Take codec out of reset (GPIO_PH1 aka CODEC_RST_L) and enable LDO2
(GPIO_PR2/KB_ROW2 aka AUDIO_ENABLE). Muxes are setup and the two
GPIOs are set to output and driven high.
BUG=chrome-os-partner:32582
BRANCH=none
TEST=RealTek ALC5677 codec shows up in I2C6 scan at address 0x2D,
can read/write registers.
Change-Id: I236850452d401fd89b4f59eb03f132c0be32fb20
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4fe3b0c1a3f5d6264b83d7a7e2363dc3f3235cbf
Original-Change-Id: Iedce7bb9f8e61d3b8cd693fc5e567323d89f8046
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/228920
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9419
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Proto 0,1,2 boards had pwr btn active high. Proto 3 onwards boards will have pwr
btn active low. Thus, select power btn polarity based on board id.
BUG=chrome-os-partner:33545
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on ryu proto 1.
Change-Id: I9b06b10358b91d40cfdb418ef8cf4da1ae833121
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7100a42b53a09ed4cb298f88d6f804f46fecacb5
Original-Change-Id: Icdf51b9324385de00f5787e81018518c5397215f
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229011
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9418
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This deprecates TERTIARY_BOARD_ID. Instead, a board will set
BOARD_ID_SUPPORT (the ones affected already do) which will set
GENERIC_GPIO_SUPPORT and compile the generic GPIO library.
The user is expected to handle the details of how the ID is encoded.
BUG=none
BRANCH=none
TEST=Compiled for peppy, nyan*, storm, and pinky
Change-Id: Iaf1cac6e90b6c931100e9d1b6735684fac86b8a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93db63f419f596160ce2459eb70b3218cc83c09e
Original-Change-Id: I687877e5bb89679d0133bed24e2480216c384a1c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228322
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9413
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This patch makes a few cosmetic changes:
- Rename tristate_gpios.c to gpio.c since it will soon be used for
binary GPIOs as well.
- Rename gpio_get_tristates() to gpio_base3_value() - The binary
version will be called gpio_base2_value().
- Updates call sites.
- Change the variable name "id" to something more generic.
BUG=none
BRANCH=none
TEST=compiled for veyron_pinky and storm
Change-Id: Iab7e32f4e9d70853f782695cfe6842accff1df64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c47d0f33ea1a6e9515211b834009cf47a171953f
Original-Change-Id: I36d88c67cb118efd1730278691dc3e4ecb6055ee
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228324
Reviewed-on: http://review.coreboot.org/9411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
There are changes in upcoming board revs that need to take
different action depending on board revision. Update the
enumeration to reflect upcoming reality.
BUG=chrome-os-partner:33578
BRANCH=None
TEST=Built and booted.
Change-Id: Ib51393e04d3255bbd44e5d77a2a7903109beebf4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de8d629678c0ae17af9f7145e04d95f43c927ee0
Original-Change-Id: I64cdeab806e7a665051f1d47bbf044413f7a1196
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227681
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9407
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The gpio_get_tristates() function prints out the values
observed while processing the GPIOs. Additionally, the
values for the normalization were completely consecutive.
Therefore, this indirection can be removed.
BUG=chrome-os-partner:33578
BRANCH=None
TEST=Built and booted.
Change-Id: I088a2f1c7601c014a7f8a9eb228efa9bb80f1e01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 02e52554b9cbf85034feb9aedc50f09b70893e32
Original-Change-Id: I17d85891087e3128790329a5f05cbdab4cbc950e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227680
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9406
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The function to read board IDs from tristate GPIOs currently supports
two output modes: a normal base-3 integer, or a custom format where
every two bits represent one tristate pin. Each board decides which
representation to use on its own, which is inconsistent and provides
another possible gotcha to trip over when reading unfamiliar code.
The two-bits-per-pin format creates the additional problem that a
complete list of IDs (such as some boards use to build board-ID tables)
necessarily has "holes" in them (since 0b11 does not correspond to a
possible pin state), which makes them extremely tricky to write, read
and expand. It's also very unintuitive in my opinion, although it was
intended to make it easier to read individual pin states from a hex
representation.
This patch switches all boards over to base-3 and removes the other
format to improve consistency. The tristate reading function will just
print the pin states as they are read to make it easier to debug them,
and we add a new BASE3() macro that can generate ternary numbers from
pin states. Also change the order of all static initializers of board ID
pin lists to write the most significant bit first, hoping that this can
help clear up confusion about the endianness of the pins.
CQ-DEPEND=CL:219902
BUG=None
TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one
I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush,
Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure.
Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d
Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
We've had gpiolib.h which defines a few common GPIO access functions for
a while, but it wasn't really complete. This patch adds the missing
gpio_output() function, and also renames the unwieldy
gpio_get_in_value() and gpio_set_out_value() to the much easier to
handle gpio_get() and gpio_set(). The header is renamed to the simpler
gpio.h while we're at it (there was never really anything "lib" about
it, and it was presumably just chosen due to the IPQ806x include/
conflict problem that is now resolved).
It also moves the definition of gpio_t into SoC-specific code, so that
different implementations are free to encode their platform-specific
GPIO parameters in those 4 bytes in the most convenient way (such as the
rk3288 with a bitfield struct). Every SoC intending to use this common
API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most
4 bytes in length. Files accessing the API only need to include <gpio.h>
which may pull in additional things (like a gpio_t creation macro) from
<soc/gpio.h> on its own.
For now the API is still only used on non-x86 SoCs. Whether it makes
sense to expand it to x86 as well should be separately evaluated at a
later point (by someone who understands those systems better). Also,
Exynos retains its old, incompatible GPIO API even though it would be a
prime candidate, because it's currently just not worth the effort.
BUG=None
TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and
Veyron_Pinky.
Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e
Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch aligns tegra132 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Rush_Ryu.
Change-Id: I5cdf4008a65db84f15c937ef53aab5e4d3ef24c4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5c5c63d7b6399d3eb8a211b15d47829fe93a591
Original-Change-Id: Ifafd4d42d4fb04a1c37e8a5f23877c2b550cf44c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224505
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9369
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
There's no need to add DMA ranges for these boards as
that memory is allocated within dpethcharge now. Additionally,
the DRAM_DMA_* Kconfig options were removed resulting in 0
values.
BUG=None
TEST=Built rush and ryu.
BRANCH=None
Change-Id: I597437960e4fddbf6d26f0b15ddeefc4557adc8b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26b503d759b2bac902e58e928d7c625c1a6c575
Original-Change-Id: I52bb8f760a56226c75611f7981570a44d56f242e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219710
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Do the absolute minimum needed to allow the DPAUX mux ctl write
for I2C6. This leaves HOST1X off (reset and clock disabled) to
avoid a conflict with any kernel display driver init.
I2C6 init/enable will be moved to ramstage in the next CL.
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I42106778a26c5a1d1483cc308b8314599c391539
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a9ebfda31c620b24e5c765dc950b87e3e5587b
Original-Change-Id: I0760222f1d7ccee207ae9871aeed3e2ddbca3dca
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218900
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9093
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
With the generic spin table support in place, use that.
BUG=chrome-os-partner:32082
BRANCH=None
TEST=Booted into kernel.
Change-Id: I8644f8a81b24bf4e00f8fac1d1018f9db77c952f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b1a4fe27070a80c8448051ec0565120901378673
Original-Change-Id: Id0832a4553101a366f011099e0744f6630d91924
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218656
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9086
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Now that arm64 and tegra132 has cpu devicetree support stop
using the bring_up_secondary_cpu option.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Built and brought up 2nd core.
Change-Id: I3ffca6c1fa0932d8aafea30a160608b5593ae154
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c45b22ce9fd0345c3e599fd814993db66e2b96cc
Original-Change-Id: I210bea73f8249de15f99d0c062600e789184eefd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216928
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9059
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add all the CPUs to the device tree.
BUG=chrome-os-partner:31761
BRANCH=None
TEST=Brought up 2nd core on ryu in kernel.
Change-Id: I4cc51f30897e3bd6c1b275a95d5da34ce7ae320e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 485de634a49d606dc6e7168f047eb9365e26415f
Original-Change-Id: I682f23a9b68f49206aa99d55e800540d8d0f8900
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216426
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9034
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This function is breaking display bring up in the kernel. While
this functionality may be needed it's not until there is a
necessity to beep and/or bring up the display in firmware.
BUG=chrome-os-partner:31820
BRANCH=None
TEST=Sean ran with this patch and the display indeed did come up.
Change-Id: I5cf8a6c6e6941ee138991933215f96f5562382be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 038bc1d53028409d0640c78fb62c7025ba12dcb9
Original-Change-Id: I833d66a0e63e04118b130b6803a7a3b68c802148
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/216421
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9031
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are not needed/were never really used. SDRAM init will now
be done in sdram.c, not the BootROM.
BUG=chrome-os-partner:29921
BUG=chrome-os-partner:31031
BRANCH=None
TEST=Built rush_ryu AOK.
Change-Id: Id046592415574badb97026224e1e525c174eece4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aab1045817125cb022c8e8b89b85ef14e581baa7
Original-Change-Id: I7d25de3e888bb24e4c6e6dea2726510c97fe1730
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/215863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9030
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The power button signal is driven from the silego part.
It's active high when the button is pressed.
BUG=None
BRANCH=None
TEST=Booted with power button pressed. vboot saw the press and
requested a shut down.
Change-Id: Ifff1bd8d4340849e0c218812fd401b61c90c5743
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b6bd7c0de38e1078b85f1671493c6d2948d43149
Original-Change-Id: If25ebce28c1ab5a363f3b4b5ab9fc24baebad56a
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214847
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9028
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of calling out the gpio index and port numbers use
real names. It's semantically clearer and there's only one
place to adjust the hardware values.
BUG=chrome-os-partner:31106
BRANCH=None
TEST=Built and booted.
Change-Id: I4a0bc034fe4f648b73ebf6389d8669fe15db1d8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5f2af2e32903b3df64f3f25a42fb42b0b629152c
Original-Change-Id: I68c138b428abbd0c9bc60be0cfc70681528d7728
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215542
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9027
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The kernel doesn't have the logic for bringing up the plld.
Therefore, configure it in the firmware. The clock used
is an interim value until the display controller sequencing
is fully implemented.
BUG=chrome-os-partner:31640
BRANCH=None
TEST=Noted configured freq is close to requested. Also, no
more plld errors observed from the kernel.
Change-Id: I0788c83843699ec7cef52b3a219ebb9b0db9082f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b44956ec87e9083aebe589349cbe168f7f101d8b
Original-Change-Id: I6f57d5c48630385d1814e7ef61898a2d49c8f747
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214841
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9026
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instruct the SoC to bring up the 2nd core.
BUG=chrome-os-partner:31545
BRANCH=None
TEST=Brought up 2nd core in Linux.
Change-Id: I4b31ea5f1466c43abce273b2bfb6a4d06b7faa63
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 74c62e62a6790de65e303123abee2be1dfffbee3
Original-Change-Id: I5f5febc4719951188106041f73625231eafe1b08
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214778
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9022
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:30748
TEST=Verify that LTE modem appears on USB during kernel boots on Ryu.
Change-Id: I5b73a632ab827abe9c064a097e04d2c9030f9b46
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 070538e60b384d17e17ba3544881ef642c3f33ba
Original-Change-Id: I8ec1f94c9aec5b4895a01cdfd3b86f88cd6bb877
Original-Signed-off-by: Ben Chan <benchan@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/214020
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use the bus number enumerations from funit to make the
pad names and bus numbers consistent and clearer.
BUG=chrome-os-partner:31106
BRANCH=None
TEST=Built and booted to kernel.
Change-Id: If84ed825537f598c033dcacbcba759e0fe4e90ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f4375a8e47f572d618044f65603fb9288832f936
Original-Change-Id: I817a56e879ecc96474128d624dc46c12ebc5c7a8
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213492
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8997
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=none
BRANCH=none
TEST=built ryu, booted to recovery mode OK
Ran TegraShell and could r/w I2C6 regs OK
Change-Id: I7dca131ab5bd4dac50891937f792ac70b1bb532f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 29591a97fbb8fc42143ff6c7838c9935834ca516
Original-Change-Id: Ic74e3518ab69ec7b1bc3bc4f637b7b38b85734c9
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/212926
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
BUG=chrome-os-partner:31293
BRANCH=None
TEST=Able to get sporadic USB communication in depthcharge on ryu.
Change-Id: I6bf6559d167a6ea94523d2500b54c1c7854330f4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e5412cfc149902298f2ebeb3030d8f09f27e5ee8
Original-Change-Id: Ic5402d18943c3cc8fb4556c47e587134633fbf72
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212333
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8939
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Use the new funit API to do all the dirty work.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and ran through depthcharge and into recovery just like
before.
Change-Id: I8625a06dd847bd3dcfc3ce5a50a31d6aff0b860f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ebc04a174269ae072eda804e172fd24362f417d2
Original-Change-Id: Ief2d81c5569c33a90fc9458d741edef1dcbd8239
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212152
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8930
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Currently ryu needs a DMA region in order to communicate with
USB devices. Therefore, add that region to the memory map.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=With usb added am able to talk to a USB mass storage device
albeit inconsistently.
Change-Id: I7efaf2ba44cc94dc64af3f1cd916bdc5c7ff0795
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e93389479518ee28dc3477da0c6e6e33fa8a47d1
Original-Change-Id: I6b5c052ccaafce30705349e07639dffbb994901f
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/212162
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8926
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Two changes: 1. A44 ID straps use different gpio pins than nyan.
2. A44 uses tristate values instead two state values.
BUG=none
BRANCH=none
TEST=Built and tested on A44 board.
Change-Id: I6a36f6da0c9f6168780606ba76595c7a0af8e8bf
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2eb0cae0e3396da1eaeaa72411c4b74300138a7b
Original-Change-Id: Ia2a4309d3b63b0a94d79465dd727b01fae01e1b9
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211753
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8920
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The current 2 boards were setting up clocks and enabling
peripherals that apply to the SoC generically. Therefore,
move the common pieces into the SoC code.
BUG=chrome-os-partner:31105
BRANCH=None
TEST=Built and booted through depthcharge on ryu.
Change-Id: I94ed4b5cc4fafee508d86eefe44cf3ba6f65dc3b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6dad573c8689b79bb4aa615811a10f44e7d8c809
Original-Change-Id: I6df1813f88362b8beaf1a716f4f92e42e4b73406
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211191
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/8917
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The I2C pads connected to the EC are pulled to 3.3V. Therefore
the pads need to be configured as open drain.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built and booted through depthcharge on ryu
Change-Id: Ie5eadfe6aca78eb31fbca4e8d8117d1061acbbec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1530e7e7f500be47355eada56591ac2dbf1e9326
Original-Change-Id: Ia4ad2377d01296235fc7efbba72fa790016c04af
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211135
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8916
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Ryu's EC talks proto v3 over i2c. Select the correct protocol.
BUG=chrome-os-partner:31148
BRANCH=None
TEST=Built and ran on ryu. Coreboot can speak to the EC now.
Change-Id: Iaed0d2db3c3c93667d65beea98b9719bdbbbfe41
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b71cad3bb1e9b64c48b6f2eeb7573c408a508fb3
Original-Change-Id: I50e192cd58f7a29103ab94afc002da18822d4080
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211240
Original-Reviewed-by: Stefan Reinauer <reinauer@google.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8915
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Add the supporting Kconfig options and infrastructure for
performing vboot firmware verification.
BUG=chrome-os-partner:30784
BRANCH=None
TEST=Built and ran on ryu into depthcharge noting vboot paths
being taken.
Change-Id: I1d803208cd5789bd73244b91beac6a5a4598ea70
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a2e7d84725739843a1ed1868fcadebb60477a6dc
Original-Change-Id: Ie4c8c3939990a12fc528423948b236230392eb7c
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211134
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8914
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
coreboot already has a reset API. Utilize it by selecting
HAVE_HARD_RESET. The tegra132 boards have to provide the
hard_reset() implementation as that involves board-specific
bits. The tegra132 code then provides a cpu_reset() routine
that just promotes that call to a hard_reset().
For the existing tegra132 boards remove the unnecessary files
from the build.
BUG=chrome-os-partner:30784
BRANCH=None
TEST=Ensured hard_reset() does something on Ryu.
Change-Id: I6d5aa928fec95b361175e35e0a26812829ffdfc3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 31edd4ff7486ded87d2525cd360d48959b6aef7c
Original-Change-Id: I1e1b014062dafb5d81fb9da40006c5405073a95d
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211131
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Now that there's a working udelay() in tegra132, upclock
CAM_I2C and SPI1 to the same speeds as used on Nyan.
BUG=chrome-os-partner:30998
BRANCH=rush_ryu
TEST=Built Rush and tested, no nack errors seen.
Change-Id: If1ee6d5c711252e294818d6263732bb34b2fe6f0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 859c0d4fde2cf098cb829e96a5d6dec394bea600
Original-Change-Id: I58fd03ed3512c2498c793cfe30b0c302e4b0e3d4
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211043
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8910
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These are used by the LPDDR3 code in sdram.c.
Based on the schematic and email, I've filled in 4 slots
in sdram_configs.c. My A44 returns RAMCODE 0 (using only bits
1:0) for Samsung SDRAM. I haven't tested the other 2 types of
RAM (Hynix and Micron). The 4th slot is a fallback slow Micron
config.
Previously existing configurations were dropped.
BUG=chrome-os-partner:29921
BUG=chrome-os-partner:31031
BRANCH=None
TEST=Built for rush and rush_ryu.
Change-Id: I55a737db269fe5fac1565d58bd8f8afcbc5beecb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a431466171a85a5c8151e7466eb5f77862e7b44
Original-Change-Id: If216096ffc9e9836b6d082ad0668640b3eec37b7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Id: a45e7788dd78697ac5f48b6cc64108ca0e4912dd
Original-Change-Id: Ib7e8b814eb6dadb9b366536721876a3eeba0d2c0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/216000
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of calling out with function names all the possible
combinations of interface and device provide one call to the
mainboard to configure all the necessary bits.
BUG=chrome-os-partner:31104
BUG=chrome-os-partner:31105
BRANCH=None
TEST=Built and ran on rush.
Change-Id: Id7817e85065884d64f90ac514bf698bf539f2afe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f4f63f5965d403a32872d7b52c180694f5ef679d
Original-Change-Id: Id27d9c2da4dccdff38c48dc5cdeb1a68cf23cbfc
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210838
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8901
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Rush has its EC on SPI, and Ryu has it on I2C, so need both
mainboard_init_ec_spi and mainboard_init_ec_i2c in both builds,
due to romstage.c being in the common tegra132 subdir.
BUG=none
BRANCH=rush_ryu
TEST=Built both rush and rush_ryu images OK. Will try to
boot on Ryu later.
Change-Id: Iddbf9e9f6de7ba7244f9dd2e810fb6178937c85a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d8b81717c366d19b43964bed3c4047598db4495
Original-Change-Id: I48d9530697d5669177ecd9ba3c34360197002003
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210595
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Switch over to the padconfig API for bootblock PAD configurations.
Aside from support code, each entry is 4 bytes. The open coded
calls were 12 bytes each.
BUG=chrome-os-partner:29981
BRANCH=None
TEST=Built for ryu.
Change-Id: Iff981509f258c8fe7bbc2e24ce87bad0c43a55b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8a7ee469124eeb6d05b978b5e68a2fc03b102f47
Original-Change-Id: I2d32d702da38bc0d87a1c159113bba32f4c03407
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210837
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8879
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Instead of hard coding certain pieces of a board in the common
chipset code provide a way to initialize things early in the
bootblock path. Add a bootblock_mainboard_early_init() function
before console init to performany necessary mainboard initialization
early in the bootblock.
BUG=chrome-os-partner:31104
BUG=chrome-os-partner:31105
BUG=chrome-os-partner:29981
BRANCH=None
TEST=built both on rush and ryu. rush still behaves the same.
Change-Id: Idcf081eeffd189a4e2cbfeb8a4ac5dd0a3d1f838
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4a523add6de03bea0d88e95b9dbb5e283c629400
Original-Change-Id: I7d93641dff3a961f120e8f0ec2d959182477ef87
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210835
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8877
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
