Commit Graph

25677 Commits

Author SHA1 Message Date
Furquan Shaikh 0a144fa583 mb/google/octopus/variants/phaser: Provide override GPIO config
This change provides override GPIO table for variant phaser depending
upon the board id. Additionally, early_gpio_table is also provided for
phaser since EN_PP3300_WLAN needs to be handled differently based on
board id.

BUG=b:111743717
TEST=Verified that GPIO configuration for the override GPIOs is
different than before with this change.

Change-Id: I4d2e829e1b886299442c17cecc069854b742b43c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-26 15:37:08 +00:00
Furquan Shaikh 06a41f1f60 mb/google/octopus: Use newly added gpio_configure_pads_with_override
This change updates mainboard_init to call
gpio_configure_pads_with_override instead of gpio_configure_pads to
allow variants to provide overrides for the GPIO config table provided
by the baseboard.

BUG=b:111743717
TEST=Verified on phaser that GPIO config with and without this change
is the same.

Change-Id: I494a950100e5ec82504d652ff6e8a75746456d1f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27641
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 15:36:44 +00:00
Furquan Shaikh 4a12a56cdf soc/intel/common/block/gpio: Add API for gpio_configure_pads_with_override
This function adds support for gpio_configure_pads_with_override
which:
1. Takes as input two GPIO tables -- base config table and override
config table
2. Configures each pad in base config by first checking if there is a
config available for the pad in override config table. If yes, then
uses the one from override config table. Else, uses the base config to
configure the pad.

This is done to allow sharing of GPIO tables across baseboard-variants
for various boards i.e. Each board can have a base config table which
is provided by the baseboard and an optional override config table
that can be provided by a variant to configure certain GPIOs
differently. It is helpful when the variant GPIO diff list is not very
huge compared to the baseboard.

BUG=b:111743717
TEST=Verified that the GPIO config for phaser is same with and without
this change.

Change-Id: I1c5dc72c8368957201ab53d2e8398ff861341a4c
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 15:36:32 +00:00
Aaron Durbin e7f4780137 mb/google/octopus: update phaser touchscreen enable gpio
The next build for phaser swapped the gpio for the touchscreen
enable. In order to support previous builds the devicetree needs
to be updated at runtime based on board revision id.

BUG=b:111808427,b:111743717
TEST=built

Change-Id: I45ef05ea0b991d04d5bf410cd7a175913bf0bf5d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27638
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 15:36:11 +00:00
Aaron Durbin 2fcc034705 mb/google/octopus: add variant devicetree update callback
The variants of the octopus family have their own schedule and needs
for modifying settings based on the phase of the build schedule while
also needing to maintain support for previous builds. Therefore, utilize
the SoC callback, mainboard_devtree_update(), but just callback into
the newly introduced variant_update_devtree(). The indirection allows
for the ability to move the call around earlier than the
mainboard_devtree_update() if needed while maintaining consistency in
the naming of the variant API.

BUG=b:111808427,b:111743717
TEST=built

Change-Id: If1c2f60cabe65b5f1c6a04dd60e056e50c4993df
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-26 15:35:57 +00:00
Aaron Durbin a0dabd1848 device: add child traversal helper function
Add a function, dev_bus_each_child(), which walks through all the
children for a given bus of a device. This helper allows one to
walk through all the children of a given device's bus.

BUG=b:111808427,b:111743717
TEST=built

Change-Id: Iedceb0d19c05b7abd5a48f8dc30f85461bef5ec6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-07-26 15:35:44 +00:00
Aaron Durbin 8c2852420c mb/google/octopus: remove unused variant_board_id()
The variant_board_id() API was never used on octopus because all
boards in the octopus family used the EC to get board id, i.e. they
all use EC_GOOGLE_CHROMEEC_BOARDID. Therefore, remove the code
and declarations so as not to cause confusion.

BUG=b:111808427,b:111743717
TEST=built

Change-Id: I4f9a24b46dd4262120075d3d42daf22015a3dd50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/27635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-26 15:35:34 +00:00
Felix Held e75bac3a00 sio/smsc/fdc37n972: add missing pnp_conf_mode field to ops struct
This patch makes it possible to enter the config mode of the super IO chip, so
that changes can be made to the configuration registers.

Change-Id: I7e31eaf217b3af2226c1e7d2f14f2ef7b0d7ddbe
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2018-07-26 14:22:28 +00:00
Felix Held 968ac7914d ec/google: pass ops to pnp_enable_devices instead of LDN-specific override
Since ops was passed as override in the pnp_dev_info struct, the generic
pnp_ops that was passed to pnp_enable_devices was never used.

Change-Id: Id09c6cffb9a0cbbd9189c18801121449c9504422
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27394
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 14:15:56 +00:00
Patrick Rudolph 5af2deae92 nb/intel/sandybridge/raminit: Fix SMBIOS 17 bus width
The bus width has to be encoded where the lower 3 bits are the bus width
in multiple of 8 and the following two bits give the error checking
bits in multiple of 8.
Hardcode to 64 bit as done on haswell.
TODO: Make it dynamic once there's ECC support.

Change-Id: I3b83a098205455b1c820d0436c6984938f261466
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22261
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-26 14:12:02 +00:00
Patrick Rudolph 652c491917 nb/intel/sandybridge/raminit: Fix PDWN_mode on desktops
On desktop boards the PPD bit of MRS register MR0 is set and thus
DLL_Off mode shouldn't be used, as enforced by datasheet
2nd-gen-core-family-mobile-vol-2-datasheet chapter 2.17.1.

Change-Id: Ic42f2ff3e719636be67b00fa37155939cd2e17de
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22260
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-26 14:11:38 +00:00
Tom Hiller 8ba9e8cf63 util: Add description.md to each util
Descriptions are taken from the files themselves or READMEs. Description
followed by a space with the language in marked up as code.

Change-Id: I5f91e85d1034736289aedf27de00df00db3ff19c
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-26 13:26:50 +00:00
Tom Hiller ed6d1e6dcc util: Add util_readme script
Bash script to concatenate description.md files into ./util/README.md
and Documention/Util.md

Change-Id: I015ae6816ea74cacb7f0332fda2c3ebef205c1e2
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27564
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 13:26:29 +00:00
Felix Held de690a30a4 asrock/g41c-gs: make serial console setup depend on selected super IO
The used super IO is selected in Kconfig depending on the board variant, so use
the selected super IO instead of the board variant directly.

Change-Id: I8421e7c9b1f9ca875c9291f4105c3c20726adfd0
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-26 12:39:01 +00:00
Arthur Heymans 4c2f26c9fc nb/intel/nehalem: Remove the C native graphic init
Libgfxinit provides a better alternative to the native C init. While libgfxinit
mandates an ada compiler, we want to encourage use of it since it is in much
better shape and is actually maintained.

This way libgfxinit also gets build-tested by Jenkins.

Change-Id: I9228fa7eadfe2a827c1f4de9d6710b60d3f1b121
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-26 11:35:59 +00:00
Arthur Heymans 3d00f7798c mb/packardbell/ms2290: Allow use of libgfxinit
Untested but expected to work.

Change-Id: I5a77b7a4343f108f46cf1f97a94e61e88eecb417
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27514
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 11:35:40 +00:00
Hung-Te Lin 03e9cb9b35 mediatek/mt8183: Enable bootblock self-decompression
MT8183 only allows booting from eMMC, so we have to do eMMC emulation
from an external source, for example EC, which makes the size of
bootblock very important.

A fully functional bootblock (that can boot into verstage or romstage)
is about 38000 bytes. If self decompression (CONFIG_COMPRESS_BOOTBLOCK)
is enabled, only 25088 (66%) bytes are needed.

Inspired from crosreview.com/1070018.

BUG=b:80501386
TEST=manually flashed into kukui and boots into romstage.

Change-Id: I7a739866a4ea3bcafe2ff7b9e88d5ed00f3f3e40
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/27599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-07-26 11:34:05 +00:00
Pratik Prajapati 4c067c8550 nocturne: configure VR per Intel recommendation
These values are Intel recommended.
IccMax = 28A
DC and AC LL = 4mOhms
Pl2 = 18w

BUG=b:79666828
BRANCH=none
TEST=Enabled p-states with patch 
Change-Id:I82d1516998cc26b789faa5d4e897feb06dc06020 and then
"emerge-nocturne depthcharge coreboot chromeos-bootimage", flash spi
image onto nocturne, boot to kernel and verify device stays alive and
responsive for several minutes without locking up.

Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/27175
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 11:33:05 +00:00
Pratik Prajapati 0545166485 mb/google/poppy/variants/nocturne: enable p-states
This patch enables p-states for nocturne which was disabled by commit
de31587a (mb/google/poppy/variants/nocturne: disable p-states). p-states
feature was disabled as a temporary work-around as system was getting
hung while booting up. Now with IMVP7 firmwware turning and hardware
rework the issue is not seen, so its safe to enable p-states.

BUG=b:79666828
BRANCH=none
TEST=cherry picked Change-Id: I4c67c6a095aecc158e529a6b393baf03ec358a3d
patch and then "emerge-nocturne depthcharge coreboot chromeos-bootimage"
, flash spi image onto nocturne, boot to kernel and verify device stays
alive and responsive for several minutes without locking up.


Change-Id: I82d1516998cc26b789faa5d4e897feb06dc06020
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/27257
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26 11:32:49 +00:00
Arthur Heymans 5eb2115c3d Documenation/conf.py: Make sure release is a string
With python3 the split method can operate on strings while check_output
generates bytestrings.

Change-Id: I7b455c56e8195f0ecfbe5e360ac161c176f00115
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-26 11:15:56 +00:00
Arthur Heymans c9297c6780 Documentation/writing_docs: Document the need for recommonmark
python-recommonmark is need for sphinx to be able to hande the markdown
documentation.

Change-Id: I9513ab4bdc753e0350754d9869239ea833893af9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-26 11:15:38 +00:00
Patrick Rudolph d308ed37bc arch/arm64: Add Kconfig to include BL31 as blob
Add Kconfig options to not build the Arm Trusted Firmware, but use
a precompiled binary instead. To be used on platforms that do not
have upstream Arm Trusted Firmware support and useful for development
purposes.

It is recommended to use upstream Arm Trusted Firmware where possible.

Change-Id: I17954247029df627a3f4db8b73993bd549e55967
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-07-26 00:44:33 +00:00
Furquan Shaikh d1b482c716 mb/google/octopus: Fix unused pins and those with external terminations
For unused pins in octopus baseboard, configure them as GPIO input
and use the default termination. For the pins where board has an
external termination, remove SOC's internal termintation.

BUG=b:110654510

Change-Id: I67ec62913b0ef47105289838218f5d74c004223c
Signed-off-by: Shamile Khan <shamile.khan@intel.com>
Reviewed-on: https://review.coreboot.org/27183
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-25 21:35:22 +00:00
Furquan Shaikh 9c462c617e soc/intel/apollolake: Get rid of power button device in coreboot
As per the ACPI specification, there are two types of power button
devices:
1. Fixed hardware power button
2. Generic hardware power button

Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
is not set in FADT by the BIOS. This device has its programming model
in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
power button device by default if the power button FADT flag is not
set.

On the other hand, generic hardware power button can be used by
platforms if fixed register space cannot be used for the power button
device. In order to support this, power button device object with HID
PNP0C0C is expected to be added to ACPI tables. Additionally,
POWER_BUTTON flag should be set to indicate the presence of control
method for power button.

Chrome EC mainboards implemented the generic hardware power button in
a broken manner i.e. power button object with HID PNP0C0C is added to
ACPI however none of the boards set POWER_BUTTON flag in FADT. This
results in Linux kernel adding both fixed hardware power button as
well as generic hardware power button to the list of devices present
on the system. Though this is mostly harmless, it is logically
incorrect and can confuse any userspace utilities scanning the ACPI
devices.

This change gets rid of the generic hardware power button from APL
and relies completely on the fixed hardware power button.

BUG=b:110913245
TEST=Verified that fixed hardware power button still works as expected
on octopus.

Change-Id: I86259465c6cfaf579dd7dc3560b4c9e676b80b55
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27273
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25 18:52:47 +00:00
Furquan Shaikh d7b88dcbcd mb/google/x86-boards: Get rid of power button device in coreboot
As per the ACPI specification, there are two types of power button
devices:
1. Fixed hardware power button
2. Generic hardware power button

Fixed hardware power button is added by the OSPM if POWER_BUTTON flag
is not set in FADT by the BIOS. This device has its programming model
in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this
power button device by default if the power button FADT flag is not
set.

On the other hand, generic hardware power button can be used by
platforms if fixed register space cannot be used for the power button
device. In order to support this, power button device object with HID
PNP0C0C is expected to be added to ACPI tables. Additionally,
POWER_BUTTON flag should be set to indicate the presence of control
method for power button.

Chrome EC mainboards implemented the generic hardware power button in
a broken manner i.e. power button object with HID PNP0C0C is added to
ACPI however none of the boards set POWER_BUTTON flag in FADT. This
results in Linux kernel adding both fixed hardware power button as
well as generic hardware power button to the list of devices present
on the system. Though this is mostly harmless, it is logically
incorrect and can confuse any userspace utilities scanning the ACPI
devices.

This change gets rid of the generic hardware power button from all
google mainboards and relies completely on the fixed hardware power
button.

BUG=b:110913245
TEST=Verified that fixed hardware power button still works correctly
on nautilus.

Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/27272
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-25 18:52:40 +00:00
John Zhao e3816b4bc9 vendorcode/intel: Update GLK FSP Header files w.r.t FSP v2.0.5
Update FSP header files to match FSP Reference Code Release v2.0.5
for Geminilake

BUG=b:111683980
CQ-DEPEND=CL:*653835

Change-Id: Ib5ac532843fdb30ac3269fb6ed96dd05ef5736cc
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/27623
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25 18:38:39 +00:00
Philipp Deppenwiese db70f3bb4d drivers/tpm: Add TPM ramstage driver for devices without vboot.
Logic: If vboot is not used and the tpm is not initialized in the
romstage makes use of the ramstage driver to initialize the TPM
globally without having setup calls in lower SoC level implementations.

* Add TPM driver in ramstage chip init which calls the tpm_setup
  function.
* Purge all occurrences of TPM init code and headers.
* Only compile TIS drivers into ramstage except for vboot usage.
* Remove Google Urara/Rotor TPM support because of missing i2c driver
  in ramstage.

Change-Id: I7536c9734732aeaa85ccc7916c12eecb9ca26b2e
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/24905
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25 15:53:35 +00:00
Patrick Rudolph b009ac49c8 nb/intel/sandybridge/raminit: Fix non ASCII char
Change-Id: I3f0869dc0b72bef7da8313c69da4fe2a63761ad9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27633
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-25 14:20:22 +00:00
Patrick Rudolph 5ee9bc1840 nb/intel/sandybridge/raminit: Set REFIx9 according to spec
Set tREFIx9 to 8.9*tREFI/1024 as suggested in
xeon-e3-1200v3-vol-2-datasheet.pdf chapter 4.2.15 or
2nd-gen-core-family-mobile-vol-2-datasheet chapter 2.14.1.

Use the minimum value of REFI*8.9 and tRASmax as suggested by
3rd-gen-core-desktop-vol-2-datasheet.pdf chapter 2.13.9.

Change-Id: Ifd32a70f28aa75418030b0e4d1fc7d539a315f83
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-25 13:18:26 +00:00
Felix Held 8c85880236 superio/winbond: remove LDN-specific ops overrides
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array

Change-Id: I4311834f3970bd3471f2f5a73ca7da3c03936d37
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25 09:28:20 +00:00
Felix Held a2c49b0299 superio/via: remove LDN-specific ops overrides
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array

Change-Id: I14dbeda9832a25116cf53c36197615e9d02d5134
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25 09:27:58 +00:00
Felix Held 552bc70c65 superio/renesas: remove LDN-specific ops overrides
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array

Change-Id: I42469c844074db57071d0191d12d8fd64f462672
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25 09:27:22 +00:00
Felix Held bbc3094441 superio/intel: remove LDN-specific ops overrides
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array

Change-Id: I5bd525532c01b3b9f7ddbc8eab42caa8b7f30795
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25 09:26:47 +00:00
Felix Held 8ac8ac635c superio/fintek: remove LDN-specific ops overrides
The pnp ops struct is already passed to the pnp_enable_devices function and it
is used if no override is supplied in the elements of the pnp_info struct array

Change-Id: Ic6387032e043b6ad9e9ceefd2fcc1cdf843e2989
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/27387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-07-25 09:26:27 +00:00
Joel Kitching 72d77a9a0c cbfstool/extract: ignore compression field for some payload segments
When extracting a payload from CBFS, ignore compression fields for
these types of payload segments:
  - PAYLOAD_SEGMENT_ENTRY
  - PAYLOAD_SEGMENT_BSS
  - PAYLOAD_SEGMENT_PARAMS

These types of payload segments cannot be compressed, and in certain
cases are being erroneously labeled as compressed, causing errors
when extracting the payload.

For an example of this problem, see creation of PAYLOAD_SEGMENT_ENTRY
segments in cbfs-mkpayload.c, where the only field that is written to
is |load_addr|.

Also, add a linebreak to an ERROR line.

BUG=https://ticket.coreboot.org/issues/170
TEST=cbfstool tianocore.cbfs extract -m x86 -n payload -f /tmp/payload -v -v

Change-Id: I8c5c40205d648799ea577ad0c5bee6ec2dd7d05f
Signed-off-by: kitching@google.com
Reviewed-on: https://review.coreboot.org/27520
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24 20:42:37 +00:00
T.H. Lin 770b0346ff mb/google/poppy/variant/nami: Add custom VBT for panel T8/T10
Fix VBT SSF setting for panel T8/T10 as Akali/Akali360 panel
has T8 minimum 33.3 ms and T10 minimum of 100 ms.

BUG=b:111530392
BRANCH=nami
TEST=emerge-nami coreboot chromeos-bootimage
Test & measure T8/T10 waveform

Change-Id: I642a1aa0b2d13b33e6113f94e73dfc77834766d4
Signed-off-by: T.H. Lin <t.h_lin@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/27507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-07-24 18:55:02 +00:00
Arthur Heymans e750b38e48 cpu/x86/mtrr.h: Rename MSR SMRR_PHYS_x to IA32_SMRR_PHYSx
This is how these MSR's are referenced in Intel® 64 and IA-32 Architectures
Software Developer’s Manual.

The purpose is to differentiate with MSR_SMRR_PHYSx.

Change-Id: I54875f3a6d98a28004d5bd3197923862af8f7377
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24 18:34:37 +00:00
Matt DeVillier 6b27c38f4a google/glados: use level trigger for touchpad interrupt
Coolstar's custom touchpad drivers for Windows require level triggering,
and the Linux drivers don't care/perform identically either way. Set
touchpad interrupt to level trigger, matching change made to other
Chromebooks.

Test: boot Windows 10 on google/chell, verify touchpad functional

Change-Id: Id5f145b8b24c04f9c6661710a0cda95f135293e9
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24 12:07:56 +00:00
Matt DeVillier fefd8e7fde google/glados: enable VMX for all variants
Explicitly enable VMX, as some OSes (eg, Windows) need VMX
feature enabled and locked in order to fully support virtualization

Test: boot Windows 10 on google/chell, verify OS reports virtualization
enabled

Change-Id: I53ff575755a9ca376dbf953db96191c17bf57f5f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27549
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24 12:07:20 +00:00
Matt DeVillier bba1ee070d google/asuka: Add as a variant of glados
Add google/asuka (Dell Chromebook 13 3380) as a variant of
glados Skylake reference board:
- add asuka-specific DPTF, EC config, GPIO config, Kconfig,
    NHLT config, PEI data, VBT, SPD data, and devicetree

Adapted from Chromium branch firmware-glados-7820.B, commit
b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX]

Test: build/boot google/asuka, verify correct functionality

Change-Id: I591578fea2514a28c75177835807c3f250904577
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27421
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24 12:05:42 +00:00
Matt DeVillier ec975b0a4f google/cave: Add as a variant of glados
Add google/cave (Asus Chromebook Flip C302SA) as a variant of
glados Skylake reference board:
- add cave-specific DPTF, EC config, GPIO config, Kconfig,
    NHLT config, PEI data, VBT, SPD data, and devicetree

Adapted from Chromium branch firmware-glados-7820.B, commit
b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX]

Test: build/boot google/cave, verify correct functionality

Change-Id: I5c5181ce68f7a24ccd49f53ecd9d48c081fd085a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24 12:05:12 +00:00
Matt DeVillier 19e7060d7f google/caroline: Add as a variant of glados
Add google/caroline (Samsung Chromebook Pro) as a variant of
glados Skylake reference board:
- add caroline-specific DPTF, EC config, GPIO config, Kconfig,
    NHLT config, PEI data, VBT, SPD data, and devicetree
- add caroline-specific memory-init param to romstage
- adjust mainboard EC SCI events for boards with tablet function

Adapted from Chromium branch firmware-glados-7820.B, commit
b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX]

Test: build/boot google/caroline, verify correct functionality

Change-Id: I611a4e76581ba2e5b42e1bc48b0a5b8c70f3598e
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24 12:04:37 +00:00
Matt DeVillier 57dd073369 google/sentry: Add as a variant of glados
Add google/sentry (Lenovo Thinkpad 13 Chromebook) as a variant of
glados Skylake reference board:
- add sentry-specific DPTF, EC config, GPIO config, Kconfig,
    NHLT config, PEI data, VBT, SPD data, and devicetree
- add sentry-specific GPIO determination of which audio codec
    is present

Adapted from Chromium branch firmware-glados-7820.B, commit
b0c3efe54d877246d07f2467b2dff51cc30348fa [soc/intel/skylake: Enable VMX]

Test: build/boot google/sentry, verify correct functionality

Change-Id: I783422aedac8b7fc52098eebd05b2061a1011b60
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/27418
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-24 12:04:26 +00:00
Patrick Rudolph 4966a8c136 mb/hp/compaq_8200_elite_sff: Call NPCD378 sleep/wake handlers
* Call sleep and wake functions
* Add GBEs for wake

Change-Id: I0cf2cffd06fe2470c2a8f1d8b57de282362ec17e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-24 11:51:01 +00:00
Patrick Rudolph 9ae150a591 superio/nuvoton/npcd378: Add ACPI code for S3 resume
Configure SuperIO on shutdown to keep devices enabled, set green LED
to fading on sleep and normal on wake.
Add SSDT to write LDN4 IOBASE addresses stored in devicetree.cb.

Tested on HP8200:
* Wakes from power button or USB keyboard.
* LED is fading

Change-Id: I2035249a39616aa2d87bd93f9e49c70d231546cc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/27510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-07-24 11:50:52 +00:00
Tom Hiller 9990943782 Documentation: Add code_development_model.md to soc/intel/index.md
Fixes Sphinx WARNING document isn't included in any toctree

Change-Id: I956ed23d87c7cbd65383cc64a6af7161e90d6611
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24 09:12:37 +00:00
Tom Hiller ae3aaeb045 Documentation: Add Binary_Extraction.md to index.md
Fixes Sphinx WARNING document isn't included in any toctree

Change-Id: I4464da8abe7631ec97343059fd36dc96cc17ac12
Signed-off-by: Tom Hiller <thrilleratplay@gmail.com>
Reviewed-on: https://review.coreboot.org/27592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24 09:12:18 +00:00
Martin Roth 987d42da1d util/crosgcc: Fix most shellcheck errors in buildgcc
This fixes most of the simpler shellcheck errors in shellcheck 0.4.6.

There are still a few warnings left that weren't simple to fix or
would have required more testing before I was confident in them.

Change-Id: I79ab3614cc1d69d3dfe1e0374e930313f2011cbf
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24 09:11:48 +00:00
Martin Roth 234eabaa8d util/crosgcc/patches: update make-4.2.1 patches
- Add the Do-not-assume-glibc-glob-internals patch to fix segfaults.
- Update glob_interface_v2 patch to the patch directly from the
make git repository instead of translating it. This gives better
attributution to the original author.

Change-Id: Ibc936fc00925a4ca2170a6f5dca7c2b8d8d62f02
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24 09:09:42 +00:00
Martin Roth 21e09b1c15 Build system: Add fixes for scanbuild
- Exclude build flags that generate warnings when scanbuild is running
- Add the SCANBUILD_ARGS variable to abuild so we can pass in arguments
to scanbuild.
- Set the default scanbuild argument to -k (--keep-going) so that even
if an error occurs it continues with the scan.  This is similar to what
we do with coverity runs.

Change-Id: I82e7c13d7fd7432b43c17a31834ec82fca158a07
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/27595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-24 09:08:55 +00:00