The sub-process calls break make's dependency tracking, hence we have
to always perform the calls if we want to allow automatic, incremental
builds.
We let each rule depend on a new, phony target `force-payload`. It has
roughly the same effect as tagging all the targets as phony, but doing
so would feel wrong as some of them are actual files.
Change-Id: I1bc2406db371e8dddbfdf71f68a6665a5b558f5e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The new `Makefile.payload` can be included by the Makefiles of pay-
loads for in-tree builds. The basic idea is to use libpayload's
build results without the `make install` step, and to ensure that
incremental builds work. For instance, if libpayload's code changes,
a `make` for the payload would automatically update the libpayload
build and rebuild the payload. But if there are no code changes in
libpayload, only updated files of the payload will be re-built.
The configuration of libpayload is supposed to be automatically
generated from a `defconfig` file. If this `defconfig` changes,
libpayload and the payload will be re-built.
Change-Id: If5319f1bf0bcd09964416237c5cf7f8e59f487a2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47633
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot's Makefile exports a lot of variables that influence make sub-
processes (e.g. for Kconfig). We don't want these variables leak into
sub-processes for (lib)payload builds, hence unexport them.
Change-Id: I8da2d8db6238d456723b9c22bee80c62e97027b0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48940
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot's Makefile exports a lot of variables that influence make sub-
processes (e.g. for Kconfig). We don't want these variables leak into
sub-processes for (lib)payload builds, hence unexport them.
Change-Id: I7d65c0aa6d4550bd6600c437e838339af69496da
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48939
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
FILO's Makefile will check for libpayload and might not even `clean`
if it's not found.
Change-Id: If5f8f4ecce317e54cd4b5688553cc38220f6e6df
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36461
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Mark TSEG as reserved, which is done on other platforms as well.
For some reason CorebootPayloadPkg crashes when using the region where
TSEG typically resides, which is basically RAM.
UefiPayloadPkg doesn't show this issue.
Change-Id: I3ae3659349d2a88bc3575fe9675433c054e28832
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50267
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
- Add Kconfig option to hide the Management Engine Interface device so
the OS doesn't try to access it, if the Management Engine is in an
inoperable mode, e.g. if me_cleaner is used.
- Also hide the MEI if the ME is in Soft Temp Disable mode.
Change-Id: Ie4a35bf5fc196e0a02b7591cdb8633d38f0c7f3e
Signed-off-by: James Ye <jye836@gmail.com>
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39074
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Updating from commit id a1afae4:
2019-10-02 11:47:45 +0000 - (juniper: initial setup)
to commit id a2390f3:
2020-12-01 08:35:44 +0000 - (servo_v4/usb_pd_policy: Reject SNK->SRC power swap if CC_ALLOW_SRC not set)
This brings in 4022 new commits.
Change-Id: Ib13921aa78a60f88455223eff602296abc424ca8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48212
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch includes the bootblock and verstage changes for
shadowmountain board.
BUG=b:175808146
TEST= Build and boot shadowmountain board till early romstage.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I5f805baf42203306ff10e91a258d9117dd986c4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Configure the I2C bus high and low time for all enabled I2C buses.
BUG=b:179100924
TEST=Measured the I2C bus frequency as 384 KHz, high time as 924 ns and
low time as 1680 ns.
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: I1525ecbf5baf9ae169afd7ce59079f395a2a45a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
There has been some repeated discussion about how header includes should
be formatted, specifically on the topic of chain-including. The coding
style currently doesn't say anything about the topic but clearly people
have some basic assumptions. This patch tries to codify some common
ground rules that are supposed to reflect the existing practice.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ibbcde306a814f52b3a41b58c7a33bdd99b0187e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Add support for MP services2 PPIs, which is slight modification
over MP services 1 PPIs. A new API StartupAllCPUs have been added
to allow running a task on BSP and all APs. Also the EFI_PEI_SERVICES
parameter has been removed from all MP PPI APIs.
This implementation also selects the respective MP services PPI version
supported for SoCs
BUG=b:169196864
Change-Id: Id74baf17fb90147d229c78be90268fdc3ec1badc
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change drops the config FSP_PEIM_TO_PEIM_INTERFACE.
FSP_PEIM_TO_PEIM_INTERFACE is used for:
* Auto-selecting FSP_USES_MP_SERVICES_PPI
* Including src/drivers/intel/fsp2_0/ppi/Kconfig
* Adding ppi to subdirs-y
* Setting USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI to y
and is selected by SoCs that want to enable MP PPI services.
Instead of using the indirect path of selecting MP PPI services, this
change allows SoC to select FSP_USES_MP_SERVICES_PPI directly. The
above uses are handled as follows:
* Auto-selecting FSP_USES_MP_SERVICES_PPI
--> This is handled by SoC selection of FSP_USES_MP_SERVICES_PPI.
* Including src/drivers/intel/fsp2_0/ppi/Kconfig
--> The guard isn't really required. The Kconfig options in this
file don't present user prompts and don't really need to be guarded.
* Adding ppi to subdirs-y
--> Makefile under ppi/ already has conditional inclusion of files
and does not require a top-level conditional.
* Setting USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI to y
--> This is set to y if FSP_USES_MP_SERVICES_PPI is selected by SoC.
TEST=Verified that timeless build for brya, volteer, icelake_rvp,
elkhartlake_crb and waddledee shows no change in generated coreboot.rom
Change-Id: I0664f09d85f5be372d19925d47034c76aeeef2ae
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50274
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It was commented that the need for the delay was mainly related
to external displays and only with VBIOS execution. Move the
delay such that it is done only when we actually need to execute
the VBIOS aka option rom.
A delay is currently only defined for librem/purism_bdw in
its Kconfig. As the description of the issue sounds like it
would equally happen on other platforms when VBIOS is involved,
promote the Kconfig visible option to global scope.
Change-Id: I4503158576f35057373f003586bbf76af4d59b3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
For the moment, these are most not used but become a necessity
for a unified <soc/nvs.h> approach.
They would be required for the implementation of _SWS method
for OSPM to determine the reason for system waking up. The related
hardware registers are present with these platforms.
It's expected that ACPI power-management related GNVS entries are
grouped together to form a single struct in later works.
Change-Id: I6d31d39ac1017cd6fdf0ac66b418d1fbb1edf8e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50193
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
add UPD for RV2 USB3 phy setting adjust.
Note: it only for RV2 silicon and not available for RV/PCO.
Usb 3.1 PHY Parameters:
1. RX_EQ_DELTA_IQ_OVRD_VAL
-Override value for rx_eq_delta_iq. Range 0-0xF
2. RX_EQ_DELTA_IQ_OVRD_EN
-Enable override value for rx_eq_delta_iq. Range 0-0x1
3. Override value for rx_vref_ctrl. Range 0 - 0x1F
4. Enable override value for rx_vref_ctrl. Range 0 - 0x1
5. Override value for tx_vboost_lvl: 0 - 0x7.
6. Enable override value for tx_vboost_lvl. Range: 0 - 0x1
7. Override value for rx_vref_ctrl. Range 0 - 0x1F
8. Enable override value for rx_vref_ctrl. Range 0 - 0x1
9. Override value for tx_vboost_lvl: 0 - 0x7.
10. Enable override value for tx_vboost_lvl. Range: 0 - 0x1
BUG=b:175192931
TEST=Build/verify the valule will been apply on dirinboz
Change-Id: I1d5f69e840952cc5171af1ce8597628d1bede5cb
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50240
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The offsets of ACPI_CPU_CONTROL and ACPI_GPE0_BLK match the ones from
the reference code, but not the PPR. I've submitted a change request for
the PPR, so this mismatch might go away in the future. The case for
HAVE_SMI_HANDLER will be implemented in a future patch. If that one ends
up being identical to the function in soc/amd/picasso, I'll move it to
the common AMD SoC code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If80b841df12d351d5a0c1e0d2e7bf1e31b03447f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
This was the only I/O base address in Kconfig, no board changed it and
if a board changed it, it needs to make sure that it won't overlap with
other I/O resources, so just use the same value as constant in the
define instead of the value from Kconfig. Also remove the PICASSO_
prefix from ACPI_IO_BASE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7ea62f1101ddefa8785da92de5ba2aaf7945694a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Make it clearer all the GPIO bank register programming
parameters originate from the same soc_amd_gpio entry.
Change-Id: I7aa6bd6996fd14dde4b1abcccbd2ae6ef933c87b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42691
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Do this to reduce indentation a bit. Also it may be desireable
to group GPIO configuration such that some GPIOs are handled
outside program_gpios() call and would not be included in
gpio_list array.
Change-Id: I46cbe33f4d85cd9c7d70f96df82ee9b8ffe50a00
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42807
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For MT8192 MCUs, replace LZMA compression with LZ4 to speed up boot
process. The loading (plus decompression) time of mcupm.bin and sspm.bin
is consistently reduced by 8ms, respectively.
BUG=b:177389446
TEST=emerge-asurada coreboot
TEST=Hayato booted up
BRANCH=none
Change-Id: Ida35e7f6e0572ad43082e53bcc69bc708cf7da44
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
First and last printk() log the same string.
Add done at end of function.
BUG = N/A
TEST = Build and boot faceboot FBG1701
Change-Id: I66a64c7473a65206c3a4c4396c8c8ecba1eb1a57
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Revise the following aspects to follow coreboot's coding style:
- Drop braces for single-statement condition and loop bodies.
- Use `__func__` to print the current function's name.
- Reflow pointer dereferences to fit in a single line.
- Adjust the `*` position in pointer variable declarations.
- Drop unnecessary `else` statements.
BUG = N/A
TEST = Build Compulab Intense-PC with secure oprom enabled
Change-Id: I780251d946d5bea97658476d61d25555ec768dfc
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Override SMBIOS type 4 max speed. This field should be maximum speed
supported by the system. 3900MHz is expected for Cooper Lake.
Tested=Execute "dmidecode -t 4" to check max speed is correct.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I67edf657a2fe66b38e08056d558e1b360c4b8adc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48640
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Now smbios type 4 max speed field will use the maximum speed of
processor itself if CPUID value can be accessed. However, this field
should be the maximum processor speed supported by the system. Here
we use smbios_cpu_get_max_speed_mhz only to get correct value.
Tested=Execute "dmidecode -t 4" to check max speed is correct.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: Iae8e01a5e455709a57d60a840f279685c8aab80f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48636
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add ACPI support for battery, AC and lid.
I don't have MacBook Air 4,2 to test, but:
- I tested it on 5,2;
- I found decompiled DSDT for 4,2 and compared registers and bits,
they are the same as on 5,2.
So it should work.
Change-Id: I592cb4501c878fe46684a524e729d32fb1d7920c
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33103
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Refactor PCIE port config structure. Make it easier to map from
schematic. We don't have to convert the PCIE ports RP number and
CLK source in devicetree. All the convert will be done by SoC level.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I0b390e43f8e99b19cfad178139b86a2f77d7a57b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This is what Lynxpoint does. It is equivalent, but simpler.
Change-Id: Ifdbb291a6cea0bb29b4e46c7a33c5abe61dbe86b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47045
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Move ACPI code for Apple MacBooks to a separate directory to avoid
its duplication in mainboards
- Add AC and lid implementations for newer generations
- Rewrite old code using the new ASL syntax
Tested on MBA 5,2, MBP 8,1 and MBP 10,1.
Change-Id: I3d4585aac8e3ebbfed6ce4d4e39fbc33ac983069
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Create `FIXED_RCBA_MMIO_BASE` and use it everywhere, except in cases
where a pointer cast would be necessary. Instances in Sandy Bridge MRC
code were left as-is intentionally, so as not to collide with another
cleanup patch train.
Tested with BUILD_TIMELESS=1, these boards remain identical:
- Asus P8Z77-V LX2
- Packard Bell MS2290
Change-Id: I642958fbd6f02dbf54812d6a75d6bc3087acc77a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50036
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Nico Huber