Commit Graph

164 Commits

Author SHA1 Message Date
Clark Rawlins 46fc14dcc8 With this small change it is possible to build flashrom again when
specifying custom CFLAGS/LDFLAGS from the make command line like:

  make CFLAGS="..." LDFLAGS="..."

I need to do this when building flashrom in a cross compiler environment
like buildroot for a foreign target.

Signed-off-by: Clark Rawlins <clark@bit63.org>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3102 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-14 23:22:20 +00:00
Mart Raudsepp 9792a034e4 flashrom: further cleanups to enable_flash_cs5536
- Remove the "enable write to flash" message, as the caller appears to
   already report that.

 - Move the 'modprobe msr' suggestions to the first lseek64 error handling, as
   we get an error there already.

 - Rename a perror string from "read" to "read msr", as we use the latter
   already in this function for another read.

Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3101 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-11 14:32:45 +00:00
Luc Verhaegen 2f7b7fb82a Flashrom: Add board enable for VIA EPIA SP.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3099 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-09 02:03:06 +00:00
Mart Raudsepp 2995cc69f7 Improve error handling and make RCONF_DEFAULT_MSR address be a constant.
Also, move a big code comment to the top of enable_flash_cs5536().

Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3098 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-08 10:10:57 +00:00
Mart Raudsepp 99062ae5ad This implements support for devices using AMD Geode companion chip
CS5536 that have the Boot ROM on NOR flash that is directly connected to
FLASH_CS3 (Boot Flash Chip Select).
We need to write enable it in the NORF_CTL MSR register for flashrom to
be able to write to it, including JEDEC probe commands.

This patch allows us to stop using AMD gx_utils.ko for BIOS flashing on
the DBE61.

Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3097 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-08 09:59:58 +00:00
Carl-Daniel Hailfinger c23b3a5732 Handle JEDEC JEP106W continuation codes in SPI RDID. Some vendors like
Programmable Micro Corp (PMC) need this.
Both the serial and parallel flash JEDEC detection routines would
benefit from a parity/sanity check of the vendor ID. Will do this later.

Add support for the PMC Pm25LV family of SPI flash chips.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Chris Lingard  <chris@stockwith.co.uk>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3091 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-02-06 22:07:58 +00:00
Peter Stuge e2bbcb10d1 Make the vendor name optional in the -m flashrom parameter when there's only
one board name that matches. The full syntax still works, and is required
when two vendors have boards with the same names.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3082 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-27 16:21:21 +00:00
Peter Stuge 2d94dead69 Forgot to add Spansion S25FL016A to README, trivial.
Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3080 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-27 07:17:14 +00:00
Marc Jones 2db9464299 Correctly disable the ROM area Write Protect bit in the Geode LX.
Signed-off-by: Marc Jones <marc.jones@amd.com>
Acked-by: Peter Stuge <peter@stuge.se>

Tested on the pcengines alix1c and works fine.
Acked-by: Ronald G. Minnich <rminnich@gmail.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3078 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-26 07:35:47 +00:00
Peter Stuge f2a2a5ee2e Add ids and chip entry for Spansion S25FL016A to flashrom, tested,
working.

Signed-off-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-25 01:52:45 +00:00
Harald Gutmann bb9c1aa54e Here is just a little and simple patch to get the MX25L3205D working.
I've tested and verified the chip myself, and it seems to work
everything like supposted, since Carl-Daniel has patched flashrom to
use the read funktion on verifying. 

"benchvice flashrom # ./flashrom -m gigabyte:m57sli -v test.4mb
Calibrating delay loop... OK.
No coreboot table found.
Found chipset "NVIDIA MCP55", enabling flash write... OK.
Found board "GIGABYTE GA-M57SLI-S4": enabling flash write... 
Serial flash segment 0xfffe0000-0xffffffff enabled
Serial flash segment 0x000e0000-0x000fffff enabled
Serial flash segment 0xffee0000-0xffefffff disabled
Serial flash segment 0xfff80000-0xfffeffff enabled
LPC write to serial flash enabled
serial flash pin 29
OK.
MX25L3205 found at physical address 0xffc00000.
Flash part is MX25L3205 (4096 KB).
Flash image seems to be a legacy BIOS. Disabling checks.
Verifying flash... VERIFIED.
benchvice flashrom # ls -l test.4mb
-rw-r--r-- 1 root root 4194304 22. Jan 16:27 test.4mb

Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3072 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-22 16:03:19 +00:00
Carl-Daniel Hailfinger a6941beb43 Flashrom did not use the read function for verifying, it used direct memory
access instead. That fails if the flash chip is not mapped completely.
If the read function is set in struct flashchip, use it for verification
as well.

This fixes verification of all SPI flash chips >512 kByte behind an
IT8716F flash translation chip.

"MX25L8005 found at physical address 0xfff00000.
Flash part is MX25L8005 (1024 KB).
Flash image seems to be a legacy BIOS. Disabling checks.
Verifying flash... VERIFIED."

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Harald Gutmann <harald.gutmann@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3070 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-22 15:19:01 +00:00
Carl-Daniel Hailfinger 468413a337 Make sure we delay writing the next byte long enough in SPI byte
programming.
Minor formatting changes.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Harald Gutmann <harald.gutmann@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3069 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-22 14:37:31 +00:00
Ronald Hoogenboom 21efd9ffe2 Omitting the wait for SPI ready when there is no data to be read, e.g.
readcnt==0 saves 10 seconds with the unconditional 10us delay, reducing
programming time for SST25VF016B to 40-45 secs.

Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3068 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-21 23:55:08 +00:00
Bernhard Walle 679c62c083 This patch adds version information to flashrom. Because 'v' and 'V'
are already in use, the patch uses 'R' (for release) and, of course,
'--version'.

Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de>
Acked-by: Ulf Jordan <jordan@chalmers.se>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3067 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-21 15:24:22 +00:00
Ronald Hoogenboom 2f0f561f89 Support SPI flash chips bigger than 512 kByte sitting behind IT8716F
Super I/O performing LPC-to-SPI flash translation.

Signed-off-by: Ronald Hoogenboom <hoogenboom30@zonnet.nl>
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3061 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-19 00:04:46 +00:00
Uwe Hermann d84d9ba445 Minor documentation improvements/fixes in the README and manpage (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3059 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18 17:48:51 +00:00
Stefan Reinauer 7223ab7c4a rename linuxbios_* files in utils repository.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3058 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18 16:17:44 +00:00
Stefan Reinauer 8df401db3b for some reasons the externals did not get committed.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3054 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-18 15:33:10 +00:00
Bernhard Walle 6322baa50c This patch removes '\n' from the help output since this looks a bit strange.
After the patch [...] The line length is still below 80 characters.

Signed-off-by: Bernhard Walle <bernhard.walle@gmx.de>
Acked-by: Torsten Duwe <duwe@lst.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3045 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-11 00:32:07 +00:00
Harald Gutmann 2e152be16e Enable MX25L8005 support in flashrom. The #defines were already there.
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3042 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-10 13:27:22 +00:00
Carl-Daniel Hailfinger c7323f1b0c Add support for the SST25VF040B 4 Mbit SPI flash chip.
Straight from the data sheet, not tested.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3036 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-07 13:48:51 +00:00
Ronald G. Minnich 11e90e06d3 Add board enable for the gigabyte ga_2761gxdk board
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3033 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-04 17:22:44 +00:00
Carl-Daniel Hailfinger b5f9bd6ac9 Print at least the vendor for SPI flash chips if the exact chip ID is
unknown.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3032 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2008-01-04 16:22:09 +00:00
Carl-Daniel Hailfinger 717f66d1eb Unfortunately, EN29F002T, EN29F002AT, EN29F002ANT, EN29F002NT all have
exactly the same ID. Improve model number printing.

Add EN29F002(A)(N)B support while I'm at it.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Markus Boas <bios@ryven.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3031 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-31 14:05:08 +00:00
Carl-Daniel Hailfinger 85acc09786 Add continuation ID support to jedec.c
The continuation ID code does not go further than checking for IDs of
the type 0x7fXX, but does this for vendor and product ID. The current
published JEDEC spec has a list where the largest vendor ID is 7 bytes
long, but all leading bytes are 0x7f. The list will grow in the future,
and using a 64bit variable will not be enough anymore.
Besides that, it seems that the location of the ID byte after the first
continuation ID byte is very vendor specific, so we may have to revisit
that code some time in the future.

(Suggestion for a new encoding:
Use a two-byte data type for the ID, the lower byte contains the only
non-0x7f byte, the upper byte contains the number of 0x7f bytes used as
prefix, which is the bank number minus 1 the vendor ID appears in.)

Add support for EON EN29F002AT.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3030 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-31 01:49:00 +00:00
Carl-Daniel Hailfinger 1704179acd This fixes a few vendor IDs to conform with JEDEC publication 106W
(JEP106W), adds some device IDs and provides information about
non-conforming IDs.
The EON change is left to the patch adding EON chips.

This patch should have no effect on code generation.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3029 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-31 01:18:26 +00:00
Carl-Daniel Hailfinger 19cf6a3890 All SPI chips mentioned in flashchips.c had their sector size listed as
page size. Fix that. Page size is uniform 256 bytes for SPI.

A sector/block size field in struct flashchip would be nice, though.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3027 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-29 11:05:59 +00:00
Carl-Daniel Hailfinger 29df7a9662 Print the chip status register for all SPI chips on probe if verbose
output is specified.
Pretty-print the chip status register (including block lock information)
for ST M25P family and Macronix MX25L family chips.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3026 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-29 10:15:58 +00:00
Carl-Daniel Hailfinger d0ad60a795 Add 25VF016B support to flashrom. Untested, but verified against the
data sheet.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3025 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-29 10:14:38 +00:00
Carl-Daniel Hailfinger 244dd82fd6 Add support for ST M25P05-A, M25P10-A, M25P20, M25P40, M25P16, M25P32,
M25P64, M25P128 to flashrom. ST M25P80 support is already there.
Not tested, but conforming to data sheets and double checked.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3012 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-17 22:22:40 +00:00
Carl-Daniel Hailfinger 12a3f1edec To make it easier to add new SPI chips to flashchips.c, rename functions
with multiple possible opcodes from linear numbering at the end (_1, _2)
to include the opcode at the end (_60, _c7). That way, you only have to
take a short look at the data sheet and choose the right function by
appending the opcode listed in the data sheet.
No functional changes.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Ward Vandewege <ward@gnu.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3009 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-17 14:33:32 +00:00
Carl-Daniel Hailfinger 3b408fd237 Add support for ST M25P80 chips to flashrom. Detection was tested.
Print status register before erase to help debugging block locks.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Corey Osgood <corey.osgood@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3008 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-16 21:15:27 +00:00
Frederico Silva 850c01cacf Add support for more atmel chips:
AT49F002
AT49F002N
AT49F002T
AT49F002NT

Only tested the read function on AT49F002T.
datasheet @ http://www.atmel.com/atmel/acrobat/doc1017.pdf

Signed-off-by: Frederico Silva <frederico.silva@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3003 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-10 16:57:59 +00:00
Uwe Hermann 186a3875dc Various coding style fixes, constification, fixed typos (trivial).
Also, s/0xFF80/0xFFC0/ in the Acorp 6A815EPD board-enable, as per
http://www.linuxbios.org/pipermail/linuxbios/2007-December/027750.html

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2997 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-04 21:49:06 +00:00
Jonathan A. Kollasch d795b9a9ec Add board-enable for Acorp 6A815EPD.
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2995 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-12-02 19:03:23 +00:00
Lane Brooks 9fe02e8c65 [LinuxBIOS] flashrom support for AMD Geode CS5536
Attached is a patch that enables AMD Geode CS5536 chipset support.  I
have tested it successfully on a MSM800 board from digital logic.

Signed-off-by: Lane Brooks <lbrooks@mit.edu>
Acked-by: Jordan Crouse <jordan.crouse@amd.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2967 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13 16:45:22 +00:00
Carl-Daniel Hailfinger 6d6146c377 Fix ATMEL 29C020 detection with flashrom. The JEDEC probe routine had
a delay of 10 us after entering ID mode and this was insufficient for
the 29C020. The data sheet claims we have to wait 10 ms, but tests have
shown that 20 us suffice. Allow for variations in chip delays with a
factor of 2 safety margin.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2962 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-11-13 14:56:54 +00:00
Uwe Hermann 825c809efe Add support for Intel 440MX systems.
Add support for the Fujitsu MBM29F400TC flash part.

Detection and reading works, writing is not tested.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2903 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-30 00:56:50 +00:00
Peter Lemenkov 5384dac57e Added Am29LV040B
Looking through the sources of Uniflash utility I found that this chip
is no more no less than low-voltage variant of Am29F040B but with
different ID.

So I created a very quick patch (attached).

Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2897 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-25 04:11:11 +00:00
Peter Lemenkov 2ef39274a3 Flashrom: Add more Vendor IDs and ensure correct sorting in flash.h.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2884 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22 20:36:16 +00:00
Carl-Daniel Hailfinger c4a0b911d1 Introduce block and sector erase routines to flashrom, but do not use
them yet.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2881 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-22 16:15:28 +00:00
Carl-Daniel Hailfinger bd7602314b Remove hardcoded wait from SPI write/erase routines and check the chip
status register instead.
This has been tested by Harald Gutmann <harald.gutmann@gmx.net> with a
MX25L4005 chip.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2876 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-18 17:56:42 +00:00
Uwe Hermann 69a392b5c6 Documentation fixes and updates (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2875 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-18 00:29:05 +00:00
Carl-Daniel Hailfinger 79aa01a6c3 Add generic SPI flash erase and write support to flashrom. The first
chip the code was tested and verified with is the Macronix MX25L4005,
but other chips should work as well.
Timeouts are still hardcoded to data sheet maxima, but the status
register checking code is already there.
Thanks to Harald Gutmann for the initial code on which this is loosely
based.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2874 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-18 00:24:07 +00:00
Uwe Hermann dcb9abdf4c Some cosmetic cleanups in the flashrom code and output.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2873 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17 23:55:15 +00:00
Carl-Daniel Hailfinger 84453c02f7 Fix wrong values/typos in chipset_enable.c. This has been confirmed by
Ed Swierk in
http://www.mail-archive.com/linuxbios@linuxbios.org/msg09788.html .

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2868 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-17 22:30:07 +00:00
Uwe Hermann f8dabccdbf Multiple flashrom fixes:
- Install binary in /usr/sbin (not /usr/bin), as it's a root-only tool.

 - Rename manpage from flashrom.1 to flashrom.8, as section 8 contains
   "System administration commands (usually only for root)".

 - Actually install the manpage upon 'make install'.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2866 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16 23:36:34 +00:00
Michael van der Kolff e62537a948 Add Gigabyte M61P-S3 SPI flash support to board_enable.c
Signed-off-by: Michael van der Kolff <mvanderkolff@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2864 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16 21:18:43 +00:00
Carl-Daniel Hailfinger 259aaf00f5 Convert the existing it8716f_* functions to generic_spi_* functions by
applying abstraction and wrapping.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2863 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2007-10-16 21:09:06 +00:00