With LATE_CBMEM_INIT, do not search for the initial collection from
CBMEM in ramstage. On S3 resume this would find the non-empty
collection from previous run of ramstage. Start with an empty table
instead.
Remove a spurious error message as the stamps get stashed and
will be copied to CBMEM later.
Change-Id: Ib94049531c0ac23af25407bd2ca7644ee0163d69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10300
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Implementation for cbmem_find() did not work for boards without
EARLY_CBMEM_INIT in romstage.
This is required for S3 resume to work on AGESA plaforms.
First broken with commit 0dff57d
cbmem: switch over to imd-based cbmem
Change-Id: I9c1a4f6839f5d90f825787baad2a3824a04b5bdc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10299
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
For x86 systems employing CONFIG_LATE_CBMEM_INIT, set_top_of_ram() is
called in ramstage to note the upper address of the 32-bit address
space. This in turn is consumed by cbmem. However, in this scenario
cbmem_top() cannot always be relied upon because get_top_of_ram()
doesn't return the same value provided to set_top_of_ram().
To fix the inconsistency in ramstage save the value passed in
to set_top_of_ram() and defer to it as the return value for
cbmem_top().
Change-Id: Ida796fb836c59b9776019e7f8b3f2cd71156f0e5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10313
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
The __console attribute as well as linker binding
was dropped at some point. Kill of the dead code and
infrastructure.
Change-Id: I15e1fb4468fffe2e148ec9ac8539dfd958551807
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10279
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Old file defines wrong PCI devices (1.2 2.2 3.2 4.2 5.2).
Wrong defines cause PCI devices not to be found in the pirq_data table.
Example error output:
PCI IRQ: Found device 0:02.01 using PIN A
PCI Devfn (0x11) not found in pirq_data table
PCI IRQ: Found device 0:02.02 using PIN B
Found this device in pirq_data table entry 3
Orig INT_PIN : 2 (PIN B)
PCI_INTR idx : 0x02 (INTC# )
INT_LINE : 0xA (IRQ 10)
PCI IRQ: Found device 0:02.03 using PIN C
PCI Devfn (0x13) not found in pirq_data table
PCI IRQ: Found device 0:02.04 using PIN D
PCI Devfn (0x14) not found in pirq_data table
PCI IRQ: Found device 0:02.05 using PIN A
PCI Devfn (0x15) not found in pirq_data table
Patch fixes, that pirq_data entries for pci devices 2.1 - 2.5 get found.
Change-Id: I4503433427f4ec90d022b65084c52077ba4f3511
Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com>
Reviewed-on: http://review.coreboot.org/10289
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
This should be overriden by mobo even if it's no-op override.
weak function in this case would only hide real problems.
Change-Id: I30dd671eb605b490a51153d00ae308c4bdef3d05
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7368
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Export SLIC table from file in CBFS.
Change-Id: Id0e7fe0a49b9cd50b5e43cd15030e1c2098728ec
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7202
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
The comment about necessity of include isn't true anymore as get_cst_entries
is not weak anymore so if it's not found, the linking would fail.
Change-Id: I4bf88208d63ac3e625f464c3907e2e1ea575dd9f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7375
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
All boards now use per-device ACPI. This patch finishes migration
by removing transitional kludges.
Change-Id: Ie4577f89bf3bb17b310b7b0a84b2c54e404b1606
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7372
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This code in reality just describes the southbridge features, don't put a copy
in every mainboard.
Change-Id: I8cf3019a36b1ae6a17d502e7508f36ea9fa62830
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10231
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Some missing static declarations and whitespace on the console.
Change-Id: I1af59dbfb1396297bd671b43d9326dffdd7f59d4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10284
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Same comments were already removed for the latest board, the amd/lamar.
Change-Id: Ie244f838409c567c11f7444c9cf17de72e49dbb0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10283
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Implementation corrupts low-memory on S3 resume path, rendering
OS unstable. AMD was never able to pinpoint a revision that did
not have the issue.
Change-Id: I9656ac1bfe1412775a6152b9f995c4d4ebf57159
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10285
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Tested-by: build bot (Jenkins)
Update the FSP driver files from 1.0 to 1.1.
Updates will occur manually to these files only for FSP 1.1 support. An
fsp_x_y should be added in the future to support newer versions of the
FSP specification.
Please note that due to the interface with EDK2, these files make
references to data structures and fields that use CamelCase.
BRANCH=none
BUG=None
TEST=Build for Braswell or Skylake boards using FSP 1.1.
Change-Id: I2914c047d786a3060075356783ac9758bc41f633
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10049
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
It's used only in P470 and lynxpoint machines. Remove it from other
southbridges. New machines should use src/drivers/pc80/tpm.
Change-Id: I4741e76df4c6204d65562f016abac9ed60558432
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10268
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As per discussion with lawyers[tm], it's not a good idea to
shorten the license header too much - not for legal reasons
but because there are tools that look for them, and giving
them a standard pattern simplifies things.
However, we got confirmation that we don't have to update
every file ever added to coreboot whenever the FSF gets a
new lease, but can drop the address instead.
util/kconfig is excluded because that's imported code that
we may want to synchronize every now and then.
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} +
$ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} +
$ find * -type f
-a \! -name \*.patch \
-a \! -name \*_shipped \
-a \! -name LICENSE_GPL \
-a \! -name LGPL.txt \
-a \! -name COPYING \
-a \! -name DISCLAIMER \
-exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} +
Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9233
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
acpi_fill_slit and acpi_fill_srat were removed in commit 5e597572e.
Take care of the boards that were added in the mean time.
Change-Id: I907e51de5d4ce9acfcce82e6bb30eefff312d35d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10266
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
SLIT and SRAT are created this way only on amdk8 and amdfam10.
This saves the need of having a lot of dummies.
Change-Id: I76d042702209cd6d11ee78ac22cf9fe9d30d0ca5
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7052
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Change-Id: I9c938b8a69479fae6b0eb99d1135f1caaf26d0e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10227
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Intermediate linking may distort linker behavior (in particular related to
weak symbols). The idea is that archives are closer to 'just a list of
object files', and ideally makes the linker more predictable.
Using --whole-archive, the linker doesn't optimize out object files just
because their symbols were already provided by weak versions. However it
shouldn't be used for libgcc, because that one has some unexpected side-effects.
Change-Id: Ie226c198a93bcdca2d82c02431c72108a1c6ea60
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Add support for Nuvoton NCT6779D, using NCT6776 as a baseline
Change-Id: I020a21267f7e30bdea4bb5f83d67bd94082fdf05
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: http://review.coreboot.org/10232
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The variable was set on all haswell boards, so we can do it like on
broadwell where the MSR based timer is assumed to be around, too.
Change-Id: Id48ad7454d4cf83c3b1616b64687cdcfee4baa10
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10256
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
DYNAMIC_CBMEM is only selected a couple of times but never declared
or read. Remove it.
Change-Id: I5016dac2c935d3f261001e9f388a8989540e93ae
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10255
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
MAINBOARD_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: Ica1f16182b556dbf4a3b747237af74bcc4c0608c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10254
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
CPU_HAS_BOOTBLOCK_INIT is only declared once and selected elsewhere
(with no overlap), and never read. Remove it.
Change-Id: I3f294b0724a87876a7e2f274e6933fe10321a69d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10253
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
The configuration of SPSR bits that mask processor exceptions is kinda
oddly hidden as an implict part of the transition() function right now.
It would be odd but not impossible for programs to want to be entered
with enabled exceptions, so let's move these bits to be explicitly set
by the caller like the rest of SPSR instead.
Also clear up some macro names. The SPSR[I] bit is currently defined as
SPSR_IRQ_ENABLE, which is particularly unfortunate since that bit
actually *disables* (masks) interrupts. The fact that there is an
additional SPSR_IRQ_MASK definition with the same value but a different
purpose doesn't really help. There's rarely a point to have all three of
xxx_SHIFT, xxx_MASK and xxx_VALUE macros for single-bit fields, so
simplify this to a single definition per bit. (Other macros in
lib_helpers.h should probably also be overhauled to conform, but I want
to wait and see how many of them really stay relevant after upcoming
changes first.)
BRANCH=None
BUG=None
TEST=None
Change-Id: Id126f70d365467e43b7f493c341542247e5026d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 715600c83aef9794d1674e8c3b62469bdc57f297
Original-Change-Id: I3edc4ee276feb8610a636ec7b4175706505d58bd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270785
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10250
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch adds support for integrating the runtime-resident component
of ARM Trusted Firmware (github.com/ARM-software/arm-trusted-firmware)
called BL31. It expects the ARM TF source tree to be checked out under
$(top)/3rdparty/arm-trusted-firmware, which will be set up in a later
patch.
Also include optional support for VBOOT2 verification (pretty hacky for
now, since CBFSv1 is just around the corner and will make all this so
much better).
BRANCH=None
BUG=None
TEST=Booted Oak with ARM TF and working PSCI (with additional platform
patches).
Change-Id: I8c923226135bdf88a9a30a7f5ff163510c35608d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a1b3b2d56b25bfc1f3b2d19bf7876205075a987a
Original-Change-Id: I0714cc10b5b10779af53ecbe711ceeb89fb30da2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10249
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable:
Make more obvious that there's no code execution here after payload_entry.
[pg: taken from patch linked below]
Change-Id: Ia341e5d290b10ad5ba3edb349b8a7f619022d99f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10247
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: we need to sync the i-cache in both code paths, so do it in
a single location.
[pg: taken from patch linked below]
Change-Id: Iab173acfc6d66e4dccb6f6ab916aea2007632bfd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10246
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: Make spintable handling optional through a kconfig flag.
[pg: taken from patch linked below]
Change-Id: I64610640835473fcc3d9eff01feb5f861b753eb8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10245
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable. Improve locality of code.
[pg: taken from patch linked below]
Change-Id: Ie9ea6a10b9d5e5c33bf020369afcae4f10ef068e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10244
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch slightly reorganizes arm64/boot.c with the aim of being more
readable: the secure monitor entry is now guarded by an explicit if
statement for its Kconfig rather than hiding than in the corresponding
header file. This makes it clear that there are two (soon three)
separate code paths here.
Change-Id: I44993da7a982b08f485b93ffc522d193bb3fa118
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10243
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Rename Kconfig options for secmon and spintable to be prefixed with
ARM64_ instead of ARCH_, which seems to be the standard throughout the
rest of coreboot (e.g. ARM_LPAE or X86_BOOTBLOCK_SIMPLE). I think this
provides a clearer separation between generic options that are selected
by the architecture (e.g. a hypothetical ARCH_HAS_FEATURE_X similar to
some of the MAINBOARD_HAS_... we have) and options that only make sense
in the context of a single architecture.
Change-Id: I38c2efab833f252adbb7b61ef0af60ab25b768b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10242
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The secure monitor entry is now guarded by an explicit if
statement for its Kconfig rather than hiding than in the corresponding
header file. This makes it clear that there are two (soon three)
separate code paths here. Similar change for the optional spintable
feature in the "legacy" payload entry path.
[pg: split out from the patch linked below]
Change-Id: Ia1554959b3268b718a9606e2f79d8f22f336c94d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10248
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the secmon Kconfig guard from Makefiles that add to the secmon
class since they are redundant (the class is simply not used when
compiling without secmon) to improve readability/ease-of-use.
[pg: taken out of the patch linked below]
Change-Id: I2f0ad8a923ca32fcade748ac8ee50c23cf9bafb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10241
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reorganize Kconfig (split out from the original patch linked below)
Change-Id: I84ec8e453dd7a3980de95a455ad21494c601a98c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10240
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: Ic157a6a580d7a5048ac28155e0d6b3433bbd1f2c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10239
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: I38e78fb845e43b81df084cd4d65f4618bfb2506d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
0x20 was incorrectly represented as 4 * 5 while in fact it's 4 * 8
Change-Id: I6053a3baa6de0da9f1d648009353bc1fe542f81f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10237
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Sample code belongs to documentation, not copied 100x over prodcution code.
Change-Id: I6bb318d76057d02bd6ac5641d12d56ab6d60b745
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The vboot_context.h file hasn't been used since commit
6d65f796db. Remove it.
Change-Id: I57a6c619c6e1f57be6963da2954329bc9c007dd8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10223
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
These are alternative customer options connected to J19 header.
We need to avoid modifying devicetree.cb, so we fix devicetree
for the super-io device-enables at runtime instead.
Change-Id: I04a79974b9bdf52b09ffc1b1362e201eab1ee011
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10178
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The non-module SMM programs were not being garbage collected
during linking. Do this so that one doesn't have to add dependencies
for unused functions in SMM.
TEST=Interrogated readelf -e smm.elf on both builds as well as diffed
the symbol table. Runtime testing was not done.
Change-Id: I31991496d92191e540df6340c587eec09c7022b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10219
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Fill out functions to get the offset and size for both
regions and region_devices. Additionally add a helper for
memory mapping an entire region_device.
Change-Id: I8896eaf5b29e4a67470f4adc6f5b541566cb93b5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10215
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not
disabled by GIC CPU interface. This is done by adding a bypass override
capability when the interrupts are disabled at the CPU interface. To
support this, there are four bits about IRQ/FIQ BypassDisable in CPU
interface Control Register. So the CPU can exit from WFI when an
asserted IRQ is coming. This is critical for power gating a CPU.
BRANCH=none
BUG=chrome-os-partner:39620
TEST=testing with CPU idle with power down state support and CPU can
wake up normally
Change-Id: I71ac642e28024a562db898665b74a5791fce325a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a3f098cbf3fbfdab8150ebd4fd688fdb472b529
Original-Change-Id: I20569a18f34a4b11b8c8c67ea255b3d0f021839f
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269116
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10172
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Implement the cpu_suspend for the PSCI service in secmon.
BRANCH=none
BUG=chrome-os-partner:39620
TEST=test with CPU idle driver that invoke the cpu_suspend of PSCI
Change-Id: I4cdfab88bf36bf432fb33c56c1ea114b384528f8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 90b3ea3fcb21cb393e30a8359f0328054961f6d5
Original-Change-Id: Ieb76abc017b9c3e074cc018903cef72020306a8f
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269115
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10171
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch is based on commit f2b3cd63
(lenovo/x60: Support digitizer on X60t and X201t)
Tested on Thinkpad X200 Tablet (7450): all pen functionallity
works (i.e. movements, presure sensitivity and buttons)
Change-Id: I9bd18642a6ea4211dc3be065456a507fc0b72561
Signed-off-by: Alex David <opdecirkel@gmail.com>
Reviewed-on: http://review.coreboot.org/10208
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
The check is wrong. On Acer Aspire One it returns 0 despite 2 DIMMs working
fine on the same channel if this check is disabled (tested by memtest).
On boards that have only 1 DIMM per channel, the code will simply find no
SPD and skip empty slot.
Change-Id: I5f2fdcd1d948ebf3eabebaea4441af4c19e47f8f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7568
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
We already have APM_CNT_FINALIZE defined to the same value. Just use it
thoughout.
Change-Id: Ife94ec7a34da27d3a720bda7337c02e41f18ac72
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10226
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
The struct rockchip_spi_media type is no longer used;
nor is initialize_rockchip_spi_cbfs_media(). Remove them.
Change-Id: I2c24be249e0cd89e2dd328e05cdd24a178fe37e8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10214
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
These boards are not ThinkPads. Furthermore, autogenerated build.h
might not be generated yet to be included.
Change-Id: I084f632d45477abf5e3cb1b734e8048f554423ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10213
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Inclusion of ricoh driver was lost in 1d7b9de350.
So the relevant code wasn't even compiled.
Fix copy-paste mistakes without significance while on it as well.
Change-Id: Ie548cb43f986f147658fc9c67963f8a055250598
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10211
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The spi_flash API did not have any of its callbacks
documented. Do that so that people don't have to go
into the guts of an implementation to figure out the
proper expectations.
Change-Id: I55a0515445cab3697813d88373ee413f30b557b5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10206
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently only RO-lock is supported. Make full lock available as an option.
Change-Id: Ib68a1e82733a51053a9adc80ac501b6205c6b8a7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10191
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
In order to facilitate platforms which need a buffer cache
for performing boot device operations provide infrastructure
to share the logic in managing the buffer and operations.
Change-Id: I45dd9f213029706ff92a3e5a2c9edd5e8b541e27
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9132
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Provide common code for using memory-backed region devices.
This allows in-memory buffers to act as a region device.
Change-Id: I266cd07bbfa16a427c2b31c512e7c87b77f47718
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9131
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The memory pool infrastructure provides an allocator with
very simple free()ing semantics: only the most recent allocation
can be freed from the pool. However, it can be reset and when
not used any longer providing the entire region for future
allocations.
Change-Id: I5ae9ab35bb769d78bbc2866c5ae3b5ce2cdce5fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9129
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The region infrastructure provides a means of abstracting
access to different types of storage such as SPI flash, MMC,
or just plain memory. The regions are represented by
region devices which can be chained together forming subregions
of the larger region. This allows the call sites to be agnostic
about the implementations behind the regions. Additionally, this
prepares for a cleaner API for CBFS accesses.
Change-Id: I803f97567ef0505691a69975c282fde1215ea6da
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9128
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Routing is decided based on enabled logical/virtual devices.
For a valid devicetree, one should have only one of SP3 and GPIO0,
and only one of SP4 and GPIO1, enabled at a time in configuration.
Change-Id: I02017786aba9dd22d12403aaa71d7641f5bbf997
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
That function was getting too long.
Change-Id: Ic50f210391c2467b65215aa556269b0ba601c2ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10176
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Without this some radios may remain operational. They may consume power but
the immediate demonstrable effect is wireless LED still being on.
Coreboot will reenable radios on resume or poweron.
Change-Id: I9fcb08880964b1594f779a246840bc3013a44afe
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10190
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
When we are taking the recovery path there is no slot or
components to fill out.
Change-Id: Ic97a247629365ef54a340c4398cb7491935edc11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10198
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The AGESA.c file in 3rdparty has cbfs access functions
for locating the AGESA binaries. coreboot access functions
need to be within coreboot where they can be updated with
cbfs changes. Move the offending function to coreboot.
Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10058
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
verstage previously lacked serial console support.
Add the necessary objects and macro checks to allow
verstage to include the serial console.
Change-Id: Ibe911ad347cac0b089f5bc0d4263956f44f3d116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
There was no indication of verstage being loaded. Provide this
output so that one can follow the flow from console messages.
Change-Id: I67ae6bb334608fe10a4a12fe690498afaf6b8366
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
There are more stages than currently handled in the
initial message from console_init(). Add support for those
including an UNKNOWN catchall.
Change-Id: I2374db590072bdca8ff35116e2ecb2ad6459b697
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10194
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In ee89435798 microcode for 306ax
was forgotten in migration.
Without microcode update my machine experiences random hangs and various
misbehaviour.
Change-Id: I61c704d88a8a0ed74a16fb3f80cce08e8515e6e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10180
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Add support to allocate a region just below CBMEM root. This region is
reserved for FSP 1.1 to use for its stack and variables.
BRANCH=none
BUG=None
TEST=Build and run on Braswell
Change-Id: I1d4b36ab366e6f8e036335c56c1756f2dfaab3f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10148
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The implementation of timer_monotonic_get() for the tsc
module was being guarded from SMM. Allow this to be
linked into SMM as the generic spi flash driver now needs
this support which can be included in SMM.
Change-Id: I3909edecac8de117922c4ea6c53e6e561f6f435b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10187
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
I messed up the conditionals on loading the reference code.
The bug used || instead of && causing 2 reference codes to
be loaded.
Change-Id: I29a046bf0e8dc29a9efdb636ebfd04e11eb73f82
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10185
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
The support for RELOCATABLE_RAMSTAGE was accidentally omitted in
the vboot loader. Add said support.
Change-Id: I569918823253c33f698acefd6a619133543c7aef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10184
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Tested with gizmosphere/gizmo1 Explorer add-on board, which
exposes the following device:
0x0403 Future Technology Devices International, Ltd
0x6014 FT232H Single HS USB-UART/FIFO IC
For now UART is hard-coded to 115200, 8n1, no flow-control.
Change-Id: I4081f84f7700751ccbf079e7fcbb1467aa71d872
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10063
Tested-by: build bot (Jenkins)
The vboot library currently relies on link-time known
address and sizes of the work buffer. Not all platforms
can provide such semantics. Therefore, add an option
to use cbmem for the work buffer. This implies such platforms
can only do verification of the firmware after main memory
has been initialized.
Change-Id: If0b0f6b2a187b5c1fb56af08b6cb384a935be096
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10157
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Instead of using the symbols directly provide a size
function to provide symmetry between getting the work
data and size. It also allows for an abstraction where
the linker symbols may not be the only source of this
information.
Change-Id: I4568064a0050d118c3544ab1ea59a08eb0bad8e4
Signed-off-by: Aaron Durbi <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10156
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
vboot_verify_firmware() was only defined to ease upstreaming.
It was only an empty inline as it is so remove it. Additionally,
vboot2 does not require romstage_handoff so there's no need in
adding it for the nyan boards.
Change-Id: I4d84ac9fb60c756cf10742f26503f7f11af5f57b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10155
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
As previously done the vboot loader can be optionally
inserted in the stage loading logic in order to
decide the source of each stage. This current patch
allows for verstage to be loaded and interrogated
for the source of all subsequent stages. Additionally,
it's also possible to build this logic directly into
one of the additional stages.
Note that this patch does not allow x86 to work.
Change-Id: Iece018f01b220720c2803dc73c60b2c080d637d0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10154
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
If the limit of the large starting region was set with
a NULL pointer then the limit field will be 0. If the
limit is zero then no attempt to recover is necessary
as there is no region to recover.
This prevented an early call cbmem_find() from hanging a
rambi device. The config was with vboot enabled and was
way before memory init in the sequence.
Change-Id: I7163d93c31ecef2c108a6dde0206dc0b6f158b5c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10175
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This make it pass through -fno-stack-protector, and also uses
libverstage fields consistently.
verstage is for 'stage' stuff, libverstage for all the vboot logic.
Change-Id: I3032e072414bed52effd2dc5057896781ad562c6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/10174
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
In order to allow easier setting of variables without
changing mainboards and/or chipset Kconfig files allow
the vboot options to be selected by the user.
Change-Id: I6e995eb209b4cd63c73ef679d0c5699759d129f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10153
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The VB_FIRMWARE_ARCH variable was not being set correctly,
and the VBOOT_STARTS_IN_BOOTBLOCK Kconfig option was not properly
prefixed with CONFIG_. Correct both of these oversights.
Change-Id: Id27974c285d2629bd47b90b6a93aca1ec8a76512
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10152
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Somewhere along the development path the following
vboot functions were dropped:
int vboot_enable_developer(void)
int vboot_enable_recovery(void)
Add them back, but also refactor the flag extraction
so as not duplicate all that same logic.
Change-Id: Id58f3b99f29caeff98b2d3111cfa28241d15b54f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10151
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The linker scripts are added to stage objs so remove those
from the object lists. boot.c will be needed to link verstage
properly.
Change-Id: Ib8427fe015b72e2282219f116a39949739a0af48
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10150
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The linker scripts are added to stage objs so remove those
from the object lists. boot.c will be needed to link verstage
properly. Lastly, VERSTAGE_LIB has no value so remove it.
Change-Id: Ie53b42c4995a96006463ec5b358aa43a731cb1b8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10149
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Kyösti Mälkki