tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The Makefile was passing `CONFIG_SMMSTORE_v2` which doesn't exist.
Correct this to `CONFIG_SMMSTORE_V2`.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I984d2155143c14cb4a347ed24688b9ea492f7f8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76317
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Fix regression introduced with commit 01af0f8ac8 ("acpi/acpi.c: Reduce boilerplate").
DSDT table is not to be listed within RSDT/XSDT, ACPICA and/or OSPM may
try load it twice raising conflicts in the namespace and effectively ignoring all or most of the AML.
Change-Id: I0e6d07b35522f2bf9a51cef0a7e3181b15087d88
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76321
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Always exit 4-byte addressing mode to prevent errors when the spi flash
is not left in 4-byte addressing mode.
TEST=boot with PSP releases that leave the flash in both 4-byte
and 3-byte mode and verify flash writes
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9884b85bc3b0a9b654a2cb91fb314b0869abd622
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76094
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
GPIO GPP_B5 is used as input on this mainboard. For a full-populated
DRAM configuration, the input signal is connected to ground and for a
half-populated configuration it is connected to 3.3 V.
BUG=none
TEST=Use different HW configurations and check coreboot log
GPP_B5 = 0:
[DEBUG] 2 DIMMs found
GPP_B5 = 1:
[INFO ] meminit_channels: DRAM half-populated
[DEBUG] 1 DIMMs found
Change-Id: I48b4a3bea7f1ff804b78b7c648a7ea1925627b8a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76245
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
There can be mainboard variants, which are only equipped with
half-populated DRAM. For this reason, the meminit parameter for
populatation should be adjustable. The default setting remains at
full-populated DRAM. At mainboard variant level a different selection
via individual input paths can be made.
Change-Id: I390bbfa680b5505bb2230fa0740720bd9dd1fafb
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76244
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Align implementation with real hardwares, such that ECAM
(PCI configuration via MMIO) is available for use when
console is initialised.
Change-Id: I288991f31d3f1678132aa4315168c09eabbbe98d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76206
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
At the time of writing SMM runtime does not make register
accesses to LAPIC registers, but such breakage has been
reported.
S3 resume failure, where OS switched back from X2APIC
to XAPIC mode, can be reproduced with a sandybridge SKU
that has VT-d disabled.
Change-Id: I300ba87c3d8fde548dbaf95703bd7e2fe54cff57
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Some ancient CPUs may have had LAPIC disabled at power-up, so
semantically enable_lapic() should always come before attempting
to access the register banks.
With X2APIC_ONLY option it is necessary to ensure enable_lapic()
is called prior to any other lapic register space accesses,
since the XAPIC mode MMIO accessors are optimised away build-time
and CPU's do not yet initialise for X2APIC mode at reset.
Change-Id: I96eaa5c43108c802375e184e0c68b5091ca0198f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76195
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
This devices is always present so hooking up the ops in devicetree makes
more sense.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I369129e365ce8596cad25b97d12168bb08e3ed0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76241
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
None of these boards have an RTC battery, so this option has no
effect. Remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9a55227f74c0b9ae9b56bdef4b8f53b2425b331c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
It is not needed, so remove it.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I606d0a76926e90e4ce321163400aa50ea961c2a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75342
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. K4U6E3S4AB-MGCL (Samsung)
2. K4UBE3D4AB-MGCL (Samsung)
BUG=b:289873670
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I7a262ac62c24cfb43c0283c9730c177a242342e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76240
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Rather than repeat the same line multiple times, save it in a variable
once and use that variable in the rest of the file.
TEST=timeless birman build identical
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I4eb262adb3bbda04add79b2e2b8bee9a609a1e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76197
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Pass the APOB NV address as a flash offset instead of x86 address.
TEST=boot birman and verify APOB_NV is working
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I0f710f12cc5d933a75840dbce1c4bad0c2ea04cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76162
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id 8be5a82:
2022-10-04 14:01:00 +0000 - (Fix "unnecessary with of ancestor [-gnatwr]")
to commit id 95ad8c5:
2022-12-22 15:32:38 +0000 - (hw-debug: Place global variables in the .bss section)
This brings in 1 new commits:
95ad8c5 hw-debug: Place global variables in the .bss section
Change-Id: Ib28dbcdf14f313cbfeab03e98e05fffe16a1b708
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75794
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Attempting to use X2APIC MSRs before the call to enable_lapic()
is made raises exception and double-faults.
Change-Id: Ib97889466af0fbe639bec2be730784acc015b525
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Updating some submodule pointers to their latest commit causes some
builds with default configuration to fail since all required components
don't fit into 2MB anymore. Specifically, this has been experienced with
the microcode and FSP submodules.
So, increase the default CBFS size to 4MB to make sure builds succeed
with updated submodules.
Change-Id: I2fc16240bef36c057608acadf3cb7c65e7f0d244
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
VP2420 (vault_ehl) has only 1 DIMM slot present. Set the DIMM_MAX to 1
to optimize the common libraries to not attempt to read and parse more
SPD than needed.
TEST=Boot Protectli VP2420 (vault_ehl) with different DIMMs and see
FSP is retraining the memory properly and fastboot is working.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I29a99f387ffe2df1060547e0818c5c5b66a27061
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73819
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set tcc_offset value to 20 in chipset for Thermal Control
Circuit (TCC) activation feature for meteorlake silicon.
Also, remove tcc_offset default value from rex baseboard
and variants.
BUG=b:270664854
BRANCH=None
TEST=Build FW and test on rex board
Change-Id: Ieec1b7e0873eef46a56e612ed1d9445019b1f4a9
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76232
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Set tcc_offset value to 10 in devicetree for Thermal Control
Circuit (TCC) activation feature for ovis.
BUG=b:270664854
TEST=Build and boot google/ovis.
Change-Id: I0ef626f6cc460f1b460297804b97038705efaf4c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch adds a power limit for Ovis with 28W Intel Meteor Lake
silicon.
Reference: Intel MTL-UH_Power_Map_Rev1p2, doc: 640982
BUG=b:289854108
TEST=Able to boot google/ovis with power limit being overridden as
appropriate to 28W.
Change-Id: I312c70720fd89261c53d5bd4f45236e829d6c790
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Currently, boards with ES2 silicon are unable to boot with crashlog
enabled because crashlog driver is unable to handle invalid data.
Temporarily disable the crashlog to unblock development until the issue
is fixed.
BUG=b:289749310
TEST=Able to boot to the OS on Screebo
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic63cf9cf5bfa2c92d8f2c5b13df2f23dc118b389
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76231
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Use IOMMU_CAP_BASE_[LO,HI] instead of magic values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7032d9f032a22649951ef1535f39b918eb8bd539
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie155cab1f659e9f7b64cd87ba8a77260056656d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76222
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
CBMEM can contain log in different forms (at most one is present):
- coreboot-specific format (CBMEM_ID_TPM_CB_LOG exported as
LB_TAG_TPM_CB_LOG)
- TPM1.2 format (CBMEM_ID_TCPA_TCG_LOG)
- TPM2 format (CBMEM_ID_TPM2_TCG_LOG)
The last two follow specifications by Trusted Computing Group, but until
now cbmem couldn't print them. These formats were added not so long ago
in:
- commit 4191dbf0c9 ("security/tpm: add TPM log format as per 1.2
spec")
- commit 53db677586 ("security/tpm: add TPM log format as per 2.0
spec")
These changes make cbmem utility check for existence of TPM1.2/TPM2 logs
in CBMEM and add code necessary for parsing and printing of their
entries.
TEST=`cbmem -L` for CONFIG_TPM1=y case
TCPA log:
Specification: 1.21
Platform class: PC Client
TCPA log entry 1:
PCR: 2
Event type: Action
Digest: 5622416ea417186aa1ac32b32c527ac09009fb5e
Event data: FMAP: FMAP
TEST=`cbmem -L` for CONFIG_TPM2=y case
TPM2 log:
Specification: 2.00
Platform class: PC Client
TPM2 log entry 1:
PCR: 2
Event type: Action
Digests:
SHA256: 68d27f08cb261463a6d004524333ac5db1a3c2166721785a6061327b6538657c
Event data: FMAP: FMAP
Change-Id: Ib76dc7dec56dd1789a219539a1ac05a958f47a5c
Ticket: https://ticket.coreboot.org/issues/425
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68749
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch enables BT offload feature for soundwire audio over SSP1.
BT mode is selected via FW_CONFIG and corresponding VGPIOs are
programmed.
BUG=b:275538390
TEST=build and verify BT offload on rex soundwire audio
Change-Id: I99df78787d9f54c91bcedf6f70352890a715cdb3
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75924
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Follow the Project_Uldren_Thermal_paramters_list_2023_0626.xlsx to
modify DPTF parameters and tcc_offset.
- Set tcc_offset to 3.
- Update Critical Policy trip point.
- Update Power Limits PL1 minimum step size to control limits (in mW).
BUG=b:282598257
BRANCH=firmware-nissa-15217.B
TEST=boot uldren to ChromeOS and pass thermal test.
Change-Id: Ic5bbb3aa3b036a1eae8a95f63b570db2dc6da978
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76105
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
In next phase, joxer will remove external fivr.
BUG=b:285477026
TEST=emerge-nissa coreboot and boot to OS, suspend/resume
work normally.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I7fd7ad90e1544966170df402243604379f5790db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76187
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
This reduces boilerplate. One functional difference is that SSDT no
longer has oem_revision set to 42.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Id2e54d61970294e028a61ba86c07c5482784e307
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Adding tables to R/XSDT, aligning current pointer, computing checksum is
a lot of boilerplate that needs to be done for each table.
TESTED on foxconn/g41.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: If4915b8cdfcfdbb34284ea75fa8a0fd23554152d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Phoenix is an x86 soc that supports sha256 instructions.
TEST=boot birman to chromeos
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id228399ba02708b97110d524ce12c2626588762d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76166
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Always send the Exit 4-Byte Address Mode (E9h) command before the first
access to the SPI flash in all stages when the SPI flash is
memory-mapped. This is useful for x86 mainboards that do not access SPI
flash in bootblock yet still need to exit 4-byte addressing mode in
romstage or ramstage.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3a62bfa44a0a5645c1bb80b32d0b9f92075c66bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Replace `CBFS_SIZE` with FMD files to declare regions and sizes. This
will be used to lock BIOS region (except SMMSTORE) on boot.
`CBFS_SIZE` was incorrectly set to 10 MiB, so this also corrects the
BIOS region size to match the FIT values.
Change-Id: I0f068f4d9b376f12b46faa5bb0c6a08e6cb744d8
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76155
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Fixes building when `USE_OPTION_TABLE` is selected.
Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Multiple users have requested to have the DMI values for product UUID
and serial number be populated. Enable the drivers so that we may set
them when flashing or updating firmware.
Change-Id: I710363d9df626d51756a265f0099f26ef28411c2
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
The Infineon chip occasionally fails Startup or Resume. Adding the
delay makes it work more reliably.
Change-Id: I4a8f98633154888e2167a3d55192b86e13ffcb62
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76095
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Grzegorz Bernacki