Enable Core Performance Boost feature in automatic mode.
Also enable C6 state which is a dependency for proper CPB operation.
CPB allows to raise single core frequency from 1000MHz to 1400MHz
during high load if other cores idle. The processor has additional
boosted P-states when CPB is enabled, but these are hidden from OS.
TEST: Higher single-core CPU performance is indicated by increased
memory bandwidth as reported by memtest86+.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5e080bfaee06fd13cedf5151d4a598ec212213f2
Reviewed-on: https://review.coreboot.org/c/31229
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are defined for __SIMPLE_DEVICE__ when PCI
enumeration has not happened yet. These should not
really try to probe devices other than those on bus 0.
It's hard to track but there maybe cases of southbridge
being located on bus 2 and available for configuration, so
I rather leave the code unchanged. Just move these out of
arch/io.h because they cause build failures if one attempts
to include <arch/pci_ops.h> before <arch/io.h>.
There are two direct copies for ROMCC bootblocks to
avoid inlining them elsewhere.
Change-Id: Ida2919a5d83fe5ea89284ffbd8ead382e4312524
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
With PCI_DEV() always defined it is no longer
necessary to exclude this code from building.
Change-Id: I58a6348750d240aa6024599f7b1af1449f31e8ac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31303
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Traditionally, we have always allocated 1 DRAM ID per part number.
However, on nami, we have run out of DRAM IDs because we have
supported so many different parts. We are now adopting the use of
generic SPD files that are feature-based rather than specific to each
part, allowing us to support multiple parts with a single SPD.
The common SPDs were created by taking current SPDs in Nami (which is
using the same DDR4 parts as Hatch) and zeroing out all the
manufacturer information and part names. Additionally, we zeroed out
bytes 128 (raw card extension, module nominal height), 129 (module
maximum thickness), and 130 (reference raw card used) after verifying
that they are not used in FSP. We verified with these fields zeroed
out, all nami devices could boot up without errors. We also verified
on the two Hatch skus that we have (4G 2400, 8G 2666) that the generic
SPDs boot properly.
BUG=b:122959294
BRANCH=None
TEST=Make sure that we can boot up on both 4G Samsung and 8G Hynix DDR4
devices that we currently have.
Change-Id: I14d9e6b13975b6a65b506e6cd475160711b8f6d4
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/31261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Instead of having SYSTEM_TYPE_DETACHABLE and SYSTEM_TYPE_TABLET use
PM_MOBILE have them use PM_TABLET instead.
Change-Id: If0ce51e522d36420ecd5b51bdfec6cca11c00333
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
df7aecd "cpu/intel: Configure IA32_FEATURE_CONTROL for alternative
SMRR" introduced a regression because it unconditionally writes to
IA32_FEATURE_CONTROL, which if it is already locked results in an
unhandled exception. The lock bit is already set on a system reboot.
Change-Id: I7d2df9e1b9d767809da7a61ccd877c6c40f132eb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31255
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Bill XIE <persmule@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Match devicetree what's present and in use.
Tested on wedge100s:
All PCI devices show up.
Change-Id: I669d059da1876ed669793db8c7eb1b96b481cb4c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/31228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Also includes lines sorted
Change-Id: Idf2b41f471f531b2a9c3e620563e3c658dea4729
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31267
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
"is_wakeup_source" flag is used to indicate if the concerned device can
trigger a wakeup. This flag is redundant with the "wake" GPE event
definition. So remove the redundant flag and use the "wake" GPE event to
mark the wakeup source.
BUG=None
BRANCH=None
TEST=Boot to ChromeOS. Ensure that the device is marked as wakeup-source
in SSDT if wake GPE is configured. Ensure that the system can suspend
and the device acts as a wakeup source
Change-Id: I99237323639df1cb72e3a81bcfed869900a2eefa
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/31258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
`git grep iterface` shows that these are the only two occurrences.
Change-Id: I838a60c95c5d0fc3dee902f0b72761dd60c36221
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/31286
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Change-Id: I9d57abcff9c2472cc58b7fbca00441cd38a7f1a1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Piotr Król <piotr.krol@3mdeb.com>
This change uses cnl_configure_pads to configure GPIOs in ramstage so
that cannonlake SoC code can re-configure the GPIOs after FSP-S is
run. This is just adding a workaround until FSP-S is fixed.
BUG=b:123721147
BRANCH=None
TEST=Verified that there are no TPM IRQ timeouts in boot log on hatch.
Change-Id: I9973c6c49154f1225f0ac34a3240a0d19f911f18
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
FSP-S is currently configuring GPIOs that it should not. This results
in issues where mainboard devices don't behave as expected e.g. host
unable to receive TPM interrupts as the pad for the interrupt is
re-configured as something else.
Until FSP-S is fixed, this change adds a workaround by reconfiguring
GPIOs after FSP-S is run.
All mainboards need to call cnl_configure_pads instead of
gpio_configure_pads so that SoC code can maintain a reference to the
GPIO table and use that to re-configure GPIOs after FSP-S is run.
BUG=b:123721147
BRANCH=None
TEST=Verified that there are no TPM IRQ timeouts in boot log on hatch.
Change-Id: I7787aa8f185f633627bcedc7f23504bf4a5250b4
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This patch performs below tasks
1. Create SOC_INTEL_COMMON_CANNONLAKE_BASE kconfig.
2. Allow required SoC to select this kconfig to extend CANNONLAKE
SoC support and add incremental changes.
3. Select correct SoC support for hatch, sarien, cflrvps
and whlrvp.
* Hatch is WHL SoC based board
* Sarien is WHL SoC based board
* CFLRVP U/8/11 are CFL SoC based board
* WHLRVP is based on WHL SoC
4. Add correct FSP blobs path for WHL SoC based designs.
Change-Id: I66b63361841f5a16615ddce4225c4f6182eabdb3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31133
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If a non aligned CONFIG_CBFS_SIZE is used the region RW_MRC_CACHE and
CONSOLE could end up non aligned. Currently this is only possible if
the user messes with CONFIG_CBFS_SIZE in menuconfig, but better be
safe than sorry.
Change-Id: Ieb7e3c7112bd4b3f9733c36af21b1d59b3836811
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30420
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Put the FMAP FMAP region right above the coreboot CBFS region.
The other regions like RW_MRC_CACHE and CONSOLE often have alignment
requirements so it makes sense to put those on top. This also
simplifies the code the generate the default fmap a little.
Change-Id: I24fa6c89ecf85fb9002c0357f14aa970ee51b1df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30419
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change enables I2C bus 2, 3 and 4 in devicetree and configures
GPIO pads for the same. It also configures pads for I2C5 as
no-connect.
BUG=b:123711244
TEST=Verified that i2c shows up in "i2cdetect -l" after booting to OS.
Change-Id: Ib4714a670d73228332115415e4393f82802c6475
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/31237
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Current coreboot size is not adequate for adding new features.
Note for cros: This change is for merge to ToT only and should not be
cherry-picked into reef's firmware branch.
BUG=chromium:903833
TEST=emerge-reef coreboot
Change-Id: Ie7a25c4638c474e81fb34b57de0dfc1bf393ea67
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add maximum width and height options and set the default to 2560x1600
(WQXGA). The framebuffer will be scaled up to the displays' native
resolutions. So this should help with tiny fonts on high-DPI displays.
For laptops, reasonable defaults can be set at the mainboard level.
Change-Id: I47fba063629260c3a2854caf7a73f1a1e933d063
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
We generate a $(obj)/cb-config.ads once and copy it per stage that uses
it to $(obj)/<stage>/cb-config.ads (to simplify the gnat-bind step). The
Ada package is called `CB.Config`. As there was no `CB` package yet, add
that too.
Change-Id: I963a6517ef4bcf84f2c8e9ae8d24a0d6b971d2b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/30584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
- improve descriptions of Purism and ChromeOS hardware
- add entry for Libretrend Librebox
- improve description of Mr Chromebox and John Lewis'
3rd party ChromeOS firmware offerings
Change-Id: I66bd1a3701091e499d88738a7c06126de66e58ff
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
This moves a lot of the common romstage boilerplate code to a common
location, while adding a few mainboard specific hooks.
Another difference is that the settings for enable_igd and enable_peg
are now based on the static devicetree settings.
Change-Id: I30ef7f6962aabde78b5c40e0b53bb85e01c254c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Some settings don't make sense like specifying input/output on native
ports or high/low on input ports.
Change-Id: Ib37837b9cdb8bb05e2523e0c43cc71fe4fbf243b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31187
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
his either sets unwanted or unnecessary settings.
Also this RCBA replay did not even originate from the T400 as this
code was copied from the Thinkpad x200 code on which this replay was
already removed in 7bcd062 'mb/lenovo/x200: Remove RCBA replay'
Change-Id: Iac6846d43395e342897e03c1ad31387638bcac64
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/31188
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
We already had such a page on the wiki, but it's outdated and the wiki
is supposed to go the way of the dodo anyway.
This is a fresh start to make sure that all ideas we're coming up with
are still current and that there are mentors willing to support them.
Change-Id: Idd68f845930bd37a2293969b9a153cf584d6d15f
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/30972
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures to select chromeos kconfig only for required
CFL-U and WHL-U RVPs supported by Intel client team.
TEST=Ensure CONFIG_GBB_FLAG_FORCE_MANUAL_RECOVERY is only selected
for CFL-U and WHL-U boards.
Change-Id: Ib61409402a948f8d5f91130e200c45320ea13d3d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/31214
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Get some content on the documentation site's front page.
Change-Id: I7f36234ef783e041a44590858bb75a69b96ee668
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Neither payloads nor distributors are an integral part of the coreboot
source tree, but they're very important parts of the coreboot
ecosystems, so add some descriptions.
Change-Id: Id64744c252b6b78c4811fbded48c441ef486ad94
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
It's what the doc.coreboot.org docker container is running and when
using its livehtml feature, it listens at localhost, which isn't always
desirable.
With `docker run -e SPHINXOPTS="-H $localip" ...` it now listens at
localip, which is more flexible.
Change-Id: Ia0614e57458c32169f6d614783366025e9c814b3
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/31128
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Select the appropriate system type for the different variants of
the Sarien board.
This will allow the Arcada variant to use the tablet mode feature
of the Intel Virtual Button driver.
Change-Id: I8a829aab012256ec196c8ec0fa298fd2bc77f2e1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add an ACPI device that is compatible with the Intel Virtual
Button kernel driver for reporting tablet mode state and various
virtual button events that may come from the EC.
This driver is used in Windows and in the Linux kernel at
drivers/platform/x86/intel-vbtn.c
Because of a check in the kernel driver it expects the board to
define the SMBIOS enclosure type as convertible for the check at
driver load time for tablet/laptop and dock/undock to work.
The virtual tablet mode button will proxy the tablet mode state
sent from the Sensor Hub to a SW_TABLET_MODE event in the kernel.
The virtual power button is used during S0ix for the EC to wake
the system with an SCI. There are separate press and release
events which are sent for completeness, although the kernel driver
will ignore the release event.
BUG=b:73137291
TEST=Test that the power button can wake the system from S0ix.
Also verify that the device is reported as laptop mode at boot.
Change-Id: I0d5dc985a3cfb1d01ff164c4e67f17e6b1cdd619
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31208
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These are more common system types and in some cases it is important
to know when a device is a convertible or a tablet or detachable
instead of just a laptop.
This change will select the appropriate SMBIOS enclosure type based
on the selected system type.
This is important for the Intel Virtual Button driver as it does a
check on the SMBIOS enclosure type and only enables the tablet mode
events if it is set to convertible:
https://patchwork.kernel.org/patch/10236253/
Change-Id: I148ec2329a1dd38ad55c60ba277a514c66376fcc
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/31206
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
After CL:31122, we can finally define a memory type specific for BL31,
to make sure BL31 is not loaded on other reserved area.
Change-Id: Idbd9a7fe4b12af23de1519892936d8d88a000e2c
Signed-off-by: Ting Shen <phoenixshen@google.com>
Reviewed-on: https://review.coreboot.org/c/31123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
The ACPI spec has an asl example for _PLD in the form:
Name (_PLD, Package (0x01) { ToPLD (PLD_Revision = 0x2) })
When I ported this to acpigen and diffed the results I noticed that
the binary blob was no longer provided within a package. The ACPI
spec (section 6.1.8 in version 6.2) defines _PLD as "a variable-length
Package containing a list of Buffers". This commit changes
acpigen_write_pld to use a package (the one existing caller I found
isn't wrapping the result in a package so it doesn't look like
it was intended for the callers of acpigen_write_pld to be responsible
for using a package.
BUG=none
BRANCH=none
TEST=Verified that after this change a package is use and the result
of acpigen matches what was used in the original asl.
Change-Id: Ie2db63c976100109bfe976553e52565fb2d2d9df
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
If an acpi_dp table has children but no properties then acpi_dp_write()
will write out a properties UUID and package that contains no properties.
The existing function will avoid writing out a UUID and empty package
when no children exist, but it seems to assume that properties will
always be used. With this change properties are handled in a manner
akin to children so that a UUID and package are only written if
properties exist.
BUG=none
BRANCH=none
TEST=Confirmed that prior to this change a UUID and empty package was
present for a device that had children but no properties. Verified that
after this change the UUID and empty package are no longer present but
the child UUID and package are still present.
Change-Id: I6f5597713a1e91ca26b409f36b3ff9eb90a010af
Signed-off-by: Matt Delco <delco@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The allocation is not required before romstage,
so it can be just another CAR_GLOBAL instead of
polluting the linker script.
Change-Id: I0738a655f6cc924fbed92ea630f85406e3f58c0b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31191
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Michał Żygowski