The bootblock must be 16-bit aligned for it to boot.
BUG=b:159081993
TEST=Made sure trembyle still compiles.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I29c244a3f08df46c5992fe81683b9c0d740ff248
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Skip sending MboxBiosCmdSxInfo for sleep states other than S3. The
PSP only acts on S3 and ignores all others. As a result, the command
register is not cleared upon return and coreboot reports a timeout.
BUG=b:153622879
TEST=Use halt from command line, verify command skipped.
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ic47b8507e29e4c53898e88fb46e532b71df87d07
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
eSPI interrupts are active level high. The eSPI polarity register
in the chipset inverts incoming signals if the corresonding bit
is 0 in the register. Therefore, all active high (edge or level)
virtual wire interrupts need to ensure they are not inverted.
And really the sender of the interrupts should be conforming to the
the eSPI spec. As such inverting any signals should not be necessary,
but this register in the chipset allows for fixing up those misbehaviors.
BUG=b:157984427
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7346bb0484506d96d7ab2e6d046ffa0571683a48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This change adds support in ACP device driver to generate I2S machine
device (AMDI5682) in SSDT. It expects mainboard to provide chip config
`dmic_select_gpio` that can be passed as `dmic-gpios` in _DSD for the
device.
BUG=b:157603026
TEST=Verified that I2S machine device is correctly generated for
trembyle.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I22ab53d7d68c6e042e467e598d688e360d28586f
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252557
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The ACPI code was not masking off the correct bits for publishing
the SPI bar to the OS.
It resulted in a dmesg messagelike:
system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
And /proc/iomem entry
fec10002-fec11001 : pnp 00:00
These addresses are wrong because they are including bits of a
register that are not a part of the address.
Moreover, the code does not publish the eSPI register area either.
The eSPI registers live at 0x10000 added to the SPI bar. Lastly,
both regions are less than a page so only report a page of usage
for each.
Stoney Ridge's SPI bar register defines the address as 31:6 while
Picasso's SPI bar register defines the address as 31:8. Use Picasso's
valid mask for both cases because no one is assigning addresses
that are aligned to less than 256 bytes.
With the fixes, dmesg reports:
system 00:00: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:00: [mem 0xfec20000-0xfec20fff] has been reserved
And /proc/iomem indicates:
fec10000-fec10fff : pnp 00:00
fec20000-fec20fff : pnp 00:00
BUG=b:160290629
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I130b5ad26d9e13b44c25fbb35a05389f9e8841ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42959
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change clears interrupt and wake status for a pad when
configuring it. This ensures that stale interrupts/wake notifications
are flushed out and do not cause spurious wakes in future suspends.
BUG=b:159944426
Change-Id: Ia4ebd975312a4136f1d0690d7af7372615e31f0f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42877
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`flags` field of soc_amd_gpio structure is set only for SCI and SMI
configurations. This change adds a new helper macro
PAD_CFG_STRUCT_FLAGS that allows setting of all soc_amd_gpio members
including `flags` field. This can be used directly by PAD_SCI and
PAD_SMI. For all other pad configurations, PAD_CFG_STRUCT macro uses
PAD_CFG_STRUCT_FLAGS with flags set to 0. This allows dropping of
redundant parameter 0 for flags for all other pad configurations.
BUG=b:159944426
Change-Id: I835b62f5502375ffc4215548b51338a67546d699
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently, for Stoneyridge and Picasso mainboards, pads that are
configured for SCI/SMI/WAKE need to have multiple entries in the
configuration table - one for PAD_GPI and other for the special
configuration that is required. This requires a very specific ordering
of pads within the table and is prone to errors because of conflicting
params provided to the different entries for the same pad. This also
does not work very well with the concept of override GPIOs where the
entry in base table is overridden with the first matched entry from
the override table.
This change updates the way GPIO configuration is handled for special
routing like SCI/SMI/WAKE/DEBOUNCE by setting the control field of
soc_amd_gpio structure in the macros performing these
configurations. Also, program_gpios() is updated to perform a write to
GPIO control register instead of read-modify-write. This is because
mainboard is expected to provide only a single configuration entry for
each pad within a given table. Thus, there is no need to preserve
earlier configuration.
Mainboards that were providing multiple entries for a single pad are
updated accordingly.
BUG=b:159944426
Change-Id: I3364dc2982d66c4e33c2b4e6b0b97641ebea27f0
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42875
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Some codepaths want to set selected bits of a hardware register
to match those of a given variable in memory. Provide a helper
function for this purpose and use it in gpio_set(),
gpio_input_pulldown() and gpio_input_pullup().
This change also adds GPIO_PULL_MASK and updates GPIO_OUTPUT_MASK to
include all bits dealing with pull and output respectively.
Change-Id: I4413d113dff550900348a44f71b949b7547a9cfc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change adds helper macro PAD_CFG_STRUCT for setting the fields
of `soc_amd_gpio`. Additionally, macros are added for different
operations i.e. pull, output, trigger, int_enable, event_trigger,
wake_enable, debounce, etc. All GPIO configuration macros are updated
to use PAD_CFG_STRUCT instead of setting the fields directly.
BUG=b:159944426
Change-Id: I03535d2da0c05f72c4163fa30d72f9c6df44908b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change updates the macros for GPIO debounce to add _DEB_ in the
name. This is done to make the names consistent with rest of the GPIO
control field names.
BUG=b:159944426
Change-Id: Ic47678108c871c5f1cd0d512783230f18adf3484
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42871
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This change renames GPIO macros as follows:
1. Pad filtering macros are renamed to GPIO_TRIGGER_ and
GPIO_ACTIVE_. This determines the filtering applied on the input
signal at the pad.
2. Interrupt enabling macros are renamed to GPIO_INT_ENABLE_.
_INT_ is dropped from pad filtering macros because the filtering
applies to the input signal irrespective of how it is routed. It is
applied at the pad not only for GPIO interrupts but also for other
routes i.e. SCI, SMI, etc.
BUG=b:159944426
Change-Id: Id0ad770be77409aaaae4cc135945e2815ce97030
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42870
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
`soc_amd_gpio` structure uses a flag field to store additional
information about GPIO configuration that does not end up directly in
the GPIO control register. However, the naming for these flags is not
consistent across event triggers and special configurations. This
change updates the flag names to be consistent (starting with
GPIO_FLAG_*) and adds some helper functions for GPIO events.
In the following CLs, more changes will be made to drop some of the
special flags which are not really required.
BUG=b:159944426
Change-Id: Idca795c3e594eb956d297d5ba5d08f75b5563ee5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42869
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Bring all GNVS related initialisation function to global
scope to force identical signatures. Followup work is
likely to remove some as duplicates.
Change-Id: Id4299c41d79c228f3d35bc7cb9bf427ce1e82ba1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42489
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
There is no GPIO_63 but the register position is used for
interrupt controls.
Change-Id: I754a2f6bbee12d637f8c99a9d330ab0ac8187247
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42686
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The banks are one after each other in the ACPIMMIO space. Also
there is space for more banks and existing ASL takes advantage
of the property.
Change-Id: Ib78559a60b5c20d53a60e1726ee2aad1f38f78ce
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42522
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Future implementation of verstage running on PSP will have access
to some of the ACPIMMIO banks, but banks will be mapped runtime
at non-deterministic addresses. Provide preprocessor helpers to
accomplish this.
Change-Id: I8d50de60bb1ea1b3a521ab535a5637c4de8c3559
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Using proper symbols for base addresses, it is possible to
only define the symbols for base addresses implemented for
the specific platform and executing stage.
Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort
connectivity. While Dali can either be fused-down PCO or RV2 silicon,
Pollock is always RV2 silicon.
Since we have all boards using this code in tree right now,
soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku().
Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit 4883252912.
Almost everything in <amdblocks/acpimmio_map.h> is invalid for PSP as
it does not have the same view of memory space.
The prototypes xx_set/get_bar() are only valid for PSP as x86 cores
will use the constant mapping defined in <amdblocks/acpimmio_map.h>
The selected MMIO base address model depends of the architecture the
stage is built for and, to current knowledge, nothing else. So
the guards should have been with ENV_X86 vs ENV_ARM and not about
CONFIG(VERSTAGE_BEFORE_BOOTBLOCK).
For the ENV_ARM stage builds, <arch/io.h> file referenced in the
previously added mmio_util_psp.c file has not been added to the tree.
So there was some out-of-order submitting, which did not get caught
as the build-testing of mixed-arch stages has not been incorporated
into the tree yet.
The previously added file mmio_util_psp.c is also 90% redundant with
mmio_util.c.
Change-Id: I1d632f52745bc6cd3c3dbddb1ea5ff9ba962c2e8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42486
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The host bridge's resources covering bus numbers assumed
256 buses were being decoded. However, MMCONFIG was only
covering 64 buses. This results in Linux complaining:
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000
[bus 00-3f] only partially covers this bridge
When retrieving the host bridge's resources fix up the
bus numbers to utilize MMCONF_BUS_NUMBER Kconfig. I couldn't
keep IASL from complaining when trying to do this statically.
BUG=b:158874061
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ief1901743e2c99f583ef0181490d493d23734f64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
According to the ACPI specification, version 6.3:
OSPM accesses GPE registers through byte
accesses (regardless of their length).
So, reporting dword-sized access is wrong and means nothing anyway.
Tested on Asus P8Z77-V LX2, Windows 10 still boots.
Change-Id: I965131a28f1a385d065c95f286549665c3f9693e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42671
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Commit 9550e97 [acpi: correct the processor devices scope] changed
the default CPU scope from _PR to _SB, but the default prefix in
Stoneyridge's Kconfig was missed, leading to ACPI errors for
'AE_NOT_FOUND for object \_PR.P00n.' Fix the default prefix and
eliminate the errors reported in dmesg.
Test: boot Linux w/5.3 kernel on google/liara, check for errors
Change-Id: I5611b6836062a0a9f90036d7fe40cd98bd730af3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Except for whitespace and varying casts the codes were
the same when implemented.
Platforms that did not implement this are tagged with
ACPI_NO_SMI_GNVS.
Change-Id: I31ec85ebce03d0d472403806969f863e4ca03b6b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42362
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The assumption up to this point was that if the system had an x86
processor, verstage would be running on the x86 processor. With running
verstage on the PSP, that assumption no longer holds true, so exclude
pieces of code that cause problems for verstage on the PSP.
This change will add these files to verstage only if the verstage
architecture is X86 - either 32 or 64 bit.
BUG=b:158124527
TEST=Build and boot on Trembyle
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I797b67394825172bd44ad1ee693a0c509289486b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42062
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Picasso's BERT region should not have been moved to cbmem in commit
901cb9c "soc/amd/picasso: Move BERT region to cbmem". This
causes an error of "APEI: Can not request [] for APEI BERT registers.
FSP has been modified to set aside a requested region size for BERT,
simiar to TSEG. Remove the cbmem reservation and locate the region
by searching for the HOB.
BUG=b:136987699
TEST=Check that BERT is allocated
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I20e99390141986913dd45c2074aa184e992c8ebb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42530
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This allows the kernel to runtime suspend these devices and properly
shut them down. If a tty is not used, the kernel will disable the
device.
I omitted UART0 because the PSP will not power the controller before
accessing it. This causes PSP boot failures. See b/158772504. We also
can't enable UART0 D3 until we stop using the mmio kernel command line
`console=uart,mmio32,0xfedc9000`. The kernel will suspend the UART
controller before it notices that the mmio address matches ttyS0. This
causes the kernel to fail writing to the UART. So we need to move over
to `console=ttyS0`.
BUG=b:153001807, b:157617092, b:157858890, b:158772504
TEST=Boot trembyle and see I2C devices entering and exiting D3.
* See the UART devices entering D3
* Made sure the i2c peripherals were still functional.
* Ran suspend stress test for 40+ iterations.
[ 0.349094] power-0362 __acpi_power_on : Power resource [FUR1] turned on
[ 0.350627] power-0362 __acpi_power_on : Power resource [FUR2] turned on
[ 0.352094] power-0362 __acpi_power_on : Power resource [FUR3] turned on
[ 0.353626] power-0362 __acpi_power_on : Power resource [I2C2] turned on
[ 0.376980] power-0362 __acpi_power_on : Power resource [PRIC] turned on
[ 0.399997] power-0362 __acpi_power_on : Power resource [PRIC] turned on
[ 0.401953] power-0362 __acpi_power_on : Power resource [I2C3] turned on
[ 0.403460] power-0362 __acpi_power_on : Power resource [I2C4] turned on
[ 0.483646] power-0418 __acpi_power_off : Power resource [I2C4] turned off
[ 1.028404] power-0418 __acpi_power_off : Power resource [I2C3] turned off
[ 1.448426] power-0418 __acpi_power_off : Power resource [I2C2] turned off
[ 5.308094] power-0418 __acpi_power_off : Power resource [FUR1] turned off
[ 5.340833] power-0418 __acpi_power_off : Power resource [FUR2] turned off
[ 5.382041] power-0418 __acpi_power_off : Power resource [FUR3] turned off
[ 5.423861] power-0362 __acpi_power_on : Power resource [I2C3] turned on
[ 6.698225] power-0362 __acpi_power_on : Power resource [I2C2] turned on
[ 6.856573] power-0418 __acpi_power_off : Power resource [I2C3] turned off
[ 8.246970] power-0418 __acpi_power_off : Power resource [I2C2] turned off
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I04c4a729d4cb9772ab78586fdbb695b450cc1600
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change selects IDT_IN_EVERY_STAGE so that the interrupt handlers
are provided for all stages.
Change-Id: I25ced7758264fb14998ab5f31ff778c1af11eb05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Most LAPIC registers are 32bit, and thus the use of long is valid on
x86_32, however it doesn't work on x86_64.
* Don't use long as it is 64bit on x86_64, which breaks interrupts
in QEMU and thus SeaBIOS wouldn't time out the boot menu
* Get rid of unused defines
* Get rid of unused atomic xchg code
Tested on QEMU Q35 with x86_64 enabled: Interrupts work again.
Tested on QEMU Q35 with x86_32 enabled: Interrupts are still working.
Tested on Lenovo T410 with x86_64 enabled.
Change-Id: Iaed1ad956d090625c7bb5cd9cf55cbae16dd82bd
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36777
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
We are currently relying on the assumption that the amdcompress tool
will zero out the bss section. Instead of relying on this assumption,
lets explicitly clear it.
The implementation was copied from assembly_entry.S.
BUG=b:147042464
TEST=Cold boot trembyle and also s3 resume trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifb4f4cc6932dd4c3c92d4e7647569f9a0c69ea4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This change is required so we have a defined entry point on S3. Without
this, the S3_RESUME_EIP_MSR register could in theory be written to
later which would be a security risk.
BUG=b:147042464
TEST=Resume trembyle and see bootblock start.
coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 smm starting (log level: 8)...
SMI# #6
SMI#: SLP = 0x0c01
Chrome EC: Set SMI mask to 0x0000000000000000
Chrome EC: Set SCI mask to 0x0000000000000000
Clearing pending EC events. Error code EC_RES_UNAVAILABLE(9) is expected.
EC returned error result code 9
SMI#: Entering S3 (Suspend-To-RAM)
PSP: Prepare to enter sleep state 3... OK
SMU: Put system into S3/S4/S5
Timestamp - start of bootblock: 18446744070740509170
coreboot-4.12-512-g65779ebcf73f-dirty Thu Jun 4 22:38:17 UTC 2020 bootblock starting (log level: 8)...
Family_Model: 00810f81
PMxC0 STATUS: 0x200800 SleepReset BIT11
I2C bus 3 version 0x3132322a
DW I2C bus 3 at 0xfedc5000 (400 KHz)
Timestamp - end of bootblock: 18446744070804450274
VBOOT: Loading verstage.
FMAP: area COREBOOT found @ c75000 (3715072 bytes)
CBFS: Locating 'fallback/verstage'
CBFS: Found @ offset 61b80 size cee4
PROG_RUN: Setting MTRR to cache stage. base: 0x04000000, size: 0x00010000
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I4b0b0d0d576fc42b1628a4547a5c9a10bcbe9d37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Files are both identical and common for both SoCs.
Change-Id: I54b78108d342a0fd03bf70ffe6a09695c5678eb4
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42545
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Move uart_platform_base and uart_platform_refclk to their own
compilation unit to avoid preprocessor usage. The newly created
compilation unit is only added to the build when PICASSO_CONSOLE_UART
is selected.
Change-Id: I56911addc8c000a0772156e5166720867cdd26fe
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42517
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If we are not using the UARTs or they don't have the correct GPIOs
configured we should let the mainboard disable them.
BUG=b:153001807
TEST=Dump SSDT and see UART device is disabled
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifc04e36e0ebe5cce4b6cc228c7174dc76f2ffa4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
The option to have amdfw outside of CBFS used dd to write amdfw at a
given location overwriting anything that was there before, which may
cause the build to fail due to the FMAP header being overwritten
resulting in a not too obvious error that the image is a legacy image
without FMAP header.
Mandolin was the only board using this functionality, but I fixed the
placement of components in the flash image there, so that amdfw can just
be placed in CBFS avoiding those problems.
Change-Id: I0f3abab9d3939da43e1681d5cfe2c8d494402acf
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42438
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This reverts commit d5f1e0f973.
Reason for revert: FSP-S is now fixed to not touch the SPI
configuration registers. Thus, coreboot does not need to reconfigure
SPI after FSP-S has run.
BUG=b:153506142
TEST=Verified that SPI configuration registers look the same before
and after FSP-S has run. em100 works fine without any additional
changes in coreboot to reconfigure SPI.
Change-Id: I4832e62e0331aa39abe0cca7725915262bb2cf83
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin Frodsham <justin.frodsham@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The PICASSO_UART Kconfig option is about using the internal MMIO UART
controllers in Picasso for console, so rename it to PICASSO_CONSOLE_UART
Change-Id: I38ac9ee96af826fe49307b4d0e055a43fcbd4334
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
