Let coreboot know there is a NIC device on the end so
that the mac from vpd is set at early boot.
Properly configure the link-leds in devicetree s.t.
valid values are written out to the register at initialization.
BUG=b:146592075,146999042,146999043
BRANCH=none
TEST=Boot to kernel.
Insert mac address into VPD
vpd -s ethernet_mac=<address>
reboot the system.
Ensure we have ip address and corresponding mac
address with ifconfig.
Ensure ethernet controller shows up with lspci.
Change-Id: I76ce6d8a5a26842fcb2544ee96567fe0da8603b1
Signed-off-by: Edward O'Callaghan <quasisec@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38003
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
I used register names guessed on what the registers do, since the SNB
documentation marked those registers as reserved; the IVB documentation
(326765-005) has names for the registers, so I'll use those.
Change-Id: I2f1194438a56546d9836dd12635d064a900a2fd8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38008
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove commented-out entries in dsdt.asl, and then remove files that do
not get built.
Change-Id: I579e7ffbc2d6596fd7ffe6863ff3b3fb14b0ade6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
To print times with 1 us resolution just adds unnecessary noise
when comparing logs across different boots. Furthermore, just
the printk itself is 1 ms if some slow console is enabled.
Change-Id: Ibea43124a1937f404a6e71fd9431086b2b72290a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37425
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
For each boot_state, report the times spent interleaved
with other console output and remove the samples arrays.
The time spent to report the times to console is not
accounted for.
Change-Id: I0c847da98901c56b356b4a933d9ae865dada98b6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Now that romcc is gone, move cmos_post_init() into post.c, and remove
some preprocessor workarounds.
Change-Id: I0ee4551e476cdd1102e86e7efc74d5909f64a37b
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Don't initialize fields with zeroes since gnvs structs were zeroed out
in southbridge already. See
* src/southbridge/intel/*/lpc.c
Change-Id: I5228f2cdc94df722ffa687c45b4e4fd25e82df82
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The gnvs structure was zeroed out before calling acpi_create_gnvs(...)
in the following files:
* src/southbridge/intel/*/lpc.c
Change-Id: Id7755b1e4b8f5cb8abd1f411b5dc174b6beee21c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37956
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
After C_ENVIRONMENT_BOOTBLOCK became mainstream, coreboot build system
starts to produce larger bootblock, conflicting with former default
offsets.
This change makes these offsets configurable before building, with
default values lower than before, to better fit the larger bootblock.
Change-Id: Ie022663a4d0df7f431865b55f7329a9ebb90863b
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37778
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Recent changes to the Atmel touchscreen driver in the mainline
kernel broke functionality with devices running upstream coreboot,
due relying on another driver (chromeos_laptop) which makes the
assumption that the i2c devices are be in PCI mode (as with the
stock Google firmware) rather than in ACPI mode as they are in
upstream coreboot.
Mitigate this by adding the required devicetree property so the
Atmel toushcreen driver will correctly attach without the use
of chromeos_laptop.
Test: build/boot peppy on 4.18+ kernel, verify touchscreen working
Change-Id: I05df8367886eef55b409590f75a68d98d4e5fbdf
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicolò
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Provide the PM1_TMR information in the FADT even if PmTimerDisabled is
set because PM timer emulation is enabled via MSR 121h so the timer will
still work and can be used by things like Tianocore and Windows.
Porting from 662b6cb3ed (soc/intel/skylake: Always add PM1_TMR block to FADT).
Change-Id: Ie3d592623f3a84051477ffe83a0cf0daf30dd36f
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Previously, each Intel chipset had its own sleepstates.asl file.
However, this is no longer the case, so drop these comments.
Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Timeless build results in identical image for X230.
Change-Id: I36842ebd4917e96aa8aec87ba13d27bd4bf44b76
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Timeless build results in identical image for X230.
Change-Id: Ia2bd26b97cb2ae77f29d8978f62d2f6be12b43e1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This patch didn't change the resulting binary for an X230 when using
TIMELESS_BUILD=1
Change-Id: Ibeb10c3e0c04dec76892a86fa39e60543b2ee2f5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Assume that LIMIT_POWER is not requested if the ec does not support it.
Do this by checking the command code in the response message instead
of return value.
BUG=b:146165519
BRANCH=None
TEST=Boot puff with EC which does not support LIMIT_POWER param.
Change-Id: Ib2f5f69a53f204acebfab3e36aab2960eeec1204
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Don't initialize fields with zeroes since gnvs structs were zeroed out
in southbridge already.
Change-Id: I2ccf4699ba3ed3f5b9402c0340153d4a5bf82682
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
When checking that command and data fit in the FIFO, don't count the first
byte. The command doesn't go through the FIFO.
TEST=confirm error (4+68>71) goes away on Mandolin
BUG=b:146225550
Change-Id: Ica2ca514deea401c9c5396913087e07a12ab3cf3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Martin Roth <martinroth@google.com>
free() is not needed since the memory is not dynamically allocated.
Change-Id: I90659722aaca6ced1e1cbc3db4180b0811205e95
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The gnvs structure was zeroed out already in the following files:
* src/southbridge/intel/i82801ix/lpc.c (t400 and x200)
* src/southbridge/intel/i82801gx/lpc.c (thinkcentre_a58)
Change-Id: Id7d552e1c4084a0b36b98f9627a85a75c8b90e81
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
create_coreboot_variant.sh now supports the Volteer baseboard in
addition to Hatch. The shell script and supporting python code are
moved up one level, while retaining the ${BASE}/template/* file
structure for each supported baseboard.
kconfig.py has to add slightly different text to Kconfig.name
depending on which baseboard is selected.
BRANCH=None
BUG=b:146646594
TEST=Create variants of Hatch and Volteer, check that the staged
commits are correct.
$ ./create_coreboot_variant.sh hatch sushi b:12345
src/mainboard/google/hatch/Kconfig and Kconfig.name will have new
sections for SUSHI. src/mainboard/google/hatch/variants/sushi
will have a copy of util/mainboard/google/hatch/template
$ ./create_coreboot_variant.sh volteer ripto b:12345
src/mainboard/google/volteer/Kconfig and Kconfig.name will have new
sections for RIPTO. src/mainboard/google/volteer/variants/ripto
will have a copy of util/mainboard/google/volteer/template
Also run the script with an existing board name to verify that you
can't create a variant that already exists.
Change-Id: I084b6c50bb76af0d11dc86a96b3c3c434569a0dd
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
We found the driver binding failure issue could be cleared with 100ms
of "reset_delay_ms". Needs further check with device vendor, anyway it
seems the IC need some time before communication after de-assertion of
reset.
BUG=b:129159369
BRANCH=firmware-hatch-12672.B
TEST=Verified driver bound successfully.
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Change-Id: Iccb33c13c9a390a2c971325c74c0c4ad4b08618e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
There are no symmetrical headerfiles for other arch/ and
after ROMCC_BOOTBLOCK and walkcbfs() removal this file
ended up empty.
Change-Id: Ice3047630ced1f1471775411b93be6383f53e8bb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>