In order to pass DB type-C USB2 eye diagram, DB USB2 PHY register needs
to be overridden.
port#1
PortUsb20Enable=1
Usb2PhyPetxiset=7
Usb2PhyTxiset=7
Usb2PhyPredeemp=3
Usb2PhyPehalfbit=0
BUG=b:169105751
Signed-off-by: nick_xr_chen <nick_xr_chen@wistron.corp-partner.google.com>
Change-Id: If076c644783fa2992ac062d6469f9c49e6d5ff24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Adds a new port for the Aspire G43T-AM3. It is from an Aspire M3800
desktop model of which I only own the mainboard. The silkscreen label
calls it "G45T/G43T-AM3 V:1.0". In DMI data it is additionally called
Acer EG43M.
The Aspire M5800 model seems to use the same mainboard. The BIOS you can
download from Acer is identical for both.
Various similar mainboards by Acer exist: G41T-AM, G43T-AM, G43T-AM4,
Q45T-AM, to name a few. ECS has some models that are obiously based on
the same design, e.g. G43T-WM and G43T-M.
This model is a microATX-sized board with an LGA 775 socket, four DDR3
DIMM slots, one PCIe x16 slot, one PCIe x1 slot and two PCI slots based
on the Intel G43 chipset.
The port was started by copying mb/intel/dg43gt (not going to lie here)
and adapting things by looking at dumps from the system when running
with the vendor BIOS. Serial console output is possible by soldering to
a point at the corresponding Super I/O pin.
The service manual for the board was helpful for setting the correct PCI
IRQ links. It can be found publicly on the internet as the "Acer Aspire
M3800 Service Manual".
Working:
- CPUs from Pentium Dual-Core E2160 to Core 2 Quad Q9550 at FSB1333
- Native raminit
- All four DIMM slots at 1066 MHz (tested 2x2GB + 2x4GB)
- PS/2 mouse
- PS/2 keyboard (needs CONFIG_SEABIOS_PS2_TIMEOUT, tested: 500)
- USB ports (8 internal, 4 external)
- All six SATA ports
- Intel GbE
- Both PCI ports with various cards (Ethernet, audio, USB, VGA)
- Integrated graphics (libgfxinit)
- HDMI and VGA ports
- boot with PCIe graphics and SeaBIOS
- boot with PCI VGA and SeaBIOS
- Both PCIe ports
- Flashing with flashrom
- Rear audio output
- SeaBIOS 1.14.0 to boot slackware64
- SeaBIOS 1.14.0 to boot Windows 10 (needs VGA BIOS)
- Temperature readings (including PECI)
- Super I/O EC automatic fan control
- S3 suspend/resume
- Poweroff
Not working:
- Resource issues with the VGA BIOS of a PCI rv100-based card
- Super I/O voltage reading conversions
Untested:
- The other audio jacks or the front panel header
- On-board Firewire
- EHCI debug
- VBT (was extracted and added, but don't know how to test)
- Super I/O GPIOs
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Change-Id: I846cf5f4f1ef27fc644676a4c6f7a333e061f6cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add DTT (Dynamic Tuning Technology) support for Tiger Lake based rvp board.
Set power limits and CPU sensor thresholds for DTT based thermal control.
BRANCH=None
BUG=None
TEST=Build and boot on tglrvp board
Change-Id: I0dbee370b8dc9e1e3ae6f1a1101047ac6fd76f53
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
For mainboards using the HP KBC1126 EC interface, but with a different
EC implementation, we don't put the EC firmware in the CBFS image. Add
a Kconfig option to prevent the build system warning on not inserting
the EC firmware.
After this change, building coreboot for EliteBook Folio 9480m will
not have a warning on not inserting the EC firmware.
The build system still builds a working coreboot image for EliteBook
2560p, and gives a warning if not choosing to insert the EC firmware.
Change-Id: I3be83a13d138d3623064ef2803f3e3a340207ead
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With commit f2eb687d19 (soc/intel/{cnl,icl,skl,tgl,common}: Make
changes to send_heci_reset_req_message()) the return value was
changed on a single path. Update the other paths too, even though
it's the discouraged 0-is-failure.
Change-Id: I179a6a4b1e13565dd58c908eb2a9725052a4de9d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
update the telemetry setting for second SDLE testing(for APU power adjusting).
Those values are used to power calibration the APU power and achieving
the best performance.
BUG=b:160698427
BRANCH=zork
TEST=emerge-zork coreboot
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I4cf5b8f090befd6a3c4990f44f2f200bc66aa1f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44804
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Coverity detects calling function spi_sdcard_do_command without checking
return value. Fix this issue by checking return value for error
handling.
Found-by: Coverity CID 1407737
TEST=None
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ie0d28806b5c0b4c6d509e583d115358864eeff80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Current implementation uses CPUID 0Bh function that returns the number
of logical cores of requested level. The problem with this approach is
that this value doesn't change when HyperThreading is disabled (it's in
the Intel docs), so it breaks generate_cpu_entries().
- Use MSR 0x35 instead, which returns the correct number of logical
processors with and without HT.
- Rename the function to get_logical_cores_per_package, which is more
accurate.
Tested on ThinkPad X220 with and without HT.
Related to CB:29669.
Change-Id: Ib32c2d40408cfa42ca43ab42ed661c168e579ada
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
These parts have not been used in any vilboz devices. Removing
so IDs can be assigned more efficiently.
Command to generate files:
go build gen_part_id.go
local variant=vilboz
./gen_part_id ../../../src/mainboard/google/zork/spd ../../../src/mainboard/google/zork/variants/${variant}/spd/ ../../../src/mainboard/google/zork/variants/${variant}/spd/mem_parts_used.txt
BUG=b:165611994
TEST=none
Change-Id: I99614acaf45db0556120c883577494d9f753ea12
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45679
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add memory part H5ANAG6NDMR-XNC. Attributes are derived from data
sheets.
BUG=b:165611994
TEST=Compared generated SPD with data sheets and checked in SPD
Change-Id: Ifdcc7536441e9f0b94543c6f06fe466596f752dc
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Morphius has SSD/eMMC SKU, we should turn off eMMC
if storage is NVMe SSD.
BUG=b:169211959
BRANCH=zork
TEST=1. emerge-zork coreboot
2. Check eMMC is enabled or disabled based on the eMMC bit in
FW_CONFIG.
Change-Id: I67d5d77ce3d827ae89b82529de59925f67eaf894
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45755
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
While we're at it, fix up cosmetics on a few comments. The GADD method
seems to suffer from copy-paste symptoms. A follow-up will address this.
Some methods deliberately remain untouched in this commit, so as not to
collide with another patch train that already takes care of them.
Tested with BUILD_TIMELESS=1, Intel Ice Lake U RVP does not change.
Change-Id: I613f5f65638b92ca23f3ce15a15dd063afa52c31
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
While we're at it, fix up cosmetics on a few comments.
Some methods deliberately remain untouched in this commit, so as not to
collide with another patch train that already takes care of them.
Tested with BUILD_TIMELESS=1, Purism Librem 15v4 does not change.
Change-Id: Ib27c5b48459e3ea7eabc34457cb204994ee9b617
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45691
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch moves gpio_op.asl into common block acpi directory to
avoid duplicating the same ASL code block across SoC directory.
TEST=Able to build and boot TGL, CNL and CML platform.
1) Dump and disassemble DSDT, verify all methods present inside
common gpio_op.asl like GRXS, GTXS etc. are still there.
2) Verify no ACPI error seen while running 'dmesg` from console.
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Change-Id: I248f5e66994d2f3d6b0bd398347e7cf9ae7f2cc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
TEST=Able to build and boot EVE platform.
1) Dump and disassemble DSDT, verify unified methods like GRXS,
GTXS etc. are there
2) Verify no ACPI error seen while running 'dmesg' from console
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: I02df3ddf5ad33d42d97feefb0fa366ad8c856565
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45681
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
TEST=Able to build and boot ICLRVP platform.
1) Dump and disassemble DSDT to ensure GRXS function implementation
remain unchanged prior and after this CL.
2) Verify no ACPI error seen while running 'dmesg' from console.
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: Iab4690341bc3da5d8eb249da4d407d84f7d4e706
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45680
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Also drop gpio_common.h in favor of intelblocks/gpio_defs.h macros.
TEST=Able to build and boot CNL and CML platform.
1) Dump and disassemble DSDT, verify unified methods like GRXS,
GTXS etc. are there.
2) Verify no ACPI error seen while running 'dmesg' from console.
3) abuild --timeless to ensure there are no other functional changes.
Change-Id: I78d712eeba56b9c098dc6a6f11e4e51cb2529b10
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45654
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch ensures that GRXS perform PAD_CFG0_RX_STATE mask first
and then right shift PAD_CFG0_RX_STATE_BIT to get correct GPIO number.
Change-Id: I96611936f70f79e9dc5ee9414ec68cef00d0d13a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45738
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
BOOTBOOT is a multi-platform, architecture agnostic boot protocol.
The protocol describes how to boot an ELF64 or PE32+ executable inside
an initial ram disk image into clean 64 bit mode. This version uses
libpayload to do that. Depending on the lib's configuration, initrd
can be in ROM as a cbfs file or a Flashmap partition; on disk a GPT
partition or a file on a FAT formatted ESP partition.
For more information see https://gitlab.com/bztsrc/bootboot
Change-Id: I8692cde0730338026a7760a293c1e37f66004bc0
Signed-off-by: Zoltan Baldaszti <bztemail@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
With MAX_CPUS==1, this has the effect of removing spinlock
implementation. But since is_smp_boot() evaluates false and
SMM uses separate smi_semaphore, there is no concurrency to
protect against with a spinlock.
Change-Id: I7c2ac221af78055879e7359bd03907f2416a9919
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Looks like the option is generally not compatible with
garbage collections. Nothing is inlined, is_smp_boot()
no longer evaluates to constant false and thus the symbols
from secondary.S would need to be present for the build
to pass after we set SMP=n.
Change-Id: I1b76dc34b5f39d8988368f71a0a2f43d1bc4177e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43817
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The config string is HAVE_SPD_IN_CBFS, without the "BIN".
Signed-off-by: Paul Fagerburg <pfagerburg@google.com>
Change-Id: I728f64b2dd93b0e3947983b9b3701e185feff571
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45739
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Nearly every x86 platform uses the same arch for all stages. The only
exception is Picasso. So, factor out redundant symbols from the rest.
Alder Lake is not yet complete, so it has been skipped for now.
Change-Id: I7cff9efbc44546807d9af089292c69fb0acc7bad
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Though only one platform uses it, this will save some redundancy.
Change-Id: Ic151efe5dd9b7c89f779ac3e10c3a045f07221d3
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This adds eMMC preset settings.
It also fixes some formatting and a comment.
BUG=b:159823235
TEST=Build test
Cq-Depend: chrome-internal:3251807
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic5caff594157e03d792b999ca60274cf53c708e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45096
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add code to generate p-state and c-state SSDT objects to coreboot.
Publish objects generated in native coreboot, rather than the ones
created by FSP binary.
BUG=b:155307433
TEST=Boot morphius to shell and extract and compare objects created in
coreboot with tables generated by FSP. Confirm they are equivalent.
BRANCH=Zork
Change-Id: I5f4db3c0c2048ea1d6c6ce55f5e252cb15598514
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Align groups of definitions, reflow long lines and adjust whitespace.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO remains identical.
Change-Id: I75723fe087ef16f74ca93f6faa4d3468d7958a5c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45420
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
It primarily contains definitions for MMIO windows. Also, remove
includes from files not directly using the definitions it contains.
Tested with BUILD_TIMELESS=1, Asus P5QL PRO remains identical.
Change-Id: Id28080d9b2924463dd3720492d5e717d65fa0071
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45419
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There's no need to have implementation details in a public header.
Tested with BUILD_TIMELESS=1, Foxconn D41S remains identical.
Change-Id: I0bfd6ee72347249302ee073081f670b315aa40e4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Align groups of definitions, reflow long lines and adjust whitespace.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: I2969274c6b50f56994e45ada5d016504addfc13e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45434
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>