We have 3 similar Lenovo mainboards - x60 (oldest), t60, and z61t (most
recent addition). The only one with two consequent 2s as the C-types
is t60:
static acpi_cstate_t cst_entries[] = {
{ 1, 1, 1000, { 0x7f, 1, 2, { 0 }, 1, 0 } },
{ 2, 1, 500, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV2, 0 } },
{ 2, 17, 250, { 0x01, 8, 0, { 0 }, DEFAULT_PMBASE + LV3, 0 } },
};
It seems that 3 could be a better choice for the last line here.
UNTESTED on a real hardware.
Change-Id: I090e82d5f4ae25c768ff45a01a8dd76ff8a96a90
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/29160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Family 17h will not use the Arch2008 (a.k.a. v5) wrapper. Remove
all source, support functions, and comments related to AGESA.
Family 17h requires v9 which has no similarities to v5 for
integration into a host firmware. AGESA v9 support will be added
via subsequent patches into the appropriate locations.
Change-Id: Iea1a41941a0ba364a6abaaf31cc8e1145db4a236
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
When system shuts down, RTC enable eosc calibration feature to save
power. Then coreboot RTC driver needs to call rtc_enable_dcxo function
at every boot to switch RTC clock source to dcxo.
BUG=b:128467245
BRANCH=none
TEST=Boots correctly on Kukui
Change-Id: Iee21e7611df8959cbbc63b6e6655cfb462147748
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
outb accepts a value followed by a port
Change-Id: I6fe3961b4f8cb2454e3b2564c3eae6af06c9e69d
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33940
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
As per EDS Sata port implemented register is byte width (bits[3:0]) hence
converting required DWORD based read/write to BYTE width read/write.
TEST=Able to boot from SATA device on CML hatch.
Change-Id: I545b823318bae461137d41a4490117eba7c87330
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34070
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some of the values used for GPIO_CFG and MISCCFG were not correct,
causing GPEs to not work correctly. This adjusts them according to the
values found in the original ACPI tables for the System76 Gazelle.
Unfortunately, the Intel documentation[1] mentioned below is
also incorrect. I have mentioned this to Intel already. The source
for the Intel CoffeeLake FSP also confirms these new numbers.
This was tested on a System76 Gazelle (gaze14). The EC uses GPP_K3 for
its GPE and GPP_K6 is used for the lid switch GPE. Both function
correctly after applying this change.
[1] Intel Document #572235:
Intel ® 300 Series Chipset Families
Platform Controller Hub
External Design Specification (EDS) - Volume 2 of 2
Change-Id: I4ecc9552468037598ef5d4e10122d660dcbfe71d
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
It is occasionally useful to print a uintmax_t or intmax_t, so add
support for the j specifier. This also makes defining the PRI* macros
in <inttypes.h> simpler.
Change-Id: I656e3992029199b48e62a9df2d56f54c34e4e10f
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
vtxprintf() can only print numbers in base 8, 10, and 16, so the
extra letters in the alphabet aren't needed.
Change-Id: I6a51c13f3298a597e801440f86bf698bdd8c736a
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34028
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
While running the s0ix cycling test, we observed SMM Handler caused
a stack overflow. This error happens during event log access.
This change is to increase the SMM_MODULE_STACK size to 0x800
BUG=b:135551854
TEST=suspend_resume test pass 500+ cycles, originally issue happenes
within 150 cycle
Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
To call dev_find_slot(0, xx) in romstage can produce
invalid results since PCI bus enumeration has not
been progressed yet.
Replace this with method that relies on bus topology
that walks the root bus only.
Change-Id: I2883610059bb9fa860bba01179e7d5c58cae00e5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Find the NIC device based on the PCIe root port function.
Change-Id: Ia8c6e115c9b836ee60862427dfc9d46ca3dd1b69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Like the line above it, this should be & instead of | (otherwise it will
always incorrectly return true). spi_locked() is only used internally to
decide which opcodes will be used to talk to the flash, and if it is
falsely reported as locked, the worst case should be a denial of service
(unless there are more bugs).
Change-Id: I5208b523c815d15d7263594f06ccfacd8a9510b1
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Found-by: Coverity CID 1402092
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With VBOOT=y && VBOOT_MEASURED_BOOT=y message
digest will be allocated from the stack and
1 KiB reserve used with the recent platforms
was no longer sufficient.
The comment of LZMA scratchpad consuming stack
was obsolete for postcar, so these can be reduced
to same 4 KiB.
Change-Id: Iba1fb5bfad6946f316feac2d8c998a782142a56a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Use of romstage_ram_stack_bottom() was invalid, it
potentially uses a different ROMSTAGE_RAM_STACK_SIZE
from the postcar_frame_init() call.
If alignment evaluated to 1 MiB, that WB MTRR may not
have covered all of CBMEM range, having some impact
on boot speeds.
There is no need to accurately describe write-back
MTRR ranges for postcar.
Change-Id: Icb65cef079df56fadcc292c648cab8bdbb667f47
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This reverts commit f70cb8bf96.
It was merged prematurely with some vague argumentation in the commit
message and not all issues of reviewers were addressed.
Change-Id: Ia336f3499fb29976a6b80383ef8b0f3d552f5640
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
It's forbidden to use dereference CAR_GLOBAL variables
directly. The notation fails after CAR teardown for
romstage.
Change-Id: I6e6285ca0f520608c2a344517fbac943aeb36d87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33995
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove the mailbox call to notify the PSP that DRAM is ready. This
is not supported on Family 17h.
Remove the selectable SMU firmware. This is a feature of the PSP
bootloader and the standard bootloader doesn't contain the ability.
Clean up additional mentions of PSP within picasso.
Change-Id: I8abeb4c375dbff3b438cd18ccaaf66e11c86e72e
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
The command line options for picasso will look different than
stoneyridge. Remove the fanned/fanless distinction to simplify
the makefile.
Picasso will use subprograms instead of fanned/fanless SKUs.
Change-Id: I50d8751e14b00ca53a6498f8e6c7f3f42543dace
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33753
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso doesn't implement the AcpiMmio XHCI_PM registers. Remove
source that uses these. Remove USB devices from the AOAC registers.
Remove the D0/D3 support from ASL, including all supporting xHCI
firmware loading support. Remove xHCI firmware from amdfw.rom.
Change-Id: Iae4c72c5a8e353ca8db02d04735f8d2b28441793
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Add a utility to generate a compressed BIOS image for AMD Family 17h.
If the input is an elf file, the utility extracts the program portion
for compression. Otherwise the file is compressed as-is.
In modern AMD systems, the PSP brings up DRAM then uncompresses the
BIOS image into memory prior to x86 beginning execution. The PSP
supports a zlib engine, and interprets the first 256 bytes as a
header, where offset 0x14 containing the uncompressed size. For
further details, see AMD Platform Security Processor BIOS Architecture
Design Guide for AMD Family 17h Processors (NDA only, #55758).
BUG=b:127766506
TEST=Use with WIP Picasso
Change-Id: Id1c54e0a6dae9e4a0362c6635fe8b8aa48a369d8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
It was never tested or injected.
Change-Id: I3fd82aaa11afc5adab212ec6709580b4bcc67ca3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34001
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Only (conditionally) used part was dump_pci_device()
and that was never particularly useful either.
Change-Id: Iaacfa511de1ce1e0bdbd2e8a74e41d336e505670
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Google project name is Bloog.
Bloog is 12-inch LCD.
Blooguard is 14-inch LCD so would prefer to use a different SAR values instead.
Use sku-id to load the SAR values.
BUG=b:135078377
BRANCH=octopus
TEST=build and verify SAR load by sku-id
Change-Id: Id80df28a961eb1f62714558df2b219aa552ecb97
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33935
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
When we added CONFIG_VBOOT_MIGRATE_WORKING_DATA, the idea was that on
some Arm platforms the original working data buffer was in SRAM, which
stays accessbile for the whole runtime of the system. There is no reason
to migrate it into CBMEM on those platforms because ramstage and the
payload could continue to access it in SRAM.
Now that we've had a couple of months of experience with this option, we
found that most of our Arm platforms have some issue that requires
migrating anyway, because BL31 often claims SRAM for itself and makes it
inaccessible to the payload. On the remaining platforms, accessing SRAM
from the payload is possible but still an issue, because libpayload
doesn't have enough memory layout information to set up proper page
tables for it, so we're accessing it uncached and at risk of alignment
errors.
Rather than having to figure out how to map the right SRAM range for
every platform in the payload, let's just get rid of the option.
memcpy()ing 12KB isn't worth this much hassle.
Change-Id: I1b94e01c998f723c8950be4d12cc8f02b363a1bf
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33952
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Use literals KHz & MHz for kilohertz and megahertz frequency usages
in macro definition.
Change-Id: If1ca6e5e7b0603f93f3c980cc85af470fdcd54ba
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
The flag is useful for updaters to determine which areas to leave
alone, such as VPD (vital product data) regions that are set in
factory and might contain unique (MAC addresses) or hard to obtain
(calibration output) data.
It's also useful to see which regions are marked as such.
Change-Id: Ic0a229d474b32ac156cfabc917714ce9d339bac6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
MMIO_BUS_RANGE_SHIFT is a numerical value and not a bit field.
Change it to simply 2. Otherwise its usage winds up evaluating
to BusRange << (1 << 1).
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I2a6ecfc9fbfd45f69194b8daef43ff84a1dfd5fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Increase the timeout for USB requests to 5 seconds for all USB host
controllers.
Prior to this fix, the xCHI driver was detecting false timeouts during
SET ADDRESS requests when nested downstream hubs were connected to the
xHCI root hub.
BUG=b:124730179
BRANCH=sarien
TEST=Build libpayload and depthcharge on sarien/arcada.
TEST=Without change replicate USB set address timeouts in depthcharge
when dock and 4K monitor connected (which includes a total of 4 USB
hubs). With timeout fix, depthcharge boots OS with no USB errors and
the same USB topology. Note that this tests xHCI operation only.
Change-Id: I53e3e67d893420e7c9e8b52c47dd0edb979e5468
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Also don't define the default as this results in spurious lines in the
.config.
The only difference in the generated config.h is that for most board
ARCH_RISCV_M goes from 1 to 0. This should not matter.
Change-Id: I3e8c1cc5696d621e243696a3b5e34f62ab69a688
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31311
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Elyes HAOUAS