Some Intel SoCs which support SGX feature, report the
microcode patch revision one less than the actual revision.
This results in the same microcode patch getting loaded again.
Add a SoC specific check to avoid reloading the same patch.
BUG=chrome-os-partner:42046
BRANCH=None
TEST=Built for glados and tested on RVP3
CQ-DEPEND=CL:286054
Change-Id: Iab4c34c6c55119045947f598e89352867c67dcb8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ab2ed73db3581cd432f9bc84acca47f5e53a0e9b
Original-Change-Id: I4f7bf9c841e5800668208c11b0afcf8dba48a775
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287513
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11055
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
If Skylake microcode is being loaded from FIT, Skylake supports
the PRMRR/SGX feature. If this is supported the FIT microcode
load will set the msr (0x08b) with the patch ID one less than the
ID in the microcode binary. This results in microcode getting
reloaded again in the bootblock cpu init.
Avoid the microcode reload by checking for PRMRR support.
BUG=chrome-os-partner:42046
BRANCH=None
TEST=Built for glados and tested on RVP3
Change-Id: I06e59f5cad549098c7ba2dfa608cd94a0b3f0ae1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6242b9dea283149bd0c968af1ba186647d37162d
Original-Change-Id: Iea5a223aa625be3fc451e8ee5d3510f548b07f8b
Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286054
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11052
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
We've seen an increasing need to reduce stack sizes more and more for
space reasons, and it's always guesswork because no one has a good idea
how little is too litte. We now have boards with 3K and 2K stacks, and
old pieces of common code often allocate large temporary buffers that
would lead to very dangerous and hard to detect bugs when someone
eventually tries to use them on one of those.
This patch tries improve this situation at least a bit by declaring 2K
as the minimum stack size all of coreboot code should work with. It
checks all function frames with -Wstack-usage=1536 to make sure we don't
allocate more than 1.5K in a single buffer. This is of course not a
perfect test, but it should catch the most common situation of declaring
a single, large buffer in some close-to-leaf function (with the
assumption that 0.5K is hopefully enough for all the "normal" functions
above that).
Change one example where we were a bit overzealous and put a 1K buffer
into BSS back to stack allocation, since it actually conforms to this
new assumption and frees up another kilobyte of that highly sought-after
verstage space. Not touching x86 with any of this since it's lack of
__PRE_RAM__ BSS often requires it to allocate way more on the stack than
would usually be considered sane.
BRANCH=veyron
BUG=None
TEST=Compiled Cosmos, Daisy, Falco, Blaze, Pit, Storm, Urara and Pinky,
made sure they still build as well as before and don't show any stack
usage warnings.
Change-Id: Idc53d33bd8487bbef49d3ecd751914b0308006ec
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8e5931066575e256dfc2295c3dab7f0e1b65417f
Original-Change-Id: I30bd9c2c77e0e0623df89b9e5bb43ed29506be98
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236978
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9729
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Remove the items that are obviously broadwell left or become no-need
with fsp.
BUG=chrome-os-partner:43186
BRANCH=None
TEST=build and boot on sklrvp3.
Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Change-Id: I5dfd62363eecc514e45a7b7ba0961ec7fe0499ee
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 570920cdc9e9c08ee85dcb08998069f1cae2d3cd
Original-Change-Id: I63176584042516c4d28f1bb6403e7bbe5de61010
Original-Reviewed-on: https://chromium-review.googlesource.com/288833
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Robbie Zhang <robbie.zhang@intel.com>
Original-Tested-by: Robbie Zhang <robbie.zhang@intel.com>
Reviewed-on: http://review.coreboot.org/11072
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Some of the field and register names in the power management
code were not reflecting current chipset documentation. While
in there fix 0-sized array in the power_state structure. Lastly,
log the entire STD GPE register for visibility in elog. It reports
as an extension of other GPIO wake events.
BUG=None
BRANCH=None
TEST=Built and booted.
Change-Id: I57a621a418f90103ff92ddbf747e71a11d517c9a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: ed15cc7d0aeee8070e134ed03e28fced9361c00e
Original-Change-Id: I19f9463c87e9472608e69d143932e66ea2b3c3e1
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288296
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11070
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to aid users of the PCR register space provide
pcr_port_regs().
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built glados.
Change-Id: Ibfcffbfd4304a59dd80a88dc18404d3a5dfa2f5d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 5f796319ba1d00557e32bf18309fc3cc772ccae0
Original-Change-Id: I21243d18c1bbd19468f8f279b2daa4e40a8f0699
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288193
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11068
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to provide more clarity on what some of the gpio
functions are doing add a 'gpio_' prefix to the globally
visible functions.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built glados.
Change-Id: I4cf48558c1eb9986ed52b160b6564ceaa3cb94b4
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: f79ef113797884063621fe6cd5cc374c53390ebd
Original-Change-Id: I0d8003efff77b92802e0caf8125046203f315ae4
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288192
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11067
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
These types and definitions were carried over from a previous
platform. However, they are not used. Remove them.
BUG=chrome-os-partner:42982
BRANCH=None
TEST=Built on glados
Change-Id: Ib3d20222df34a32865aac6b6cf13517c208e17c6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: be2d0d273a6c02483a944edac95ab48c433b29cd
Original-Change-Id: I56a0d549f5733eec8f405f2024ced8c153fa545c
Original-Signed-off-by: Aaron Durbin <adurbin@chormium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/288191
Original-Trybot-Ready: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Robbie Zhang <robbie.zhang@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11066
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
As in cold boot path, implement MBIST workaround in lp0
resume path.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume
Change-Id: I997009ecb0f52fb5a47c62b8daea33e472ec2664
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 4b1f80ea4c1d3782eb9f2c90c2a8d7b2e97ba050
Original-Change-Id: Ib4944401e1df02bf0aab1e78db7e14ef56c7f829
Original-Reviewed-on: https://chromium-review.googlesource.com/287287
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://review.coreboot.org/11071
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Copied from Change-Id: I8d8dc0c0b98bbd194095d47047c8c5199ce17769
BUG=chrome-os-partner:43022
BRANCH=None
TEST=Used physical recovery button to enter dev mode on rialto
Change-Id: I39fd13fee3b9f272f3dc08a447091e05a3d74741
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: eed0652f84cba963044908bb91aac7b8c1c81fd4
Original-Signed-off-by: Jonathan Dixon <joth@chromium.org>
Original-Change-Id: I388d8bb0faa93b54540be095e68450192592a093
Original-Reviewed-on: https://chromium-review.googlesource.com/287660
Original-Reviewed-by: Jason Simmons <jsimmons@chromium.org>
Reviewed-on: http://review.coreboot.org/11069
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Modify MR3_I/O Configuration, Change 34.3 ohms to 60 ohms. This
resolves an issue that was observed on some Mickey boards with
the Samsung 2GB LPDDR3 and is believed to be caused by inferior
routing on the small PCB. (Elpida 2GB LPDDR3 seems unaffected.)
BUG=chrome-os-partner:41905
TEST=Boot from mickey
BRANCH=None
Change-Id: Ic20d9eceb00658c214fd032a2f213dbe0d51a91b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1305010aee6818910ad1dec26d9d948505ca281e
Original-Change-Id: I5517e07fc5716ed4cd58e5502f13ccd61ffb5357
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286333
Reviewed-on: http://review.coreboot.org/11051
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The PLLU and UTMIPLL power-up sequences have been fixed in the
kernel. It's no longer necessary for the XUSB partitions to
be ungated at boot.
This reverts commit 3a4a8a97c1851b6f3dd211451d9678358fac3ad7.
BUG=chrome-os-partner:41244
TEST=Build and boot on Smaug; xHCI still works.
BRANCH=none
CQ-DEPEND=CL:282765
Change-Id: Id9a1c9960b6c7286b3185c60371d864874f50bb3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d52e50240bca62997af729722fbcdf5226438b7f
Original-Change-Id: Ieb9c8644a5fb108d77703933fde82d359f403fd1
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286810
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Mark Kuo <mkuo@nvidia.com>
Original-Reviewed-by: Mark Kuo <mkuo@nvidia.com>
Reviewed-on: http://review.coreboot.org/11050
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Commit "BCRD2: Enable LPDDR3" with the Change-Id listed below contained
additions to braswell's chip.h which were lost during merging.
BRANCH=None
BUG=None
TEST=google/strago builds
Change-Id: I995b788b6a308cefa23228544127bb1e384bbcc7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 561edf23ab696772fd0a6af34cb435db9d96e912
Original-Change-Id: Ie08900bc62d517394412cc597274fb8f5b6b0f51
Original-Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Original-Change-Id: I1cb5a03b77baf2df125b648dd75c9f8166f5571e
Original-Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Original-Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com>
Original-Original-Reviewed-on: https://chromium-review.googlesource.com/282155
Original-Reviewed-on: https://chromium-review.googlesource.com/288880
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11065
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Enable PMIC SVID config for BCRD2 based
on board id. UPD parameter is used to
select the SVID config and PMIC I2C bus
number
BRANCH=None
BUG=None
TEST=Build and boot the system
Change-Id: I3c4c06bd25c241abdf46aa14af74eecf77cf77a6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Original-Commit-Id: 10bb8d4ad96d1187f6e135ca1535d70ae45ee887
Original-Change-Id: I9191db7bace4f4840e3c32381093c6c0806f7c32
Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282156
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11060
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The fspNotify(EnumInitPhaseAfterPciEnumeration) is already
registered in fsp_util.c as a generic callback, this is some code
left from early development.
Also I don't see a need for the chip_final function, although we
could keep it as a placeholder but i decided to remove it.
BUG=chrome-os-partner:42979
BRANCH=None
TEST=build with current fsp and the coming fsp 1.3.0, boot on sklrvp3.
Change-Id: Ia892f2021be324859c344b4cb8cdeaf75f7ee32f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ae22ad57ddbab787da000ae99f85fd2b3d4092e7
Original-Change-Id: I41be566da71f80451ff70ddd8ada77bf9b8d5b1d
Original-Signed-off-by: robbie zhang <robbie.zhang@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287991
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11054
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
bootblock.inc requires config.h to be around which may need to be
created. Have make be aware of it.
Change-Id: I79ad003b461d7da7a5afecdae55fdd07ba735821
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/11057
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add some board specific code to enable the memory configuration
GPIOs in GPIO input mode and read them to determine which
memory type is on the board.
Also add the other memory types that are not yet present in
the glados mainboard directory.
This should be replaced with the real gpio infrastructure once
it is ready.
BUG=chrome-os-partner:43069
BRANCH=none
TEST=build and boot on glados
Change-Id: I7a9ce10e92ad6681528572e87b6cfee29880841a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d81e969c5950fd89bb745d1403abddb08a942f83
Original-Change-Id: Iffb0bd5c176f2adbdd9302d9bff5b7bde725d671
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287436
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11046
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In order to build without CONFIG_CONSOLE_SERIAL the Skylake
SOC Kconfig should not be enabling serial console by default.
Also fix other compile issues when serial console is disabled.
BUG=chrome-os-partner:40857
BRANCH=none
TEST=build glados without serial console enabled
Change-Id: I2b20d9d9cd66e79587525f7bb458782eeeac4a95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f40fbea8d5dade560c08e4abf15a2a1cc28b9e55
Original-Change-Id: I6c5da8a5eee4090c89deb8feba676479cd834292
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287438
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11043
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The audio codec nau8825 and two ssm4567 speaker amps are instantiated
via ACPI.
BUG=chrome-os-partner:41280
BRANCH=none
TEST=The devices are instantiated. Speaker/headphone playback works on glados.
Change-Id: I1297c2435b3051dd749ad7de324b64ba1504cf09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59e5eb2682a2fc2cb58068dfcb6dd2415d43b286
Original-Change-Id: Ib7ec8c868251601f67cdf365cd3e935d256c8ac5
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282364
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
some jerry panels need more delay time between the vcc_led and bl_en,
so we extend the delay time from 20ms to 120ms.
BUG=chrome-os-partner:42997
TEST=Boot from jerry, and do not flicker again
BRANCH=none
Change-Id: Ifcf84578038eb5c2e5a0dfae936ee63cef671968
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b00b6bd108f0aae461085d00819eca08ec892b3
Original-Change-Id: I74999601b41ccac22493cc9cd0bf52cd4dbb8c26
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287373
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The correct function prototype is
void write32(void *addr, uint32_t val)
BUG=chrome-os-partner:38073
BRANCH=none
TEST=build lp0 code and see it succeed.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: Icadc9e2d142e5a222509e894f43b0c8a70eed031
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b46635d9d3ee1ca364e7ad6d6dd7ea9efa9dedbc
Original-Change-Id: Id2b6847af80dfddcb3b7133a663becb78ed477ba
Original-Reviewed-on: https://chromium-review.googlesource.com/285544
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11049
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The checkpatch.pl scripts complains about the placing of the inline
keyword:
ERROR: inline keyword should sit between storage class and type
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BUG=chrome-os-partner:38073
BRANCH=none
TEST=repo upload works ;)
Change-Id: Ibd2b8a437eda2fc720f8fc32c5821bae3be41d12
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d20c0d34240966d5ae39c1667d4486b4341e183b
Original-Change-Id: I36d600c4677c622c334d849bf260323592a8a4fc
Original-Reviewed-on: https://chromium-review.googlesource.com/285543
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11048
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus
KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC
bridge register 0x78 (particularly the 0x7b byte) to get to ramstage:
Assume that there's something about this register that adjusting it the
way we do for K8 is something that can/should be universally avoided on
all Fam10h systems with these chipsets.
Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10984
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
For audio to work, need to enable CLK_V_EXTPERIPH1 clock.
This CL is needed because after MBIST workaround is applied,
CLK_V_EXTPERIPH1 clock is default to be off.
BUG=None
BRANCH=None
TEST=Tested on Smaug, hear beep when press Ctrl+U at serial console
when DEV screen is showing
Change-Id: I32dccc0c7983f8fa86812d845a2f00ac9881d521
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 149d04e6ba642734d5ea36cac8206fad3ac13ce0
Original-Change-Id: Ifa1afb0798c1039c8ea9084b5a7ee3b09b4d70ac
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285604
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11041
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Enable WRAP to INCR burst type conversion in MSELECT.
MSELECT CONFIG register can only be accessed by CPU. So do
it in ramstage when CPU is started.
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: Iee05531c45e566f47af24870be6068247c2d9a00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21d9e4d3a8827f7bba57c03ca36b702aaba1ce20
Original-Change-Id: I6a241455b28f24b8756ad09bf7605a2e7e52af57
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282418
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11040
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MBIST has left some registers in non-suggested states. This CL
restores CAR CE's, SLCG overrides & PLLD settings.
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: I1ddb19dd9fb6d8fb4d36e67eedeb847c6fd9f774
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37a1c90c6deb351b2ae2caa03e5076553126744b
Original-Change-Id: I613b4ef622d64305d436cb8379a5170b0fe1c9af
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282417
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11039
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Like in cold boot path, need to set CAR2PMC_CPU_ACK_WIDTH to 0
in lp0 resume path.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume
Change-Id: Iffd7fa4d0266e2ec482ec17e5203ceff8afe748f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 052b649b1e6a4e34d621d710ee43aec7149ab8a8
Original-Change-Id: Icdf9879469485fb37b820b30c9663eda528ac013
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286600
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/11037
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
MBIST workaround needs more space in bootblock.
bootblock += 4KB; romstage -= 4KB
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: I8338d0a134185a425af36e302dcf0ed1520b7e21
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 388523bf4fa25ff3ecf9607ff36ce7c6109485ed
Original-Change-Id: Ib08f2ff438f9d96a19b44af1b3e13260966f98f1
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287286
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11038
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update the write protect GPIO reported in ACPI to be 71 which
is GPP_C23. Also update the controller id to INT344B:00 which
will point at the sunrisepoint device in /sys/class/gpio.
BUG=chrome-os-partner:42560
BRANCH=none
TEST=verify crossystem output with and without WP enabled
Change-Id: I625859bd8ac371a5c0cae18697dccf216c26a8b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8fc5cb6b72dacd6aefe69fe8204f4e0d209ed8a4
Original-Change-Id: I04892e75f9bfe739c44eb40e7c6a969c33e157ca
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286842
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11035
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The FSP memory info hob does not return this data so we need
to supply it from the SPD included with the mainboard.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=execute "mosys memory spd print all" on glados
Change-Id: Idfb71d36d1f8163d0daceb68675b10194db7cde7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7feece45900e5166864927047ad3ab7b997f8258
Original-Change-Id: Id2bc544ac5faf53f0f676fe132fea1db5640a401
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286877
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11034
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Since the FSP memory info HOB does not return all the data that we
need about a DIMM add a weak function that will allow the mainboard
to supplement the generated memory_info structure.
Ideally this would not be necessary but until FSP returns the
module part number we need this.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=run "mosys memory spd print all" on glados
Change-Id: Ic6d0ee0a31d23efcf7e7d7f18a74e944e09e7b46
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34ad7f1906ba526e52d38d5a6bce7b88b83f0c13
Original-Change-Id: I8509c5c627c1605894473fdea567e7f7ede08cf9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286876
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11033
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Add SMBIOS symbols to define the memory width. Update the Intel common
code to display the memory width and provide the memory width to SMBIOS.
Also display the memory frequency, size and bus width in decimal.
BRANCH=none
BUG=None
TEST=None
Change-Id: I67b814d79fdbbf6ce65ac6b4a8282ab15fb91369
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e59c7260afd180f3adcbeda7cef1b9eca3ed846
Original-Change-Id: Ibd26812c2aad4deaab62111b1e018be69c4faa7b
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282115
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The write protect gpio is not added to the gpio map
so the structure is not valid for vboot to consume.
BUG=chrome-os-partner:42560
BRANCH=none
TEST=build and boot on glados, check basic crossytem output
CQ-DEPEND=CL:286911
Change-Id: I228d75049b919449072e395699c822203a08f1c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d15438c4bf56d92189f2f501a62b55b5d00ba461
Original-Change-Id: I3290c4b96e1cc675c618a983915b778f11175020
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286930
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11031
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Remove the C types and functions from PCR so that pcr.h
can be included from assembly and ACPI. While in there
make the PCR reg caclulation using a C function and
place the P2SB (PCH_PCR_BASE_ADDRESS) address in iomap.h.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I9cde178bcdbf49327ef7892393fc277f6c74f34b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fdf5c77ecfa0ca8d3c45604d15b9dec9a6e85193
Original-Change-Id: I5996efaa9869f8f412e4d45c13f30233384a38b2
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286901
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11030
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The current primary to sideband (P2SB) code for private configuration
register (PCR) access weren't very clear with the naming or
reasoning for some of the code. Provide more verbiage surrounding
this interface.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I5b2e84444a29b2fc2f527502e8c9f26eb60e687a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 06345ba1abd893059a6584856851f92f43289247
Original-Change-Id: If57a4bbc90365c1135b4986dce328b5dbabe483b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286900
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11029
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
No devices are connected to i2c4 bus on
both strago and cyan board.
Hence disabling the ALS platform data.
This will fix the i2c4 timeout issue and
also help in boot time optimization.
Removed unused macros.
BUG=None
BRANCH=chrome-os-partner:41934
TEST=After booting to kernel, i2c4 timeout
error message should not appear in dmesg.
Change-Id: Ib7ab4c95b0830a8d4e53c6c0ee919649ad1ed354
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c52b64037b46016fe01f1d55c4c58f7684eb778
Original-Change-Id: Ia7acdcef67a2f2837866f56aa0426a02ee05db46
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283608
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11005
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
In BCRD2, RTEK audio codec is connected to I2C4.
Create a RTEK device entry on I2C4 to enable Audio
on BCRD2. In BCRD1, RTEK device is connected to I2C2.
Having two devices with same HID breaks the Audio
on BCRD2 even if I2C2.RTEK._STA returns 0. The Audio
codec driver in kernel is hard coded to use first
instance of the device (:00). When two devices are present
with same HID, first device gets an instance number :00
even though _STA returns 0. Second device which is on I2C4
and POR for BCRD2 assigned with instance number :01. The
device with :01 is not getting enabled since the Audio codec
driver supports only :00. This need a proper fix in kernel
which is in the pipeline. Audio on non BCRD2 platforms on
Strago build would be disabled since RTEK device is not present
on I2C2.
BRANCH=None
BUG=None
TEST=Build and boot the system
Change-Id: Ia97d011c951275e6179c8b79a22c496b8169356b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d71a41ee703e6f60299b9e31a408af2ca06d8e24
Original-Change-Id: I4b032e930e46da77474f8f5969e95f9560b3e905
Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285193
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com>
Reviewed-on: http://review.coreboot.org/11003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Moves the K8 CPU_ADDR_BITS definition from socket to model.
Previously socket_F was not setting CPU_ADDR_BITS correctly.
Tested on Sun Ultra 40 M2 with two 2nd-gen Opterons w/ 2x4x2GiB DIMMs.
Most if not all K8-based chips support 40-bit physical addresses, with
possible exception of IA32-only K8-based Athlon XP-M chips.
Probably irrelevant, unless your machine has enough memory (at least 60 to
64GiB before MMIO hoisting) to exceed the CPU_ADDR_BITS default of 36 from
src/cpu/x86/Kconfig.
Change-Id: I01a2a59fa902280171840c36ca2e631476d3d603
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10963
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
The new toolchain depends on it.
Change-Id: I9070925eeb3f63a6c31e7474ffb9cba15884703d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: I3cf6a579f4e62a59828e81aa63c3a1a020a15ea6
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10906
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
For people new to Linux, add the xxd hint to compare output with output
from Linux.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Ia46aeed056b12abbadf8205b044944385d9410e1
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10207
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Rizwan Qureshi