With CB:32726 ("lib/timestamp: Make timestamp_sync_cache_to_cbmem() in
postcar") timestamps are synced from cache to cbmem in postcar as
well. For postcar, the cache lives in BSS just like ramstage. This
change updates TIMESTAMP_CACHE_IN_BSS to include both ramstage and
postcar and uses this instead of ENV_RAMSTAGE to check for cache
location.
Ideally, it would be good to get rid of timestamp cache in postcar and
ramstage completely since early cbmem init is enabled by default in
coreboot and it is guaranteed that cbmem is recovered before
timestamps are added in ramstage or postcar. This change is being
pushed in as a temporary fix while I make the changes to remove
timestamp cache from romstage and postcar completely.
BUG=b:132939309
Change-Id: I2d82a96aba954df77c9386b7bd2e2ec0973881be
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
The VPD field name is dock_passthrough, not dock_passthru. Fix it.
(I assume there is no length limit)
BUG=b:132689337
TEST=check that the feature can now be controlled by the associated
enterprise policy
Change-Id: Icc2b070313fde74447279cd6ccaa4e3eb6d119ee
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32839
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
According to JEP106 from JEDEC, fix manufacture ID of Crucial,
Super Talnet and Micron.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I10a268a7f3bde405b95bd3a16d5d121be623c7ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Fill the DIMM serial number field for SMBIOS from the saved SPD
data that is returned by FSP.
BUG=b:132970635
TEST=This was tested on sarien to ensure that SMBIOS type 17
filled the serial number from the DIMM:
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Locator: DIMM-A
Serial Number: 41164beb
Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Set the system serial number from the VPD key "serial_number" and
the mainboard serial number from the VPD key "mlb_serial_number".
BUG=b:132970635
TEST=check serial number is set in SMBIOS based on VPD, and if there
is no VPD key found then it is empty.
Change-Id: Ia8f1486dcb1edc968b8eb1e6d989b10c05913aca
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This fixes the following changes, which made qualcomm Kconfig
appear on all platforms:
bd0b51c0be7a3e46d767
Use proper Kconfig logic.
Change-Id: I0195fd186ac39dd4258fe0781dd6d3d1b1d1679f
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32805
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Clang does not recognize dead_code() as termination of execution. It
gives this message:
error: control reaches end of non-void function
[-Werror,-Wreturn-type]
This change adds an __attribute__((noreturn)) to ensure that clang
recognises that this function will terminate execution.
This change is more general solution to the problem that was addressed
in the specific at https://review.coreboot.org/c/coreboot/+/32798
Signed-off-by: Alan Green <avg@google.com>
Change-Id: I5ba7189559aa01545d5bbe893bced400a3aaabbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Move the DMI initialization code to northbridge folder.
Leave southbridge specific settings in bd82x6x folder and call it from
northbridge code.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ib0b47391f3309f9ab0c3a3a8d525f38f8cca73c0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Use RCBA and DMIBAR macros to get rid of DEFAULT_RCBA and DEFAULT_DMIBAR.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to OS, no errors visible in dmesg.
Change-Id: Ic9be2240ea10b17c8cc289007dccadbb9e3f69ab
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Add a few comments and use known register values.
Based on the "2nd Generation Intel® Core™ Processor Family Mobile"
datasheet and the existing serialice trace.
Tested on Lenovo T520 (Intel Sandy Bridge).
Still boots to GNU/Linux.
Change-Id: I404515b77a22324f55581f117d79630be4ba64dd
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32071
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
- Enable LPC TPM support in Kconfig and add pc80/tpm to devicetree
- Enable VBT support in Kconfig and add VBT files extracted from
vendor firmware
- Remove IGPU VBIOS entries from Kconfig
- Remove unused PS2 definitions in superio.asl
- Add PWRB ACPI device entry to mainboard.asl
- Remove duplicate chipset register initialization from mainboard.c
- Move ITE Super I/O configuration to mainboard_config_superio in
romstage.c
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I2d11c55dc809b920bccf55f5f745d9f29b18bbb6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
That's how we do it these days.
Change-Id: I1c088d23dff709bcdcb21310059e6a2aab84c0be
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
That's how we do it these days.
Change-Id: I6bf6460440d0f2e6973734ba8894a4be981d03c5
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Needed to make libpayload build clean with -Wconversion.
BUG=b:111443775
BRANCH=none
TEST=make junit.xml shows fewer warnings with -Wconversion enabled
Change-Id: Ie193e39854d2231b6d09a2b0deeeef2873e900ab
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Previously cpu_index() always succeeded, but since commit 095c931
(src/arch/x86: Use core apic id to get cpu_index()) it is now possible
for it to indicate an error by returning -1. This commit adds error
handling for all calls to cpu_index(), and restores several checks that
were removed in commit 7c712bb (Fix code that would trip -Wtype-limits)
but are now needed.
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I5436eed4cb5675f916924eb9670db04592a8b927
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
- The link to create an account is now "Sign in" and not "Register"
- Use monospace formatting for terminal commands and file names
- Properly escape less-than and greater-than
- Correct the 'make lint' example command
- Reformat example commit messages
- Add formatting for website links
- Other whitespace fixes
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I9931bef8c30387d1c08b59973d6de9b5c0419814
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
The FSP will lock down the configuration of GPP_A12, which
makes the configuration of the GPIO pin on warm reset not
work correctly.
This is only needed for the Arcada variant since it is the only variant
that uses ISH.
BRANCH=sarien
BUG=b:132719369
TEST=ISH_GP6 now works on warm resets on arcarda
Change-Id: Icb3bae2c48eee053189f1a878f5975c6afe51c71
Signed-off-by: Jett Rink <jettrink@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32831
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Relocate the I2C bus reset code from gpio.c to i2c.c. When it first
went in, gpio.c was a natural location due to the nature of the
algorithm. This is preparation for moving most of gpio.c to common
code.
Change-Id: I3b2d8e1b54e7c5929220d763bd99fe01b0636aaa
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32650
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move the stoneyridge AcpiMmio code into soc/amd/common.
The SB800 southbridge introduced the MMIO hardware blocks at 0xfed80000
commonly known as AcpiMmio. Implementations beginning with Mullins
enable decode in PMx04. Older designs use PMx24 and allow for
configuring the base address. Future work may support the older version.
Comparing the documentation for AMD's RRGs and BKDGs, it is evident that
the block locations have not been reassigned across products. In some
cases, address locations are deprecated and new ones consumed, e.g. the
early GPIO blocks were simpler at offset 0x100 and the newer GPIO banks
are now at 0x1500, 0x1600, and 0x1700.
Note: Do not infer the definitions within the hardware blocks are
consistent across family/model products.
BUG=b:131682806
Change-Id: I083b6339cd29e72289e63c9331a815c46d71600d
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32649
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We need to store the acpi_gpio struct, not save its address.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I41c8bf10ce72bec736da97ccc33f9ada49804dc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
The 'last' variable is unused, and has been for the entire history of
this file.
Found-by: Clang Static Analyzer
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: Ic86a6d8d2b47585f901f1e48ae88735534c834ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Martin Roth <martinroth@google.com>
Signed-off-by: Alex James <theracermaster@gmail.com>
Change-Id: I688cb60c98370bf74aa8554bab43594ff84c4e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This allows for serial console during the bootblock and enables
bootblock console by default.
Change-Id: I7746e4f819486d6142c96bc4c7480076fbfdfbde
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Previously broadwell used a romcc bootblock and starting verstage in
romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also
possible to have a separate verstage.
This selects using a separate verstage by default but still keeps the
option around to use verstage in romstage.
With a separate verstage the romstage becomes an RW stage.
The mrc.bin however is only added to the RO COREBOOT fmap region as it
requires to be run at a specific offset. This means that coreboot will
have to jump from a RW region to the RO region for that binary and
back to that RW region after that binary is done initializing the
memory.
Change-Id: I900233cadb3c76da329fb98f93917570e633365f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30384
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This puts the cache-as-ram init in the bootblock.
Before setting up cache as ram the microcode updates are applied.
This removes the possibility for a normal/fallback setup although
implementing this should be quite easy.
Setting up LPC in the bootblock to output console on SuperIOs is not
done in this patch, therefore BOOTBLOCK_CONSOLE is not yet selected.
Change-Id: I44eb6d380dea5b82e3f009a46381a0f611bb7935
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30383
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
The only functional difference is the use of stack guards.
Change-Id: I95645271e0d93a97f544a1cc4e9a4320738e6a20
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Free several resources when AHCI initialization fails. Note that it is
only safe to free resources when the command engine has stopped, since
otherwise they may still be used for DMA.
Found-by: Coverity CID 1260719, 1260727, 1261090, 1261098
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Change-Id: I6826d79338b26ff9696ab6ac9eb4c59f734687d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32778
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
As of CL:1605641, vboot2 code should be used for setting and
checking display init state. Remove all vboot1 OPROM-related
code, and use the vboot2 display init code which has already
been added in previous commits.
coreboot should not be reading vboot NVRAM flags directly.
Remove the function vboot_wants_oprom(), and instead rely on
display_init_required(), which uses the
VBOOT_WD_FLAG_DISPLAY_INIT value stored in
vboot_working_data.flags, initialized during verstage.
Note that this means in the case of CONFIG_VBOOT=y, the return
value of display_init_required() can only be trusted after
verstage has been executed. This should not be a problem
assuming that all display initialization occurs in ramstage.
BUG=b:124141368, b:124192753, chromium:948529
TEST=Build locally
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: Ic8f9dc5a3c7f1546a8fed82bde02be4d04568f8d
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1605641, chromium:1605525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32723
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Verified Boot OPROM code is being refactored. OPROM is being
generalized into "display initialization". As such, the NVRAM
request flag is being renamed from OPROM_NEEDED to
DISPLAY_REQUEST.
BUG=b:124141368, b:124192753, chromium:948529
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I74374abf7d1deb594c073f7a4a76c9de46092143
Signed-off-by: Joel Kitching <kitching@google.com>
Cq-Depend: chromium:1605640
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32720
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Based on IT8786E-I V0.4.1 datasheet with following remark:
"Please note that the IT8786E-I V0.4.1 is
applicable only to the D version."
Signed-off-by: Kyösti Mälkki <kyosti.malkki@3mdeb.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I7317da6a72db64f95f9a790ef96ed7a5f93b3aea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30335
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
If username is not set, then the ssh option is not available.
This was initially confusing for me.
Signed-off-by: Alan Green <avg@google.com>
Change-Id: I731c29a1daa9f8c298710471c7d1fe758b059d08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Mike Banon <mikebdp2@gmail.com>
We need to support entering D3Cold from the OS to work around a bug in
the SDHC where the data lines get stuck always reading zeros.
BUG=b:122749418
TEST=Verified the linux kernel can transition between D3 and D0. Also
verified that the device can suspend and resume and continue to have a
functioning SD controller after.
Change-Id: Ifbf48f20c03a752ce3ff773296b536e92db16a62
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
This patch adds a workaround for Samsung C-die 2G/4G memory chips.
For unknown reasons, some boards with Samsung LP3 memory chips
could not pass early CS/CMD training. MRC has to change the
granularity from 16 ticks to 8 ticks, which implies bad margin
with this memory chip. Another way is to enhance the drive
strength for CS. This patch is to enhance the drive strength for CS
and CMD. Enhancing the drive strength for CMD could gain margin abaout
3 more ticks. Root cause needs to be further investigated with memory
vendor.
BUG=b:131177542
BRANCH=None
TEST=USE=fw_debug emerge-atlas chromeos-mrc coreboot chromeos-bootimage
& check the MRC log to ensure correct Rcomp values are passed to
MRC. Tested with board ID #8 and #11.
Change-Id: I9ea3ceda8dc8bf781063d3c16c7c2d9b44e5ddd6
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@google.com>
Call the raminit from a common location instead of from the mainboard
specific code.
Change-Id: I65d522237a0bb7b2c032536ede10e2cf93c134d8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32760
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
To improve the bootflow, the scope of the pei_data needs to be
extended.
Change-Id: Ic6d91692a7bf9218b81da5bb36b5b26dabac454e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32762
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Furquan Shaikh