476aa726
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32257
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
libssl1.0-dev is no longer available:
- Update to libssl-dev
- Add libcrypto++-dev to provide additional crypto libraries not
available in libssl-dev.
Change-Id: Ie10e14ebf7ae849301302008ee6ffeec1f40ccab
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
The patches added to `make` require that we use automake & aclocal
to rebuild the configuration, but version 1.15 of autotools is
expected. After debian sid updated to autotools 1.16, the tools can't
be located.
We'll just pretend to have version 1.15 with symbolic links. This
doesn't seem to be a good solution but gets the job done.
Change-Id: I9f616b96e728106e7adf321325caa06808e064c2
Signed-off-by: Martin Roth <martinr@coreboot.org>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/28544
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
%lx is the right format string for printing longs.
Found-by: Coverity Scan, CID 1229686, 1229687
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ib7ab54dc039bdd60969c79f3c881d69fc68f0d2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
When invoking 'make menuconfig' with gcc 4.9.2 an error is thrown:
ld: build/util/kconfig/lxdialog/checklist.o: undefined reference
to symbol 'acs_map'
This happens with ld version 2.24 and newer when menuconfig is
executed for the first time after make clean. This does not happen
with ld 2.20 (part of gcc 4.4.7).
It can be fixed with the flag -ltinfo in HOST_LOADLIBES.
Change-Id: I6216bb4d276d4bf98aa4ec06457b809fdcd73235
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Opens a binary file to extract DDR SPDs using known bits.
At the moment only DDR4 SPDs are supported.
Dumps the found SPDs into the current folder, as either
binary or hex encoded file.
Works with python2 and python3.
Change-Id: I26dd73d43b724ea6891bb5b6e96856c42db8577c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This patch changes a few more Kconfig linter warnings to errors that
currently do not show up in the tree and that seem unlikely to become
false positive in the future. One instance of duplicated code that
essentially checks for the same thing was consolidated.
It also adds a new test for references to boolean Kconfig options that
do not use the CONFIG() wrapper macro. It's a little flaky (e.g. hard to
handle multi-line comments), but it should be helpful the majority of
the time as a warning in a Jenkins comment.
Change-Id: I975ee77d392ed426f76f7671d9b6ef9441656e6a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The last part of the file has not been modified much.
Change-Id: Icc45824d5d1298146f459d75f0a5121dbdd70d41
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30969
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Since the values are hardcoded, we might as well hardcode values that
make sense.
Change-Id: I3ac0e2d74a42c1fe55b1cdc3e2a970ae80cc9f37
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30963
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 626ba097a2.
This change was submitted under the incorrect assumption that there was
agreement on a coding style change. There wasn't, so while the issue is
under discussion we should revert to the previous status quo.
Making clang-format honor the line length is a separate issue from
changing the line length, and can be reuploaded as a separate CL.
Change-Id: I433c82c95a897b3113cace3668cc8ce0f1ab75bf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Values from
- Intel doc 337347 rev4
- coreboot soc/intel/cannonlake/include/soc/gpio_soc_defs_cnp_h.h
On Coffeelake H (using Cannonlake / Cannonpoint PCH) p2sb is not
accessible. Using a static value instead. 0xfd000000 is a common value
chosen by coreboot and non-coreboot firmware.
Change-Id: Id637f703ab0a99eb0908ecdc3da27ba80db1c6b8
Signed-off-by: Thomas Heijligen <thomas.heijligen@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
A side effect of the change 8e0dca05
"util/amdfwtool: Add generic image copy function"
was to treat a read operation of zero bytes as a failure. Some
implementations exist that use zero length files as a means of
removing functionality. This causes amdfwtool to exit with an
error.
Put the zero length capability back in, and generate the requested
table entry with a length field of 0x0.
TEST=Boot google/grunt, inspect PSP directory table
BUG=b:128507639
Change-Id: Ifc9204dbbf6b107f06116362358ab9d22caa71df
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31891
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This symbol was removed in
a6be58fece ("nb/intel/sandybridge: Remove the C native graphic init")
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I87801552e1c37162897949ec0db3904f850f0bfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The root port IDs on bd82x6x.go were for both the PCH and the CPU PCIe
root ports. Put the latter on sandybridge.go instead, and add missing
IDs.
Change-Id: I04b5220c460f1930accd64b63c11f512581f2c6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30962
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch updates the Kconfig linter to support the new CONFIG() macro
in the same manner that IS_ENABLED() was previously supported. It will
be flagged when it is used on non-bool Kconfigs or used with #ifdef, and
it is supported for checking used Kconfigs. Remaining uses of
IS_ENABLED() are flagged with a deprecation warning.
Change-Id: I171ea8bc8e2d22abab7fc4d87ff4cf8aad21084f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31776
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some of the older chipsets that are known not to have ME at all
were removed for some reason, add them back in.
Also some newer chipsets/ME models were missing, add them in.
Change-Id: Iaed9a342e478a483113bf81d25042a6041fbc4ba
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Complete the removal of the fanless command line options. The only soc
using them has been converted to use the subprogram option instead.
TEST=Verify amdfw.rom is unchanged before and after the conversion
BUG=b:126691068
Change-Id: I187f17743cc98cc136b0df61caf8e95d17f98d51
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31737
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Separate the type field for the PSP directory table to better match the
AMD Platform Security Processor BIOS Architecture Guide (order #55758,
NDA only). Instead of a 32-bit type, change to an 8-bit value and an
8-bit subprogram field to allow for a more generic application across
family/model products.
This patch also eliminates the "fanless" types, previously added for
stoneyridge, and converts the --smufnfirmware and --smufnfirmware2
arguments to use a subprogram value of 1.
Subsequent patches will change the stoneyridge makefile to use the
new option, and eliminate the fanless arguments.
TEST=Boot google/grunt, confirm no difference in amdfw.rom file.
BUG=b:126691068
Change-Id: If8f33000c31cba21f286f54459de185c21e46268
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31735
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace variables and function arguments with a context that may be
maintained and passed. Add macros to clarify the pointer math. Add
functions to generate tables instead of relying on correct ordering
and math. Use defined sizes for tables instead of arbitrary additions
to an index.
TEST=Verify no difference in amdfw.rom for google/grunt before and
after, and verify a grunt build with PSP_COMBO=1 runs.
Change-Id: I7ad12fa5d615d1aa3648db40e3ea75f8cf2ed59a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Consolidate the code that opens, stats, copies, and closes the
individual files into a single function.
TEST=Verify no difference in amdfw.rom for google/grunt before
and after the patch is applied
Change-Id: I2da0dd79186ccc8c762b58cf3decb9980378a5f7
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Rename psp_fill_head() and call it with the cookie to populate the
header. The combo header and PSP directory header are similar and
should be calculated the same way.
Change-Id: I7e634542de65576addadbe683596cbe572de3dcd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31732
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There are effectively two unique sets of arguments for the utility,
causing one of two tables to be constructed. Both tables are
identical, however, and therefore the only practical difference is
the offset in the Embedded Firmware Structure which holds the pointer
to the table.
This patch is part 2 of 2 to reduce the number of command-line options
to amdfwtool. Part 1 added the --combo-capable option that helps
put the PSP directory pointer in the correct location. Part 2
removes the duplicated table, the support code, options, and updates
the usage text.
TEST=Build before/after images for grunt, bettong, apu2, and diff
hexdumps of the amdfw.rom files. Built/ran grunt with PSP_COMBO
defined as 1.
BUG=b:126691068
Change-Id: I542a7f5023137f30fbe00533452d4448117df487
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
There are effectively two unique sets of arguments for the utility,
causing one of two tables to be constructed. Both tables are
identical, however, and therefore the only practical difference is
the offset in the Embedded Firmware Structure which holds the pointer
to the table.
This patch is part 1 of 2 to reduce the number of command-line options
to amdfwtool. Create a new option that is used as an indicator for
which Embedded Firmware offset to use. Part 2 will be added once
makefiles no longer use the duplicated options.
This patch also adds two new options for fanless SMU firmware to be
used instead of the ones that will be removed in part 2.
TEST=Verify no difference in amdfw.rom for google/grunt before
and after the patch is applied
BUG=b:126691068
Change-Id: I249700c6addad1c0ecb495a406ffe7a022dd920b
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The fletcher32 algorithm generates a sum over a range of 16-bit
WORDs. Change the function's interface to be more generic,
accepting a more intuitive size in BYTEs. Don't require the
caller to understand the nature of the algorithm and convert to
WORDs prior to calling.
TEST=Verify no difference in amdfw.rom for google/grunt before
and after the patch is applied
Change-Id: Iad70558347cbdb3c51bd598479ee4484219c0869
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31728
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the use of multiples of DWORDs with structures that
describe the Embedded Firmware Table, and PSP directory
headers & entries.
TEST=Verify no difference in amdfw.rom for google/grunt build
(Family 15h Models 70h-7Fh), amd/bettong (F15h 60h-6Fh),
and pcengines/apu2 (F16h 30h-3Fh). PSP_COMBO builds but
was not verified.
Change-Id: If05952d9282a0fa5a397984eaae671fb33f6134a
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Correct an oversight in the utility that attempts to match up eligible
PSP directory table entries with blob names passed on the command
line. A 1:1 matchup of items shouldn't be assumed, so the i iterator
shouldn't be used to walk both lists.
This change has no effect on google/grunt (Family 15h Models 70h-7Fh),
but eliminates blank entries of all FF's on builds of amd/bettong
(F15h 60h-6Fh) and pcengines/apu2 (F16h 30h-3Fh). Removal of entries
also affects the checksum accordingly.
TEST=Build before/after images for grunt, bettong, apu2, and diff
hexdumps of the amdfw.rom files
Change-Id: I13e359d3cc6f5ce408bbf077feec3707ee2b3838
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31726
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Until now the TCPA log wasn't working correctly.
* Refactor TCPA log code.
* Add TCPA log dump fucntion.
* Make TCPA log available in bootblock.
* Fix TCPA log formatting.
* Add x86 and Cavium memory for early log.
Change-Id: Ic93133531b84318f48940d34bded48cbae739c44
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The __pci_driver and __cpu_driver uses variable length arrays which are
constructed by the linker at build-time.
The linker always place the structs at 16-byte boundary, as per
"System V ABI". That's not a problem on x86, as the struct is exactly
16 Bytes in size. On other platforms, like x86_64 it breaks, because the
default data alignment isn't SysV compatible.
Set -malign-data=abi to make x86_64 gcc use the SysV psABI.
Fixes broken __pci_driver and __cpu_driver on x86_64.
Change-Id: I2491d47ed03dcfd8db110dfb181b2c5281449591
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on not publicly available IT8613E Preliminary Specification V0.3.
Change-Id: Iec99d4d998f645dbad9c803d6d5477580b0bccc4
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This is a great check, but unfortunately it's currently not effective
because most uses of IS_ENABLED() do not have whitespace in front of
them (they're mostly used as part of an if (IS_ENABLED(...)) condition).
This patch makes the linter a little more generous in what it considers
in scope to avoid these false negatives in the future.
Change-Id: I2296410c73cd6e918465c90db33e782936bec0f9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31746
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When updating firmware, it is very often that we may want to preserve
few sections, for example vital product data (VPD) including serial
number, calibration data and cache. A firmware updater has to hard-code
the section names that need to be preserved and is hard to maintain.
A better approach is to specify that in FMAP area flags (the `area_flag`
field) using FMAP_AREA_PRESERVE. With this patchset, a FMD parser flag
"PRESERVE" is introduced and will be converted to FMAP_AREA_PRESERVE
when generating FMAP data (by fmap_from_fmd.c).
For example, The FMD statement:
RO_VPD(PRESERVE)@0x0 16k
will generate an FMAP firmware section that:
area_name = "RO_VPD"
area_offset = 0
area_size = 16384
area_flags = FMAP_AREA_PRESERVE
BUG=chromium:936768
TEST=make; boots on x86 "google/eve" and arm "google/kukui" devices
Manually added 'PRESERVE' to some FMD files, and verify (by running
fmap.py) the output coreboot.rom has FMAP_AREA_PRESERVE set
Change-Id: I51e7d31029b98868a1cab0d26bf04a14db01b1c0
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The recent toolchain update also updated binutils, which has a new
relocation type, introduced with commit bd7ab16b
(x86-64: Generate branch with PLT32 relocation).
Add support for R_X86_64_PLT32, which is handled as R_X86_64_PC32.
Add comment explaining the situation.
Fixes build error on x86_64.
Change-Id: I81350d2728c20ac72cc865e7ba92319858352632
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31468
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The idea of "annotation" for firmware sections was pretty flexible, but
in future we will want multiple attributes applied to same area. For
example, indicate the section must be preserved when updating firmware
so serial number or MAC address can be preserved.
The solution here is to extend annotation so it can take multiple
identifiers (flags) in a row. For example, to declare a 64KB COREBOOT
section as CBFS using annotation:
COREBOOT(CBFS)@0x0 64k
If there's a new flag "PRESERVE" indicating the section must be
preserved before update, we can declare it following CBFS flag:
COREBOOT(CBFS PRESERVE)@0x0 64k
The flags are directly parsed in fmd_parser, and stored in an union
flashmap_flags. Output modules can choose to ignore or process the
flags.
Currently the only supported flag is "CBFS" (for backward compatible
with annotation). There will be more new flags in follow up patches.
BUG=chromium:936768
TEST=make; boots on x86 "google/eve" and arm "google/kukui" devices
Change-Id: Ie2d99f570e6faff6ed3a4344d6af7526a4515fae
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31706
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
git diff needed to emit diffs without prefix (e.g. a/ and b/) for
clang-format-diff to be able to work.
Also require that the test succeeds, but note that it only runs on
trees whitelisted in $(top)/.clang-format-scope.
Change-Id: I7e9a32eb9281b5cb0b45506a206500fd1d315372
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
80 chars + 2 tabs was the compromise we got to in the last round of
discussion.
Change-Id: I9293a69d1bea900da36501cde512004d0695ad37
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Apollo Lake has four GPIO communities each with a single group named
after the physical location of the pads (I guess): North West, North,
West and South West.
Also add some logic to be able to tag the default function of a pad
(with an asterisk before its name). This seems easier to review in the
tables, but we could also encode the number of the default explicitly
instead.
Used Intel documents:
- 334817-001 (datasheet vol. 1)
- 334819-001 (datasheet vol. 3)
Change-Id: I5cd687fdc1d2ae81f2e948178bf319897b47f031
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Signed-off-by: Felix Singer <migy@darmstadt.ccc.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
When updating firmware, we may need to preserve some sections like VPD,
calibration data, ... etc. The logic can be hard-coded in updater as a
list of known names, but a better solution is to have that directly
declared inside FMAP area flags.
To do that, the first step is to apply the changes in flash map
(http://crosreview.com/1493767). A new FMAP_AREA_PRESERVE is now
defined and will be set in future with new syntax in FMD parser.
BUG=chromium:936768
TEST=make; boots an x86 image.
Change-Id: Idba5c8d4a4c5d272f22be85d2054c6c0ce020b1b
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Relocations for PC relative instructions must not emitted.
As PC64 are unlikely with current code, it never was an issue.
Change-Id: Ife472a287ff15b1c04a516e25ff13221441fd122
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/31469
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The name was wrong. mFCPGA478 is actually a pseudonym for mPGA478MN,
the successor of the socket that was meant.
The official name of this socket is mPGA478MT. But "Socket M" is much
easier to distinguish.
Change-Id: I4efeaca69acddfcdc5e957b0b521544314d46eeb
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/31642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Because coreboot's asserts aren't fatal by default, scan-build finds
problems in code that is actually protected by an assert. This
change fixes that and allows us to add asserts to protect
against other failures.
Change-Id: I9fa605d6309bb40a9cef33b434c9256bf731f457
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/31650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
* Introduce a measured boot mode into vboot.
* Add hook for stage measurements in prog_loader and cbfs.
* Implement and hook-up CRTM in vboot and check for suspend.
Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Upstream intelmetool is out of date; I suggest I archive it
instead of trying to merge coreboot's changes into it.
However I would like to preserve the licensing of files in the tool
as GPLv2+ where possible instead of GPLv2-only.
Change-Id: I47b1ff2734f54c65f4214b39244bd868ef44b83c
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/c/31587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
VBT on Intel(R) systems is available via sysfs as
/sys/kernel/debug/dri/0/i915_vbt
However the size of this file reads as 0 causing
intelvbttool to fail. This patch implements incremental reads
with realloc for such cases or whenever the file size is not
available (e.g. reading from stdin).
After this patch is applied, intelvbttool can be used as follows:
sudo intelvbttool -f /sys/kernel/debug/dri/0/i915_vbt -d
Change-Id: I5d17095a5747550b7115a54a7619b7294a846196
Signed-off-by: Alex Feinman <alexfeinman@hotmail.com>
Reviewed-on: https://review.coreboot.org/c/31531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Allow EC region to be readable by BIOS/CPU so that flashrom
can read it.
BUG=b:123199222
TEST=Build coreboot with CONFIG_LOCK_MANAGEMENT_ENGINE set,
run firmware_LockedME test.
Change-Id: I306c74a0893355e57632a22a712b1f4fdaa19306
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Put the FMAP FMAP region right above the coreboot CBFS region.
The other regions like RW_MRC_CACHE and CONSOLE often have alignment
requirements so it makes sense to put those on top. This also
simplifies the code the generate the default fmap a little.
Change-Id: I24fa6c89ecf85fb9002c0357f14aa970ee51b1df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30419
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The coreboot table entry containing the memory entries can have
fields unnaturally aligned in memory. Therefore one needs to perform
an aligned_memcpy() so that it doesn't cause faults on certain
architectures that assume naturally aligned accesses.
BUG=chromium:925961
Change-Id: I28365b204962ac89d65d046076d862b6f9374c06
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Manoj Gupta <manojgupta@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Now running 1.8.3, with a fix to the theme so search still works, and
a recommonmark version that properly rewrites links to .md files.
Change-Id: Ice25554c77a398a71782c8d1cb9e205debd80d67
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Version 2 IFD will have flmstr5 as EC region access control, consider it
during descriptor lock/unlock process.
BUG=N/A
TEST=Build coreboot with CONFIG_LOCK_MANAGEMENT_ENGINE set, and check
flmstr5 value by hexdump the SPI image at offset FMBA+0x90.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I970064dcf6114a15f054ab7c44349841deb99dc8
Reviewed-on: https://review.coreboot.org/c/31111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cannonlake and Icelake have same read/write region permission settings
with skylake and kabylake, so add it here as well.
BUG=b:123199222
TEST=Turn on CONFIG_LOCK_MANAGEMENT_ENGINE and build image, check the
setting matches 0x0D for read and 0x04 for write.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I71d8b815c7dff7dcbcff2bf77c85ebf80b8df6d2
Reviewed-on: https://review.coreboot.org/c/31104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This reverts commit 48c24ce5ee.
Reason for revert: Commit broke bincfg, and sym_table as a global
variable is less bad than passing it around in function calls.
Change-Id: Ib8d64a1dc201d17a4e278ab0114958b6807a45ac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
F81866 detection tested with the iBASE SI-613:
superiotool r4.9-420-g034e5e6
Found Fintek F81866 (vid=0x3419, id=0x1010) at 0x4e
F8196* detection is based on chip IDs provided by iBASE, but untested.
Change-Id: I7210e1523a188a8593cd03547bb0c95cd3e7aa39
Signed-off-by: Kyle Stevenson <kstevenson@comqi.com>
Reviewed-on: https://review.coreboot.org/c/31052
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Converts `auto.conf` to an Ada spec file. Write to
$(obj)/cb-config.ads and set the package name to
`CB.Config`.
Change-Id: I97c060d8a613c74a82a18aff9524ad4b01f9df56
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With the memory controller the separate sockets becomes a useless
distinction. They all used the same code anyway.
UNTESTED: This also updates autoport.
Change-Id: I044d434a5b8fca75db9eb193c7ffc60f3c78212b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31031
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On FreeBSD, this test was failing with the error:
"grep: Argument list too long"
- Remove support for testing coreboot not in a git repo. Many of
the other linters already don't support this.
- Use git grep to find offending files, then xargs to print out
the lines.
Change-Id: Ic017dc3465fd9a46ff4e6ec5ef16396e963483cd
Signed-off-by: Martin Roth <martinr@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/28448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
After merging util/crossgcc: derive date and version from latest commit
(https://review.coreboot.org/c/coreboot/+/30804),
crossgcc build is broken in internal repository due to long version
name;coreboot.org repository is ok because it uses short tag name.
The patch uses "git describe" which is dependent on git tag name.
If tag name is little bit long, it can cause crossgcc build failed.
To avoid this issue, use only short version of hash string
which is fixed length. And it's enough as version string,
because we also use date(CROSSGCC_DATE) together.
TEST=Build crossgcc in both coreboot.org and internal repository
which uses longer tag name and check version string in build log.
Change-Id: I405b2e4e5c05831c25aebf1c73a281adab8ef452
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-on: https://review.coreboot.org/c/31001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
With commit aaced4a (cpu/intel/common: Use a common acpi/cpu.asl file),
some model_206ax code was moved to a common place. However, autoport
was not updated accordingly.
Change-Id: I51b7e9c5d226f591596c33d6a3cb326a34420493
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30967
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ITE8528 which can be found on the wedge100s.
Most registers are dumped from hardware.
No datasheet is publicy available.
Change-Id: I24b12c0032157a4959336f8b51dadbe7b2e09d66
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/30801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It was only hooked up for galileo board when using the obsolete
FSP1.1. I don't see how it can be useful...
Change-Id: Ifd7cbd664cfa3b729a11c885134fd9b5de62a96c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30691
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This way date and version are automatically updated when util/crossgcc
was changed, the version contains the commit ID and we have less churn
on these variables.
Change-Id: I475ba9578a8bb421d7c342d2569d7de7fcf4161d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The old version was unnecessarily complex and allowed one region to
include the other.
Change-Id: Ibf7faf8103c8945b82c3962b5a7b82c3288b871f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30673
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Fixes getting a dump of GPIO registers for these devices.
Change-Id: I80f05a170152969ba45d6aee33ab7ed5296ee496
Signed-off-by: Shaleen Jain <shaleen@jain.sh>
Reviewed-on: https://review.coreboot.org/c/30604
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Based on IT8786E-I V0.4.1 datasheet with following remark:
"Please note that the IT8786E-I V0.4.1 is
applicable only to the D version."
Signed-off-by: Kyösti Mälkki <kyosti.malkki@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibf6e290abb01ae1b6b28173a83e88d1d99663ad4
Reviewed-on: https://review.coreboot.org/c/30334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Use the `git-format' tool to sanitise coreboot commits such that
they conform to coreboot's coding style.
This fancy piece of machinary allows one to have LibFormat from
Clang to automatically check your commit conforms to coreboot's
coding style, fix any issues automatically and provides you a
diff you may review and apply at your convenience.
N.B. When the `clang-format' binary is not found we issue a warning
that the test was skipped and carry on as usual. Hence, this is
strictly non-enforcing at this current time. You may use it at your
leisure.
Change-Id: If49017ea82f0707efd47cae5978a286a9af8f3b7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: https://review.coreboot.org/c/8037
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Update to latest version of iasl:
(From the acpica.org changelogs)
* Fixed a regression introduced in version 20180927 that could cause the
compiler to fault, especially with NamePaths containing one or more
carats (^). Such as: ^^_SB_PCI0
* Added a new remark for the Sleep() operator when the sleep time
operand is larger than one second. This is a very long time for the
ASL/BIOS code and may not be what was intended by the ASL writer.
* Implemented detection of extraneous/redundant uses of the Offset()
operator within a Field Unit list. A remark is now issued for these.
For example, the first two of the Offset() operators below are
extraneous. Because both the compiler and the interpreter track the
offsets automatically, these Offsets simply refer to the current
offset and are unnecessary. Note, when optimization is enabled, the
iASL compiler will in fact remove the redundant Offset operators and
will not emit any AML code for them.
Change-Id: I46a1b1be44328aa2172f4741e9fd0c9b0f4e0430
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/28944
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The existing code has several messages that are only printed when the
DEBUG variable is set. These messages are not verbose, and are quite
useful to see how the script is progressing. So, print them
unconditionally.
Change-Id: I8f78e4563f0b4a42f831194a6e526284c2fbcd92
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
crosfirmware.sh has dependencies that might not be installed on some
systems. If a dependency is missing, provide a clear message about the
issue and how to resolve it.
Change-Id: I265bd03666f1273d3c22b60aae860c48c758005b
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30549
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's quite useful to know the download progress, as it can take a while
even with a fast connection. For example, the peppy recovery image is
~600 MiB. It also lets the user know that disk space is being filled.
Change-Id: I8c175f9095478ffe33c95b7ef9907c25b5f10f8c
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30548
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On some systems, such as Debian 9.6, `parted` and `debugfs` are located
in /sbin. Adding /sbin to PATH means that this script can work when run
as a regular user.
Change-Id: I151dba467e2b196f13093334273dae8a05865491
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's the common name.
Change-Id: Iafa793b961847b2c98282fd035ea96ddf6109012
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30342
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
A release may be done from an older commit. It's also not a problem as
commits are stored in the reflog (unlike local changes that the script
guards properly).
Change-Id: I26f1c16c1cdfc9e77e28528b3327ce30c5b82b19
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
It's a separate package on debian, so it may not be installed with perl.
Change-Id: Id82661e1d7e6a025f5b207e3bd61669abc32d328
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Similar to i686 on x86_32, compile for nocona on x86_64.
Nocona is the first Pentium 4 CPU that has long mode support.
Required for 64bit support.
Change-Id: Ied28f98f89610a748be8d66cf35814e9112a4407
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/29877
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
They were not originally printed, and serve no good purpose, so let's
remove them again.
Change-Id: I4e00477f2e143f93fd27ba6a083977a667a3eb48
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/28829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Carl-Daniel made this script a long time ago but it never was picked up
in the tree. Now that USB debugging is way more common it makes
sense to include it.
I have made a number of changes to the original version:
* -h help text
* check for running as root
* enhanced readability (test -> if)
* new execution flow and refined output that better shows the device(s)
attached to the debug port(s)
* handling of Intel rate-matching hubs
* hiding of (bogus) error messages from lspci and lsusb
Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at>
Change-Id: Iadf775e990f5c5f91a28d57e3331d1f59acee305
Reviewed-on: https://review.coreboot.org/c/9305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add support for relocations on x86_64.
Required for 64bit romstage.
Change-Id: I1ff223d3476776297b501813a953356dd6fa9d67
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/30115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Add support for 64bit rmodule, as required for relocatable
ramstage on x86_64.
Change-Id: I7fbb3b4c0f76ce82c090b5f16f67a728b6bf94a5
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/29874
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In commit eceba31c7f ("util/lint: Set "acknowledgement" correct"), the
word "acknowledgement" was removed from util/lint/spelling.txt. A more
robust solution is to comment it out, as done for "sepc" in commit
afa5ec8d5f ("util/lint: Update spelling.txt to latest linux version").
Change-Id: Ia976dedc9b31190d22e7b946f14709d5c4577f71
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
util/util_readme/util_readme.sh is specifically a bash script and
requires bash-specific features such as "[[". It doesn't work when run
with a "sh" shell that only implements POSIX features, such as dash.
Thus, tell the user to run the script directly, in which case the #!
line is used.
Change-Id: I5706ffe857c5a148e9776571a377ad8647f9a4c2
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/30162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
94b761c8e (util/board_status: run dmesg with sudo) attempted to
fetch the console as root locally but instead sudo was put in front
of the remote path which runs as root anyways.
Also unless quotation marks are used the cmd function will see 'sudo'
and 'dmesg' as separate aruguments.
Change-Id: Ib9e9e4b443f4e3ad04c5fda2c2ce626255a190f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30264
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The gerrit docs aren't very explicit about it, but file:"^foo$" is more
robust than file:^foo$.
Change-Id: I16c7d972d365cd04ca5fbb78012ad4eaad667be6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29781
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=on Chromebook Kevin with 64bit userland, it works well.
Change-Id: If16065000214c6cff9c14a14c5b5f44faca38153
Signed-off-by: Adam Kallai <kadam@inf.u-szeged.hu>
Reviewed-on: https://review.coreboot.org/c/29978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
POWER8 is a specific implementation of ppc64, which is by now outdated
(POWER9 has been on the market for a while). Rename arch/power8/ to
potentially cover a wider range of hardware.
TEST=Toolchains built before/after this commit can build coreboot for
emulation/qemu-power8 from before/after this commit.
Change-Id: I2d6f08b12a9ffc8a652ddcd6f24ad85ecb33ca52
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/c/29943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
The reason for this code cleanup is the legacy
Google Purin board which isn't available anymore
and AFAIK never made it into the stores.
* Remove broadcom cygnus SoC support
* Remove /util/broadcom tool
* Remove Google Purin mainboard
* Remove MAINTAINERS entries
Change-Id: I148dd7eb0192d396cb69bc26c4062f88a764771a
Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29905
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The P2SB (PCI to Side-Band) bridge is on a different PCI device on APL.
Hence, we have to decide based on the LPC ID which device to query.
Also fix a comment.
Change-Id: Ie20d7d2d246629d085bcf4740ba28b1e81e6a12a
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/29896
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
On the updated builder image, the build is failing because the system
compiler has been updated to GCC 8.2.0. It complains about the
possibility of overflow when putting one 30 character buffer plus 2
characters into another 30 character buffer. To fix this, increase
the recipient buffer size by 2.
romcc.c:3645:2: note: 'sprintf' output between 3 and 32 bytes into a destination
of size 30 [-Werror=format-overflow=]
sprintf(buf, "\"%s\"", scratch);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
romcc.c:3649:2: note: 'sprintf' output between 3 and 32 bytes into a destination
of size 30 [-Werror=format-overflow=]
sprintf(buf, "\"%s\"", scratch);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: I7879a7202cc3ff52301b10118fc49fcc601f133e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/c/29850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
aligned_memcpy() was introduced to fix issues with platforms that don't
allow unaligned accesses to areas mapped with /dev/mem, but we missed a
few spots. Fix them.
Change-Id: I97ea953455b41a50023ceaca7eb148d60e6b8097
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/29848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
One common issue with the toolchain is that it takes a very long time
to build while it's somewhat volatile inside the coreboot tree.
Installing the toolchain elsewhere helps keep it safe but since there
is no reliable default location outside the tree, keep the default
as is.
Change-Id: Ic414cddfd3c7097412f3f2c3c7ec7b7191fa32de
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/29826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Field 'OEMID' & "OEM Table ID" are related to DSDT table
not to mainboard.
So use macro to set them respectvely to "COREv4" and
"COREBOOT".
Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: David Guckian
There is already a function with the name buffer_size(). Adding a local
variable with the same name will lead to the following error on older
GCC versions (e.g. version 4.4.7):
declaration of 'buffer_size' shadows a global declaration
To fix this rename the local variable to buffer_len.
Change-Id: Ifae3a17152f2f9852d29a4ac038f7e5a75a41614
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/29776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Header contains ':' in copyright line. rmdoule is a typo
Remove the ';' and correct typo to rmodule.
BUG=N/A
TEST=N/A
Change-Id: I05b1fb80a81682646c9fba3d234de235b6bc9e8c
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
The GPT version must be "00 00 01 00" and the little endian should be
represented as 0x10000.
Please refer to: https://en.wikipedia.org/wiki/GUID_Partition_Table
Change-Id: Ib025197fc96f32823e687a89de0cee51c952b031
Signed-off-by: Xiang Wang <wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/c/29767
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version.
This will cause the AML interpreter to use 32-bit integers and math
if the version is 1, and 64-bit if the version is >=2.
Current spec version is 2 for ACPI 6.2-a.
Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/29626
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The purpose of this tool is to manipulate and get information about the
`Back Up Control, Top Swap` mechanism present on most Intel Southbridges.
This tool is initially written by Peter Stuge.
This tool makes it possible to have a backup mechanism for the
bootblock by using the southbridges Back Up Control Top Swap.
Sometimes it is also possible to circumvent vendor write protection mechanisms
in order to flash coreboot. An example of where this would be useful would be
the Lenovo Thinkpad X60 and T60.
Change-Id: I12cc2e91396f096fc979e23848e1929cb6c44fc5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18224
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Newer kernels only allow root to access the kernel log buffer.
In another case (cbmem) we use sudo to get past that, so we can
expect sudo to be available here, too.
Change-Id: I654422992e5ba1e98a786f65d50289efbcd46602
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/29670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Python 3 is the default Python interpreter on most modern systems.
Python 2 scripts must specify they should be run with Python 2 in their
shebang. Solves issue raised in CB:28953.
Change-Id: I9ace4afd668539c05e7ace30e255af50c7a069c2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/29666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Some Unix systems (GuixSD, NixOS) do not install programs like
Bash and Python to /usr/bin, and /usr/bin/env has to be used to
locate these instead.
Change-Id: I7546bcb881c532adc984577ecb0ee2ec4f2efe00
Signed-off-by: Yegor Timoshenko <yegortimoshenko@riseup.net>
Reviewed-on: https://review.coreboot.org/28953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Sometimes it is necessary to be able to see exact command lines used
when compiling and linking. Use the same scheme as some other
Makefile's - enable verbose output when variable V is set to 1.
TEST=tried building cbfstool with V=1, observed verbose output.
Change-Id: Iff25439aabff79e69d1d94a2c51c60bb0e0d7b80
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/29431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add a test that, after cloning the repository to a temporary directory,
installs git hooks and attempts to do a good and a bad commit, expecting
the former to succeed and the latter to fail, thus testing the
`commit-msg` hook.
Change-Id: Icdaf0109c60cb5b6952b1a2468ab050a742e4201
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23281
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is so confusing, let's name it what it is ;)
Change-Id: I6f87e2f6912d886e241e03998fb4136fb28bc7b1
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Bind a volume for .ccache to the `docker-run-local` targets. By default
the current user's $(HOME)/.ccache will be used, it can be overridden
via the DOCKER_CCACHE variable.
Also rearrange some docker parameters to keep the target readable.
Change-Id: I7d0bdb3861ac56361cacfa74aaf8b45c4f135e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add an unprocessed flag (-U) which modifies how files are exported.
In the case of a compressed raw file, extract without decompressing.
In the case of a stage or payload, extract without decompressing or
converting to an ELF.
This can be useful for verifying the integrity of a stage or payload,
since converting to an ELF may not be a deterministic process on
different platforms or coreboot versions.
BUG=b:111577108
TEST=USE=cb_legacy_tianocore emerge-eve edk2 coreboot-utils chromeos-bootimage
cd /build/eve/firmware
/build/eve/usr/bin/cbfstool image.bin extract -r RW_LEGACY \
-n payload -f /tmp/payload_1 -U
START=$((16#`xxd -s 20 -l 4 -p tianocore.cbfs`))
SIZE=$((16#`xxd -s 8 -l 4 -p tianocore.cbfs`))
dd if=tianocore.cbfs skip=$START count=$SIZE bs=1 > /tmp/payload_2
diff /tmp/payload_1 /tmp/payload_2
rm /tmp/payload_1 /tmp/payload_2
Change-Id: I351d471d699daedd51adf4a860661877f25607e6
Signed-off-by: Joel Kitching <kitching@chromium.org>
Reviewed-on: https://review.coreboot.org/29616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Add a `docker-run-local` target that is used as a template for the
local build targets (`docker-build-coreboot`, `docker-abuild`, and
`docker-what-jenkins-does`).
Note this changes the user for `docker-what-jenkins-does` which has
(ccache) issues if it's not `root`. Will be fixed in a follow-up.
Change-Id: I9088fb9211726cddc37b17ddf70170c2c382679e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Pointer math with void pointers is illegal in many compilers, though it
works with GCC because it assumes size of void to be 1. Change the pointers
or add parenthesis to force a proper order that will not cause compile
errors if compiled with a different compiler, and more importantly, don't
have unsuspected side effects.
BUG=b:118484178
TEST=Build CBFS with original code, run objdump and saved output. Added
modifications, build cbfs again, run objdump again, compared objdump outputs.
Change-Id: I30187de8ea24adba41083f3bfbd24c0e363ee4b8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Add a `util/gitconfig/test` subdirectory which will contain tests to run
as executable files, add a helper script.
Add a timeout test that verifies that gitconfig completes in under two
seconds (typical run time is ~30 ms). Add gitconfig tests to the
`testing` Makefile under the `test-tools` target.
Change-Id: Id46f905b9f782e67be97a65d10045c3345dc996b
Signed-off-by: Alex Thiessen <alex.thiessen.de+coreboot@gmail.com>
Reviewed-on: https://review.coreboot.org/23280
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The gerrit reviewers plugin has a certain configuration format. Teach
maintainers to emit it when called with -print-gerrit-rules.
Change-Id: I92cfc905e0c1b03b7cf793a4324c392140a22060
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
First new option is -debug.
Change-Id: Ia6e9b3675449a0b1e6f5d7526ee999f925eaadb2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Help automated tools make sense of the output.
Instead of "[name 1 <email> name 2 <email>]", it now prints
"name 1 <email>, name 2 <email>". As long as there are no commas in the
maintainer names, they can be split easily.
Change-Id: I4a254f566404b081a08923bc7ceb49f02039aa2a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29604
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Instead of checking only for three cases, just use a glob parser (that
translates the glob to regex).
After that, maintainers src/arch/x86/memlayout.h emits:
src/arch/x86/memlayout.h is in subsystem X86 ARCHITECTURE
Maintainers: []
src/arch/x86/memlayout.h is in subsystem MEMLAYOUT
Maintainers: [Julius Werner <jwerner@chromium.org>]
The latter entry was invisible to the maintainers tool because its path
description wasn't in one of the supported formats.
Change-Id: I7e5cf4269415269552e35f2c73952ce3dff487e1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Without this change, the tool only reports the first hit. We want to see
all of them.
Change-Id: Ib59b13c50b61c48e3cb200bf57e28c9453590819
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Marshall Dawson