Bipship is a sustaining project of Blooguard.
SAR value follow Blooguard.
BUG=b:149414960
BRANCH=octopus
TEST=build and verify load correct SAR value by sku-id
Change-Id: Ic45ed10fc147401d4278f1811a86cd2b2e4c63ac
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Turn on the H1 device in the devicetree. Configure the concerned GPIOs
and enable the required config items.
BUG=None
TEST=Build the mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I37972635454cd0d35608623e7be4110012ace658
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38772
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Remove blank line to maintain the relation between the previous comment and
the remainder of the block.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: Ib9754c6723ecd5e4895898490fc7228e1c3839d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38821
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The is_smm_enabled is not necessary because it is done previously
in this code path.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I20d50acbea891cb56ad49edc128df25d21c5f1ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38820
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Initial testing of STM support revealed a sizing issue for greater than 4 threads.
This patch reduces the STM smm_save_state_size, which should allow for 24 threads.
Signed-off-by: Eugene D. Myers <edmyers@tycho.nsa.gov>
Change-Id: I025694185469577e072a92ea75cbbb53c24b2c24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38819
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add EC ACPI reporting of current temp and platform critical temp.
Adapted from ACPI dump of ODM AMI firmware.
TEST: check reporting of current/critical temps via lm-sensors
from ACPI on Librem 13v1 and 13v4 boards.
Change-Id: I92641fbbdda46e0c388607a37f7a7cc2dcd6c26d
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This reverts commit a017e5fb3d.
Reason for revert: The extra reset in the FSP after the flex ratio is changed causes recovery reasons to be lost. There are some vboot changes that recently landed that could help with this issue, but for now, we are working on a new AU image for Kohaku and this is causing our automated testing to fail.
Change-Id: Ic38b390842e2a533033587b3247b7c8d982b1dff
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Added CMOS support for MacBook Air 4,2. In future, I hope there will
be more useful options available, because I'm working on macbooks
support.
Also, it may be necessary for hyper_threading support (#29669) once it
will be ready.
Change-Id: I369ed9aeff2098a4840918531be6a34cfc8d2a1e
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Make sure the Skylake comment refers to the correct BWG paragraph and
update the text for all.
BUG=N/A
TEST=build
Change-Id: Id383f200e079bdb91cea2240bd7a957d723a7b89
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
DMI PCR 2770 (LPC IO DECODE RANGES) should be identical to LPC PCI
offset 0x80. This is specified in PCH BWG par 2.5.1.5.
Add the support to make sure this PCR is always set correctly.
BUG=N/A
TEST=tested on facebook monolith.
Change-Id: I33ff2b96dea78b5ff1c7c9416cf74f67d79f265d
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38746
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
With CL:1940398, this option is no longer needed. Recovery
requests are not cleared until kernel verification stage is
reached. If the FSP triggers any reboots, recovery requests
will be preserved. In particular:
- Manual requests will be preserved via recovery switch state,
whose behaviour is modified in CB:38779.
- Other recovery requests will remain in nvdata across reboot.
These functions now only work after verstage has run:
int vboot_check_recovery_request(void)
int vboot_recovery_mode_enabled(void)
int vboot_developer_mode_enabled(void)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I52d17a3c6730be5c04c3c0ae020368d11db6ca3c
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38780
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Serves two purposes:
(1) On some platforms, FSP initialization may cause a reboot.
Push clearing the recovery mode switch until after FSP code runs,
so that a manual recovery request (three-finger salute) will
function correctly under this condition.
(2) The recovery mode switch value is needed at BS_WRITE_TABLES
for adding an event to elog. (Previously this was done by
stashing the value in CBMEM_ID_EC_HOSTEVENT.)
BUG=b:124141368, b:35576380
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I30c02787c620b937e5a50a5ed94ac906e3112dad
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Jasper Lake SOC has 8 PCIe root ports. Cleaning up the root ports
as per Jasper Lake. This patch updates the devicetree to enable WLAN
and NVME for jasperlake_rvp and removes the other root port configurations
which are not required.
Change-Id: I6c801d81ccece6b45a7c45212533bb33a6805367
Signed-off-by: Usha P <usha.p@intel.com>
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38679
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
ACPI files for xhci in JSL is different from TGL. Hence, renaming
xhci.asl to xhci_tgl.asl and adding a new file xhci_jsl.asl for JSL.
Also, allowing xhci.asl to choose the correct file based on the SoC
selected.
BUG=None
BRANCH=None
TEST=Compilation for JasperLake board is working
Change-Id: Ia8e88e02989ff80d7cd1f28941e005cb0d842fcb
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
SUART3/4 are unused on this board (verified by checking registers on
vendor BMC firmware). Further they break the console for an unknown
reason. Thus disable them.
Change-Id: I30bb8184d03ee1037d9ec33eb1d93ee540563fc5
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38818
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
SUART3/4 are unused on this board (verified by checking registers on
vendor BMC firmware). Thus drop the remaining settings.
Change-Id: I2ababd92fcd7016c508aa3119e798f75eeb90a1c
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38817
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
These header files need to make use of vb2_shared_data.
Remove the last vestiges of vboot1 data structures in coreboot.
BUG=b:124141368, chromium:1038260
TEST=Build locally with CL:2054269
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I61b27e33751c11aac9f8af261a75d83b003b5f92
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38884
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
X11SSM-F has a different board id (0896) than X11SSH-TF (089C). Use the
right id for the right board.
Change-Id: Ib0d5e66ce1a973f29a1da78f04f7ef677b260cd8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
The variable is never read before being assigned a value at the end of
the function.
Change-Id: I3b42dcd564480005b2c520316933940d87b6e418
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38785
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
GNU Make 4.3 is more picky about the $(spc) definition. It seems, the
variable ends up empty. The old definition worked for nearly 8 years,
RIP.
Tested with GNU Make 4.2.1 and 4.3.
Change-Id: I7981e0066b550251ae4a98d7b50e83049fc5586a
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38790
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The body contains a `#` and GNU make 4.3 disagrees with earlier versions
if it should be treated as a comment. Turn it into a `define` which has
clearer semantics regarding comments (interpretation is supposed to be
deferred until the variable is expanded).
Change-Id: I589542abbd14082c3ecc4a2456ebd809fb6911ea
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38793
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Interpretation if # starts a comment inside a variable definition varies
between GNU make versions. Use a wildcard to match the first # and use
`sed` instead of `grep | cut` to avoid unbalanced quoting chars.
Tested with GNU make 4.2.1 and 4.3. Both produce the same output as
4.2.1 did before the patch.
Change-Id: Ib7c4d7323e112968d3f14ea0590b7dabc57c9c45
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
* Add additional information on non-debian cli tools
* Improve spellings and descriptions to the best of my knowledge
Adding info about needed tools in other distribution's package
managers was requested at the coreboot beginner's workshop at 36C3.
Change-Id: Ifff3c8354b4bec9f195f075eb6b2f377195fc237
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38225
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Calculate the correct MMCONF size, which was only correct for
256MiB, but not for smaller values.
Tested on HP Z220:
Fixes "Not using MMCONF" warning in dmesg.
Change-Id: I986681126637c28f6442ab7c34acea5bb58ea3d2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38830
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathan Kollasch <jakllsch@kollasch.net>
* Use new ACPI syntax
* Return either 0 or 0xf for PCI root port. That will make the
device show up in Windows. This might help users and possibly
Windows drivers working with PCIe ports.
Change-Id: I1e76b735ab1472f6a4ea493c733cd6b2e6fca29e
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38831
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
By updating the FSP submodule we now got all FSP headers from within
that repo. This commit changes the default paths to use these and
fixes some include paths to allow the usage of
vendorcode/intel/edk2/UDK2017 together with the official Intel
distribution.
We are also adding back the CHANNEL_PRESENT enum, that is
missing in the official headers.
This was tested on the Razer Blade Stealth (late 2019).
Change-Id: I7d5520dcd30f4a68af325125052e16e867e91ec9
Signed-off-by: Johanna Schander <coreboot@mimoja.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37579
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Christoph Pomaska <github@slrie.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some of the common memory code that was being performed in
mainboard has moved into the soc to reduce redundant code.
This change adapts volteer to use Tiger Lake's new common code.
BUG=b:145642089, b:145238504, b:145564831
BRANCH=none
TEST="emerge-volteer coreboot chromeos-bootimage", flash and boot
volteer, boot to kernel, "cat /proc/meminfo" and verify it reports
"MemTotal: 8038196 kB".
Change-Id: I32c9b8a040728d44565806eece6cf60b6b6073b6
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The Picasso no longer intends to implement a hybrid romstage,
opting instead for a more traditional bootblock/romstage/ramstage.
Update the documentation to reflect this. Clarify additional
details that have come to light since the last revision.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I6c98c007ddb8a4a05810f19e4215bde719de7bb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
When acpi_write_dbg2_pci_uart is called and no pci uart is available the
function prints "Device not found" as an error. This is not correct.
Change the error level to BIOS_DEBUG so coreboot reports the device is
not available but doesn't flag this as an error.
BUG=N/A
TEST=build
Change-Id: I14567bcfcf5a6ff427e418d15bc2675ae7a28f53
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Add function to return the fixed io decode ranges contained in register
0x80 of the LPC interface.
BUG=N/A
TEST=build
Change-Id: Ie46d7c9d7a399a8489c030d906f75ba61db19cc4
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38745
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We haven't been able to update IASL in 8 months because of this
conflict. Ignoring it doesn't make things any worse than they are now.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iced2e55e9f2aa7a262a5c1ffeff32af78acfa35e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
To be compliant with ACPI specification, device object requires either
a _HID or _ADR, but not both.
Change-Id: I45cf2b8d455aa4d288de1ac53cf9ae801f758a9a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38351
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It's really hard to power up this laptop with the lid closed so let's
make it open by default, as done on many other laptops.
Change-Id: I5bb2f716865c2bb569a4735f135842526043713c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37985
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This patch guards CONFIGURABLE_RAMSTAGE symbol (which is default
enable for all x86 systems) with another Kconfig that can be selected
by platform that actually planning to use it.
TEST=CONFIG_CONFIGURABLE_RAMSTAGE is not enabled by default.
Change-Id: I2113445d507294df59fbc7fb1373793b47c6c31c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Part of the design of vboot persistent context is that the workbuf gets
placed in CBMEM and stays there for depthcharge to use in kernel
verification. As such, the space allocated in CBMEM needs to be at least
VB2_KERNEL_WORKBUF_RECOMMENDED_SIZE.
In the VBOOT_STARTS_IN_ROMSTAGE case, prior to this CL, vboot_get_context()
would get invoked for the first time after CBMEM comes up, and it would
only allocate VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE.
Initialize the workbuf directly in vboot_setup_cbmem() instead with the
correct VB2_KERNEL_WORKBUF_RECOMMENDED_SIZE.
BUG=b:124141368, chromium:994060
TEST=make clean && make test-abuild
TEST=boot on GOOGLE_EVE with VBOOT_STARTS_IN_ROMSTAGE set
BRANCH=none
Change-Id: Ie09c39f960b3f14f3a64c648eee6ca3f23214d9a
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38778
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Selecting STM on an arbitrary platform would likely result in a brick,
so let's hide the prompt by default.
Change-Id: I50f2106ac05c3efb7f92fccb1e6edfbf961b68b8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: <cedarhouse1@comcast.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
If the panel-power sequencer is not configured, libgfxinit falls back
to very conservative defaults (210ms before EDID is probed). This
results in a boot penalty of >100ms (depending on how long it takes
to probe other ports).
Values are taken from the VBTs already checked in. Untested.
Change-Id: I189776ce8684b4c3c01acd6d2fc433ca33a050d5
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tony Huang