Commit Graph

58 Commits

Author SHA1 Message Date
Patrick Rudolph 5271776689 Documentation: Add lemp9 to toctree
Fix "WARNING: document isn't included in any toctree" by adding
the lemp9 to mainboard/index.md.

Change-Id: Id6d8f9e2aab6dc7ad4baf1b37d88e531acb757f4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-25 16:10:15 +00:00
Matthew Garrett 2f62a352ea mb/51nb: Add support for the 51nb X210
The 51nb X210 is a replacement motherboard for Thinkpad X200/X201 systems,
based on a modern Kabylake CPU. It also ships with no firmware protection,
(IFD is fully unlocked, no protected regions are set, no Bootguard),
making it an ideal coreboot target. This port is based on the support for
the Skylake-based Purism Librem 13v3, with the following significant
changes:

* EC firmware is contained within the system SPI flash, and so a blob of
  EC firmware must be injected to a defined location during image build.
* GPIO layout is different - this is currently just a raw import of the
  GPIO configuration from the vendor firmware
* The system has two DIMMs, so an additional SPD address has been added
* The USB port layout is different
* The EC must be enabled at boot time through SuperIO-style logical device
  configuration
* EC register layout is different, necessitating changes in the ACPI tables
* The HDA pins are different
* The genx_dec config is different

All hardware appears to work as expected, although the SD reader is
untested.

Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If74621e76d703f629b54f1feb1acfc95cc72d183
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-16 14:42:04 +00:00
Angel Pons 31b7ee4201 treewide: Replace uses of "Nehalem"
The code in coreboot is actually for the Arrandale processors, which
are a MCM (Multi-Chip Module) with two different dies:

- Hillel:   32nm Westmere dual-core CPU
- Ironlake: 45nm northbridge with integrated graphics

This has nothing to do with the older, single-die Nehalem processors.
Therefore, replace the references to Nehalem with the correct names.

Change-Id: I8c10a2618c519d2411211b9b8f66d24f0018f908
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38942
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-15 13:04:39 +00:00
Michał Żygowski b9f9f6c12b mb/libretrend/lt1000: Add Libretrend LT1000 mainboard
Change-Id: I32fc8a7d3177ba379d04ad8b87adefcfca2b0fab
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30360
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-10 10:04:05 +00:00
Michał Żygowski 48be6b276a mb/protectli/vault_kbl: Add FW6 support
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I03e8e8db5d827fe113280f2a6376d364edf42870
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-10 10:03:17 +00:00
Michał Żygowski 83565dea86 mb/protectli/vault: Add FW2B and FW4B Braswell based boards support
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I553fd3a89299314a855f055014ca7645100e12e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-03-09 21:26:20 +00:00
Evgeny Zinoviev ef613b97cf Documentation: Add Montevina ThinkPads common page
- Add a common page about Montevina ThinkPads.
- Describe how to disable ME and remove its firmware on these models.
- Describe vendor flash layouts.

Thanks to swiftgeek for his help when writing this, especially the last
paragraph and flash layouts.

Change-Id: I85917821efe63fff4b933b6226e99c17b63eb1b9
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-09 08:10:36 +00:00
Evgeny Zinoviev b3a247ccca Documentation: mb/lenovo: Make X1 uppercase
x1 -> X1.

Change-Id: Iab28e979102a6f98c41706ac0f483770466385dc
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-17 20:22:54 +00:00
Patrick Rudolph f9e10f26ba Documentation: Remove confusing xyz0 naming convention for Lenovo devices
Replace xx30 with Ivy_Bridge and xx20 with Sandy_Bridge.
Also add a note that the Ivy_Bridge tutorial doesn't covert T430s and T431s.

Change-Id: I0b65bca83195ec22cc139130e7cb6183c0972484
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-02-17 20:12:22 +00:00
Evgeny Zinoviev d498e52c3f Documentation: xx30 ThinkPads internal flashing
Add detailed instructions on how to unlock protected SPI ranges and
flash coreboot internally on Lenovo ThinkPad Ivy Bridge series by
exploiting stock BIOS security issues.

Change-Id: I8d8551910c31fd2e6ff728e17dafaea45970166b
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-05 09:57:26 +00:00
Felix Held 8b3380044d Documentation: link asus p5q on mainboard page
Change-Id: Ia3f58cc15897bff87dd699ab1fb1c42545119f0b
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-01-23 16:38:39 +00:00
Patrick Rudolph 9e877ec60d util/supermicro: Add and use new tool smcbiosinfo
The BMC and tools interacting with it depend on metadata placed inside
the ROM in order the flash the BIOS.

Add a new tool smcbiosinfo, integrate it into the build system, and
generate a 128byte metadata file called smcbiosinfo.bin on build.

You need to provide the BoardID for every SMC mainboard through a new
Kconfig symbol: SUPERMICRO_BOARDID

Some fields are unknown, but it's sufficient to flash it using SMC
vendor tools.

Tested on Supermicro X11SSH:
* Flashing using the WebUI works
* Flashing using SMCIPMITool works

No further validation is done on the firmware.

Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-01-06 10:56:09 +00:00
Wim Vervoorn 7c04acff8a mb/facebook/monolith: Add Facebook Monolith
The board is booting Linux and has been briefly tested.

SeaBIOS, TianoCore payload and Linux as payload all seem to work fine.

BUG=N/A
TEST=tested on Facebook Monolith

Change-Id: I65a2e03334af65cfb3f825d43fa0daa6e6c75913
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-06 15:15:08 +00:00
Patrick Rudolph 0209f3dd15 Documentation: Remove duplicated entry
The mainboard was accidently added due to bad rebase.

Change-Id: Ie7215e551651dbbc8d92316c48e455405923a30b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36077
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-19 13:47:07 +00:00
Iru Cai b559432604 mainboard: Add Lenovo ThinkPad T440p
The code is based on autoport.

This port is tested on a T440p without a dGPU and can boot Arch Linux
from SATA disk with SeaBIOS payload. The tested components and issues
are in the documentation.

Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-30 08:21:13 +00:00
Maccraft 0cd098e4e4 mb/lenovo/{t60,r60}: Add ThinkPad R60 support as variant board
- This port should be Reclaim Your Freedom compliant
  (not certified yet).
- Untested on boards with external Radeon graphics adapter.
- Some columns on the left-most side of display are completely
  black on 1400x1050 IPS display[1]. Display works fine on Linux.
  I don't know why it appears like that. So far it has been observed
  only with native graphics initialization.
- Only GRUB2 and SeaBIOS payloads tested for now.
- 2504 docking station USB doesn't work under Linux.
  Can detect pendrive in GRUB2 payload.
- Sometimes it takes 20s of "pretending it's powered off" to run
  coreboot code. Issue is payload agnostic.
  Probably caused by missing one capacitor on my unit.

[1] https://imgur.com/a/0wpMGsm

Change-Id: Ibd9208a5eafd228f8eedbc8fb4f4eb9ed1932a14
Signed-off-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35864
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-25 20:07:16 +00:00
Bill XIE 96ae7a3a2d mb/lenovo/x200: Add ThinkPad X301 as a variant
It is similar to X200s, with U-series CPU, slightly different gpio
setup, no docking support, and no superio chip.

Tested:
    - CPU Core 2 Duo U9400
    - Slotted DIMM 4GiB*2 from samsung
    - Camera
    - pci-e slots
    - sata and usb2
    - libgfxinit-based graphic init
    - NVRAM options for North and South bridges
    - Sound
    - Thinkpad EC
    - S3
    - Linux 4.19.67-2 within Debian GNU/Linux stable, loaded from
      Linux payload (Heads) and Seabios.

TODO: repurpose and/or rename flag H8_DOCK_EARLY_INIT (introduced in
      CB:4294 ) for h8-using devices without a dock.

Change-Id: Ic6a6059ccf15dd2e43ed4fc490c1d3c36aa1e817
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-20 09:49:44 +00:00
Nicolas Reinecke b165c4a46f mainboard/lenovo/t410: Add new port
The port is based on the x201 / t410s.
2537-vg5 / i5, no discrete gpu

Tested and working:
* Native raminit
* Native gfxinit
* Booting Seabios 1.12.1
* Booting from EHCI
* Running GNU/Linux 5.0.0
* No errors in dmesg
* EHCI debug on the devices left side, bottom-right
* Keyboard
* Fn keys (Mute, Volume, Mic)
* Touchpad
* TPM
* Wifi
* Sound
* USB
* Ethernet
* S3 resume
* VBOOT

Testing in progress.

Untested:
* VGA
* Displayport
* Docking station

Bugs:
* AC adapter can't be read from ACPI
* TPM not working with VBOOT and C_ENV BB

Details for flashing externally:
1. Disconnect all power
2. Connect the external flasher
3. Connect the power cord (This fixes internal power control)
4. Remove the power cord

Change-Id: Id9d872e643dd242e925bfb46d18076e6ad100995
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/11791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-10-15 06:47:48 +00:00
Patrick Georgi 0df412d8cc Documentation/mb: Link AMD mainboards directly in the big list
Fixes an issue with amd/index.md not being part of a toctree

Change-Id: Id419695d24a49951afb844c81cc0951d6920e0d2
Signed-off-by: Patrick Georgi <patrick@georgi.software>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-10-07 01:08:26 +00:00
Michael Niewöhner 258f52b520 mb/supermicro/x11-lga1151-series: rework documentation
This splits the x11-lga1151-series' documentation into a generic and a
board specific section as a preparation for CB:35427.

Additionally this adds some more information on the x11ssh board.

Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I40ddd0b5cce0b1a3306eae22fc0a0bc6b2a6263c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-10-04 16:24:59 +00:00
Michael Niewöhner 0a6c62fbbe mb/supermicro: restructure x11ssh-tf to represent a x11 board series
Most of the X11 boards with socket LGA1151 are basically the same boards
with just some minor differences like different NICs (1 GbE, 10 GbE),
number of NICs / PCIe ports etc.

There are about 20 boards that can be added, if there is a community for
testing.

To be able to add more x11 boards easily like x11ssm (see CB:35427) this
restructures the x11ssh tree to represent a "X11 LGA1151 series". There
were multiple suggestions for the structure like grouping by series
(x10, x11, x...), grouping by chipset or by cpu family.

It turned out that there are some "X11 series" boards that are
completely different. Grouping by chipset or cpu family suffers from the
same problem. This is why finally we agreed on grouping by series and
socket ("X11 LGA1151 series").

The structure uses the common baseboard scheme, while there is no "real"
baseboard we know of. By checking images, comparing logs etc. we came to
the conclusion that Supermicro does have some base layout which is only
modified a bit for the different boards.

X11SSH-TF was moved to the variants/ folder with it's gpio.h. As we
expect the other boards to have mostly the same device tree, there is a
common devicetree that gets overridden by each variant's overridetree.

Besides that some very minor modifications happened (formatting, fixing
comments, ...) but not much.

Documentation is reworked in CB:35547

Change-Id: I8dc4240ae042760a845e890b923ad40478bb8e29
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35426
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-26 09:29:25 +00:00
Nico Huber 7f7ab8f16c Documentation/mainboard: Fix index
Remove duplicate headings, move vendor sections that were placed
amidst other vendor hierarchies, and while we are at it, sort it
alphabetically.

Change-Id: I1f684deac3bbf98e8584089be05daf1c73e74a2d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35462
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-20 07:16:15 +00:00
Christian Walter 08aa502d79 mb/supermicro/x11ssh: Add Supermicro X11SSH-TF
Add support for the X11SSH-TF which is based on Intel KBL.

Working:
* SeaBIOS payload
* LinuxBoot payload
* IPMI of BMC
* PCIe, SATA, USB and M.2 ports
* RS232 serial
* Native graphics init

Not working:
* TianoCore doesn't work yet as the Aspeed NGI is text mode only.
* Intel SGX, due to random crashes in soc/intel/common

For more details have a look at the documentation.

Please apply those patches as well for good user experience:

Ica0c20255f661dd61edc3a7d15646b7447c4658e

Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-09-01 22:18:38 +00:00
Asami Doi f795242f26 mainboard/emulation/qemu-aarch64: Add new board for ARMv8
This CL adds a new board, QEMU/AArch64, for ARMv8. The machine supported
is virt which is a QEMU 2.8 ARM virtual machine. The default CPU of
qemu-system-aarch64 is Cortex-a15, so you need to specify a 64-bit cpu
via a flag.

To execute:
$ qemu-system-aarch64 -M virt,secure=on,virtualization=on \
  -cpu cortex-a53 -bios build/coreboot.rom -m 8192M -nographic

Change-Id: Id7c0831b1ecf08785b4ec8139d809bad9b3e1eec
Signed-off-by: Asami Doi <d0iasm.pub@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-08 01:12:06 +00:00
Frans Hendriks ed52e3dd9c mainboard/portwell/m107: Do initial mainboard commit
Initial support for Portwell PQ7-M107 (Q7) module.
Code based on Intel Strago mainboard.

BUG=N/A
TEST=booting SeaBIOS and Linux 4.20 kernel on PQ7-M107

Change-Id: I7d3173fdcf881f894a75cd9798ba173b425d4e62
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29470
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2019-07-17 14:21:52 +00:00
Vlado Cibic 2bf6a301d3 mainboard: Add support for ASUS P8Z77-M PRO desktop mainboard
Add support for ASUS P8Z77-M PRO desktop mainboard

Working:

- Tianocore and SeaBIOS boot
- PS/2 keyboard and mouse
- Audio
- S3 Suspend, shutdown and reboot
- USB2 / USB3
- Gigabit Ethernet
- SATA3, SATA2 and eSATA
- NVME
- CPU Temp sensors
- TPM
- Native raminit and also MRC
- PCIe GPU in all PCIe slots (16x/8x/4x) (linux)
- Integrated graphics with both libgfxinit and Intel Video OpROM
  (all connectors VGA/DVI-D/HDMI)

Signed-off-by: Vlado Cibic <vladocb@protonmail.com>
Change-Id: I47d24ac8b236f929c3160f9a769b971d83710f9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33328
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-27 16:17:04 +00:00
Piotr Kleinschmidt 2d6ed31cbd Documentation: Add PC Engines apu2
Describe how to run coreboot on the PC Engines apu2 mainboard.

Change-Id: Id1d553c7f7485358960d92e714d50ba0f75b3581
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-24 12:29:52 +00:00
Piotr Kleinschmidt fd666ed0b5 Documentation: Add PC Engines apu1
Describe how to run coreboot on the PC Engines apu1 mainboard.

Change-Id: If79693e893c4afe52bf1c9aa8017ac6f650a96e4
Signed-off-by: Piotr Kleinschmidt <piotr.kleinschmidt@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-06-24 12:28:52 +00:00
Patrick Rudolph 05284b64d0 mb/hp: Add Z220 SFF workstation
* Add initial board commit based on HP8200 SFF.
* Add documentation.
* Serial and PCIe slot are working.

Tested on HP Z220.

Change-Id: I75987a7ea9a008a64281f0d5ab27e5148d36a4ec
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33207
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06 12:13:19 +00:00
Frans Hendriks 43b6e2ed71 mainboard/facebook/fbg1701: Do initial mainboard commit
Initial support for Facebook FBG-1701 system.
coreboot implementation based on Intel Strago mainboard.

Configure 'Onboard memory manufacturer' which must match HW.

BUG=N/A
TEST=booting SeaBIOS and Linux 4.15+ kernel on Facebook FBG-1701

Change-Id: I28ac78a630ee705b1e546031f024bfe7f952ab39
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-06-05 13:03:43 +00:00
Nico Huber 10490b98e2 mb/roda/rk9: Document flash header
Change-Id: I5bd131635340ffa0c6b8979fc8e263fc5f09fdc5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-30 13:46:41 +00:00
Iru Cai c752c500fb Documentation: Add HP EliteBook 8760w
Also add the HP EliteBook document from wiki.

Change-Id: I189db9c279705af53d82af66d0c2e8afb6f84d73
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30950
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-25 12:44:03 +00:00
Patrick Rudolph 84b8f90bba mb/asus/p8h61-m_pro: Add small fixes
* Add VBT
* Configure OnBoard NIC
* Add documentation

Change-Id: Iad739b4e1dacb41f5f63247150951df7013bbf0c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-05-23 06:19:36 +00:00
Felix Singer 402fe20e3e mb/up/squared: Add mainboard
Works:
- bootblock, romstage, ramstage
- Serial console UART0, UART1
- SPI flash console
- iGPU init with libgfxinit
- LAN1, LAN2
- USB2, USB3
- HDMI, DisplayPort
- eMMC
- flashing with flashrom externally

WIP:
- Documentation
- VGA
    For some reason Seabios can not find the CBFS region
    and therefore it can't load seavgabios, but generally
    it is working as soon as Linux is booted.
- ACPI

Works not:
- Devices needs proper configuration
- Seabios can't find CBFS region

Untested:
- GPIO pin header
- 60 pin EXHAT
- Camera interface
  - MIPI-CSI2 2-lane (2MP)
  - MIPI-CSI2 4-lane (8MP)
- SATA3
- USB3 OTG
- embedded DisplayPort
- M.2 slot
- mini PCIe
- flashing with flashrom internally using Linux

Change-Id: Ia913534ec176fc600fcd4ce3af335ebe682b0ed4
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-22 12:13:22 +00:00
Patrick Rudolph b461865577 Documentation: Add Rotundu
Add information about flash and programming header.

Change-Id: If34016e20dd580f92695bef5b67dd0c282b0b421
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-05-21 14:23:34 +00:00
Bluemax b4951c92a1 Documentation: Add MSI MS-7707
Change-Id: Iba38bda9becba9fcffb51afc4756023659f092ef
Signed-off-by: Max Blau <tripleshiftone@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32236
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-05-06 10:37:04 +00:00
Patrick Rudolph d18a0cbfc1 Documentation: Make lenovo codenames human readable
Use rst parser to convert the csv to markdown tables.

Change-Id: I7fd61bd7a4e8818901520311332ae4027e7a7d02
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-04-11 11:21:10 +00:00
Maxim Polyakov 1217af5e1a mainboard: Add ASRock H110M-DVS
This board is compatible with Intel Skylake and Kaby Lake generation
processors. This patch contains the minimum configuration for booting
and stable operation of the Ubuntu OS (18.04.1, Linux kernel 4.15).
It is based on Intel RVP8 mainboard.

Intel Kaby Lake FSP 3.6.0 is used to initialize CPU and PCH.
Graphics init with libgfxinit.

Works:
  - Integrated graphics (only DVI port, tested with 1920x1080);
  - PEG x16 (FSP must be configured with BCT to enable PEG);
  - all PCIe x1 slots;
  - all USB and SATA ports;
  - SuperIO COM port for console;
  - onboard audio.

TODO:
  - other SuperIO functions;
  - onboard network chip;
  - suspend and resume;
  - documentation.

Tested on Intel Core i5-6600 processor with Seabios (rel-1.12.0-10-
g171fc89) and Tianocore/edk2 (vUDK2018-8-ge6eccfc) as a payload.

Change-Id: I69396edc50948cf1d0da649241ce92171d32daf7
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-19 21:36:49 +00:00
Balazs Vinarz bc07224da5 Documentation: Add Asus F2A85-M
Change-Id: I4d195f4833ba71fdc559815cafb0f5d0d254e897
Signed-off-by: Balazs Vinarz <vinibali1@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-03-14 11:24:24 +00:00
Philipp Hug 2ef569a405 mb/qemu-riscv: update to match current qemu version
Boots again to payload not found on qemu.

Change-Id: Ie107eb882cbaac5a5a06c1ff990e7b9364377640
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/c/30554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-26 13:40:51 +00:00
Bill XIE 9cb2da45d8 mb/lenovo/x220: Add x1 as a variant
ThinkPad X1 ( https://www.thinkwiki.org/wiki/Category:X1 ) is nearly a
clone of X220, with additional USB3 controller on pci-e (as i7 variant
of x220), and a powered ESATA port wired to ata4 (Linux' annotation).

Documentation added.

Tested:
- CPU i5-2520M
- Slotted DIMM 8GiB
- Camera
- Mini pci-e on wlan slot
- Msata on wwan slot
- On board SDHCI connected to pci-e
- USB3 controller connected to pci-e
- NVRAM options for North and South bridges
- S3
- TPM1 on LPC
- Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from
  SeaBIOS, or Linux payload (Heads)

Not tested:
- Fingerprint reader on USB2
- Onboard USB2 interfaces (wlan slot, wwan slot)

Change-Id: Ibbc45f22c63b77ac95c188db825d0d7e2b03d2d1
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/c/29434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-01-17 17:09:53 +00:00
Tristan Corrick 44095c1edc mainboard: Add Supermicro X10SLM+-F
This board runs well with coreboot. The documentation part of this
commit lists what works and what doesn't.

Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then
boots FreeBSD 11.2. It has also been tested with GRUB directly booting
Debian GNU/Linux 9.6 (kernel 4.9).

Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/c/30357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-12-29 18:26:46 +00:00
Praveen hodagatta pranesh a86c198cd5 Documentation/../../kblrvp11: Add RVP11 documentation
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Change-Id: I01509c2fa2c127b77ae72b8b0aaac0f826b0bedd
Reviewed-on: https://review.coreboot.org/c/29859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Boon Tiong Teo <boon.tiong.teo@intel.com>
2018-12-19 05:51:18 +00:00
Bill XIE 012ef7735d mainboard/lenovo/t430s: Add ThinkPad T431s as a variant
The code is based on autoport and that for T430s

Tested:
- CPU i5-3337U
- Slotted DIMM 2GiB
- Soldered RAM 4GiB from samsung (There may be more models here)
- Camera
- pci-e and usb2 on M.2 slot with A key for wlan
- sata and usb2  (no superspeed components) on M.2 slot with B key for wwan
- On board SDHCI connected to pci-e
- USB3 ports
- libgfxinit-based graphic init
- NVRAM options for North and South bridges
- Sound
- Thinkpad EC
- S3
- TPM1 on LPC
- EHCI debug on SSP2 (USB3 port on the left)
- Linux 4.9.110-3 within Debian GNU/Linux stable, loaded from
  Linux payload (Heads), Seabios may also work.

Not tested:
- Fingerprint reader on USB2 (not present on mine)
- Keyboard backlight (not present on mine)
- "sticky_fn" flag in nvram

Not implemented yet:
- Fn locking in nvram (may not be identical to "sticky_fn")
- C-based native graphic init (since T431s has eDP instead of LVDS)
- Detecting the model of Soldered RAM at runtime, and loading the
  corresponding SPD datum (3 observed) from CBFS (the mechanism may be
  similar to that on x1_carbon_gen1 and s230u, but I do not know how
  to find gpio ports for that, and SPD data stored in vendor firmware.)

Change-Id: Ic8062cacf5e8232405bb5757e1b1d063541f354a
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-12-07 11:20:53 +00:00
Subrata Banik 13415333fe Documentation/../../dragonegg: Add dragonegg coreboot development documentation
Change-Id: Ia15e317557a0893d9f80cc9e87c6b90c85b93dcf
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/29829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27 08:57:07 +00:00
Subrata Banik 0c273ae208 Documentation/../../icelake_rvp: Add RVP coreboot development documentation
Change-Id: If063cbd3436d9ee107945f425a31ba0009039a1d
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/29828
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-27 08:56:49 +00:00
Patrick Rudolph 0b8aefc656 Documentation: Add W530 / T530
Change-Id: Ib253308737f8c7a497c6ca13eab88220b1ac27ad
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/29685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-11-19 09:34:38 +00:00
Arthur Heymans 0115606286 mb/intel/dg43gt: Add documentation
Change-Id: I4e9dc67e66f719d440679b11332e2c8a764024f4
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/28258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2018-11-17 16:51:43 +00:00
Tristan Corrick 3693294112 mainboard: Add ASRock H81M-HDS
Tested with GRUB 2.02 as a payload, booting Debian GNU/Linux 9.5 with
kernel 4.9.

This board works quite well under coreboot. A list of what works and
what doesn't can be found in the documentation part of this commit.

The file `data.vbt` matches the VBT in the latest stable version of the
vendor firmware (version 2.20).

Change-Id: I53483bb9fa335e86e85dfc487fef03fce4b85e2a
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-11-16 10:05:26 +00:00
Jonathan Neuschäfer 84bf089f6a Documentation/mainboard: Add emulation/spike-riscv.md
Move the usage instructions from their ad-hoc place in Kconfig.name to
the Documentation directory, and expand them a bit.

Change-Id: Id6c7bbca40a21ecba00cab736af2f2662a985106
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-10-29 11:19:34 +00:00