Most of these are leftovers from the initial copy from Baytrail.
Change-Id: I1c437f34902400022ac6a5e95ff6168545ca557f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
NIDs 0x18 and 0x19 are flipped, and the verbs for NID 0x1b are instead
applied onto NID 0x1a. Fix that, so that it matches original Chromium
sources for the boards.
Change-Id: I20cc4b282602f8557fa4f25489adf899b7460a09
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Looks like the subvendor verb for codec #3 is erroneously using zero as
its codec number. Fix that.
Change-Id: I760533c229287627dd0548a06300c376e045302c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Denary, also known as "decimal" or "base 10," is the standard
number system used around the world. Therefore, make use of it.
Change-Id: I7f2937bb7715e0769db3be8cb30d305f9d78b6f8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37849
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This is a initial mainboard code aimed to serve as base for
further mainboard check-ins.
This is a copy patch from icelake_rvp as on commit ID:
I64db2460115f5fb35ca197b83440f8ee47470761
Below are the changes done over the copy patch:
1. Rename "Icelake" with "Jasperlake".
2. Replace "icelake_rvp" with "jasperlake_rvp".
3. Rename "icl" with "jsl".
4. Remove unwanted SPD file, add empty SPD as
placeholder.
5. Replace "soc/intel/icelake" with "soc/intel/tigerlake"
as tigerlake SOC hosts jasperlake code as well.
6. Empty romstage_fsp_params.c, to fill it later with
SOC specific config.
7. Empty GPIO configuration, to be filled as per board.
8. Change copyright year to 2019.
9. Add two board support namely BOARD_INTEL_JASPERLAKE_RVP
and BOARD_INTEL_JASPERLAKE_RVP_EXT_EC
10. Replace icl_u and icl_y variant with jslrvp variant.
11. Remove basebord gpio.c and rely on variant override.
12. Remove HDA verb table and config support.
Changes to follow on top of this:
1. Add correct memory parameters, add SPDs.
2. Clean up devicetree as per jasperlake SOC.
3. Add GPIO support.
4. Update chromeos.fmd to make 10MB BIOS region.
TEST=Build jasperlake rvp board
Change-Id: I3314215807959b7348b71933fbba98e6487c0632
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Let coreboot know there is a NIC device on the end so
that the mac from vpd is set at early boot.
Properly configure the link-leds in devicetree s.t.
valid values are written out to the register at initialization.
BUG=b:146592075,146999042,146999043
BRANCH=none
TEST=Boot to kernel.
Insert mac address into VPD
vpd -s ethernet_mac=<address>
reboot the system.
Ensure we have ip address and corresponding mac
address with ifconfig.
Ensure ethernet controller shows up with lspci.
Change-Id: I76ce6d8a5a26842fcb2544ee96567fe0da8603b1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
I used register names guessed on what the registers do, since the SNB
documentation marked those registers as reserved; the IVB documentation
(326765-005) has names for the registers, so I'll use those.
Change-Id: I2f1194438a56546d9836dd12635d064a900a2fd8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38008
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove commented-out entries in dsdt.asl, and then remove files that do
not get built.
Change-Id: I579e7ffbc2d6596fd7ffe6863ff3b3fb14b0ade6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
To print times with 1 us resolution just adds unnecessary noise
when comparing logs across different boots. Furthermore, just
the printk itself is 1 ms if some slow console is enabled.
Change-Id: Ibea43124a1937f404a6e71fd9431086b2b72290a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For each boot_state, report the times spent interleaved
with other console output and remove the samples arrays.
The time spent to report the times to console is not
accounted for.
Change-Id: I0c847da98901c56b356b4a933d9ae865dada98b6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Now that romcc is gone, move cmos_post_init() into post.c, and remove
some preprocessor workarounds.
Change-Id: I0ee4551e476cdd1102e86e7efc74d5909f64a37b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Don't initialize fields with zeroes since gnvs structs were zeroed out
in southbridge already. See
* src/southbridge/intel/*/lpc.c
Change-Id: I5228f2cdc94df722ffa687c45b4e4fd25e82df82
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The gnvs structure was zeroed out before calling acpi_create_gnvs(...)
in the following files:
* src/southbridge/intel/*/lpc.c
Change-Id: Id7755b1e4b8f5cb8abd1f411b5dc174b6beee21c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37956
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After C_ENVIRONMENT_BOOTBLOCK became mainstream, coreboot build system
starts to produce larger bootblock, conflicting with former default
offsets.
This change makes these offsets configurable before building, with
default values lower than before, to better fit the larger bootblock.
Change-Id: Ie022663a4d0df7f431865b55f7329a9ebb90863b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37778
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Recent changes to the Atmel touchscreen driver in the mainline
kernel broke functionality with devices running upstream coreboot,
due relying on another driver (chromeos_laptop) which makes the
assumption that the i2c devices are be in PCI mode (as with the
stock Google firmware) rather than in ACPI mode as they are in
upstream coreboot.
Mitigate this by adding the required devicetree property so the
Atmel toushcreen driver will correctly attach without the use
of chromeos_laptop.
Test: build/boot peppy on 4.18+ kernel, verify touchscreen working
Change-Id: I05df8367886eef55b409590f75a68d98d4e5fbdf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicolò
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Provide the PM1_TMR information in the FADT even if PmTimerDisabled is
set because PM timer emulation is enabled via MSR 121h so the timer will
still work and can be used by things like Tianocore and Windows.
Porting from 662b6cb3ed (soc/intel/skylake: Always add PM1_TMR block to FADT).
Change-Id: Ie3d592623f3a84051477ffe83a0cf0daf30dd36f
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Previously, each Intel chipset had its own sleepstates.asl file.
However, this is no longer the case, so drop these comments.
Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Angel Pons